barebox on gta04
Hi,
I was booting barebox from git on my "openmoko" gta04 today but what was not working was the mmc initialization.
It was failing in mmc_init_setup() in ./drivers/mci/omap_hsmmc.c after printing "timedout waiting for cc2!" when I had DEBUG enabled.
-%<----------------------------------------------------------------- barebox 2011.10.0-00107-gdac6e90-dirty (Oct 24 2011 - 22:12:10)
Board: Texas Instrument's Beagle
omap-hsmmc@omap-hsmmc0: timedout waiting for cc2!
Cannot reset the SD/MMC interface ->%-----------------------------------------------------------------
The gta04 should be very similar to the beagleboard and hence I was building using the omap3530_beagle_defconfig.
any hints on how to continue debugging this problem are highly appreciated!
cheers, josch
PS: sorry for my previous mail which was the result of hitting "y" instead of "e" in my mutt...
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Hi Johannes,
Quoted 17 lines · Johannes Schauer
Hi,
I was booting barebox from git on my "openmoko" gta04 today but what was not working was the mmc initialization.
It was failing in
mmc_init_setup()in./drivers/mci/omap_hsmmc.cafter printing "timedout waiting for cc2!" when I had DEBUG enabled.-%<----------------------------------------------------------------- barebox 2011.10.0-00107-gdac6e90-dirty (Oct 24 2011 - 22:12:10)
Board: Texas Instrument's Beagle
omap-hsmmc@omap-hsmmc0: timedout waiting for cc2!
Cannot reset the SD/MMC interface ->%-----------------------------------------------------------------
Quoted 5 lines
The gta04 should be very similar to the beagleboard and hence I was building using the
omap3530_beagle_defconfig.any hints on how to continue debugging this problem are highly appreciated!
You could start barebox from U-Boot (just load the barebox binary image to RAM and jump to it using the U-Boot 'go' command). Then you could comment out the lowlevel code from barebox (arch_init_lowlevel, pin_mux) and see if the problem persists. Maybe there is something different in the lowlevel code.
Another thing: Where does this string come from? We have this twice in the driver and one of them should really be "timeout waiting for reset done"
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi Sascha,
Quoted 5 lines · Sascha Hauer
You could start barebox from U-Boot (just load the barebox binary image to RAM and jump to it using the U-Boot 'go' command). Then you could comment out the lowlevel code from barebox (
arch_init_lowlevel,pin_mux) and see if the problem persists. Maybe there is something different in the lowlevel code.
This is a great idea! So first I loaded the unmodified barebox binary using:
mmc rescan 0
fatload mmc 0 0x82000000 barebox.bin
go 0x82000000
It started executing and the error was the same as before.
Then I tried doing what you suggested above and commented arch_init_lowlevel in ./arch/arm/mach-omap/omap3_core.S and I was not sure what you meant by pin_mux as the string appeared nowhere in the code but I thought you might mean the mux_config in ./arch/arm/boards/omap/board-beagle.c ? But after doing that, barebox would just not start anymore when loaded by uboot.
So can you give me some more specific advices on what to comment?
Quoted 3 lines
Another thing: Where does this string come from? We have this twice in the driver and one of them should really be "timeout waiting for reset done"
If I read the code correctly, then my error comes from line 224 of ./drivers/mci/omap_hsmmc.c :
dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");
I activated this debug message by using "#define DEBUG" on top of the file. Initially I only got the message "Cannot reset the SD/MMC interface" from line 1185 in ./drivers/mci/mci-core.c after it tried to call the init code from omap_hsmmc.c.
But where would you find "timeout waiting for reset done"? I tried to recursively grep my barebox sources without finding this string?
thanks!
cheers, josch
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 16 lines · Johannes Schauer
Hi Sascha,
Quoted 5 lines · Sascha Hauer
You could start barebox from U-Boot (just load the barebox binary image to RAM and jump to it using the U-Boot 'go' command). Then you could comment out the lowlevel code from barebox (
arch_init_lowlevel,pin_mux) and see if the problem persists. Maybe there is something different in the lowlevel code.This is a great idea! So first I loaded the unmodified barebox binary using:
mmc rescan 0
fatload mmc 00x82000000barebox.bin
go0x82000000
Quoted 7 lines
It started executing and the error was the same as before.
Then I tried doing what you suggested above and commented
arch_init_lowlevelin./arch/arm/mach-omap/omap3_core.Sand I was not sure what you meant bypin_muxas the string appeared nowhere in the code but I thought you might mean themux_configin./arch/arm/boards/omap/board-beagle.c?
Yes, that's what I meant
Quoted 2 lines
But after doing that, barebox
would just not start anymore when loaded by uboot.
Strange. Should not be the case, no idea what's happening here.
Quoted 11 lines
So can you give me some more specific advices on what to comment?
Quoted 3 lines
Another thing: Where does this string come from? We have this twice in the driver and one of them should really be "timeout waiting for reset done"
If I read the code correctly, then my error comes from line 224 of
./drivers/mci/omap_hsmmc.c:
dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");
Look again, we accidently have the same string twice in the driver:
./drivers/mci/omap_hsmmc.c:201: dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");./drivers/mci/omap_hsmmc.c:224: dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");
The one in line 224 should really be "timeout waiting for reset done".
So what I wanted to know is whether it's the error message in line 201 or 224 that we see. So please change one of them
Quoted 18 lines
I activated this debug message by using "#define DEBUG" on top of the file. Initially I only got the message "Cannot reset the SD/MMC interface" from line 1185 in
./drivers/mci/mci-core.cafter it tried to call the init code fromomap_hsmmc.c.But where would you find "timeout waiting for reset done"? I tried to recursively grep my barebox sources without finding this string?
thanks!
cheers, josch
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi,
Quoted 4 lines · Sascha Hauer
Quoted 2 lines
But after doing that, barebox would just not start anymore when loaded by uboot.
Strange. Should not be the case, no idea what's happening here.
any ideas on what I can try?
Quoted 9 lines
Look again, we accidently have the same string twice in the driver:
./drivers/mci/omap_hsmmc.c:201:dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");./drivers/mci/omap_hsmmc.c:224:dev_dbg(hsmmc->dev, "timedout waiting for cc2!\n");The one in line 224 should really be "timeout waiting for reset done".
So what I wanted to know is whether it's the error message in line 201 or 224 that we see. So please change one of them
I changed both, appending the string of the function calling them (mmc_init_stream and mmc_init_setup)
when booting I get:
barebox 2011.10.0-00107-gdac6e90-dirty (Oct 25 2011 - 12:00:54)
Board: Texas Instrument's Beagle
omap-hsmmc@omap-hsmmc0: timedout waiting for cc2! (in mmc_init_setup) Cannot reset the SD/MMC interface
So this is where it comes from.
cheers, josch
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Hi Johannes,
Quoted 3 lines · Johannes Schauer
Quoted 1 line
Strange. Should not be the case, no idea what's happening here.
any ideas on what I can try?
Does barebox now work on your gtk04? If not, I'd be willing to help with the port, but somebody would have to organze a hardware for us in that case.
rsc
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi,
Quoted 1 line · Robert Schwebel
Does barebox now work on your gtk04?
nope, I'm relying on input from you guys ;)
Quoted 2 lines
If not, I'd be willing to help with the port, but somebody would have to organze a hardware for us in that case.
if there are no leftover units in munich and you are located in germany i could lend you mine for one or two weeks?
cheers, josch
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 10 lines · Johannes Schauer
Quoted 1 line · Robert Schwebel
Does barebox now work on your gtk04?
nope, I'm relying on input from you guys ;)
Quoted 2 lines
If not, I'd be willing to help with the port, but somebody would have to organze a hardware for us in that case.
if there are no leftover units in munich and you are located in germany i could lend you mine for one or two weeks?
We are located in Germany (see signature). However, the variant with the leftover units would be preferred :-)
rsc
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox