2.6.32.47-longterm review

This is the start of the longterm review cycle for the 2.6.32.47 release. There are 107 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.

Responses should be made by Friday, November 4, 22:00:00 UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v2.6/longterm-review/patch-2.6.32.47-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

 Documentation/stable_kernel_rules.txt       |    4 +-
 Makefile                                    |    2 +-
 arch/arm/mach-davinci/board-da850-evm.c     |   28 +++
 arch/arm/plat-mxc/include/mach/iomux-v3.h   |   10 +-
 arch/mips/alchemy/mtx-1/platform.c          |    9 -
 arch/powerpc/kernel/pci_of_scan.c           |    2 +
 arch/powerpc/sysdev/mpic.c                  |   17 +--
 arch/s390/kvm/kvm-s390.c                    |   14 +-
 arch/sparc/include/asm/sigcontext.h         |   14 ++
 arch/sparc/kernel/Makefile                  |    1 +
 arch/sparc/kernel/pcic.c                    |    4 +-
 arch/sparc/kernel/signal32.c                |  184 +++++++++++--------
 arch/sparc/kernel/signal_32.c               |  172 ++++++++----------
 arch/sparc/kernel/signal_64.c               |  108 +++++------
 arch/sparc/kernel/sigutil.h                 |    9 +
 arch/sparc/kernel/sigutil_32.c              |  120 ++++++++++++
 arch/sparc/kernel/sigutil_64.c              |   93 ++++++++++
 arch/um/drivers/ubd_kern.c                  |   31 +++-
 arch/x86/include/asm/processor.h            |   23 +++
 arch/x86/kernel/amd_iommu.c                 |    2 +-
 arch/x86/kernel/kprobes.c                   |    4 +-
 arch/x86/kernel/smpboot.c                   |   85 +---------
 arch/x86/kvm/svm.c                          |    1 +
 arch/x86/kvm/vmx.c                          |    1 +
 arch/x86/xen/smp.c                          |   10 +
 arch/x86/xen/time.c                         |    4 +-
 arch/x86/xen/xen-asm_32.S                   |    8 +-
 block/blk-map.c                             |    5 +-
 block/cfq-iosched.c                         |  264 +++++++++++++++++++++------
 drivers/ata/ahci.c                          |   12 ++
 drivers/base/sys.c                          |    6 +
 drivers/block/xen-blkfront.c                |    2 +-
 drivers/char/hvc_console.c                  |    8 +-
 drivers/char/tpm/tpm.c                      |    9 +-
 drivers/gpu/drm/radeon/r100.c               |    4 +-
 drivers/hid/hid-ids.h                       |    3 +
 drivers/hid/usbhid/hid-quirks.c             |    1 +
 drivers/hwmon/w83627ehf.c                   |   15 +-
 drivers/md/linear.h                         |    2 +-
 drivers/md/md.c                             |   12 +-
 drivers/media/video/cx23885/cx23885-dvb.c   |    2 +-
 drivers/media/video/uvc/uvc_driver.c        |    2 +-
 drivers/media/video/uvc/uvc_video.c         |   10 +-
 drivers/media/video/uvc/uvcvideo.h          |    2 +-
 drivers/net/cnic.c                          |    4 +-
 drivers/net/e1000/e1000_hw.c                |    6 +
 drivers/net/e1000e/netdev.c                 |    2 +-
 drivers/net/igb/igb_main.c                  |    2 +-
 drivers/net/igbvf/netdev.c                  |    2 +-
 drivers/net/irda/smsc-ircc2.c               |    2 +-
 drivers/net/ixgbe/ixgbe_main.c              |    2 +-
 drivers/net/usb/asix.c                      |    4 +
 drivers/net/wireless/b43/main.c             |    3 +-
 drivers/net/wireless/rt2x00/rt2x00usb.c     |   14 +--
 drivers/platform/x86/thinkpad_acpi.c        |    7 +-
 drivers/s390/cio/ccwgroup.c                 |   42 +++--
 drivers/scsi/3w-9xxx.c                      |    2 +
 drivers/scsi/aacraid/commsup.c              |    2 +
 drivers/scsi/ipr.c                          |    2 +-
 drivers/scsi/libiscsi_tcp.c                 |   14 +-
 drivers/scsi/libsas/sas_expander.c          |   14 +-
 drivers/scsi/qla2xxx/qla_init.c             |    3 -
 drivers/scsi/qla2xxx/qla_isr.c              |    1 -
 drivers/staging/quatech_usb2/quatech_usb2.c |    9 +-
 drivers/usb/class/cdc-acm.c                 |    3 +
 drivers/usb/core/devio.c                    |    6 +-
 drivers/usb/core/quirks.c                   |   21 ++
 drivers/usb/host/ehci-hub.c                 |    7 +-
 drivers/usb/host/fhci-sched.c               |   19 ++-
 drivers/usb/host/xhci-mem.c                 |   22 ++-
 drivers/usb/mon/mon_bin.c                   |    2 +-
 drivers/usb/musb/musb_core.c                |    1 -
 drivers/usb/serial/ftdi_sio.c               |   24 +++-
 drivers/usb/serial/ftdi_sio_ids.h           |    7 +-
 drivers/usb/serial/pl2303.c                 |   27 +++-
 drivers/usb/serial/pl2303.h                 |    5 +
 drivers/usb/serial/qcserial.c               |    1 +
 drivers/usb/storage/transport.c             |   34 ++--
 drivers/video/carminefb.c                   |    6 +-
 drivers/watchdog/mtx-1_wdt.c                |    5 +-
 drivers/xen/events.c                        |    2 +-
 fs/cifs/cifssmb.c                           |    3 +-
 fs/eventpoll.c                              |   25 ++-
 fs/lockd/clntproc.c                         |    8 +-
 fs/nfsd/nfs4proc.c                          |    2 +-
 fs/nfsd/nfs4state.c                         |    2 +
 fs/proc/base.c                              |   69 +++++--
 fs/proc/kcore.c                             |    2 +-
 fs/splice.c                                 |    3 +-
 include/linux/interrupt.h                   |    5 +
 include/linux/iocontext.h                   |    5 -
 include/linux/jiffies.h                     |    2 +-
 include/linux/sunrpc/sched.h                |    4 +-
 include/net/scm.h                           |    5 +-
 kernel/irq/pm.c                             |   35 +++-
 kernel/kmod.c                               |    4 +-
 kernel/time.c                               |    2 +-
 lib/kobject_uevent.c                        |    2 +-
 mm/mmap.c                                   |   20 ++-
 net/9p/client.c                             |   13 +-
 net/atm/br2684.c                            |    7 +-
 net/bluetooth/l2cap.c                       |    3 +-
 net/bluetooth/rfcomm/sock.c                 |    1 +
 net/core/scm.c                              |   10 +-
 net/core/skbuff.c                           |    8 +-
 net/ipv6/ip6_output.c                       |    2 +-
 net/ipv6/ip6_tunnel.c                       |    4 +-
 net/sched/sch_api.c                         |   14 +-
 net/sunrpc/clnt.c                           |    3 +
 net/sunrpc/sched.c                          |    1 +
 net/wireless/nl80211.c                      |    9 +-
 net/wireless/reg.c                          |    1 +
 net/x25/af_x25.c                            |    3 +-
 sound/pci/hda/patch_cirrus.c                |    2 +-
 sound/pci/hda/patch_realtek.c               |    6 +-
 sound/soc/codecs/ak4535.c                   |   10 +-
 sound/soc/codecs/ak4642.c                   |   22 +-
 sound/soc/codecs/wm8940.c                   |    2 +
 sound/soc/soc-jack.c                        |    2 +-
 119 files changed, 1308 insertions(+), 661 deletions(-)

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>

commit c96fbdd0ab97235f930ebf24b38fa42a2e3458cf upstream.

Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART

They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom

So use this information to detect it

---
 drivers/usb/serial/ftdi_sio.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

@@ -105,6 +105,7 @@ static int   ftdi_jtag_probe(struct usb_
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static int   ftdi_stmclite_probe(struct usb_serial *serial);
+static int   ftdi_8u2232c_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 

@@ -132,6 +133,10 @@ static struct ftdi_sio_quirk ftdi_stmcli
 	.probe	= ftdi_stmclite_probe,
 };
 
+static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
+	.probe	= ftdi_8u2232c_probe,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:

@@ -181,7 +186,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
+		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },

@@ -1761,6 +1767,18 @@ static int ftdi_jtag_probe(struct usb_se
 
 	return 0;
 }
+
+static int ftdi_8u2232c_probe(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+
+	dbg("%s", __func__);
+
+	if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+		return ftdi_jtag_probe(serial);
+
+	return 0;
+}
 
 /*
  * First and second port on STMCLiteadaptors is reserved for JTAG interface

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Wang Zhi <[email protected]>

commit d0f2fb2500b1c5fe4967eb45d8c9bc758d7aef80 upstream.

PORT_RESUME. In Intel Oaktrail platform, MPH (Multi-Port Host Controller) core clears PORT_SUSPEND directly when SW sets PORT_RESUME bit. If we rely on PORT_SUSPEND bit to stop USB resume, we will miss the action of clearing PORT_RESUME. This will cause unexpected long resume signal on USB bus.

---
 drivers/usb/host/ehci-hub.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

@@ -243,7 +243,7 @@ static int ehci_bus_resume (struct usb_h
 	u32			temp;
 	u32			power_okay;
 	int			i;
-	u8			resume_needed = 0;
+	unsigned long		resume_needed = 0;
 
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);

@@ -307,7 +307,7 @@ static int ehci_bus_resume (struct usb_h
 		if (test_bit(i, &ehci->bus_suspended) &&
 				(temp & PORT_SUSPEND)) {
 			temp |= PORT_RESUME;
-			resume_needed = 1;
+			set_bit(i, &resume_needed);
 		}
 		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 	}

@@ -322,8 +322,7 @@ static int ehci_bus_resume (struct usb_h
 	i = HCS_N_PORTS (ehci->hcs_params);
 	while (i--) {
 		temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
-		if (test_bit(i, &ehci->bus_suspended) &&
-				(temp & PORT_SUSPEND)) {
+		if (test_bit(i, &resume_needed)) {
 			temp &= ~(PORT_RWC_BITS | PORT_RESUME);
 			ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 			ehci_vdbg (ehci, "resumed port %d\n", i + 1);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Stanislaw Gruszka <[email protected]>

commit 543cc38c8fe86deba4169977c61eb88491036837 upstream.

When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle.

BUG: unable to handle kernel paging request at 6b6b6b9f
IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30

*pdpt = 0000000034f21001 *pde = 0000000000000000
Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO
EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1
EIP is at driver_sysfs_remove+0x10/0x30
EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b
ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000)

Call Trace:
 [<c06909ef>] __device_release_driver+0x1f/0xa0
 [<c0690b20>] device_release_driver+0x20/0x40
 [<c068fd64>] bus_remove_device+0x84/0xe0
 [<c068e12a>] ? device_remove_attrs+0x2a/0x80
 [<c068e267>] device_del+0xe7/0x170
 [<c06d93d4>] usb_disconnect+0xd4/0x180
 [<c06d9d61>] hub_thread+0x691/0x1600
 [<c0473260>] ? wake_up_bit+0x30/0x30
 [<c0442a39>] ? complete+0x49/0x60
 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0
 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0
 [<c0472eb4>] kthread+0x74/0x80
 [<c0472e40>] ? kthread_worker_fn+0x150/0x150
 [<c0809b3e>] kernel_thread_helper+0x6/0x10

---
 drivers/net/wireless/rt2x00/rt2x00usb.c |   14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

@@ -703,18 +703,8 @@ int rt2x00usb_suspend(struct usb_interfa
 {
 	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	int retval;
 
-	retval = rt2x00lib_suspend(rt2x00dev, state);
-	if (retval)
-		return retval;
-
-	/*
-	 * Decrease usbdev refcount.
-	 */
-	usb_put_dev(interface_to_usbdev(usb_intf));
-
-	return 0;
+	return rt2x00lib_suspend(rt2x00dev, state);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
 

@@ -723,8 +713,6 @@ int rt2x00usb_resume(struct usb_interfac
 	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	usb_get_dev(interface_to_usbdev(usb_intf));
-
 	return rt2x00lib_resume(rt2x00dev);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_resume);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Daniel Schwierzeck <[email protected]>

commit fbe5e29ec1886967255e76946aaf537b8cc9b81e upstream.

This oops have been already fixed with commit

27141666b69f535a4d63d7bc6d9e84ee5032f82a

atm: [br2684] Fix oops due to skb->dev being NULL

It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push().

but have been introduced again with commit

b6211ae7f2e56837c6a4849316396d1535606e90

atm: Use SKB queue and list helpers instead of doing it by-hand.

---
 net/atm/br2684.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

@@ -530,12 +530,13 @@ static int br2684_regvcc(struct atm_vcc
 	spin_unlock_irqrestore(&rq->lock, flags);
 
 	skb_queue_walk_safe(&queue, skb, tmp) {
-		struct net_device *dev = skb->dev;
+		struct net_device *dev;
+
+		br2684_push(atmvcc, skb);
+		dev = skb->dev;
 
 		dev->stats.rx_bytes -= skb->len;
 		dev->stats.rx_packets--;
-
-		br2684_push(atmvcc, skb);
 	}
 	__module_get(THIS_MODULE);
 	return 0;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: "David S. Miller" <[email protected]>

commit 5598473a5b40c47a8c5349dd2c2630797169cf1a upstream.

If we can't push the pending register windows onto the user's stack, we disallow signal delivery even if the signal would be delivered on a valid seperate signal stack.

Add a register window save area in the signal frame, and store any unsavable windows there.

On sigreturn, if any windows are still queued up in the signal frame, try to push them back onto the stack and if that fails we kill the process immediately.

This allows the debug/tst-longjmp_chk2 glibc test case to pass.

---
 arch/sparc/include/asm/sigcontext.h |   14 ++
 arch/sparc/kernel/Makefile          |    1 
 arch/sparc/kernel/signal32.c        |  184 ++++++++++++++++++++----------------
 arch/sparc/kernel/signal_32.c       |  172 +++++++++++++++------------------
 arch/sparc/kernel/signal_64.c       |  108 +++++++++------------
 arch/sparc/kernel/sigutil.h         |    9 +
 arch/sparc/kernel/sigutil_32.c      |  120 +++++++++++++++++++++++
 arch/sparc/kernel/sigutil_64.c      |   93 ++++++++++++++++++
 8 files changed, 468 insertions(+), 233 deletions(-)

@@ -45,6 +45,19 @@ typedef struct {
 	int			si_mask;
 } __siginfo32_t;
 
+#define __SIGC_MAXWIN	7
+
+typedef struct {
+	unsigned long locals[8];
+	unsigned long ins[8];
+} __siginfo_reg_window;
+
+typedef struct {
+	int			wsaved;
+	__siginfo_reg_window	reg_window[__SIGC_MAXWIN];
+	unsigned long		rwbuf_stkptrs[__SIGC_MAXWIN];
+} __siginfo_rwin_t;
+
 #ifdef CONFIG_SPARC64
 typedef struct {
 	unsigned   int si_float_regs [64];

@@ -73,6 +86,7 @@ struct sigcontext {
 		unsigned long	ss_size;
 	}			sigc_stack;
 	unsigned long		sigc_mask;
+	__siginfo_rwin_t *	sigc_rwin_save;
 };
 
 #else

@@ -24,6 +24,7 @@ obj-$(CONFIG_SPARC32)   += sun4m_irq.o s
 
 obj-y                   += process_$(BITS).o
 obj-y                   += signal_$(BITS).o
+obj-y                   += sigutil_$(BITS).o
 obj-$(CONFIG_SPARC32)   += ioport.o
 obj-y                   += setup_$(BITS).o
 obj-y                   += idprom.o

@@ -0,0 +1,9 @@
+#ifndef _SIGUTIL_H
+#define _SIGUTIL_H
+
+int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu);
+int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu);
+int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin);
+int restore_rwin_state(__siginfo_rwin_t __user *rp);
+
+#endif /* _SIGUTIL_H */

[...]

But is there a real application that needs this?

Ben.

Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.

From: Ben Hutchings <[email protected]>
Date: Fri, 04 Nov 2011 04:33:28 +0000

You get zero debugging information when this happens so without this change analysis of a crash is virtually impossible.

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Ian Campbell <[email protected]>

commit 4a0342ca8e8150bd47e7118a76e300692a1b6b7b upstream.

CC arch/sparc/kernel/pcic.o
arch/sparc/kernel/pcic.c: In function 'pcic_probe':
arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds]
cc1: all warnings being treated as errors

I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized.

---
 arch/sparc/kernel/pcic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -350,8 +350,8 @@ int __init pcic_probe(void)
 	strcpy(pbm->prom_name, namebuf);
 
 	{
-		extern volatile int t_nmi[1];
-		extern int pcic_nmi_trap_patch[1];
+		extern volatile int t_nmi[4];
+		extern int pcic_nmi_trap_patch[4];
 
 		t_nmi[0] = pcic_nmi_trap_patch[0];
 		t_nmi[1] = pcic_nmi_trap_patch[1];

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Stratos Psomadakis <[email protected]>

Fix broken backport for IPv6 tunnels in 2.6.32-longterm kernels.

upstream commit d5aa407f59f5b83d2c50ec88f5bf56d40f1f8978 ("tunnels: fix netns vs proto registration ordering") , which was included in 2.6.32.44-longterm, was not backported correctly, and results in a NULL pointer dereference in ip6_tunnel.c for longterm kernels >=2.6.32.44

Use [un]register_pernet_gen_device() instead of
[un]register_pernet_device() to fix it.

---
 net/ipv6/ip6_tunnel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1466,7 +1466,7 @@ static int __init ip6_tunnel_init(void)
 {
 	int  err;
 
-	err = register_pernet_device(&ip6_tnl_net_ops);
+	err = register_pernet_gen_device(&ip6_tnl_net_id, &ip6_tnl_net_ops);
 	if (err < 0)
 		goto out_pernet;
 

@@ -1487,7 +1487,7 @@ static int __init ip6_tunnel_init(void)
 out_ip6ip6:
 	xfrm6_tunnel_deregister(&ip4ip6_handler, AF_INET);
 out_ip4ip6:
-	unregister_pernet_device(&ip6_tnl_net_ops);
+	unregister_pernet_gen_device(ip6_tnl_net_id, &ip6_tnl_net_ops);
 out_pernet:
 	return err;
 }

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Sridhar Samudrala <[email protected]>

commit 8e1e8a4779cb23c1d9f51e9223795e07ec54d77a upstream.

Found this problem when testing IPv6 from a KVM guest to a remote host via e1000e device on the host.
The following patch fixes the check for IPv6 GSO packet in Intel ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest.

---
 drivers/net/e1000e/netdev.c    |    2 +-
 drivers/net/igb/igb_main.c     |    2 +-
 drivers/net/igbvf/netdev.c     |    2 +-
 drivers/net/ixgbe/ixgbe_main.c |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

@@ -3807,7 +3807,7 @@ static int e1000_tso(struct e1000_adapte
 								 0);
 			cmd_length = E1000_TXD_CMD_IP;
 			ipcse = skb_transport_offset(skb) - 1;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		} else if (skb_is_gso_v6(skb)) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,

@@ -3032,7 +3032,7 @@ static inline int igb_tso_adv(struct igb
 							 iph->daddr, 0,
 							 IPPROTO_TCP,
 							 0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 						       &ipv6_hdr(skb)->daddr,

@@ -1953,7 +1953,7 @@ static int igbvf_tso(struct igbvf_adapte
 		                                         iph->daddr, 0,
 		                                         IPPROTO_TCP,
 		                                         0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 		                                       &ipv6_hdr(skb)->daddr,

@@ -4881,7 +4881,7 @@ static int ixgbe_tso(struct ixgbe_adapte
 			                                         IPPROTO_TCP,
 			                                         0);
 			adapter->hw_tso_ctxt++;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		} else if (skb_is_gso_v6(skb)) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Herbert Xu <[email protected]>

commit 0aa68271510ae2b221d4b60892103837be63afe4 upstream.

Currently we disallow GSO packets on the IPv6 forward path. This patch fixes this.

Note that I discovered that our existing GSO MTU checks (e.g., IPv4 forwarding) are buggy in that they skip the check altogether, when they really should be checking gso_size + header instead.

I have also been lazy here in that I haven't bothered to segment the GSO packet by hand before generating an ICMP message. Someone should add that to be 100% correct.

---
 net/ipv6/ip6_output.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -510,7 +510,7 @@ int ip6_forward(struct sk_buff *skb)
 		}
 	}
 
-	if (skb->len > dst_mtu(dst)) {
+	if (skb->len > dst_mtu(dst) && !skb_is_gso(skb)) {
 		/* Again, force OUTPUT device used as source address */
 		skb->dev = dst->dev;
 		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, dst_mtu(dst), skb->dev);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Greg Kroah-Hartman <[email protected]>

This reverts commit 226917b0735f31cf5c704e07fdd590d99bbfae58 (upstream ea53069231f9317062910d6e772cca4ce93de8c8 and a68e5c94f7d3dd64fef34dd5d97e365cae4bb42a and ce5f68246bf2385d6174856708d0b746dc378f20 all mushed together) as Jonathan Nieder reports that this causes a regression on some hardware.

More details can be found at http://bugs.debian.org/622259

---
 arch/x86/include/asm/processor.h |   23 ++++++++++
 arch/x86/kernel/smpboot.c        |   85 +-------------------------------------
 2 files changed, 24 insertions(+), 84 deletions(-)

index da35a70..fa04dea 100644
@@ -765,6 +765,29 @@ extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
 
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt.  Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions.  wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+	mb();
+	/* check for clflush to determine if wbinvd is legal */
+	if (cpu_has_clflush)
+		asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+	else
+		while (1)
+			halt();
+}
+
 extern void enable_sep_cpu(void);
 extern int sysenter_setup(void);
 

1.7.6.1

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Michal Schmidt <[email protected]>

commit d1dc7abf2fafa34b0ffcd070fd59405aa9c0a4d8 upstream.

Suppose that several linear skbs of the same flow were received by GRO. They were thus merged into one skb with a frag_list. Then a new skb of the same flow arrives, but it is a paged skb with data starting in its frags[].

Before adding the skb to the frag_list skb_gro_receive() will of course adjust the skb to throw away the headers. It correctly modifies the page_offset and size of the frag, but it leaves incorrect information in the skb:
->data_len is not decreased at all.
->len is decreased only by headlen, as if no change were done to the frag.
Later in a receiving process this causes skb_copy_datagram_iovec() to return -EFAULT and this is seen in userspace as the result of the recv() syscall.

In practice the bug can be reproduced with the sfc driver. By default the driver uses an adaptive scheme when it switches between using napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is reproduced when under rx load with enough successful GRO merging the driver decides to switch from the former to the latter.

Manual control is also possible, so reproducing this is easy with netcat:
- on machine1 (with sfc): nc -l 12345 > /dev/null
- on machine2: nc machine1 12345 < /dev/zero
- on machine1:
echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages
- See that nc has quit suddenly.

[v2: Modified by Eric Dumazet to avoid advancing skb->data past the end
and to use a temporary variable.]

---
 net/core/skbuff.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -2746,8 +2746,12 @@ int skb_gro_receive(struct sk_buff **hea
 
 merge:
 	if (offset > headlen) {
-		skbinfo->frags[0].page_offset += offset - headlen;
-		skbinfo->frags[0].size -= offset - headlen;
+		unsigned int eat = offset - headlen;
+
+		skbinfo->frags[0].page_offset += eat;
+		skbinfo->frags[0].size -= eat;
+		skb->data_len -= eat;
+		skb->len -= eat;
 		offset = headlen;
 	}
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Marek Marczykowski <[email protected]>

commit 4352b47ab7918108b389a48d2163c9a4c2aaf139 upstream.

barrier variable is int, not long. This overflow caused another variable
override: "err" (in PV code) and "binfo" (in xenlinux code - drivers/xen/blkfront/blkfront.c). The later caused incorrect device flags (RO/removable etc).

---
 drivers/block/xen-blkfront.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -889,7 +889,7 @@ static void blkfront_connect(struct blkf
 	}
 
 	err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
-			    "feature-barrier", "%lu", &info->feature_barrier,
+			    "feature-barrier", "%d", &info->feature_barrier,
 			    NULL);
 	if (err)
 		info->feature_barrier = 0;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: NeilBrown <[email protected]>

commit 1b6afa17581027218088a18a9ceda600e0ddba7a upstream.

I don't know what I was thinking putting 'rcu' after a dynamically sized array! The array could still be in use when we call rcu_free() (That is the point) so we mustn't corrupt it.

---
 drivers/md/linear.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -10,9 +10,9 @@ typedef struct dev_info dev_info_t;
 
 struct linear_private_data
 {
+	struct rcu_head		rcu;
 	sector_t		array_sectors;
 	dev_info_t		disks[0];
-	struct rcu_head		rcu;
 };
 
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Yang Li <[email protected]>

commit 38e1313fc753482b93aa6c6f11cfbd43a5bcd963 upstream.

Since commit 57b150cce8e004ddd36330490a68bfb59b7271e9, desc->affinity of an irq is changed after calling desc->chip->set_affinity. Therefore we need to fix the irq_choose_cpu() not to depend on the desc->affinity for new mask.

---
 arch/powerpc/sysdev/mpic.c |   17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

@@ -567,12 +567,10 @@ static void __init mpic_scan_ht_pics(str
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(const cpumask_t *mask)
 {
-	cpumask_t mask;
 	int cpuid;
 
-	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
 	if (cpus_equal(mask, CPU_MASK_ALL)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);

@@ -594,20 +592,15 @@ static int irq_choose_cpu(unsigned int v
 
 		spin_unlock_irqrestore(&irq_rover_lock, flags);
 	} else {
-		cpumask_t tmp;
-
-		cpus_and(tmp, cpu_online_map, mask);
-
-		if (cpus_empty(tmp))
+		cpuid = cpumask_first_and(mask, cpu_online_mask);
+		if (cpuid >= nr_cpu_ids)
 			goto do_round_robin;
-
-		cpuid = first_cpu(tmp);
 	}
 
 	return get_hard_smp_processor_id(cpuid);
 }
 #else
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(const cpumask_t *mask)
 {
 	return hard_smp_processor_id();
 }

@@ -816,7 +809,7 @@ int mpic_set_affinity(unsigned int irq,
 	unsigned int src = mpic_irq_to_hw(irq);
 
 	if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
-		int cpuid = irq_choose_cpu(irq);
+		int cpuid = irq_choose_cpu(cpumask);
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
 	} else {

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Sonny Rao <[email protected]>

commit 5b339bdf164d8aee394609768f7e2e4415b0252a upstream.

We ran into an issue where it looks like we're not properly ignoring a pci device with a non-good status property when we walk the device tree and instanciate the Linux side PCI devices.

However, the EEH init code does look for the property and disables EEH on these devices. This leaves us in an inconsistent where we are poking at a supposedly bad piece of hardware and RTAS will block our config cycles because EEH isn't enabled anyway.

---
 arch/powerpc/kernel/pci_of_scan.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -300,6 +300,8 @@ static void __devinit __of_scan_bus(stru
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
 		pr_debug("  * %s\n", child->full_name);
+		if (!of_device_is_available(child))
+			continue;
 		reg = of_get_property(child, "reg", &reglen);
 		if (reg == NULL || reglen < 20)
 			continue;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Igor Mammedov <[email protected]>

commit d198d499148a0c64a41b3aba9e7dd43772832b91 upstream.

If vmalloc page_fault happens inside of interrupt handler with interrupts disabled then on exit path from exception handler when there is no pending interrupts, the following code (arch/x86/xen/xen-asm_32.S:112):

	cmpw $0x0001, XEN_vcpu_info_pending(%eax)
	sete XEN_vcpu_info_mask(%eax)

will enable interrupts even if they has been previously disabled according to eflags from the bounce frame (arch/x86/xen/xen-asm_32.S:99)

	testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
	setz XEN_vcpu_info_mask(%eax)

Solution is in setting XEN_vcpu_info_mask only when it should be set according to

	cmpw $0x0001, XEN_vcpu_info_pending(%eax)

but not clearing it if there isn't any pending events.

Reproducer for bug is attached to RHBZ 707552

---
 arch/x86/xen/xen-asm_32.S |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

@@ -113,11 +113,13 @@ xen_iret_start_crit:
 
 	/*
 	 * If there's something pending, mask events again so we can
-	 * jump back into xen_hypervisor_callback
+	 * jump back into xen_hypervisor_callback. Otherwise do not
+	 * touch XEN_vcpu_info_mask.
 	 */
-	sete XEN_vcpu_info_mask(%eax)
+	jne 1f
+	movb $1, XEN_vcpu_info_mask(%eax)
 
-	popl %eax
+1:	popl %eax
 
 	/*
 	 * From this point on the registers are restored and the stack

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Konrad Rzeszutek Wilk <[email protected]>

commit ed467e69f16e6b480e2face7bc5963834d025f91 upstream.

We have hit a couple of customer bugs where they would like to use those parameters to run an UP kernel - but both of those options turn of important sources of interrupt information so we end up not being able to boot. The correct way is to pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and the kernel will patch itself to be a UP kernel.

Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308

---
 arch/x86/xen/smp.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -30,6 +30,7 @@
 #include <xen/page.h>
 #include <xen/events.h>
 
+#include <xen/hvc-console.h>
 #include "xen-ops.h"
 #include "mmu.h"
 

@@ -179,6 +180,15 @@ static void __init xen_smp_prepare_cpus(
 {
 	unsigned cpu;
 
+	if (skip_ioapic_setup) {
+		char *m = (max_cpus == 0) ?
+			"The nosmp parameter is incompatible with Xen; " \
+			"use Xen dom0_max_vcpus=1 parameter" :
+			"The noapic parameter is incompatible with Xen";
+
+		xen_raw_printk(m);
+		panic(m);
+	}
 	xen_init_lock_cpu(0);
 
 	smp_store_cpu_info(0);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Sudhakar Rajashekhara <[email protected]>

commit 810198bc9c109489dfadc57131c5183ce6ad2d7d upstream.

DA850/OMAP-L138 EMAC driver uses random mac address instead of a fixed one because the mac address is not stuffed into EMAC platform data.

This patch provides a function which reads the mac address stored in SPI flash (registered as MTD device) and populates the EMAC platform data. The function which reads the mac address is registered as a callback which gets called upon addition of MTD device.

NOTE: In case the MAC address stored in SPI flash is erased, follow the instructions at [1] to restore it.

[1] http://processors.wiki.ti.com/index.php/GSG:_OMAP-L138_DVEVM_Additional_Procedures#Restoring_MAC_address_on_SPI_Flash

Modifications in v2:
Guarded registering the mtd_notifier only when MTD is enabled. Earlier this was handled using mtd_has_partitions() call, but this has been removed in Linux v3.0.

Modifications in v3:
a. Guarded da850_evm_m25p80_notify_add() function and
da850evm_spi_notifier structure with CONFIG_MTD macros.
b. Renamed da850_evm_register_mtd_user() function to
da850_evm_setup_mac_addr() and removed the struct mtd_notifier argument to this function.
c. Passed the da850evm_spi_notifier structure to register_mtd_user()
function.

Modifications in v4:
Moved the da850_evm_setup_mac_addr() function within the first CONFIG_MTD ifdef construct.

---
 arch/arm/mach-davinci/board-da850-evm.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

@@ -42,6 +42,32 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#ifdef CONFIG_MTD
+static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
+{
+	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+	size_t retlen;
+
+	if (!strcmp(mtd->name, "MAC-Address")) {
+		mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
+		if (retlen == ETH_ALEN)
+			pr_info("Read MAC addr from SPI Flash: %pM\n",
+				mac_addr);
+	}
+}
+
+static struct mtd_notifier da850evm_spi_notifier = {
+	.add	= da850_evm_m25p80_notify_add,
+};
+
+static void da850_evm_setup_mac_addr(void)
+{
+	register_mtd_user(&da850evm_spi_notifier);
+}
+#else
+static void da850_evm_setup_mac_addr(void) { }
+#endif
+
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "NOR filesystem",

@@ -381,6 +407,8 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 				ret);
+
+	da850_evm_setup_mac_addr();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: NeilBrown <[email protected]>

commit 27a7b260f71439c40546b43588448faac01adb93 upstream.

0.90 metadata uses an unsigned 32bit number to count the number of kilobytes used from each device.
This should allow up to 4TB per device.
However we multiply this by 2 (to get sectors) before casting to a larger type, so sizes above 2TB get truncated.

Also we allow rdev->sectors to be larger than 4TB, so it is possible for the array to be resized larger than the metadata can handle. So make sure rdev->sectors never exceeds 4TB when 0.90 metadata is in used.

Also the sanity check at the end of super_90_load should include level 1 as it used ->size too. (RAID0 and Linear don't use ->size at all).

---
 drivers/md/md.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

@@ -848,8 +848,11 @@ static int super_90_load(mdk_rdev_t *rde
 			ret = 0;
 	}
 	rdev->sectors = rdev->sb_start;
+	/* Limit to 4TB as metadata cannot record more than that */
+	if (rdev->sectors >= (2ULL << 32))
+		rdev->sectors = (2ULL << 32) - 2;
 
-	if (rdev->sectors < sb->size * 2 && sb->level > 1)
+	if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1)
 		/* "this cannot possibly happen" ... */
 		ret = -EINVAL;
 

@@ -884,7 +887,7 @@ static int super_90_validate(mddev_t *md
 		mddev->clevel[0] = 0;
 		mddev->layout = sb->layout;
 		mddev->raid_disks = sb->raid_disks;
-		mddev->dev_sectors = sb->size * 2;
+		mddev->dev_sectors = ((sector_t)sb->size) * 2;
 		mddev->events = ev1;
 		mddev->bitmap_offset = 0;
 		mddev->default_bitmap_offset = MD_SB_BYTES >> 9;

@@ -1122,6 +1125,11 @@ super_90_rdev_size_change(mdk_rdev_t *rd
 	rdev->sb_start = calc_dev_sboffset(rdev->bdev);
 	if (!num_sectors || num_sectors > rdev->sb_start)
 		num_sectors = rdev->sb_start;
+	/* Limit to 4TB as metadata cannot record more than that.
+	 * 4TB == 2^32 KB, or 2*2^32 sectors.
+	 */
+	if (num_sectors >= (2ULL << 32))
+		num_sectors = (2ULL << 32) - 2;
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Eric Van Hensbergen <[email protected]>

commit b85f7d92d7bd7e3298159e8b1eed8cb8cbbb0348 upstream.

There was a BUG_ON to protect against a bad id which could be dealt with more gracefully.

---
 net/9p/client.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -221,7 +221,8 @@ struct p9_req_t *p9_tag_lookup(struct p9
 	 * buffer to read the data into */
 	tag++;
 
-	BUG_ON(tag >= c->max_tag);
+	if(tag >= c->max_tag)
+		return NULL;
 
 	row = tag / P9_ROW_MAXTAG;
 	col = tag % P9_ROW_MAXTAG;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: "Aneesh Kumar K.V" <[email protected]>

commit 5034990e28efb2d232ee82443a9edd62defd17ba upstream.

free the fid even in case of failed clunk.

---
 net/9p/client.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -1022,9 +1022,11 @@ int p9_client_clunk(struct p9_fid *fid)
 	P9_DPRINTK(P9_DEBUG_9P, "<<< RCLUNK fid %d\n", fid->fid);
 
 	p9_free_req(clnt, req);
-	p9_fid_destroy(fid);
-
 error:
+	/*
+	 * Fid is not valid even after a failed clunk
+	 */
+	p9_fid_destroy(fid);
 	return err;
 }
 EXPORT_SYMBOL(p9_client_clunk);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: "Venkateswararao Jujjuri (JV)" <[email protected]>

commit c9ffb05ca5b5098d6ea468c909dd384d90da7d54 upstream.

msize represents the maximum PDU size that includes P9_IOHDRSZ.

---
 net/9p/client.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -698,8 +698,8 @@ struct p9_client *p9_client_create(const
 	if (err)
 		goto error;
 
-	if ((clnt->msize+P9_IOHDRSZ) > clnt->trans_mod->maxsize)
-		clnt->msize = clnt->trans_mod->maxsize-P9_IOHDRSZ;
+	if (clnt->msize > clnt->trans_mod->maxsize)
+		clnt->msize = clnt->trans_mod->maxsize;
 
 	err = p9_client_version(clnt);
 	if (err)

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Randy Dunlap <[email protected]>

commit f470e5ae34d68880a38aa79ee5c102ebc2a1aef6 upstream.

Fix section mismatch warning:

WARNING: drivers/net/irda/smsc-ircc2.o(.devinit.text+0x1a7): Section mismatch in reference from the function smsc_ircc_pnp_probe() to the function .init.text:smsc_ircc_open()

---
 drivers/net/irda/smsc-ircc2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -515,7 +515,7 @@ static const struct net_device_ops smsc_
  *    Try to open driver instance
  *
  */
-static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
+static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
 {
 	struct smsc_ircc_cb *self;
 	struct net_device *dev;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Andrew Vasquez <[email protected]>

commit 58b48576966ed0afd3f63ef17480ec12748a7119 upstream.

Transitioning to a LOOP_UPDATE loop-state could cause the driver to miss normal link/target processing. LOOP_UPDATE is a crufty artifact leftover from at time the driver performed it's own internal command-queuing. Safely remove this state.

---
 drivers/scsi/qla2xxx/qla_init.c |    3 ---
 drivers/scsi/qla2xxx/qla_isr.c  |    1 -
 2 files changed, 4 deletions(-)

@@ -3459,15 +3459,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha
 		req = vha->req;
 	rsp = req->rsp;
 
-	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
 	if (vha->flags.online) {
 		if (!(rval = qla2x00_fw_ready(vha))) {
 			/* Wait at most MAX_TARGET RSCNs for a stable link. */
 			wait_time = 256;
 			do {
-				atomic_set(&vha->loop_state, LOOP_UPDATE);
-
 				/* Issue a marker after FW becomes ready. */
 				qla2x00_marker(vha, req, rsp, 0, 0,
 					MK_SYNC_ALL);

@@ -717,7 +717,6 @@ skip_rio:
 			vha->flags.rscn_queue_overflow = 1;
 		}
 
-		atomic_set(&vha->loop_state, LOOP_UPDATE);
 		atomic_set(&vha->loop_down_timer, 0);
 		vha->flags.management_server_logged_in = 0;
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jeff Kirsher <[email protected]>

commit e2faeec2de9e2c73958e6ea6065dde1e8cd6f3a2 upstream.

The checksum field in the EEPROM on HPPA is really not a checksum but a signature (0x16d6). So allow 0x16d6 as the matching checksum on HPPA systems.

This issue is present on longterm/stable kernels, I have verified that this patch is applicable back to at least 2.6.32.y kernels.

v2- changed ifdef to use CONFIG_PARISC instead of __hppa__

---
 drivers/net/e1000/e1000_hw.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -3842,6 +3842,12 @@ s32 e1000_validate_eeprom_checksum(struc
 		checksum += eeprom_data;
 	}
 
+#ifdef CONFIG_PARISC
+	/* This is a signature and not a checksum on HP c8000 */
+	if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6))
+		return E1000_SUCCESS;
+
+#endif
 	if (checksum == (u16) EEPROM_SUM)
 		return E1000_SUCCESS;
 	else {

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Mark Brown <[email protected]>

commit 747da0f80e566500421bd7760b2e050fea3fde5e upstream.

We need to report the entire jack state to the core jack code, not just the bits that were being updated by the caller, otherwise the status reported by other detection methods will be omitted from the state seen by userspace.

---
 sound/soc/soc-jack.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -94,7 +94,7 @@ void snd_soc_jack_report(struct snd_soc_
 
 	snd_soc_dapm_sync(codec);
 
-	snd_jack_report(jack->jack, status);
+	snd_jack_report(jack->jack, jack->status);
 
 out:
 	mutex_unlock(&codec->mutex);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: David Henningsson <[email protected]>

commit 2e1210bc3d065a6e26ff5fef228a9a7e08921d2c upstream.

This patch fixes "Surround Speaker Playback Volume" being cut off. (Commit b4dabfc452a10 was probably meant to fix this, but it fixed only the "Switch" name, not the "Volume" name.)

---
 sound/pci/hda/patch_cirrus.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -509,7 +509,7 @@ static int add_volume(struct hda_codec *
 		      int index, unsigned int pval, int dir,
 		      struct snd_kcontrol **kctlp)
 {
-	char tmp[32];
+	char tmp[44];
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
 	knew.private_value = pval;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Alex Deucher <[email protected]>

commit 18b4fada275dd2b6dd9db904ddf70fe39e272222 upstream.

cur_pages is the number of pages per loop iteration.

---
 drivers/gpu/drm/radeon/r100.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -355,8 +355,8 @@ int r100_copy_blit(struct radeon_device
 		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
 		radeon_ring_write(rdev, 0);
 		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
-		radeon_ring_write(rdev, num_pages);
-		radeon_ring_write(rdev, num_pages);
+		radeon_ring_write(rdev, cur_pages);
+		radeon_ring_write(rdev, cur_pages);
 		radeon_ring_write(rdev, cur_pages | (stride_pixels << 16));
 	}
 	radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0));

Please don't apply. This ended up getting reverted upstream.

Ah, thanks, I forgot to remove it here when I also removed it from the 3.0 tree.

greg k-h

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jeff Layton <[email protected]>

commit 9438fabb73eb48055b58b89fc51e0bc4db22fabd upstream.

The name_len variable in CIFSFindNext is a signed int that gets set to the resume_name_len in the cifs_search_info. The resume_name_len however is unsigned and for some infolevels is populated directly from a 32 bit value sent by the server.

If the server sends a very large value for this, then that value could look negative when converted to a signed int. That would make that value pass the PATH_MAX check later in CIFSFindNext. The name_len would then be used as a length value for a memcpy. It would then be treated as unsigned again, and the memcpy scribbles over a ton of memory.

Fix this by making the name_len an unsigned value in CIFSFindNext.

---
 fs/cifs/cifssmb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -3596,7 +3596,8 @@ int CIFSFindNext(const int xid, struct c
 	T2_FNEXT_RSP_PARMS *parms;
 	char *response_data;
 	int rc = 0;
-	int bytes_returned, name_len;
+	int bytes_returned;
+	unsigned int name_len;
 	__u16 params, byte_count;
 
 	cFYI(1, ("In FindNext"));

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Manual Munz <[email protected]>

commit 8c23516fbb209ccf8f8c36268311c721faff29ee upstream.

In ad-hoc mode, driver b43 does not issue beacons.

---
 drivers/net/wireless/b43/main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1526,7 +1526,8 @@ static void handle_irq_beacon(struct b43
 	u32 cmd, beacon0_valid, beacon1_valid;
 
 	if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
-	    !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
+	    !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
+	    !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
 		return;
 
 	/* This is the bottom half of the asynchronous beacon update. */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Rajkumar Manoharan <[email protected]>

commit aa3d7eef398dd4f29045e9889b817d5161afe03e upstream.

During the association, the regulatory is updated by country IE that reaps the previously found beacons. The impact is that after a STA disconnects *or* when for any reason a regulatory domain change happens the beacon hint flag is not cleared therefore preventing future beacon hints to be learned. This is important as a regulatory domain change or a restore of regulatory settings would set back the passive scan and no-ibss flags on the channel. This is the right place to do this given that it covers any regulatory domain change.

---
 net/wireless/reg.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1023,6 +1023,7 @@ static void handle_channel(struct wiphy
 		return;
 	}
 
+	chan->beacon_found = false;
 	chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
 	chan->max_antenna_gain = min(chan->orig_mag,
 		(int) MBI_TO_DBI(power_rule->max_antenna_gain));

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Michal Sroczynski <[email protected]>

commit 8d48fdf689fed2c73c493e5146d1463689246442 upstream.

PL2303: correctly handle baudrates above 115200

---
 drivers/usb/serial/pl2303.c |   26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

@@ -617,10 +617,28 @@ static void pl2303_set_termios(struct tt
 				baud = 6000000;
 		}
 		dbg("%s - baud set = %d", __func__, baud);
-		buf[0] = baud & 0xff;
-		buf[1] = (baud >> 8) & 0xff;
-		buf[2] = (baud >> 16) & 0xff;
-		buf[3] = (baud >> 24) & 0xff;
+		if (baud <= 115200) {
+			buf[0] = baud & 0xff;
+			buf[1] = (baud >> 8) & 0xff;
+			buf[2] = (baud >> 16) & 0xff;
+			buf[3] = (baud >> 24) & 0xff;
+		} else {
+			/* apparently the formula for higher speeds is:
+			 * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
+			 */
+			unsigned tmp = 12*1000*1000*32 / baud;
+			buf[3] = 0x80;
+			buf[2] = 0;
+			buf[1] = (tmp >= 256);
+			while (tmp >= 256) {
+				tmp >>= 2;
+				buf[1] <<= 1;
+			}
+			if (tmp > 256) {
+				tmp %= 256;
+			}
+			buf[0] = tmp;
+		}
 	}
 
 	/* For reference buf[4]=0 is 1 stop bits */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Marek Vasut <[email protected]>

commit 308859097831831a979f2e82cbeef0a94f438080 upstream.

This device can be found in Acer Iconia TAB W500 tablet dock.

---
 drivers/net/usb/asix.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -1467,6 +1467,10 @@ static const struct usb_device_id	produc
 	USB_DEVICE (0x04f1, 0x3008),
 	.driver_info = (unsigned long) &ax8817x_info,
 }, {
+	// ASIX AX88772B 10/100
+	USB_DEVICE (0x0b95, 0x772b),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
 	// ASIX AX88772 10/100
 	USB_DEVICE (0x0b95, 0x7720),
 	.driver_info = (unsigned long) &ax88772_info,

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Hendrik Brueckner <[email protected]>

commit 8c2381af0d3ef62a681dac5a141b6dabb27bf2e1 upstream.

Currently, the hvc_console_print() function drops console output if the hvc backend's put_chars() returns 0. This patch changes this behavior to allow a retry through returning -EAGAIN.

This change also affects the hvc_push() function. Both functions are changed to handle -EAGAIN and to retry the put_chars() operation.

If a hvc backend returns -EAGAIN, the retry handling differs:

- hvc_console_print() spins to write the complete console output.
- hvc_push() behaves the same way as for returning 0.

Now hvc backends can indirectly control the way how console output is handled through the hvc console layer.

---
 drivers/char/hvc_console.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

@@ -162,8 +162,10 @@ static void hvc_console_print(struct con
 		} else {
 			r = cons_ops[index]->put_chars(vtermnos[index], c, i);
 			if (r <= 0) {
-				/* throw away chars on error */
-				i = 0;
+				/* throw away characters on error
+				 * but spin in case of -EAGAIN */
+				if (r != -EAGAIN)
+					i = 0;
 			} else if (r > 0) {
 				i -= r;
 				if (i > 0)

@@ -447,7 +449,7 @@ static int hvc_push(struct hvc_struct *h
 
 	n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf);
 	if (n <= 0) {
-		if (n == 0) {
+		if (n == 0 || n == -EAGAIN) {
 			hp->do_wakeup = 1;
 			return 0;
 		}

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Peter Huewe <[email protected]>

commit 6b07d30aca7e52f2881b8c8c20c8a2cd28e8b3d3 upstream.

This patch changes the call of tpm_transmit by supplying the size of the userspace buffer instead of TPM_BUFSIZE.

This got assigned CVE-2011-1161.

[The first hunk didn't make sense given one could expect
way less data than TPM_BUFSIZE, so added tpm_transmit boundary check over bufsiz instead
The last parameter of tpm_transmit() reflects the amount of data expected from the device, and not the buffer size being supplied to it. It isn't ideal to parse it directly, so we just set it to the maximum the input buffer can handle and let the userspace API to do such job.]

---
 drivers/char/tpm/tpm.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -374,6 +374,9 @@ static ssize_t tpm_transmit(struct tpm_c
 	u32 count, ordinal;
 	unsigned long stop;
 
+	if (bufsiz > TPM_BUFSIZE)
+		bufsiz = TPM_BUFSIZE;
+
 	count = be32_to_cpu(*((__be32 *) (buf + 2)));
 	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 	if (count == 0)

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Peter Huewe <[email protected]>

commit 3321c07ae5068568cd61ac9f4ba749006a7185c9 upstream.

Since the buffer might contain security related data it might be a good idea to zero the buffer after we have copied it to userspace.

This got assigned CVE-2011-1162.

---
 drivers/char/tpm/tpm.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

@@ -1044,6 +1044,7 @@ ssize_t tpm_read(struct file *file, char
 {
 	struct tpm_chip *chip = file->private_data;
 	ssize_t ret_size;
+	int rc;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
 	flush_scheduled_work();

@@ -1054,8 +1055,11 @@ ssize_t tpm_read(struct file *file, char
 			ret_size = size;
 
 		mutex_lock(&chip->buffer_mutex);
-		if (copy_to_user(buf, chip->data_buffer, ret_size))
+		rc = copy_to_user(buf, chip->data_buffer, ret_size);
+		memset(chip->data_buffer, 0, ret_size);
+		if (rc)
 			ret_size = -EFAULT;
+
 		mutex_unlock(&chip->buffer_mutex);
 	}
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Mike Christie <[email protected]>

commit 74dcd0ec735ba9c5bef254b2f6e53068cf3f9ff0 upstream.

Have libiscsi_tcp have upper layers allocate the LLD data along with the iscsi_cls_conn struct, so it is refcounted.

---
 drivers/scsi/libiscsi_tcp.c |   14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

@@ -1069,7 +1069,8 @@ iscsi_tcp_conn_setup(struct iscsi_cls_se
 	struct iscsi_cls_conn *cls_conn;
 	struct iscsi_tcp_conn *tcp_conn;
 
-	cls_conn = iscsi_conn_setup(cls_session, sizeof(*tcp_conn), conn_idx);
+	cls_conn = iscsi_conn_setup(cls_session,
+				    sizeof(*tcp_conn) + dd_data_size, conn_idx);
 	if (!cls_conn)
 		return NULL;
 	conn = cls_conn->dd_data;

@@ -1081,22 +1082,13 @@ iscsi_tcp_conn_setup(struct iscsi_cls_se
 
 	tcp_conn = conn->dd_data;
 	tcp_conn->iscsi_conn = conn;
-
-	tcp_conn->dd_data = kzalloc(dd_data_size, GFP_KERNEL);
-	if (!tcp_conn->dd_data) {
-		iscsi_conn_teardown(cls_conn);
-		return NULL;
-	}
+	tcp_conn->dd_data = conn->dd_data + sizeof(*tcp_conn);
 	return cls_conn;
 }
 EXPORT_SYMBOL_GPL(iscsi_tcp_conn_setup);
 
 void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn)
 {
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
-
-	kfree(tcp_conn->dd_data);
 	iscsi_conn_teardown(cls_conn);
 }
 EXPORT_SYMBOL_GPL(iscsi_tcp_conn_teardown);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Michael Chan <[email protected]>

commit db1d350fcb156b58f66a67680617077bcacfe6fc upstream.

During NETDEV_UP, we use symbol_get() to get the net driver's cnic probe function. This sometimes doesn't work if NETDEV_UP happens right after NETDEV_REGISTER and the net driver is still running module init code. As a result, the cnic device may not be discovered. We fix this by probing on all NETDEV events if the device's netif_running state is up.

---
 drivers/net/cnic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2718,7 +2718,7 @@ static int cnic_netdev_event(struct noti
 
 	dev = cnic_from_netdev(netdev);
 
-	if (!dev && (event == NETDEV_REGISTER || event == NETDEV_UP)) {
+	if (!dev && (event == NETDEV_REGISTER || netif_running(netdev))) {
 		/* Check for the hot-plug device */
 		dev = is_cnic_dev(netdev);
 		if (dev) {

@@ -2734,7 +2734,7 @@ static int cnic_netdev_event(struct noti
 		else if (event == NETDEV_UNREGISTER)
 			cnic_ulp_exit(dev);
 
-		if (event == NETDEV_UP) {
+		if (event == NETDEV_UP || (new_dev && netif_running(netdev))) {
 			if (cnic_register_netdev(dev) != 0) {
 				cnic_put(dev);
 				goto done;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Takashi Iwai <[email protected]>

commit 5fe6e0151dbd969f5fbcd94d05c968b76d76952b upstream.

When the headphone pin is assigned as primary output to line_out_pins[], the automatic HP-pin assignment by ASSID must be suppressed. Otherwise a wrong pin might be assigned to the headphone and breaks the auto-mute.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104

---
 sound/pci/hda/patch_realtek.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -1337,7 +1337,9 @@ do_sku:
 	 * 15   : 1 --> enable the function "Mute internal speaker
 	 *	        when the external headphone out jack is plugged"
 	 */
-	if (!spec->autocfg.hp_pins[0]) {
+	if (!spec->autocfg.hp_pins[0] &&
+	    !(spec->autocfg.line_out_pins[0] &&
+	      spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
 		hda_nid_t nid;
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: James Bottomley <[email protected]>

commit 96067723e46b0dd24ae7b934085ab4eff4d26a1b upstream.

Following reports on the list, it looks like the 3e-9xxx driver will leak dma mappings every time we get a transient queueing error back from the card. This is because it maps the sg list in the routine that sends the command, but doesn't unmap again in the transient failure path (even though the command is sent back to the block layer). Fix by unmapping before returning the status.

---
 drivers/scsi/3w-9xxx.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1786,10 +1786,12 @@ static int twa_scsi_queue(struct scsi_cm
 	switch (retval) {
 	case SCSI_MLQUEUE_HOST_BUSY:
 		twa_free_request_id(tw_dev, request_id);
+		twa_unmap_scsi_data(tw_dev, request_id);
 		break;
 	case 1:
 		tw_dev->state[request_id] = TW_S_COMPLETED;
 		twa_free_request_id(tw_dev, request_id);
+		twa_unmap_scsi_data(tw_dev, request_id);
 		SCpnt->result = (DID_ERROR << 16);
 		done(SCpnt);
 		retval = 0;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Vasily Averin <[email protected]>

commit d0efab26f89506387a1bde898556660e06d7eb15 upstream.

scsi reset on hardware with enabled MSI interrupts generates WARNING message

[11027.798722] aacraid: Host adapter abort request (0,0,0,0)
[11027.798814] aacraid: Host adapter reset request. SCSI hang ?
[11087.762237] aacraid: SCSI bus appears hung
[11135.082543] ------------[ cut here ]------------
[11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290()

---
 drivers/scsi/aacraid/commsup.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1202,6 +1202,8 @@ static int _aac_reset_adapter(struct aac
 	kfree(aac->queues);
 	aac->queues = NULL;
 	free_irq(aac->pdev->irq, aac);
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Mark Salyzyn <[email protected]>

commit 24926dadc41cc566e974022b0e66231b82c6375f upstream.

In an enclosure model where there are chaining expanders to a large body of storage, it was discovered that libsas, responding to a broadcast event change, would only revalidate the domain of first child expander in the list.

The issue is that the pointer value to the discovered source device was used to break out of the loop, rather than the content of the pointer.

This still remains non-compliant as the revalidate domain code is supposed to loop through all child expanders, and not stop at the first one it finds that reports a change count. However, the design of this routine does not allow multiple device discoveries and that would be a more complicated set of patches reserved for another day. We are fixing the glaring bug rather than refactoring the code.

---
 drivers/scsi/libsas/sas_expander.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1712,7 +1712,7 @@ static int sas_find_bcast_dev(struct dom
 	list_for_each_entry(ch, &ex->children, siblings) {
 		if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
 			res = sas_find_bcast_dev(ch, src_dev);
-			if (src_dev)
+			if (*src_dev)
 				return res;
 		}
 	}

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jouni Malinen <[email protected]>

commit 1b9ca0272ffae212e726380f66777b30a56ed7a5 upstream.

Incorrect variable was used in validating the akm_suites array from NL80211_ATTR_AKM_SUITES. In addition, there was no explicit validation of the array length (we only have room for NL80211_MAX_NR_AKM_SUITES).

This can result in a buffer write overflow for stack variables with arbitrary data from user space. The nl80211 commands using the affected functionality require GENL_ADMIN_PERM, so this is only exposed to admin users.

---
 net/wireless/nl80211.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

@@ -3364,9 +3364,12 @@ static int nl80211_crypto_settings(struc
 		if (len % sizeof(u32))
 			return -EINVAL;
 
+		if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
+			return -EINVAL;
+
 		memcpy(settings->akm_suites, data, len);
 
-		for (i = 0; i < settings->n_ciphers_pairwise; i++)
+		for (i = 0; i < settings->n_akm_suites; i++)
 			if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
 				return -EINVAL;
 	}

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Changli Gao <[email protected]>

commit 2cb4b05e7647891b46b91c07c9a60304803d1688 upstream.

direct_splice_actor() shouldn't use sd->pos, as sd->pos is for file reading, file->f_pos should be used instead.

---
 fs/splice.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1221,7 +1221,8 @@ static int direct_splice_actor(struct pi
 {
 	struct file *file = sd->u.file;
 
-	return do_splice_from(pipe, file, &sd->pos, sd->total_len, sd->flags);
+	return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
+			      sd->flags);
 }
 
 /**

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Mark Salyzyn <[email protected]>

commit a73914c35b05d80f8ce78288e10056c91090b666 upstream.

When a wide port is being utilized to a target, if one disables only one of the
phys, we get an OS crash:

BUG: unable to handle kernel NULL pointer dereference at
0000000000000238
IP: [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
PGD 4103f5067 PUD 41dba9067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/bus/pci/slots/5/address
CPU 0
Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4

ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]

Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4

ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3 jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]
Pid: 5146, comm: scsi_wq_5 Not tainted 2.6.32-71.29.1.el6.lustre.7.x86_64 #1 Storage Server

RIP: 0010:[<ffffffff814ca9b1>]  [<ffffffff814ca9b1>]
mutex_lock+0x21/0x50
RSP: 0018:ffff8803e4e33d30  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000238 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8803e664c800 RDI: 0000000000000238
RBP: ffff8803e4e33d40 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000238 R14: ffff88041acb7200 R15: ffff88041c51ada0
FS:  0000000000000000(0000) GS:ffff880028200000(0000)

knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000238 CR3: 0000000410143000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_wq_5 (pid: 5146, threadinfo ffff8803e4e32000, task ffff8803e4e294a0)

Stack:
 ffff8803e664c800 0000000000000000 ffff8803e4e33d70 ffffffffa001f06e
<0> ffff8803e4e33d60 ffff88041c51ada0 ffff88041acb7200 ffff88041bc0aa00
<0> ffff8803e4e33d90 ffffffffa0032b6c 0000000000000014 ffff88041acb7200
Call Trace:
 [<ffffffffa001f06e>] sas_port_delete_phy+0x2e/0xa0 [scsi_transport_sas]
 [<ffffffffa0032b6c>] sas_unregister_devs_sas_addr+0xac/0xe0 [libsas]
 [<ffffffffa0034914>] sas_ex_revalidate_domain+0x204/0x330 [libsas]
 [<ffffffffa00307f0>] ? sas_revalidate_domain+0x0/0x90 [libsas]
 [<ffffffffa0030855>] sas_revalidate_domain+0x65/0x90 [libsas]
 [<ffffffff8108c7d0>] worker_thread+0x170/0x2a0
 [<ffffffff81091ea0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8108c660>] ? worker_thread+0x0/0x2a0
 [<ffffffff81091b36>] kthread+0x96/0xa0
 [<ffffffff810141ca>] child_rip+0xa/0x20
 [<ffffffff81091aa0>] ? kthread+0x0/0xa0
 [<ffffffff810141c0>] ? child_rip+0x0/0x20
Code: ff ff 85 c0 75 ed eb d6 66 90 55 48 89 e5 48 83 ec 10 48 89 1c 24

4c 89 64 24 08 0f 1f 44 00 00 48 89 fb e8 92 f4 ff ff 48 89 df <f0> ff 0f 79 05 e8 25 00 00 00 65 48 8b 04 25 08 cc 00 00 48 2d RIP [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
RSP <ffff8803e4e33d30>
CR2: 0000000000000238

The following patch is admittedly a band-aid, and does not solve the root cause, but it still is a good candidate for hardening as a pointer check before reference.

---
 drivers/scsi/libsas/sas_expander.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

@@ -1757,10 +1757,12 @@ static void sas_unregister_devs_sas_addr
 		sas_disable_routing(parent, phy->attached_sas_addr);
 	}
 	memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
-	sas_port_delete_phy(phy->port, phy->phy);
-	if (phy->port->num_phys == 0)
-		sas_port_delete(phy->port);
-	phy->port = NULL;
+	if (phy->port) {
+		sas_port_delete_phy(phy->port, phy->phy);
+		if (phy->port->num_phys == 0)
+			sas_port_delete(phy->port);
+		phy->port = NULL;
+	}
 }
 
 static int sas_discover_bfs_by_root_level(struct domain_device *root,

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Mark Nelson <[email protected]>

commit 3c4aa91f21f65b7b40bdfb015eacbcb8453ccae2 upstream.

Like e65cc194f7628ecaa02462f22f42fb09b50dcd49 this patch enables 64bit DMA for the AHCI SATA controller of a board that has the SB600 southbridge. In this case though we're enabling 64bit DMA for the Asus M3A motherboard. It is a new enough board that all of the BIOS releases since the initial release (0301 from 2007-10-22) work correctly with 64bit DMA enabled.

---
 drivers/ata/ahci.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

@@ -2769,6 +2769,18 @@ static bool ahci_sb600_enable_64bit(stru
 				DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
 			},
 		},
+		/*
+		 * All BIOS versions for the Asus M3A support 64bit DMA.
+		 * (all release versions from 0301 to 1206 were tested)
+		 */
+		{
+			.ident = "ASUS M3A",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR,
+					  "ASUSTeK Computer INC."),
+				DMI_MATCH(DMI_BOARD_NAME, "M3A"),
+			},
+		},
 		{ }
 	};
 	const struct dmi_system_id *match;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jeremiah Matthey <[email protected]>

commit f5e4282586dc0c9dab8c7d32e6c43aa07f68586b upstream.

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a timeout occurs when the usbhid driver attempts to initialize them. The patch just adds the signature for these keyboards to the hid-quirks list with the setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the timeout to occur.

---
 drivers/hid/hid-ids.h           |    3 +++
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 4 insertions(+)

@@ -389,6 +389,9 @@
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
 
+#define USB_VENDOR_ID_SIGMA_MICRO	0x1c4f
+#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD	0x0002
+
 #define USB_VENDOR_ID_SONY			0x054c
 #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE	0x024b
 #define USB_DEVICE_ID_SONY_PS3_CONTROLLER	0x0268

@@ -65,6 +65,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
+	{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
 	{ 0, 0 }
 };
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jean Delvare <[email protected]>

commit bf164c58e58328c40ebc597a8ac00cc6840f9703 upstream.

The w83627ehf driver is improperly reporting thermal diode sensors as type 2, instead of 3. This caused "sensors" and possibly other monitoring tools to report these sensors as "transistor" instead of "thermal diode".

Furthermore, diode subtype selection (CPU vs. external) is only supported by the original W83627EHF/EHG. All later models only support CPU diode type, and some (NCT6776F) don't even have the register in question so we should avoid reading from it.

---
 drivers/hwmon/w83627ehf.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

@@ -1239,7 +1239,8 @@ static void w83627ehf_device_remove_file
 }
 
 /* Get the monitoring functions started */
-static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
+						   enum kinds kind)
 {
 	int i;
 	u8 tmp, diode;

@@ -1268,10 +1269,16 @@ static inline void __devinit w83627ehf_i
 		w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
 
 	/* Get thermal sensor types */
-	diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+	switch (kind) {
+	case w83627ehf:
+		diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+		break;
+	default:
+		diode = 0x70;
+	}
 	for (i = 0; i < 3; i++) {
 		if ((tmp & (0x02 << i)))
-			data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 2;
+			data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
 		else
 			data->temp_type[i] = 4; /* thermistor */
 	}

@@ -1319,7 +1326,7 @@ static int __devinit w83627ehf_probe(str
 	}
 
 	/* Initialize the chip */
-	w83627ehf_init_device(data);
+	w83627ehf_init_device(data, sio_data->kind);
 
 	data->vrm = vid_which_vrm();
 	superio_enter(sio_data->sioreg);

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Matthew Daley <[email protected]>

commit 7f81e25befdfb3272345a2e775f520e1d515fa20 upstream.

x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check.

---
 net/x25/af_x25.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -294,7 +294,8 @@ static struct sock *x25_find_listener(st
 			 * Found a listening socket, now check the incoming
 			 * call user data vs this sockets call user data
 			 */
-			if(skb->len > 0 && x25_sk(s)->cudmatchlength > 0) {
+			if (x25_sk(s)->cudmatchlength > 0 &&
+				skb->len >= x25_sk(s)->cudmatchlength) {
 				if((memcmp(x25_sk(s)->calluserdata.cuddata,
 					skb->data,
 					x25_sk(s)->cudmatchlength)) == 0) {

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Xiaotian Feng <[email protected]>

commit 5478755616ae2ef1ce144dded589b62b2a50d575 upstream.

commit 9284bcf checks for proper length of iov entries in blk_rq_map_user_iov(). But if the map is unaligned, kernel will break out the loop without checking for the proper length. So we need to check the proper length before the unalign check.

---
 block/blk-map.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -201,12 +201,13 @@ int blk_rq_map_user_iov(struct request_q
 	for (i = 0; i < iov_count; i++) {
 		unsigned long uaddr = (unsigned long)iov[i].iov_base;
 
+		if (!iov[i].iov_len)
+			return -EINVAL;
+
 		if (uaddr & queue_dma_alignment(q)) {
 			unaligned = 1;
 			break;
 		}
-		if (!iov[i].iov_len)
-			return -EINVAL;
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)

This will catch an unaligned zero-length entry. But there's still no check for zero-length iov entries *after* the unaligned entry.

[...]

Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.

Then the fix should go upstream first :)

thanks,

greg k-h

But if I'm right, this is a non-fix and doesn't belong in the longterm update.

Ben.

Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Doesn't this still fix one issue here, just not both of them described, right?

thanks,

greg k-h

Not really.

We've got a list from 0 - 100. We should be checking them all. If number 50 is unaligned in the old version we would check 0 - 50, but with this patch applied we check from 0 to 51.

regards,
dan carpenter

Ugh, you are right.

Xiaotian, please fix this correctly upstream, I'll go drop this patch for now from the stable trees.

thanks,

greg k-h

Yeah. I think you're right. Are you going to send the patch?

regards,
dan carpenter

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Kautuk Consul <[email protected]>

commit e8df1674d383d2ecc6efa8d7dba74c03aafdfdd7 upstream.

If the usermode app does an ioctl over this serial device by using TIOCMIWAIT, then the code will wait by setting the current task state to TASK_INTERRUPTIBLE and then calling schedule(). This will be woken up by the qt2_process_modem_status on URB completion when the port_extra->shadowMSR is set to the new modem status.

However, this could result in a lost wakeup scenario due to a race in the logic in the qt2_ioctl(TIOCMIWAIT) loop and the URB completion for new modem status in qt2_process_modem_status.
Due to this, the usermode app's task will continue to sleep despite a change in the modem status.

---
 drivers/staging/quatech_usb2/quatech_usb2.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

@@ -921,9 +921,10 @@ static int qt2_ioctl(struct tty_struct *
 		dbg("%s() port %d, cmd == TIOCMIWAIT enter",
 			__func__, port->number);
 		prev_msr_value = port_extra->shadowMSR  & QT2_SERIAL_MSR_MASK;
+		barrier();
+		__set_current_state(TASK_INTERRUPTIBLE);
 		while (1) {
 			add_wait_queue(&port_extra->wait, &wait);
-			set_current_state(TASK_INTERRUPTIBLE);
 			schedule();
 			dbg("%s(): port %d, cmd == TIOCMIWAIT here\n",
 				__func__, port->number);

@@ -931,9 +932,12 @@ static int qt2_ioctl(struct tty_struct *
 			/* see if a signal woke us up */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+			set_current_state(TASK_INTERRUPTIBLE);
 			msr_value = port_extra->shadowMSR & QT2_SERIAL_MSR_MASK;
-			if (msr_value == prev_msr_value)
+			if (msr_value == prev_msr_value) {
+				__set_current_state(TASK_RUNNING);
 				return -EIO;  /* no change - error */
+			}
 			if ((arg & TIOCM_RNG &&
 				((prev_msr_value & QT2_SERIAL_MSR_RI) ==
 					(msr_value & QT2_SERIAL_MSR_RI))) ||

@@ -946,6 +950,7 @@ static int qt2_ioctl(struct tty_struct *
 				(arg & TIOCM_CTS &&
 				((prev_msr_value & QT2_SERIAL_MSR_CTS) ==
 					(msr_value & QT2_SERIAL_MSR_CTS)))) {
+				__set_current_state(TASK_RUNNING);
 				return 0;
 			}
 		} /* end inifinite while */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Rigbert Hamisch <[email protected]>

commit 1bfac90d1b8e63a4d44158c3445d8fda3fb6d5eb upstream.

add device ID for "HP un2430 Mobile Broadband Module"

---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

@@ -26,6 +26,7 @@ static struct usb_device_id id_table[] =
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
 	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
 	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Kautuk Consul <[email protected]>

commit 0e6c7f746ea99089fb3263709075c20485a479ae upstream.

There are 2 situations wherein the xhci_ring* might not get freed:
- When xhci_ring_alloc() -> xhci_segment_alloc() returns NULL and we goto the fail: label in xhci_ring_alloc. In this case, the ring will not get kfreed.
- When the num_segs argument to xhci_ring_alloc is passed as 0 and we try to free the rung after that.
( This doesn't really happen as of now in the code but we seem to
be entertaining num_segs=0 in xhci_ring_alloc )

This should be backported to kernels as old as 2.6.31.

---
 drivers/usb/host/xhci-mem.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

@@ -110,18 +110,20 @@ void xhci_ring_free(struct xhci_hcd *xhc
 	struct xhci_segment *seg;
 	struct xhci_segment *first_seg;
 
-	if (!ring || !ring->first_seg)
+	if (!ring)
 		return;
-	first_seg = ring->first_seg;
-	seg = first_seg->next;
-	xhci_dbg(xhci, "Freeing ring at %p\n", ring);
-	while (seg != first_seg) {
-		struct xhci_segment *next = seg->next;
-		xhci_segment_free(xhci, seg);
-		seg = next;
+	if (ring->first_seg) {
+		first_seg = ring->first_seg;
+		seg = first_seg->next;
+		xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+		while (seg != first_seg) {
+			struct xhci_segment *next = seg->next;
+			xhci_segment_free(xhci, seg);
+			seg = next;
+		}
+		xhci_segment_free(xhci, first_seg);
+		ring->first_seg = NULL;
 	}
-	xhci_segment_free(xhci, first_seg);
-	ring->first_seg = NULL;
 	kfree(ring);
 }
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Anton Blanchard <[email protected]>

commit 5d7c20b7fa5c6ca19e871b4050e321c99d32bd43 upstream.

During kdump testing I noticed timeouts when initialising each IPR adapter. While the driver has logic to detect an adapter in an indeterminate state, it wasn't triggering and each adapter went through a 5 minute timeout before finally going operational.

Some analysis showed the needs_hard_reset flag wasn't getting set. We can check the reset_devices kernel parameter which is set by kdump and force a full reset. This fixes the problem.

---
 drivers/scsi/ipr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -7668,7 +7668,7 @@ static int __devinit ipr_probe_ioa(struc
 	uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
 	if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
 		ioa_cfg->needs_hard_reset = 1;
-	if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
+	if ((interrupts & IPR_PCII_ERROR_INTERRUPTS) || reset_devices)
 		ioa_cfg->needs_hard_reset = 1;
 	if (interrupts & IPR_PCII_IOA_UNIT_CHECKED)
 		ioa_cfg->ioa_unit_checked = 1;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jack Wang <[email protected]>

commit bb041a0e9c31229071b6e56e1d0d8374af0d2038 upstream.

Libsas forget to set the sas_address and device type of rphy lead to file under /sys/class/sas_x show wrong value, fix that.

---
 drivers/scsi/libsas/sas_expander.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -198,6 +198,8 @@ static void sas_set_ex_phy(struct domain
 	phy->virtual = dr->virtual;
 	phy->last_da_index = -1;
 
+	phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
+	phy->phy->identify.device_type = phy->attached_dev_type;
 	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 	phy->phy->identify.target_port_protocols = phy->attached_tproto;
 	phy->phy->identify.phy_identifier = phy_id;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: David Henningsson <[email protected]>

commit cc667a72d471e79fd8e5e291ea115923cf44dca0 upstream.

The revision 0x100300 was found for ALC662. It seems to work well with patch_alc662.

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -17685,6 +17685,8 @@ static struct hda_codec_preset snd_hda_p
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
 	  .patch = patch_alc662 },
+	{ .id = 0x10ec0662, .rev = 0x100300, .name = "ALC662 rev3",
+	  .patch = patch_alc662 },
 	{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
 	{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
 	{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Josh Stone <[email protected]>

commit 315eb8a2a1b7f335d40ceeeb11b9e067475eb881 upstream.

When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I noticed a warning about the asm operand for test_bit in kprobes' can_boost. I discovered that this caused only the first long of twobyte_is_boostable[] to be output.

Jakub filed and fixed gcc PR50571 to correct the warning and this output issue. But to solve it for less current gcc, we can make kprobes' twobyte_is_boostable[] non-const, and it won't be optimized out.

Before:

CC arch/x86/kernel/kprobes.o
In file included from include/linux/bitops.h:22:0,

                   from include/linux/kernel.h:17,
                   from [...]/arch/x86/include/asm/percpu.h:44,
                   from [...]/arch/x86/include/asm/current.h:5,
                   from [...]/arch/x86/include/asm/processor.h:15,
                   from [...]/arch/x86/include/asm/atomic.h:6,
                   from include/linux/atomic.h:4,
                   from include/linux/mutex.h:18,
                   from include/linux/notifier.h:13,
                   from include/linux/kprobes.h:34,
                   from arch/x86/kernel/kprobes.c:43:

[...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’:
[...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input
without lvalue in asm operand 1 is deprecated [enabled by default]

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 00 00 00 00 	bt     %eax,0x0
                          554: R_386_32	.rodata.cst4

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

arch/x86/kernel/kprobes.o: file format elf32-i386

Contents of section .data:
0000 48000000 00000000 00000000 00000000 H...............
Contents of section .rodata.cst4:
0000 4c030000 L...

Only a single long of twobyte_is_boostable[] is in the object file.

After, without the const on twobyte_is_boostable:

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 20 00 00 00 	bt     %eax,0x20
                          554: R_386_32	.data

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

arch/x86/kernel/kprobes.o: file format elf32-i386

Contents of section .data:

   0000 48000000 00000000 00000000 00000000  H...............
   0010 00000000 00000000 00000000 00000000  ................
   0020 4c030000 0f000200 ffff0000 ffcff0c0  L...............
   0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77  ....;.......&..w

Now all 32 bytes are output into .data instead.

---
 arch/x86/kernel/kprobes.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -83,8 +83,10 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kpr
 	/*
 	 * Undefined/reserved opcodes, conditional jump, Opcode Extension
 	 * Groups, and some special opcodes can not boost.
+	 * This is non-const to keep gcc from statically optimizing it out, as
+	 * variable_test_bit makes gcc think only *(unsigned long*) is used.
 	 */
-static const u32 twobyte_is_boostable[256 / 32] = {
+static u32 twobyte_is_boostable[256 / 32] = {
 	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
 	/*      ----------------------------------------------          */
 	W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Nelson Elhage <[email protected]>

commit d8805e633e054c816c47cb6e727c81f156d9253d upstream.

epoll can acquire recursively acquire ep->mtx on multiple "struct eventpoll"s at once in the case where one epoll fd is monitoring another epoll fd. This is perfectly OK, since we're careful about the lock ordering, but it causes spurious lockdep warnings. Annotate the recursion using mutex_lock_nested, and add a comment explaining the nesting rules for good measure.

Recent versions of systemd are triggering this, and it can also be demonstrated with the following trivial test program:

--------------------8<--------------------

int main(void) {
int e1, e2;
struct epoll_event evt = {
.events = EPOLLIN
};

e1 = epoll_create1(0);
e2 = epoll_create1(0);
epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
return 0;
}
--------------------8<--------------------

---
 fs/eventpoll.c |   25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

@@ -70,6 +70,15 @@
  * simultaneous inserts (A into B and B into A) from racing and
  * constructing a cycle without either insert observing that it is
  * going to.
+ * It is necessary to acquire multiple "ep->mtx"es at once in the
+ * case when one epoll fd is added to another. In this case, we
+ * always acquire the locks in the order of nesting (i.e. after
+ * epoll_ctl(e1, EPOLL_CTL_ADD, e2), e1->mtx will always be acquired
+ * before e2->mtx). Since we disallow cycles of epoll file
+ * descriptors, this ensures that the mutexes are well-ordered. In
+ * order to communicate this nesting to lockdep, when walking a tree
+ * of epoll file descriptors, we use the current recursion depth as
+ * the lockdep subkey.
  * It is possible to drop the "ep->mtx" and to use the global
  * mutex "epmutex" (together with "ep->lock") to have it working,
  * but having "ep->mtx" will make the interface more scalable.

@@ -452,13 +461,15 @@ static void ep_unregister_pollwait(struc
  * @ep: Pointer to the epoll private data structure.
  * @sproc: Pointer to the scan callback.
  * @priv: Private opaque data passed to the @sproc callback.
+ * @depth: The current depth of recursive f_op->poll calls.
  *
  * Returns: The same integer error code returned by the @sproc callback.
  */
 static int ep_scan_ready_list(struct eventpoll *ep,
 			      int (*sproc)(struct eventpoll *,
 					   struct list_head *, void *),
-			      void *priv)
+			      void *priv,
+			      int depth)
 {
 	int error, pwake = 0;
 	unsigned long flags;

@@ -469,7 +480,7 @@ static int ep_scan_ready_list(struct eve
 	 * We need to lock this because we could be hit by
 	 * eventpoll_release_file() and epoll_ctl().
 	 */
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, depth);
 
 	/*
 	 * Steal the ready list, and re-init the original one to the

@@ -658,7 +669,7 @@ static int ep_read_events_proc(struct ev
 
 static int ep_poll_readyevents_proc(void *priv, void *cookie, int call_nests)
 {
-	return ep_scan_ready_list(priv, ep_read_events_proc, NULL);
+	return ep_scan_ready_list(priv, ep_read_events_proc, NULL, call_nests + 1);
 }
 
 static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)

@@ -724,7 +735,7 @@ void eventpoll_release_file(struct file
 
 		ep = epi->ep;
 		list_del_init(&epi->fllink);
-		mutex_lock(&ep->mtx);
+		mutex_lock_nested(&ep->mtx, 0);
 		ep_remove(ep, epi);
 		mutex_unlock(&ep->mtx);
 	}

@@ -1120,7 +1131,7 @@ static int ep_send_events(struct eventpo
 	esed.maxevents = maxevents;
 	esed.events = events;
 
-	return ep_scan_ready_list(ep, ep_send_events_proc, &esed);
+	return ep_scan_ready_list(ep, ep_send_events_proc, &esed, 0);
 }
 
 static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,

@@ -1215,7 +1226,7 @@ static int ep_loop_check_proc(void *priv
 	struct rb_node *rbp;
 	struct epitem *epi;
 
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, call_nests + 1);
 	for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
 		epi = rb_entry(rbp, struct epitem, rbn);
 		if (unlikely(is_file_epoll(epi->ffd.file))) {

@@ -1357,7 +1368,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 	}
 
 
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, 0);
 
 	/*
 	 * Try to lookup the file inside our RB tree, Since we grabbed "mtx"

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Johannes Stezenbach <[email protected]>

commit 236c448cb6e7f82096101e1ace4b77f8b38f82c8 upstream.

Report the number of dropped packets instead of zero when using the binary usbmon interface with tcpdump.

# tcpdump -i usbmon1 -w dump
tcpdump: listening on usbmon1, link-type USB_LINUX_MMAPPED (USB with padded Linux header), capture size 65535 bytes
^C2155 packets captured
2155 packets received by filter
1019 packets dropped by kernel

---
 drivers/usb/mon/mon_bin.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1041,7 +1041,7 @@ static int mon_bin_ioctl(struct inode *i
 		nevents = mon_bin_queued(rp);
 
 		sp = (struct mon_bin_stats __user *)arg;
-		if (put_user(rp->cnt_lost, &sp->dropped))
+		if (put_user(ndropped, &sp->dropped))
 			return -EFAULT;
 		if (put_user(nevents, &sp->queued))
 			return -EFAULT;

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Luben Tuikov <[email protected]>

commit e16da02fcdf1c5e824432f88abf42623dafdf191 upstream.

This patch solves two things:
1) Enables autosense emulation code to correctly interpret descriptor format sense data, and
2) Fixes a bug whereby the autosense emulation code would overwrite descriptor format sense data with SENSE KEY HARDWARE ERROR in fixed format, to incorrectly look like this:

Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  Sense Key : Recovered Error [current] [descriptor]
Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex):
Oct 21 14:11:07 localhost kernel:        72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
Oct 21 14:11:07 localhost kernel:        00 4f 00 c2 00 50
Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  ASC=0x4 ASCQ=0x1d

---
 drivers/usb/storage/transport.c |   34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

@@ -693,6 +693,9 @@ void usb_stor_invoke_transport(struct sc
 		int temp_result;
 		struct scsi_eh_save ses;
 		int sense_size = US_SENSE_SIZE;
+		struct scsi_sense_hdr sshdr;
+		const u8 *scdd;
+		u8 fm_ili;
 
 		/* device supports and needs bigger sense buffer */
 		if (us->fflags & US_FL_SANE_SENSE)

@@ -776,32 +779,30 @@ Retry_Sense:
 			srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
 		}
 
+		scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				     &sshdr);
+
 		US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
 		US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
-			  srb->sense_buffer[0],
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+			  sshdr.response_code, sshdr.sense_key,
+			  sshdr.asc, sshdr.ascq);
 #ifdef CONFIG_USB_STORAGE_DEBUG
-		usb_stor_show_sense(
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+		usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq);
 #endif
 
 		/* set the result so the higher layers expect this data */
 		srb->result = SAM_STAT_CHECK_CONDITION;
 
+		scdd = scsi_sense_desc_find(srb->sense_buffer,
+					    SCSI_SENSE_BUFFERSIZE, 4);
+		fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
 		/* We often get empty sense data.  This could indicate that
 		 * everything worked or that there was an unspecified
 		 * problem.  We have to decide which.
 		 */
-		if (	/* Filemark 0, ignore EOM, ILI 0, no sense */
-				(srb->sense_buffer[2] & 0xaf) == 0 &&
-			/* No ASC or ASCQ */
-				srb->sense_buffer[12] == 0 &&
-				srb->sense_buffer[13] == 0) {
-
+		if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+		    fm_ili == 0) {
 			/* If things are really okay, then let's show that.
 			 * Zero out the sense buffer so the higher layers
 			 * won't realize we did an unsolicited auto-sense.

@@ -816,7 +817,10 @@ Retry_Sense:
 			 */
 			} else {
 				srb->result = DID_ERROR << 16;
-				srb->sense_buffer[2] = HARDWARE_ERROR;
+				if ((sshdr.response_code & 0x72) == 0x72)
+					srb->sense_buffer[1] = HARDWARE_ERROR;
+				else
+					srb->sense_buffer[2] = HARDWARE_ERROR;
 			}
 		}
 	}

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Serge Hallyn <[email protected]>

commit aec01c5895051849ed842dc5b8794017a7751f28 upstream.

Alan Stern points out that after spin_unlock(&ps->lock) there is no guarantee that ps->pid won't be freed. Since kill_pid_info_as_uid() is called after the spin_unlock(), the pid passed to it must be pinned.

---
 drivers/usb/core/devio.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -403,7 +403,7 @@ static void async_completed(struct urb *
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		pid = as->pid;
+		pid = get_pid(as->pid);
 		uid = as->uid;
 		euid = as->euid;
 		secid = as->secid;

@@ -416,9 +416,11 @@ static void async_completed(struct urb *
 		cancel_bulk_urbs(ps, as->bulk_addr);
 	spin_unlock(&ps->lock);
 
-	if (signr)
+	if (signr) {
 		kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
 				      euid, secid);
+		put_pid(pid);
+	}
 
 	wake_up(&ps->wait);
 }

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Denis Pershin <[email protected]>

commit 65e52f41fa944cef2e6d4222b8c54f46cc575214 upstream.

here is the patch to support Owen SI-30 device.
This is a pulse counter controller.
http://www.owen.ru/en/catalog/93788515

usb-drivers output:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03eb ProdID=0030 Rev=01.01
C:  #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=00 Driver=cdc_acm
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm

This patch is installed on my home system which receives data from this controller connected to cold water counter.

---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -1606,6 +1606,9 @@ static struct usb_device_id acm_ids[] =
 	{ NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
+	/* Support for Owen devices */
+	{ USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */
+
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
 	/* control interfaces without any protocol set */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Oliver Neukum <[email protected]>

commit 2394d67e446bf616a0885167d5f0d397bdacfdfc upstream.

The new runtime PM code has shown that many webcams suffer from a race condition that may crash them upon resume. Runtime PM is especially prone to show the problem because it retains power to the cameras at all times. However system suspension may also crash the devices and retain power to the devices.
The only way to solve this problem without races is in usbcore with the RESET_RESUME quirk.

---
 drivers/usb/core/quirks.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

@@ -38,6 +38,24 @@ static const struct usb_device_id usb_qu
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C200 */
+	{ USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C250 */
+	{ USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam B/C500 */
+	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C310 */
+	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C270 */
+	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 

@@ -69,6 +87,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Eric Benoit <[email protected]>

commit 598f0b703506da841d3459dc0c48506be14d1778 upstream.

Add vendor and product ID for the SMART USB to serial adapter. These were meant to be used with their SMART Board whiteboards, but can be re-purposed for other tasks. Tested and working (at at least 9600 bps).

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    5 +++++
 2 files changed, 6 insertions(+)

@@ -102,6 +102,7 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
+	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

@@ -148,3 +148,8 @@
 /* WinChipHead USB->RS 232 adapter */
 #define WINCHIPHEAD_VENDOR_ID		0x4348
 #define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID	0x0b8c
+#define SMART_PRODUCT_ID	0x2303
+

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Hakan Kvist <[email protected]>

commit 74bdf22b5c3858b06af46f19d05c23e76c40a3bb upstream.

Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

@@ -209,6 +209,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
 	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },

@@ -419,9 +419,11 @@
 #define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
 
 /*
- * DSS-20 Sync Station for Sony Ericsson P800
+ * Sony Ericsson product ids
  */
-#define FTDI_DSS20_PID          0xFC82
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
 
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Peter Stuge <[email protected]>

commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream.

Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector.

Tested with EK-LM3S9B90, where the BD-ICDI board is included.

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 3 insertions(+)

@@ -748,6 +748,8 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },

@@ -53,6 +53,7 @@
 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
 
 #define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
 

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Jerry Huang <[email protected]>

commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream.

For USB CONTROL transaction, when the data length is zero, the IN package is needed to finish this transaction in status stage.

---
 drivers/usb/host/fhci-sched.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

@@ -1,7 +1,7 @@
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright (c) Freescale Semicondutor, Inc. 2006, 2011.
  *               Shlomi Gridish <[email protected]>
  *               Jerry Huang <[email protected]>
  * Copyright (c) Logic Product Development, Inc. 2007

@@ -810,9 +810,11 @@ void fhci_queue_urb(struct fhci_hcd *fhc
 		ed->dev_addr = usb_pipedevice(urb->pipe);
 		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
 			usb_pipeout(urb->pipe));
+		/* setup stage */
 		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
 			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
 
+		/* data stage */
 		if (data_len > 0) {
 			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
 				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :

@@ -820,9 +822,18 @@ void fhci_queue_urb(struct fhci_hcd *fhc
 				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
 				true);
 		}
-		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
-			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
-			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
+		/* status stage */
+		if (data_len > 0)
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				(usb_pipeout(urb->pipe) ? FHCI_TA_IN :
+							  FHCI_TA_OUT),
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		else
+			 td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
 		urb_state = US_CTRL_SETUP;
 		break;
 	case FHCI_TF_ISO:

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Josh Boyer <[email protected]>

commit 5fa224295f0e0358c8bc0e5390702338df889def upstream.

The [email protected] email address has been replaced with the [email protected] mailing list. Change the stable kernel rules to reference the new list instead of the semi-defunct email alias.

---
 Documentation/stable_kernel_rules.txt |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -25,13 +25,13 @@ Rules on what kind of patches are accept
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   [email protected].
+   [email protected].
  - The sender will receive an ACK when the patch has been accepted into the
    queue, or a NAK if the patch is rejected.  This response might take a few
    days, according to the developer's schedules.
  - If accepted, the patch will be added to the -stable queue, for review by
    other developers and by the relevant subsystem maintainer.
- - If the [email protected] address is added to a patch, when it goes into
+ - If the [email protected] address is added to a patch, when it goes into
    Linus's tree it will automatically be emailed to the stable team.
  - Security patches should not be sent to this alias, but instead to the
    documented [email protected] address.

Greg KH wrote...

(...)

Just out of curiosity:

Am 03.11.2011 um 09:08 schrieb Christoph Biedl:

The original lines should have had the [email protected] email address, looks like Greg's scripts eagerly replaced those with the new address…

Cheers,
Sven

Ugh, yes, that was due to me running a script on the emails to keep any old [email protected] address out of them when I sent them out. The original patch is fine, thanks for checking.

greg k-h

2.6.32-longterm review patch. If anyone has any objections, please let us know.

------------------

From: Milan Broz <[email protected]>

commit ebf4127cd677e9781b450e44dfaaa1cc595efcaa upstream.

kobject_uevent() uses a multicast socket and should ignore if one of listeners cannot handle messages or nobody is listening at all.

Easily reproducible when a process in system is cloned with CLONE_NEWNET flag.

(See also http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/5256)

---
 lib/kobject_uevent.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -235,7 +235,7 @@ int kobject_uevent_env(struct kobject *k
 			retval = netlink_broadcast(uevent_sock, skb, 0, 1,
 						   GFP_KERNEL);
 			/* ENOBUFS should be handled in userspace */
-			if (retval == -ENOBUFS)
+			if (retval == -ENOBUFS || retval == -ESRCH)
 				retval = 0;
 		} else
 			retval = -ENOMEM;