Skip to contentSkip to conversation

git repos @ gitorious.org

DISCUSSION Kurt Van Dijck 4 participants 8 messages Nov 4, 2011 – Nov 7, 2011 8 messages not in the archive CAN network drivers

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): 20111103130841.GG317-MxZ6Iy/zr/UdbCeoMzGj59i2O/[email protected]

Kurt Van Dijck

author
#4 lore raw
Quoted 5 lines · Kurt Van Dijck
Quoted 4 lines · Marc Kleine-Budde
Quoted 3 lines · Oliver Hartkopp

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Any opinions on how to proceed?

Kind regards,
Kurt

A message that is not in the archive (sent off-list or not yet received): 20111104161655.GC18026-MxZ6Iy/zr/UdbCeoMzGj59i2O/[email protected]

#6 lore raw
Quoted 4 lines · Kurt Van Dijck
Quoted 3 lines · Kurt Van Dijck
Quoted 2 lines · Marc Kleine-Budde
Quoted 1 line · Oliver Hartkopp
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Any opinions on how to proceed?

Google for the iproute2 git upstream, clone it, modify it. Create a iproute2 git repo on gitorious, push your changes there.

The git workflow is basically the same as you did to copy the j1939 can-utils to your repo.

Finally send a pull request to the iprout2 upstream.

cheers, Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

_______________________________________________
Socketcan-core mailing list [email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#8 lore raw
Quoted 8 lines · Marc Kleine-Budde
Quoted 7 lines · Kurt Van Dijck
Quoted 5 lines · Kurt Van Dijck
Quoted 4 lines · Marc Kleine-Budde
Quoted 3 lines · Oliver Hartkopp

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Quoted 8 lines
Quoted 5 lines

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Any opinions on how to proceed?

Google for the iproute2 git upstream, clone it, modify it. Create a iproute2 git repo on gitorious, push your changes there.

I see not how to create on Gitorious a linux-can/iproute2-can-j1939 or similar. It looks to me as if I need to create a project first.

Quoted 14 lines

The git workflow is basically the same as you did to copy the j1939 can-utils to your repo.

Finally send a pull request to the iprout2 upstream.

cheers, Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

A message that is not in the archive (sent off-list or not yet received): 20111107080712.GA279-MxZ6Iy/zr/UdbCeoMzGj59i2O/[email protected]

#10 lore raw
Quoted 13 lines · Kurt Van Dijck
Quoted 12 lines · Marc Kleine-Budde
Quoted 11 lines · Kurt Van Dijck
Quoted 5 lines · Kurt Van Dijck
Quoted 4 lines · Marc Kleine-Budde
Quoted 3 lines · Oliver Hartkopp

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

Any opinions on how to proceed?

Google for the iproute2 git upstream, clone it, modify it. Create a iproute2 git repo on gitorious, push your changes there.

I see not how to create on Gitorious a linux-can/iproute2-can-j1939 or similar. It looks to me as if I need to create a project first.

I think via:

https://gitorious.org/projects/new

Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

_______________________________________________
Socketcan-core mailing list [email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#12 lore raw
Quoted 19 lines · Marc Kleine-Budde
Quoted 18 lines · Kurt Van Dijck
Quoted 16 lines · Marc Kleine-Budde
Quoted 4 lines · Kurt Van Dijck
Quoted 3 lines · Kurt Van Dijck
Quoted 2 lines · Marc Kleine-Budde
Quoted 1 line · Oliver Hartkopp
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Any opinions on how to proceed?

Google for the iproute2 git upstream, clone it, modify it. Create a iproute2 git repo on gitorious, push your changes there.

Quoted 6 lines
Quoted 2 lines

I see not how to create on Gitorious a linux-can/iproute2-can-j1939 or similar. It looks to me as if I need to create a project first.

I think via:

https://gitorious.org/projects/new

The website then shows:
" After you have created the project you will have the option of adding one or more repositories to the project."

My intention was to add a iproute2-j1939 repository under the project linux-can. Since I have a
https://gitorious.org/~kurt-vd/linux-can/can-j1939-modules
I think no-one would find a
https://gitorious.org/~kurt-vd/linux-j1939/iproute2-can-j1939
since both repositories belong to a different project.

Or is my last assumption wrong?
Kurt

maintainer
#13 lore raw
Quoted 30 lines · Kurt Van Dijck
Quoted 19 lines · Marc Kleine-Budde
Quoted 18 lines · Kurt Van Dijck
Quoted 16 lines · Marc Kleine-Budde
Quoted 4 lines · Kurt Van Dijck
Quoted 3 lines · Kurt Van Dijck
Quoted 2 lines · Marc Kleine-Budde
Quoted 1 line · Oliver Hartkopp
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

https://gitorious.org/~<kurts_account>/linux-can/can-modules-j1939
https://gitorious.org/~<kurts_account>/linux-can/can-utils-j1939

Since the can-j1939-modules require one to use a modified iproute2, I wanted to create an iproute-j1939 within linux-can, but I see no way to accomplish this.

Any opinions on how to proceed?

Google for the iproute2 git upstream, clone it, modify it. Create a iproute2 git repo on gitorious, push your changes there.

Quoted 6 lines
Quoted 2 lines

I see not how to create on Gitorious a linux-can/iproute2-can-j1939 or similar. It looks to me as if I need to create a project first.

I think via:

https://gitorious.org/projects/new

The website then shows:
" After you have created the project you will have the option of adding one or more repositories to the project."

Quoted 8 lines

My intention was to add a iproute2-j1939 repository under the project linux-can. Since I have a
https://gitorious.org/~kurt-vd/linux-can/can-j1939-modules
I think no-one would find a
https://gitorious.org/~kurt-vd/linux-j1939/iproute2-can-j1939
since both repositories belong to a different project.

Or is my last assumption wrong?

makes sense. let's see what I can do -
gitorious is quite web2.0isch to me :)

Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
maintainer
#14 lore raw
Quoted 2 lines · Marc Kleine-Budde

makes sense. let's see what I can do -
gitorious is quite web2.0isch to me :)

here you go:
https://gitorious.org/linux-can/iproute2

Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |