3.0.9-stable review

@@ -2767,10 +2767,10 @@ void cifs_setup_cifs_sb(struct smb_vol *
 
 /*
  * When the server doesn't allow large posix writes, only allow a wsize of
- * 128k minus the size of the WRITE_AND_X header. That allows for a write up
+ * 2^17-1 minus the size of the WRITE_AND_X header. That allows for a write up
  * to the maximum size described by RFC1002.
  */
-#define CIFS_MAX_RFC1002_WSIZE (128 * 1024 - sizeof(WRITE_REQ) + 4)
+#define CIFS_MAX_RFC1002_WSIZE ((1<<17) - 1 - sizeof(WRITE_REQ) + 4)
 
 /*
  * The default wsize is 1M. find_get_pages seems to return a maximum of 256

@@ -562,7 +562,16 @@ int cifs_get_file_info(struct file *filp
 
 	xid = GetXid();
 	rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data);
-	if (rc == -EOPNOTSUPP || rc == -EINVAL) {
+	switch (rc) {
+	case 0:
+		cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false);
+		break;
+	case -EREMOTE:
+		cifs_create_dfs_fattr(&fattr, inode->i_sb);
+		rc = 0;
+		break;
+	case -EOPNOTSUPP:
+	case -EINVAL:
 		/*
 		 * FIXME: legacy server -- fall back to path-based call?
 		 * for now, just skip revalidating and mark inode for

@@ -570,18 +579,14 @@ int cifs_get_file_info(struct file *filp
 		 */
 		rc = 0;
 		CIFS_I(inode)->time = 0;
+	default:
 		goto cgfi_exit;
-	} else if (rc == -EREMOTE) {
-		cifs_create_dfs_fattr(&fattr, inode->i_sb);
-		rc = 0;
-	} else if (rc)
-		goto cgfi_exit;
+	}
 
 	/*
 	 * don't bother with SFU junk here -- just mark inode as needing
 	 * revalidation.
 	 */
-	cifs_all_info_to_fattr(&fattr, &find_data, cifs_sb, false);
 	fattr.cf_uniqueid = CIFS_I(inode)->uniqueid;
 	fattr.cf_flags |= CIFS_FATTR_NEED_REVAL;
 	cifs_fattr_to_inode(inode, &fattr);

@@ -4450,7 +4450,7 @@ static int __init rs_init(void)
 
 #if defined(CONFIG_ETRAX_RS485)
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
-	if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+	if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
 			rs485_pa_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");

@@ -4459,7 +4459,7 @@ static int __init rs_init(void)
 	}
 #endif
 #if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-	if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+	if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
 			rs485_port_g_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");

@@ -1872,6 +1872,7 @@ got_driver:
 		if (IS_ERR(tty)) {
 			tty_unlock();
 			mutex_unlock(&tty_mutex);
+			tty_driver_kref_put(driver);
 			return PTR_ERR(tty);
 		}
 	}

@@ -670,12 +670,18 @@ static int ptmx_open(struct inode *inode
 
 	nonseekable_open(inode, filp);
 
+	retval = tty_alloc_file(filp);
+	if (retval)
+		return retval;
+
 	/* find a device that is not in use. */
 	tty_lock();
 	index = devpts_new_index(inode);
 	tty_unlock();
-	if (index < 0)
-		return index;
+	if (index < 0) {
+		retval = index;
+		goto err_file;
+	}
 
 	mutex_lock(&tty_mutex);
 	tty_lock();

@@ -689,9 +695,7 @@ static int ptmx_open(struct inode *inode
 
 	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 
-	retval = tty_add_file(tty, filp);
-	if (retval)
-		goto out;
+	tty_add_file(tty, filp);
 
 	retval = devpts_pty_new(inode, tty->link);
 	if (retval)

@@ -710,6 +714,8 @@ out2:
 out:
 	devpts_kill_index(inode, index);
 	tty_unlock();
+err_file:
+	tty_free_file(filp);
 	return retval;
 }
 

111 lines not on this page · raw message

@@ -472,7 +472,9 @@ extern void proc_clear_tty(struct task_s
 extern struct tty_struct *get_current_tty(void);
 extern void tty_default_fops(struct file_operations *fops);
 extern struct tty_struct *alloc_tty_struct(void);
-extern int tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_alloc_file(struct file *file);
+extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern void tty_free_file(struct file *file);
 extern void free_tty_struct(struct tty_struct *tty);
 extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);

@@ -699,15 +699,15 @@ static int ptmx_open(struct inode *inode
 
 	retval = devpts_pty_new(inode, tty->link);
 	if (retval)
-		goto out1;
+		goto err_release;
 
 	retval = ptm_driver->ops->open(tty, filp);
 	if (retval)
-		goto out2;
-out1:
+		goto err_release;
+
 	tty_unlock();
-	return retval;
-out2:
+	return 0;
+err_release:
 	tty_unlock();
 	tty_release(inode, filp);
 	return retval;

@@ -1583,7 +1583,7 @@ int usb_autopm_get_interface_async(struc
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
-	if (status > 0)
+	if (status > 0 || status == -EINPROGRESS)
 		status = 0;
 	return status;
 }

@@ -24,7 +24,6 @@ static int debug;
 #define DRIVER_DESC "Quatech USB to Serial Driver"
 
 #define	USB_VENDOR_ID_QUATECH			0x061d	/* Quatech VID */
-#define QUATECH_SSU100	0xC020	/* SSU100 */
 #define QUATECH_SSU200	0xC030	/* SSU200 */
 #define QUATECH_DSU100	0xC040	/* DSU100 */
 #define QUATECH_DSU200	0xC050	/* DSU200 */

@@ -127,7 +126,6 @@ static int debug;
 #define RS232_MODE          0x00
 
 static const struct usb_device_id serqt_id_table[] = {
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)},

@@ -775,7 +773,6 @@ static int qt_startup(struct usb_serial
 	}
 
 	switch (serial->dev->descriptor.idProduct) {
-	case QUATECH_SSU100:
 	case QUATECH_DSU100:
 	case QUATECH_QSU100:
 	case QUATECH_ESU100A:

@@ -916,9 +916,10 @@ static int qt2_ioctl(struct tty_struct *
 		dbg("%s() port %d, cmd == TIOCMIWAIT enter",
 			__func__, port->number);
 		prev_msr_value = port_extra->shadowMSR  & QT2_SERIAL_MSR_MASK;
+		barrier();
+		__set_current_state(TASK_INTERRUPTIBLE);
 		while (1) {
 			add_wait_queue(&port_extra->wait, &wait);
-			set_current_state(TASK_INTERRUPTIBLE);
 			schedule();
 			dbg("%s(): port %d, cmd == TIOCMIWAIT here\n",
 				__func__, port->number);

@@ -926,9 +927,12 @@ static int qt2_ioctl(struct tty_struct *
 			/* see if a signal woke us up */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+			set_current_state(TASK_INTERRUPTIBLE);
 			msr_value = port_extra->shadowMSR & QT2_SERIAL_MSR_MASK;
-			if (msr_value == prev_msr_value)
+			if (msr_value == prev_msr_value) {
+				__set_current_state(TASK_RUNNING);
 				return -EIO;  /* no change - error */
+			}
 			if ((arg & TIOCM_RNG &&
 				((prev_msr_value & QT2_SERIAL_MSR_RI) ==
 					(msr_value & QT2_SERIAL_MSR_RI))) ||

@@ -941,6 +945,7 @@ static int qt2_ioctl(struct tty_struct *
 				(arg & TIOCM_CTS &&
 				((prev_msr_value & QT2_SERIAL_MSR_CTS) ==
 					(msr_value & QT2_SERIAL_MSR_CTS)))) {
+				__set_current_state(TASK_RUNNING);
 				return 0;
 			}
 		} /* end inifinite while */

@@ -218,6 +218,7 @@ struct vstor_packet {
 #define STORVSC_MAX_LUNS_PER_TARGET			64
 #define STORVSC_MAX_TARGETS				1
 #define STORVSC_MAX_CHANNELS				1
+#define STORVSC_MAX_CMD_LEN				16
 
 struct hv_storvsc_request;
 

@@ -729,6 +729,8 @@ static int storvsc_probe(struct hv_devic
 	host->max_id = STORVSC_MAX_TARGETS;
 	/* max # of channels */
 	host->max_channel = STORVSC_MAX_CHANNELS - 1;
+	/* max cmd length */
+	host->max_cmd_len = STORVSC_MAX_CMD_LEN;
 
 	/* Register the HBA and start the scsi bus scan */
 	ret = scsi_add_host(host, &device->device);

@@ -83,6 +83,7 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);

@@ -28,6 +28,7 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
 	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
 	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */

@@ -100,6 +100,16 @@ static inline void receive_chars(struct
 	int max_count = 256;
 
 	do {
+		/* work around Errata #20 according to
+		 * Intel(R) PXA27x Processor Family
+		 * Specification Update (May 2005)
+		 *
+		 * Step 2
+		 * Disable the Reciever Time Out Interrupt via IER[RTOEI]
+		 */
+		up->ier &= ~UART_IER_RTOIE;
+		serial_out(up, UART_IER, up->ier);
+
 		ch = serial_in(up, UART_RX);
 		flag = TTY_NORMAL;
 		up->port.icount.rx++;

@@ -156,6 +166,16 @@ static inline void receive_chars(struct
 		*status = serial_in(up, UART_LSR);
 	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
 	tty_flip_buffer_push(tty);
+
+	/* work around Errata #20 according to
+	 * Intel(R) PXA27x Processor Family
+	 * Specification Update (May 2005)
+	 *
+	 * Step 6:
+	 * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
+	 */
+	up->ier |= UART_IER_RTOIE;
+	serial_out(up, UART_IER, up->ier);
 }
 
 static void transmit_chars(struct uart_pxa_port *up)

@@ -2003,6 +2003,8 @@ int uart_resume_port(struct uart_driver
 		if (port->tty && port->tty->termios && termios.c_cflag == 0)
 			termios = *(port->tty->termios);
 
+		if (console_suspend_enabled)
+			uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
 		if (console_suspend_enabled)
 			console_start(uport->cons);

@@ -761,6 +761,35 @@ static int ehci_run (struct usb_hcd *hcd
 	return 0;
 }
 
+static int __maybe_unused ehci_setup (struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->regs = (void __iomem *)ehci->caps +
+	    HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci->sbrn = HCD_USB2;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return 0;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static irqreturn_t ehci_irq (struct usb_hcd *hcd)

@@ -178,7 +178,7 @@ struct usb_hcd {
 	 * this structure.
 	 */
 	unsigned long hcd_priv[0]
-			__attribute__ ((aligned(sizeof(unsigned long))));
+			__attribute__ ((aligned(sizeof(s64))));
 };
 
 /* 2.4 does this a bit differently ... */

@@ -808,7 +808,7 @@ static ssize_t fill_registers_buffer(str
 	next += temp;
 
 	temp = scnprintf (next, size, "uframe %04x\n",
-			ehci_readl(ehci, &ehci->regs->frame_index));
+			ehci_read_frame_index(ehci));
 	size -= temp;
 	next += temp;
 

@@ -1188,8 +1188,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd,
 static int ehci_get_frame (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
-	return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
-		ehci->periodic_size;
+	return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
 }
 
 /*-------------------------------------------------------------------------*/

@@ -224,6 +224,11 @@ static int ehci_pci_setup(struct usb_hcd
 			pci_dev_put(p_smbus);
 		}
 		break;
+	case PCI_VENDOR_ID_NETMOS:
+		/* MosChip frame-index-register bug */
+		ehci_info(ehci, "applying MosChip frame-index workaround\n");
+		ehci->frame_index_bug = 1;
+		break;
 	}
 
 	/* optional debug port, normally in the first BAR */

@@ -36,6 +36,27 @@
 
 static int ehci_get_frame (struct usb_hcd *hcd);
 
+#ifdef CONFIG_PCI
+
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	unsigned uf;
+
+	/*
+	 * The MosChip MCS9990 controller updates its microframe counter
+	 * a little before the frame counter, and occasionally we will read
+	 * the invalid intermediate value.  Avoid problems by checking the
+	 * microframe number (the low-order 3 bits); if they are 0 then
+	 * re-read the register to get the correct value.
+	 */
+	uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0)))
+		uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	return uf;
+}
+
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 /*

@@ -482,7 +503,7 @@ static int enable_periodic (struct ehci_
 	ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 
 	/* make sure ehci_work scans these */
-	ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
+	ehci->next_uframe = ehci_read_frame_index(ehci)
 		% (ehci->periodic_size << 3);
 	if (unlikely(ehci->broken_periodic))
 		ehci->last_periodic_enable = ktime_get_real();

@@ -1412,7 +1433,7 @@ iso_stream_schedule (
 		goto fail;
 	}
 
-	now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
+	now = ehci_read_frame_index(ehci) & (mod - 1);
 
 	/* Typical case: reuse current schedule, stream is still active.
 	 * Hopefully there are no gaps from the host falling behind

@@ -2279,7 +2300,7 @@ scan_periodic (struct ehci_hcd *ehci)
 	 */
 	now_uframe = ehci->next_uframe;
 	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
-		clock = ehci_readl(ehci, &ehci->regs->frame_index);
+		clock = ehci_read_frame_index(ehci);
 		clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
 	} else  {
 		clock = now_uframe + mod - 1;

@@ -2458,8 +2479,7 @@ restart:
 					|| ehci->periodic_sched == 0)
 				break;
 			ehci->next_uframe = now_uframe;
-			now = ehci_readl(ehci, &ehci->regs->frame_index) &
-					(mod - 1);
+			now = ehci_read_frame_index(ehci) & (mod - 1);
 			if (now_uframe == now)
 				break;
 

@@ -137,6 +137,7 @@ struct ehci_hcd {			/* one per controlle
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)

@@ -735,6 +736,22 @@ static inline u32 hc32_to_cpup (const st
 }
 
 #endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PCI
+
+/* For working around the MosChip frame-index-register bug */
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
+
+#else
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#endif
 
 /*-------------------------------------------------------------------------*/
 

@@ -112,18 +112,20 @@ void xhci_ring_free(struct xhci_hcd *xhc
 	struct xhci_segment *seg;
 	struct xhci_segment *first_seg;
 
-	if (!ring || !ring->first_seg)
+	if (!ring)
 		return;
-	first_seg = ring->first_seg;
-	seg = first_seg->next;
-	xhci_dbg(xhci, "Freeing ring at %p\n", ring);
-	while (seg != first_seg) {
-		struct xhci_segment *next = seg->next;
-		xhci_segment_free(xhci, seg);
-		seg = next;
+	if (ring->first_seg) {
+		first_seg = ring->first_seg;
+		seg = first_seg->next;
+		xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+		while (seg != first_seg) {
+			struct xhci_segment *next = seg->next;
+			xhci_segment_free(xhci, seg);
+			seg = next;
+		}
+		xhci_segment_free(xhci, first_seg);
+		ring->first_seg = NULL;
 	}
-	xhci_segment_free(xhci, first_seg);
-	ring->first_seg = NULL;
 	kfree(ring);
 }
 

@@ -81,7 +81,7 @@ static void xhci_segment_free(struct xhc
  * related flags, such as End TRB, Toggle Cycle, and no snoop.
  */
 static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
-		struct xhci_segment *next, bool link_trbs)
+		struct xhci_segment *next, bool link_trbs, bool isoc)
 {
 	u32 val;
 

@@ -97,7 +97,9 @@ static void xhci_link_segments(struct xh
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
 		/* Always set the chain bit with 0.95 hardware */
-		if (xhci_link_trb_quirk(xhci))
+		/* Set chain bit for isoc rings on AMD 0.96 host */
+		if (xhci_link_trb_quirk(xhci) ||
+				(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)))
 			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
 	}

@@ -154,7 +156,7 @@ static void xhci_initialize_ring_info(st
  * See section 4.9.1 and figures 15 and 16.
  */
 static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
-		unsigned int num_segs, bool link_trbs, gfp_t flags)
+		unsigned int num_segs, bool link_trbs, bool isoc, gfp_t flags)
 {
 	struct xhci_ring	*ring;
 	struct xhci_segment	*prev;

@@ -180,12 +182,12 @@ static struct xhci_ring *xhci_ring_alloc
 		next = xhci_segment_alloc(xhci, flags);
 		if (!next)
 			goto fail;
-		xhci_link_segments(xhci, prev, next, link_trbs);
+		xhci_link_segments(xhci, prev, next, link_trbs, isoc);
 
 		prev = next;
 		num_segs--;
 	}
-	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs, isoc);
 
 	if (link_trbs) {
 		/* See section 4.9.2.1 and 6.4.4.1 */

@@ -231,14 +233,14 @@ void xhci_free_or_cache_endpoint_ring(st
  * pointers to the beginning of the ring.
  */
 static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
-		struct xhci_ring *ring)
+		struct xhci_ring *ring, bool isoc)
 {
 	struct xhci_segment	*seg = ring->first_seg;
 	do {
 		memset(seg->trbs, 0,
 				sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
 		/* All endpoint rings have link TRBs */
-		xhci_link_segments(xhci, seg, seg->next, 1);
+		xhci_link_segments(xhci, seg, seg->next, 1, isoc);
 		seg = seg->next;
 	} while (seg != ring->first_seg);
 	xhci_initialize_ring_info(ring);

@@ -542,7 +544,7 @@ struct xhci_stream_info *xhci_alloc_stre
 	 */
 	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
 		stream_info->stream_rings[cur_stream] =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (!cur_ring)
 			goto cleanup_rings;

@@ -767,7 +769,7 @@ int xhci_alloc_virt_device(struct xhci_h
 	}
 
 	/* Allocate endpoint 0 ring */
-	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags);
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!dev->eps[0].ring)
 		goto fail;
 

@@ -1177,10 +1179,10 @@ int xhci_endpoint_init(struct xhci_hcd *
 	 */
 	if (usb_endpoint_xfer_isoc(&ep->desc))
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 8, true, mem_flags);
+			xhci_ring_alloc(xhci, 8, true, true, mem_flags);
 	else
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 	if (!virt_dev->eps[ep_index].new_ring) {
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)

@@ -1189,7 +1191,8 @@ int xhci_endpoint_init(struct xhci_hcd *
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
 		virt_dev->num_rings_cached--;
-		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
+		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
+			usb_endpoint_xfer_isoc(&ep->desc) ? true : false);
 	}
 	virt_dev->eps[ep_index].skip = false;
 	ep_ring = virt_dev->eps[ep_index].new_ring;

@@ -2003,7 +2006,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
 		goto fail;
 
 	/* Set up the command ring to have one segments for now. */
-	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);

@@ -2034,7 +2037,8 @@ int xhci_mem_init(struct xhci_hcd *xhci,
 	 * the event ring segment table (ERST).  Section 4.9.3.
 	 */
 	xhci_dbg(xhci, "// Allocating event ring\n");
-	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, false,
+						flags);
 	if (!xhci->event_ring)
 		goto fail;
 	if (xhci_check_trb_in_td_math(xhci, flags) < 0)

@@ -128,6 +128,9 @@ static int xhci_pci_setup(struct usb_hcd
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;

183 lines not on this page · raw message

@@ -1311,6 +1311,7 @@ struct xhci_hcd {
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
 #define XHCI_RESET_ON_RESUME	(1 << 7)
+#define XHCI_AMD_0x96_HOST	(1 << 9)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

@@ -1658,6 +1658,31 @@ g4x_dp_detect(struct intel_dp *intel_dp)
 	return status;
 }
 
+static struct edid *
+intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct edid	*edid;
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	edid = drm_get_edid(connector, adapter);
+	ironlake_edp_panel_vdd_off(intel_dp);
+	return edid;
+}
+
+static int
+intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	int	ret;
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	ret = intel_ddc_get_modes(connector, adapter);
+	ironlake_edp_panel_vdd_off(intel_dp);
+	return ret;
+}
+
+
 /**
  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
  *

@@ -1684,7 +1709,7 @@ intel_dp_detect(struct drm_connector *co
 	if (intel_dp->force_audio) {
 		intel_dp->has_audio = intel_dp->force_audio > 0;
 	} else {
-		edid = drm_get_edid(connector, &intel_dp->adapter);
+		edid = intel_dp_get_edid(connector, &intel_dp->adapter);
 		if (edid) {
 			intel_dp->has_audio = drm_detect_monitor_audio(edid);
 			connector->display_info.raw_edid = NULL;

@@ -1705,7 +1730,7 @@ static int intel_dp_get_modes(struct drm
 	/* We should parse the EDID data and find out if it has an audio sink
 	 */
 
-	ret = intel_ddc_get_modes(connector, &intel_dp->adapter);
+	ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
 	if (ret) {
 		if (is_edp(intel_dp) && !dev_priv->panel_fixed_mode) {
 			struct drm_display_mode *newmode;

@@ -1741,7 +1766,7 @@ intel_dp_detect_audio(struct drm_connect
 	struct edid *edid;
 	bool has_audio = false;
 
-	edid = drm_get_edid(connector, &intel_dp->adapter);
+	edid = intel_dp_get_edid(connector, &intel_dp->adapter);
 	if (edid) {
 		has_audio = drm_detect_monitor_audio(edid);
 

@@ -226,7 +226,7 @@ static void intel_pch_panel_set_backligh
 	I915_WRITE(BLC_PWM_CPU_CTL, val | level);
 }
 
-void intel_panel_set_backlight(struct drm_device *dev, u32 level)
+static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 tmp;

@@ -254,16 +254,21 @@ void intel_panel_set_backlight(struct dr
 	I915_WRITE(BLC_PWM_CTL, tmp | level);
 }
 
-void intel_panel_disable_backlight(struct drm_device *dev)
+void intel_panel_set_backlight(struct drm_device *dev, u32 level)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (dev_priv->backlight_enabled) {
-		dev_priv->backlight_level = intel_panel_get_backlight(dev);
-		dev_priv->backlight_enabled = false;
-	}
+	dev_priv->backlight_level = level;
+	if (dev_priv->backlight_enabled)
+		intel_panel_actually_set_backlight(dev, level);
+}
+
+void intel_panel_disable_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	intel_panel_set_backlight(dev, 0);
+	dev_priv->backlight_enabled = false;
+	intel_panel_actually_set_backlight(dev, 0);
 }
 
 void intel_panel_enable_backlight(struct drm_device *dev)

@@ -273,8 +278,8 @@ void intel_panel_enable_backlight(struct
 	if (dev_priv->backlight_level == 0)
 		dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
 
-	intel_panel_set_backlight(dev, dev_priv->backlight_level);
 	dev_priv->backlight_enabled = true;
+	intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
 }
 
 void intel_panel_setup_backlight(struct drm_device *dev)

@@ -950,6 +950,11 @@ radeon_dvi_detect(struct drm_connector *
 	if ((ret == connector_status_connected) && (radeon_connector->use_digital == true))
 		goto out;
 
+	/* DVI-D and HDMI-A are digital only */
+	if ((connector->connector_type == DRM_MODE_CONNECTOR_DVID) ||
+	    (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA))
+		goto out;
+
 	if (!force) {
 		ret = connector->status;
 		goto out;

@@ -715,6 +715,7 @@ radeon_vga_detect(struct drm_connector *
 		dret = radeon_ddc_probe(radeon_connector,
 					radeon_connector->requires_extended_probe);
 	if (dret) {
+		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
 			kfree(radeon_connector->edid);
 			radeon_connector->edid = NULL;

@@ -741,12 +742,21 @@ radeon_vga_detect(struct drm_connector *
 	} else {
 
 		/* if we aren't forcing don't do destructive polling */
-		if (!force)
-			return connector->status;
+		if (!force) {
+			/* only return the previous status if we last
+			 * detected a monitor via load.
+			 */
+			if (radeon_connector->detected_by_load)
+				return connector->status;
+			else
+				return ret;
+		}
 
 		if (radeon_connector->dac_load_detect && encoder) {
 			encoder_funcs = encoder->helper_private;
 			ret = encoder_funcs->detect(encoder, connector);
+			if (ret == connector_status_connected)
+				radeon_connector->detected_by_load = true;
 		}
 	}
 

@@ -888,6 +898,7 @@ radeon_dvi_detect(struct drm_connector *
 		dret = radeon_ddc_probe(radeon_connector,
 					radeon_connector->requires_extended_probe);
 	if (dret) {
+		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
 			kfree(radeon_connector->edid);
 			radeon_connector->edid = NULL;

@@ -955,8 +966,13 @@ radeon_dvi_detect(struct drm_connector *
 	    (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA))
 		goto out;
 
+	/* if we aren't forcing don't do destructive polling */
 	if (!force) {
-		ret = connector->status;
+		/* only return the previous status if we last
+		 * detected a monitor via load.
+		 */
+		if (radeon_connector->detected_by_load)
+			ret = connector->status;
 		goto out;
 	}
 

@@ -980,6 +996,7 @@ radeon_dvi_detect(struct drm_connector *
 					ret = encoder_funcs->detect(encoder, connector);
 					if (ret == connector_status_connected) {
 						radeon_connector->use_digital = false;
+						radeon_connector->detected_by_load = true;
 					}
 				}
 				break;

@@ -447,6 +447,7 @@ struct radeon_connector {
 	struct edid *edid;
 	void *con_priv;
 	bool dac_load_detect;
+	bool detected_by_load; /* if the connection status was determined by load */
 	uint16_t connector_object_id;
 	struct radeon_hpd hpd;
 	struct radeon_router router;

@@ -620,8 +620,8 @@ static struct radeon_i2c_bus_rec combios
 		i2c.y_data_mask = 0x80;
 	} else {
 		/* default masks for ddc pads */
-		i2c.mask_clk_mask = RADEON_GPIO_EN_1;
-		i2c.mask_data_mask = RADEON_GPIO_EN_0;
+		i2c.mask_clk_mask = RADEON_GPIO_MASK_1;
+		i2c.mask_data_mask = RADEON_GPIO_MASK_0;
 		i2c.a_clk_mask = RADEON_GPIO_A_1;
 		i2c.a_data_mask = RADEON_GPIO_A_0;
 		i2c.en_clk_mask = RADEON_GPIO_EN_1;

@@ -1057,7 +1057,7 @@ static void mmc_power_up(struct mmc_host
 	mmc_host_clk_release(host);
 }
 
-static void mmc_power_off(struct mmc_host *host)
+void mmc_power_off(struct mmc_host *host)
 {
 	mmc_host_clk_hold(host);
 

@@ -1147,8 +1147,7 @@ void mmc_attach_bus(struct mmc_host *hos
 }
 
 /*
- * Remove the current bus handler from a host. Assumes that there are
- * no interesting cards left, so the bus is powered down.
+ * Remove the current bus handler from a host.
  */
 void mmc_detach_bus(struct mmc_host *host)
 {

@@ -1165,8 +1164,6 @@ void mmc_detach_bus(struct mmc_host *hos
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	mmc_power_off(host);
-
 	mmc_bus_put(host);
 }
 

@@ -1675,6 +1672,7 @@ void mmc_stop_host(struct mmc_host *host
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
+		mmc_power_off(host);
 		mmc_release_host(host);
 		mmc_bus_put(host);
 		return;

@@ -1796,6 +1794,7 @@ int mmc_suspend_host(struct mmc_host *ho
 				host->bus_ops->remove(host);
 			mmc_claim_host(host);
 			mmc_detach_bus(host);
+			mmc_power_off(host);
 			mmc_release_host(host);
 			host->pm_flags = 0;
 			err = 0;

@@ -1883,6 +1882,7 @@ int mmc_pm_notify(struct notifier_block
 			host->bus_ops->remove(host);
 
 		mmc_detach_bus(host);
+		mmc_power_off(host);
 		mmc_release_host(host);
 		host->pm_flags = 0;
 		break;

@@ -43,6 +43,7 @@ int mmc_set_signal_voltage(struct mmc_ho
 			   bool cmd11);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
+void mmc_power_off(struct mmc_host *host);
 
 static inline void mmc_delay(unsigned int ms)
 {

@@ -891,6 +891,7 @@ static void mmc_detect(struct mmc_host *
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
+		mmc_power_off(host);
 		mmc_release_host(host);
 	}
 }

@@ -1008,6 +1008,7 @@ static void mmc_sd_detect(struct mmc_hos
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
+		mmc_power_off(host);
 		mmc_release_host(host);
 	}
 }

@@ -597,6 +597,7 @@ out:
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
+		mmc_power_off(host);
 		mmc_release_host(host);
 	}
 }

@@ -359,6 +359,7 @@ static int mmc_read_ext_csd(struct mmc_c
 		 * card has the Enhanced area enabled.  If so, export enhanced
 		 * area offset and size to user by adding sysfs interface.
 		 */
+		card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 		if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
 		    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
 			u8 hc_erase_grp_sz =

@@ -405,6 +406,7 @@ static int mmc_read_ext_csd(struct mmc_c
 	if (card->ext_csd.rev >= 5)
 		card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
 
+	card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT];
 	if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
 		card->erased_byte = 0xFF;
 	else

@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struc
 	/* disable must be done via function #0 */
 	if (PCI_FUNC(dev->devfn))
 		return;
-
-	pci_read_config_byte(dev, 0xCB, &disable);
-
-	if (disable & 0x02)
-		return;
-
-	pci_read_config_byte(dev, 0xCA, &write_enable);
-	pci_write_config_byte(dev, 0xCA, 0x57);
-	pci_write_config_byte(dev, 0xCB, disable | 0x02);
-	pci_write_config_byte(dev, 0xCA, write_enable);
-
-	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
-	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
 	/*
 	 * RICOH 0xe823 SD/MMC card reader fails to recognize
 	 * certain types of SD/MMC cards. Lowering the SD base

@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struc
 
 		dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
 	}
+
+	pci_read_config_byte(dev, 0xCB, &disable);
+
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0xCA, &write_enable);
+	pci_write_config_byte(dev, 0xCA, 0x57);
+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
+	pci_write_config_byte(dev, 0xCA, write_enable);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);

@@ -1906,7 +1906,6 @@ static int megasas_generic_reset(struct
 static enum
 blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
 {
-	struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
 	struct megasas_instance *instance;
 	unsigned long flags;
 

@@ -1915,7 +1914,7 @@ blk_eh_timer_return megasas_reset_timer(
 		return BLK_EH_NOT_HANDLED;
 	}
 
-	instance = cmd->instance;
+	instance = (struct megasas_instance *)scmd->device->host->hostdata;
 	if (!(instance->flag & MEGASAS_FW_BUSY)) {
 		/* FW is busy, throttle IO */
 		spin_lock_irqsave(instance->host->host_lock, flags);

@@ -8812,7 +8812,7 @@ static int __devinit ipr_probe_ioa(struc
 	uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg32);
 	if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
 		ioa_cfg->needs_hard_reset = 1;
-	if (interrupts & IPR_PCII_ERROR_INTERRUPTS)
+	if ((interrupts & IPR_PCII_ERROR_INTERRUPTS) || reset_devices)
 		ioa_cfg->needs_hard_reset = 1;
 	if (interrupts & IPR_PCII_IOA_UNIT_CHECKED)
 		ioa_cfg->ioa_unit_checked = 1;

@@ -199,6 +199,8 @@ static void sas_set_ex_phy(struct domain
 	phy->virtual = dr->virtual;
 	phy->last_da_index = -1;
 
+	phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
+	phy->phy->identify.device_type = phy->attached_dev_type;
 	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 	phy->phy->identify.target_port_protocols = phy->attached_tproto;
 	phy->phy->identify.phy_identifier = phy_id;

@@ -97,7 +97,7 @@
 #define SCU_MAX_COMPLETION_QUEUE_SHIFT	  (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES))
 
 #define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
-#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE   (1024)
+#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE   (1024U)
 #define SCU_INVALID_FRAME_INDEX             (0xFFFF)
 
 #define SCU_IO_REQUEST_MAX_SGE_SIZE         (0x00FFFFFF)

79 lines not on this page · raw message

@@ -174,9 +174,6 @@ struct isci_request {
 			};
 		} ssp;
 		struct {
-			struct smp_resp rsp;
-		} smp;
-		struct {
 			struct isci_stp_request req;
 			struct host_to_dev_fis cmd;
 			struct dev_to_host_fis rsp;

@@ -204,8 +204,6 @@ struct smp_req {
 	u8 req_data[0];
 }  __packed;
 
-#define SMP_RESP_HDR_SZ	4
-
 /*
  * struct sci_sas_address - This structure depicts how a SAS address is
  *    represented by SCI.

@@ -678,7 +678,7 @@ static void apc_agent_timeout(unsigned l
 	configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
 
 	if (!configure_phy_mask)
-		return;
+		goto done;
 
 	for (index = 0; index < SCI_MAX_PHYS; index++) {
 		if ((configure_phy_mask & (1 << index)) == 0)

@@ -5425,9 +5425,7 @@ static void stac92hd8x_fill_auto_spec(st
 static int patch_stac92hd83xxx(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
-	hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
 	int err;
-	int num_dacs;
 
 	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)

@@ -5522,22 +5520,6 @@ again:
 		return err;
 	}
 
-	/* docking output support */
-	num_dacs = snd_hda_get_connections(codec, 0xF,
-				conn, STAC92HD83_DAC_COUNT + 1) - 1;
-	/* skip non-DAC connections */
-	while (num_dacs >= 0 &&
-			(get_wcaps_type(get_wcaps(codec, conn[num_dacs]))
-					!= AC_WID_AUD_OUT))
-		num_dacs--;
-	/* set port E and F to select the last DAC */
-	if (num_dacs >= 0) {
-		snd_hda_codec_write_cache(codec, 0xE, 0,
-			AC_VERB_SET_CONNECT_SEL, num_dacs);
-		snd_hda_codec_write_cache(codec, 0xF, 0,
-			AC_VERB_SET_CONNECT_SEL, num_dacs);
-	}
-
 	codec->proc_widget_hook = stac92hd_proc_hook;
 
 	return 0;

@@ -20126,6 +20126,8 @@ static const struct hda_codec_preset snd
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
 	  .patch = patch_alc662 },
+	{ .id = 0x10ec0662, .rev = 0x100300, .name = "ALC662 rev3",
+	  .patch = patch_alc662 },
 	{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
 	{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
 	{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },

@@ -60,11 +60,31 @@ int core_emulate_report_target_port_grou
 	unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf;
 	u32 rd_len = 0, off = 4; /* Skip over RESERVED area to first
 				    Target port group descriptor */
+	/*
+	 * Need at least 4 bytes of response data or else we can't
+	 * even fit the return data length.
+	 */
+	if (cmd->data_length < 4) {
+		pr_warn("REPORT TARGET PORT GROUPS allocation length %u"
+			" too small\n", cmd->data_length);
+		return -EINVAL;
+	}
 
 	spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock);
 	list_for_each_entry(tg_pt_gp, &T10_ALUA(su_dev)->tg_pt_gps_list,
 			tg_pt_gp_list) {
 		/*
+		 * Check if the Target port group and Target port descriptor list
+		 * based on tg_pt_gp_members count will fit into the response payload.
+		 * Otherwise, bump rd_len to let the initiator know we have exceeded
+		 * the allocation length and the response is truncated.
+		 */
+		if ((off + 8 + (tg_pt_gp->tg_pt_gp_members * 4)) >
+		     cmd->data_length) {
+			rd_len += 8 + (tg_pt_gp->tg_pt_gp_members * 4);
+			continue;
+		}
+		/*
 		 * PREF: Preferred target port bit, determine if this
 		 * bit should be set for port group.
 		 */

@@ -55,6 +55,7 @@
 #define UV_BAU_TUNABLES_DIR		"sgi_uv"
 #define UV_BAU_TUNABLES_FILE		"bau_tunables"
 #define WHITESPACE			" \t\n"
+#define uv_mmask			((1UL << uv_hub_info->m_val) - 1)
 #define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
 #define cpubit_isset(cpu, bau_local_cpumask) \
 	test_bit((cpu), (bau_local_cpumask).bits)

@@ -46,6 +46,13 @@
  *	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
  *		  of the nasid for socket usage.
  *
+ *	GPA	- (global physical address) a socket physical address converted
+ *		  so that it can be used by the GRU as a global address. Socket
+ *		  physical addresses 1) need additional NASID (node) bits added
+ *		  to the high end of the address, and 2) unaliased if the
+ *		  partition does not have a physical address 0. In addition, on
+ *		  UV2 rev 1, GPAs need the gnode left shifted to bits 39 or 40.
+ *
  *
  *  NumaLink Global Physical Address Format:
  *  +--------------------------------+---------------------+

@@ -141,6 +148,8 @@ struct uv_hub_info_s {
 	unsigned int		gnode_extra;
 	unsigned char		hub_revision;
 	unsigned char		apic_pnode_shift;
+	unsigned char		m_shift;
+	unsigned char		n_lshift;
 	unsigned long		gnode_upper;
 	unsigned long		lowmem_remap_top;
 	unsigned long		lowmem_remap_base;

@@ -177,6 +186,16 @@ static inline int is_uv2_hub(void)
 	return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE;
 }
 
+static inline int is_uv2_1_hub(void)
+{
+	return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE;
+}
+
+static inline int is_uv2_2_hub(void)
+{
+	return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE + 1;
+}
+
 union uvh_apicid {
     unsigned long       v;
     struct uvh_apicid_s {

@@ -276,7 +295,10 @@ static inline unsigned long uv_soc_phys_
 {
 	if (paddr < uv_hub_info->lowmem_remap_top)
 		paddr |= uv_hub_info->lowmem_remap_base;
-	return paddr | uv_hub_info->gnode_upper;
+	paddr |= uv_hub_info->gnode_upper;
+	paddr = ((paddr << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
+		((paddr >> uv_hub_info->m_val) << uv_hub_info->n_lshift);
+	return paddr;
 }
 
 

@@ -300,16 +322,19 @@ static inline unsigned long uv_gpa_to_so
 	unsigned long remap_base = uv_hub_info->lowmem_remap_base;
 	unsigned long remap_top =  uv_hub_info->lowmem_remap_top;
 
+	gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
+		((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val);
+	gpa = gpa & uv_hub_info->gpa_mask;
 	if (paddr >= remap_base && paddr < remap_base + remap_top)
 		paddr -= remap_base;
 	return paddr;
 }
 
 
-/* gnode -> pnode */
+/* gpa -> pnode */
 static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
 {
-	return gpa >> uv_hub_info->m_val;
+	return gpa >> uv_hub_info->n_lshift;
 }
 
 /* gpa -> pnode */

@@ -320,6 +345,12 @@ static inline int uv_gpa_to_pnode(unsign
 	return uv_gpa_to_gnode(gpa) & n_mask;
 }
 
+/* gpa -> node offset*/
+static inline unsigned long uv_gpa_to_offset(unsigned long gpa)
+{
+	return (gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift;
+}
+
 /* pnode, offset --> socket virtual */
 static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
 {

@@ -832,6 +832,10 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
 		uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision;
 
+		uv_cpu_hub_info(cpu)->m_shift = 64 - m_val;
+		uv_cpu_hub_info(cpu)->n_lshift = is_uv2_1_hub() ?
+				(m_val == 40 ? 40 : 39) : m_val;
+
 		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
 		lcpu = uv_blade_info[blade].nr_possible_cpus;

@@ -862,8 +866,7 @@ void __init uv_system_init(void)
 		if (uv_node_to_blade[nid] >= 0)
 			continue;
 		paddr = node_start_pfn(nid) << PAGE_SHIFT;
-		paddr = uv_soc_phys_ram_to_gpa(paddr);
-		pnode = (paddr >> m_val) & pnode_mask;
+		pnode = uv_gpa_to_pnode(uv_soc_phys_ram_to_gpa(paddr));
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
 	}

@@ -115,9 +115,6 @@ early_param("nobau", setup_nobau);
 
 /* base pnode in this partition */
 static int uv_base_pnode __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
-static unsigned long uv_mmask __read_mostly;
 
 static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
 static DEFINE_PER_CPU(struct bau_control, bau_control);

@@ -1426,7 +1423,7 @@ static void activation_descriptor_init(i
 {
 	int i;
 	int cpu;
-	unsigned long pa;
+	unsigned long gpa;
 	unsigned long m;
 	unsigned long n;
 	size_t dsize;

@@ -1442,9 +1439,9 @@ static void activation_descriptor_init(i
 	bau_desc = kmalloc_node(dsize, GFP_KERNEL, node);
 	BUG_ON(!bau_desc);
 
-	pa = uv_gpa(bau_desc); /* need the real nasid*/
-	n = pa >> uv_nshift;
-	m = pa & uv_mmask;
+	gpa = uv_gpa(bau_desc);
+	n = uv_gpa_to_gnode(gpa);
+	m = uv_gpa_to_offset(gpa);
 
 	/* the 14-bit pnode */
 	write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m));

@@ -1516,9 +1513,9 @@ static void pq_init(int node, int pnode)
 		bcp->queue_last		= pqp + (DEST_Q_SIZE - 1);
 	}
 	/*
-	 * need the pnode of where the memory was really allocated
+	 * need the gnode of where the memory was really allocated
 	 */
-	pn = uv_gpa(pqp) >> uv_nshift;
+	pn = uv_gpa_to_gnode(uv_gpa(pqp));
 	first = uv_physnodeaddr(pqp);
 	pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first;
 	last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1));

@@ -1812,8 +1809,6 @@ static int __init uv_bau_init(void)
 		zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
 	}
 
-	uv_nshift = uv_hub_info->m_val;
-	uv_mmask = (1UL << uv_hub_info->m_val) - 1;
 	nuvhubs = uv_num_possible_blades();
 	spin_lock_init(&disable_lock);
 	congested_cycles = usec_2_cycles(congested_respns_us);

@@ -75,8 +75,10 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kpr
 	/*
 	 * Undefined/reserved opcodes, conditional jump, Opcode Extension
 	 * Groups, and some special opcodes can not boost.
+	 * This is non-const to keep gcc from statically optimizing it out, as
+	 * variable_test_bit makes gcc think only *(unsigned long*) is used.
 	 */
-static const u32 twobyte_is_boostable[256 / 32] = {
+static u32 twobyte_is_boostable[256 / 32] = {
 	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
 	/*      ----------------------------------------------          */
 	W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */

@@ -70,6 +70,15 @@
  * simultaneous inserts (A into B and B into A) from racing and
  * constructing a cycle without either insert observing that it is
  * going to.
+ * It is necessary to acquire multiple "ep->mtx"es at once in the
+ * case when one epoll fd is added to another. In this case, we
+ * always acquire the locks in the order of nesting (i.e. after
+ * epoll_ctl(e1, EPOLL_CTL_ADD, e2), e1->mtx will always be acquired
+ * before e2->mtx). Since we disallow cycles of epoll file
+ * descriptors, this ensures that the mutexes are well-ordered. In
+ * order to communicate this nesting to lockdep, when walking a tree
+ * of epoll file descriptors, we use the current recursion depth as
+ * the lockdep subkey.
  * It is possible to drop the "ep->mtx" and to use the global
  * mutex "epmutex" (together with "ep->lock") to have it working,
  * but having "ep->mtx" will make the interface more scalable.

@@ -464,13 +473,15 @@ static void ep_unregister_pollwait(struc
  * @ep: Pointer to the epoll private data structure.
  * @sproc: Pointer to the scan callback.
  * @priv: Private opaque data passed to the @sproc callback.
+ * @depth: The current depth of recursive f_op->poll calls.
  *
  * Returns: The same integer error code returned by the @sproc callback.
  */
 static int ep_scan_ready_list(struct eventpoll *ep,
 			      int (*sproc)(struct eventpoll *,
 					   struct list_head *, void *),
-			      void *priv)
+			      void *priv,
+			      int depth)
 {
 	int error, pwake = 0;
 	unsigned long flags;

@@ -481,7 +492,7 @@ static int ep_scan_ready_list(struct eve
 	 * We need to lock this because we could be hit by
 	 * eventpoll_release_file() and epoll_ctl().
 	 */
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, depth);
 
 	/*
 	 * Steal the ready list, and re-init the original one to the

@@ -670,7 +681,7 @@ static int ep_read_events_proc(struct ev
 
 static int ep_poll_readyevents_proc(void *priv, void *cookie, int call_nests)
 {
-	return ep_scan_ready_list(priv, ep_read_events_proc, NULL);
+	return ep_scan_ready_list(priv, ep_read_events_proc, NULL, call_nests + 1);
 }
 
 static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)

@@ -737,7 +748,7 @@ void eventpoll_release_file(struct file
 
 		ep = epi->ep;
 		list_del_init(&epi->fllink);
-		mutex_lock(&ep->mtx);
+		mutex_lock_nested(&ep->mtx, 0);
 		ep_remove(ep, epi);
 		mutex_unlock(&ep->mtx);
 	}

@@ -1134,7 +1145,7 @@ static int ep_send_events(struct eventpo
 	esed.maxevents = maxevents;
 	esed.events = events;
 
-	return ep_scan_ready_list(ep, ep_send_events_proc, &esed);
+	return ep_scan_ready_list(ep, ep_send_events_proc, &esed, 0);
 }
 
 static inline struct timespec ep_set_mstimeout(long ms)

@@ -1267,7 +1278,7 @@ static int ep_loop_check_proc(void *priv
 	struct rb_node *rbp;
 	struct epitem *epi;
 
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, call_nests + 1);
 	for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
 		epi = rb_entry(rbp, struct epitem, rbn);
 		if (unlikely(is_file_epoll(epi->ffd.file))) {

@@ -1409,7 +1420,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 	}
 
 
-	mutex_lock(&ep->mtx);
+	mutex_lock_nested(&ep->mtx, 0);
 
 	/*
 	 * Try to lookup the file inside our RB tree, Since we grabbed "mtx"

@@ -268,8 +268,11 @@ void led_blink_set(struct led_classdev *
 		   unsigned long *delay_off)
 {
 	if (led_cdev->blink_set &&
-	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
+	    !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
+		led_cdev->blink_delay_on = *delay_on;
+		led_cdev->blink_delay_off = *delay_off;
 		return;
+	}
 
 	/* blink with 1 Hz as default if nothing specified */
 	if (!*delay_on && !*delay_off)

@@ -267,6 +267,8 @@ void led_blink_set(struct led_classdev *
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
+	del_timer_sync(&led_cdev->blink_timer);
+
 	if (led_cdev->blink_set &&
 	    !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
 		led_cdev->blink_delay_on = *delay_on;

@@ -1101,7 +1101,7 @@ static long mon_bin_ioctl(struct file *f
 		nevents = mon_bin_queued(rp);
 
 		sp = (struct mon_bin_stats __user *)arg;
-		if (put_user(rp->cnt_lost, &sp->dropped))
+		if (put_user(ndropped, &sp->dropped))
 			return -EFAULT;
 		if (put_user(nevents, &sp->queued))
 			return -EFAULT;

@@ -691,6 +691,9 @@ void usb_stor_invoke_transport(struct sc
 		int temp_result;
 		struct scsi_eh_save ses;
 		int sense_size = US_SENSE_SIZE;
+		struct scsi_sense_hdr sshdr;
+		const u8 *scdd;
+		u8 fm_ili;
 
 		/* device supports and needs bigger sense buffer */
 		if (us->fflags & US_FL_SANE_SENSE)

@@ -774,32 +777,30 @@ Retry_Sense:
 			srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
 		}
 
+		scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				     &sshdr);
+
 		US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
 		US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
-			  srb->sense_buffer[0],
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+			  sshdr.response_code, sshdr.sense_key,
+			  sshdr.asc, sshdr.ascq);
 #ifdef CONFIG_USB_STORAGE_DEBUG
-		usb_stor_show_sense(
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+		usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq);
 #endif
 
 		/* set the result so the higher layers expect this data */
 		srb->result = SAM_STAT_CHECK_CONDITION;
 
+		scdd = scsi_sense_desc_find(srb->sense_buffer,
+					    SCSI_SENSE_BUFFERSIZE, 4);
+		fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
 		/* We often get empty sense data.  This could indicate that
 		 * everything worked or that there was an unspecified
 		 * problem.  We have to decide which.
 		 */
-		if (	/* Filemark 0, ignore EOM, ILI 0, no sense */
-				(srb->sense_buffer[2] & 0xaf) == 0 &&
-			/* No ASC or ASCQ */
-				srb->sense_buffer[12] == 0 &&
-				srb->sense_buffer[13] == 0) {
-
+		if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+		    fm_ili == 0) {
 			/* If things are really okay, then let's show that.
 			 * Zero out the sense buffer so the higher layers
 			 * won't realize we did an unsolicited auto-sense.

@@ -814,7 +815,10 @@ Retry_Sense:
 			 */
 			} else {
 				srb->result = DID_ERROR << 16;
-				srb->sense_buffer[2] = HARDWARE_ERROR;
+				if ((sshdr.response_code & 0x72) == 0x72)
+					srb->sense_buffer[1] = HARDWARE_ERROR;
+				else
+					srb->sense_buffer[2] = HARDWARE_ERROR;
 			}
 		}
 	}

@@ -356,10 +356,7 @@ static void ohci_finish_controller_resum
 		msleep(20);
 	}
 
-	/* Does the root hub have a port wakeup pending? */
-	if (ohci_readl(ohci, &ohci->regs->intrstatus) &
-			(OHCI_INTR_RD | OHCI_INTR_RHSC))
-		usb_hcd_resume_root_hub(hcd);
+	usb_hcd_resume_root_hub(hcd);
 }
 
 /* Carry out polling-, autostop-, and autoresume-related state changes */

@@ -1602,7 +1602,7 @@ cleanup(void)
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	unregister_chrdev_region(g_printer_devno, 2);
+	unregister_chrdev_region(g_printer_devno, 1);
 	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }

@@ -607,9 +607,10 @@ static int findintfep(struct usb_device
 }
 
 static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
-			   unsigned int index)
+			   unsigned int request, unsigned int index)
 {
 	int ret = 0;
+	struct usb_host_interface *alt_setting;
 
 	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
 	 && ps->dev->state != USB_STATE_ADDRESS

@@ -618,6 +619,19 @@ static int check_ctrlrecip(struct dev_st
 	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
 		return 0;
 
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, where wIndex is (interface << 8 | altsetting)
+	 * instead of just interface
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			index >>= 8;
+	}
+
 	index &= 0xff;
 	switch (requesttype & USB_RECIP_MASK) {
 	case USB_RECIP_ENDPOINT:

@@ -770,7 +784,8 @@ static int proc_control(struct dev_state
 
 	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
 		return -EFAULT;
-	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+			      ctrl.wIndex);
 	if (ret)
 		return ret;
 	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */

@@ -1100,7 +1115,7 @@ static int proc_do_submiturb(struct dev_
 			kfree(dr);
 			return -EINVAL;
 		}
-		ret = check_ctrlrecip(ps, dr->bRequestType,
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
 				      le16_to_cpup(&dr->wIndex));
 		if (ret) {
 			kfree(dr);

@@ -407,7 +407,7 @@ static void async_completed(struct urb *
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		pid = as->pid;
+		pid = get_pid(as->pid);
 		uid = as->uid;
 		euid = as->euid;
 		secid = as->secid;

@@ -422,9 +422,11 @@ static void async_completed(struct urb *
 		cancel_bulk_urbs(ps, as->bulk_addr);
 	spin_unlock(&ps->lock);
 
-	if (signr)
+	if (signr) {
 		kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
 				      euid, secid);
+		put_pid(pid);
+	}
 
 	wake_up(&ps->wait);
 }

@@ -1534,6 +1534,9 @@ static const struct usb_device_id acm_id
 	{ NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
+	/* Support for Owen devices */
+	{ USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */
+
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
 	/* Support Lego NXT using pbLua firmware */

@@ -38,6 +38,24 @@ static const struct usb_device_id usb_qu
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C200 */
+	{ USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C250 */
+	{ USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam B/C500 */
+	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C310 */
+	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C270 */
+	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 

@@ -69,6 +87,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 

@@ -44,6 +44,9 @@ static const struct usb_device_id usb_qu
 	/* Logitech Webcam C250 */
 	{ USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C300 */
+	{ USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 

@@ -92,6 +92,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
+	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

@@ -148,3 +148,8 @@
 /* WinChipHead USB->RS 232 adapter */
 #define WINCHIPHEAD_VENDOR_ID		0x4348
 #define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID	0x0b8c
+#define SMART_PRODUCT_ID	0x2303
+

@@ -206,6 +206,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
 	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },

@@ -420,9 +420,11 @@
 #define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
 
 /*
- * DSS-20 Sync Station for Sony Ericsson P800
+ * Sony Ericsson product ids
  */
-#define FTDI_DSS20_PID          0xFC82
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
 
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */

@@ -746,6 +746,8 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },

@@ -54,6 +54,7 @@
 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
 
 #define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 

@@ -475,31 +475,24 @@ enum option_blacklist_reason {
 		OPTION_BLACKLIST_RESERVED_IF = 2
 };
 
+#define MAX_BL_NUM  8
 struct option_blacklist_info {
-	const u32 infolen;	/* number of interface numbers on blacklist */
-	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
-	enum option_blacklist_reason reason;
+	/* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */
+	const unsigned long sendsetup;
+	/* bitfield of interface numbers for OPTION_BLACKLIST_RESERVED_IF */
+	const unsigned long reserved;
 };
 
-static const u8 four_g_w14_no_sendsetup[] = { 0, 1 };
 static const struct option_blacklist_info four_g_w14_blacklist = {
-	.infolen = ARRAY_SIZE(four_g_w14_no_sendsetup),
-	.ifaceinfo = four_g_w14_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1),
 };
 
-static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
 static const struct option_blacklist_info alcatel_x200_blacklist = {
-	.infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
-	.ifaceinfo = alcatel_x200_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1),
 };
 
-static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
 static const struct option_blacklist_info zte_k3765_z_blacklist = {
-	.infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
-	.ifaceinfo = zte_k3765_z_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
 };
 
 static const struct usb_device_id option_ids[] = {

@@ -1255,21 +1248,28 @@ static int option_probe(struct usb_seria
 	return 0;
 }
 
-static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
-				const struct option_blacklist_info *blacklist)
+static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
+			   const struct option_blacklist_info *blacklist)
 {
-	const u8  *info;
-	int i;
+	unsigned long num;
+	const unsigned long *intf_list;
 
 	if (blacklist) {
-		info = blacklist->ifaceinfo;
+		if (reason == OPTION_BLACKLIST_SENDSETUP)
+			intf_list = &blacklist->sendsetup;
+		else if (reason == OPTION_BLACKLIST_RESERVED_IF)
+			intf_list = &blacklist->reserved;
+		else {
+			BUG_ON(reason);
+			return false;
+		}
 
-		for (i = 0; i < blacklist->infolen; i++) {
-			if (info[i] == ifnum)
-				return blacklist->reason;
+		for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
+			if (num == ifnum)
+				return true;
 		}
 	}
-	return OPTION_BLACKLIST_NONE;
+	return false;
 }
 
 static void option_instat_callback(struct urb *urb)

@@ -1343,9 +1343,8 @@ static int option_send_setup(struct usb_
 	int val = 0;
 	dbg("%s", __func__);
 
-	if (is_blacklisted(ifNum,
-			   (struct option_blacklist_info *) intfdata->private)
-	    == OPTION_BLACKLIST_SENDSETUP) {
+	if (is_blacklisted(ifNum, OPTION_BLACKLIST_SENDSETUP,
+			(struct option_blacklist_info *) intfdata->private)) {
 		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
 		return -EIO;
 	}

@@ -495,6 +495,10 @@ static const struct option_blacklist_inf
 	.sendsetup = BIT(0) | BIT(1) | BIT(2),
 };
 
+static const struct option_blacklist_info huawei_cdc12_blacklist = {
+	.reserved = BIT(1) | BIT(2),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },

@@ -592,12 +596,15 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },

@@ -1207,10 +1214,35 @@ static void __exit option_exit(void)
 module_init(option_init);
 module_exit(option_exit);
 
+static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
+			   const struct option_blacklist_info *blacklist)
+{
+	unsigned long num;
+	const unsigned long *intf_list;
+
+	if (blacklist) {
+		if (reason == OPTION_BLACKLIST_SENDSETUP)
+			intf_list = &blacklist->sendsetup;
+		else if (reason == OPTION_BLACKLIST_RESERVED_IF)
+			intf_list = &blacklist->reserved;
+		else {
+			BUG_ON(reason);
+			return false;
+		}
+
+		for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
+			if (num == ifnum)
+				return true;
+		}
+	}
+	return false;
+}
+
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
 	struct usb_wwan_intf_private *data;
+
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&

@@ -1223,14 +1255,14 @@ static int option_probe(struct usb_seria
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
-	/* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */
-	if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
-		(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
-			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 ||
-			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) &&
-		(serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 ||
-			serial->interface->cur_altsetting->desc.bInterfaceNumber == 2))
-		return -ENODEV;
+	/* Don't bind reserved interfaces (like network ones) which often have
+	 * the same class/subclass/protocol as the serial interfaces.  Look at
+	 * the Windows driver .INF files for reserved interface numbers.
+	 */
+	if (is_blacklisted(
+		serial->interface->cur_altsetting->desc.bInterfaceNumber,
+		OPTION_BLACKLIST_RESERVED_IF,
+		(const struct option_blacklist_info *) id->driver_info))
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&

@@ -1239,7 +1271,6 @@ static int option_probe(struct usb_seria
 		return -ENODEV;
 
 	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
-
 	if (!data)
 		return -ENOMEM;
 	data->send_setup = option_send_setup;

@@ -1248,30 +1279,6 @@ static int option_probe(struct usb_seria
 	return 0;
 }
 
-static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
-			   const struct option_blacklist_info *blacklist)
-{
-	unsigned long num;
-	const unsigned long *intf_list;
-
-	if (blacklist) {
-		if (reason == OPTION_BLACKLIST_SENDSETUP)
-			intf_list = &blacklist->sendsetup;
-		else if (reason == OPTION_BLACKLIST_RESERVED_IF)
-			intf_list = &blacklist->reserved;
-		else {
-			BUG_ON(reason);
-			return false;
-		}
-
-		for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
-			if (num == ifnum)
-				return true;
-		}
-	}
-	return false;
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;

@@ -491,6 +491,10 @@ static const struct option_blacklist_inf
 	.sendsetup = BIT(0) | BIT(1),
 };
 
+static const struct option_blacklist_info zte_0037_blacklist = {
+	.sendsetup = BIT(0) | BIT(1),
+};
+
 static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.sendsetup = BIT(0) | BIT(1) | BIT(2),
 };

@@ -743,7 +747,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&zte_0037_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },

@@ -497,12 +497,34 @@ static const struct option_blacklist_inf
 
 static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+	.reserved = BIT(4),
 };
 
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
 
+static const struct option_blacklist_info net_intf1_blacklist = {
+	.reserved = BIT(1),
+};
+
+static const struct option_blacklist_info net_intf3_blacklist = {
+	.reserved = BIT(3),
+};
+
+static const struct option_blacklist_info net_intf4_blacklist = {
+	.reserved = BIT(4),
+};
+
+static const struct option_blacklist_info net_intf5_blacklist = {
+	.reserved = BIT(5),
+};
+
+static const struct option_blacklist_info zte_mf626_blacklist = {
+	.sendsetup = BIT(0) | BIT(1),
+	.reserved = BIT(4),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },

@@ -709,7 +731,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },

@@ -724,26 +747,30 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist },
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },

@@ -752,24 +779,30 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },

@@ -784,11 +817,13 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) },

@@ -255,8 +255,6 @@ static int ar9003_hw_proc_txdesc(struct
 		return -EIO;
 	}
 
-	if (status & AR_TxOpExceeded)
-		ts->ts_status |= ATH9K_TXERR_XTXOP;
 	ts->ts_rateindex = MS(status, AR_FinalTxIdx);
 	ts->ts_seqnum = MS(status, AR_SeqNum);
 	ts->tid = MS(status, AR_TxTid);

@@ -267,6 +265,8 @@ static int ar9003_hw_proc_txdesc(struct
 	ts->ts_status = 0;
 	ts->ts_flags  = 0;
 
+	if (status & AR_TxOpExceeded)
+		ts->ts_status |= ATH9K_TXERR_XTXOP;
 	status = ACCESS_ONCE(ads->status2);
 	ts->ts_rssi_ctl0 = MS(status, AR_TxRSSIAnt00);
 	ts->ts_rssi_ctl1 = MS(status, AR_TxRSSIAnt01);

@@ -643,8 +643,9 @@ static void ar9003_hw_detect_outlier(int
 			outlier_idx = max_idx;
 		else
 			outlier_idx = min_idx;
+
+		mp_coeff[outlier_idx] = mp_avg;
 	}
-	mp_coeff[outlier_idx] = mp_avg;
 }
 
 static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,

@@ -37,6 +37,7 @@ static struct usb_device_id ath9k_hif_us
 	{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
 	{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
 	{ USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */
+	{ USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */
 
 	{ USB_DEVICE(0x0cf3, 0x7015),
 	  .driver_info = AR9287_USB },  /* Atheros */

@@ -1931,6 +1931,10 @@ int ath9k_hw_fill_cap_info(struct ath_hw
 		pCap->num_gpio_pins = AR9271_NUM_GPIO;
 	else if (AR_DEVID_7010(ah))
 		pCap->num_gpio_pins = AR7010_NUM_GPIO;
+	else if (AR_SREV_9300_20_OR_LATER(ah))
+		pCap->num_gpio_pins = AR9300_NUM_GPIO;
+	else if (AR_SREV_9287_11_OR_LATER(ah))
+		pCap->num_gpio_pins = AR9287_NUM_GPIO;
 	else if (AR_SREV_9285_12_OR_LATER(ah))
 		pCap->num_gpio_pins = AR9285_NUM_GPIO;
 	else if (AR_SREV_9280_20_OR_LATER(ah))

@@ -502,9 +502,6 @@ static void ath9k_ani_reset_old(struct a
 		ath9k_hw_ani_control(ah, ATH9K_ANI_CCK_WEAK_SIGNAL_THR,
 				     ATH9K_ANI_CCK_WEAK_SIG_THR);
 
-		ath9k_hw_setrxfilter(ah, ath9k_hw_getrxfilter(ah) |
-				     ATH9K_RX_FILTER_PHYERR);
-
 		ath9k_ani_restart(ah);
 		return;
 	}

@@ -525,8 +522,6 @@ static void ath9k_ani_reset_old(struct a
 		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
 				     aniState->firstepLevel);
 
-	ath9k_hw_setrxfilter(ah, ath9k_hw_getrxfilter(ah) &
-			     ~ATH9K_RX_FILTER_PHYERR);
 	ath9k_ani_restart(ah);
 
 	ENABLE_REGWRITE_BUFFER(ah);