Skip to contentSkip to conversation

Proposed patch for USB and RS485 on imx board

PATCH New Aurelien Bouin 2 participants 2 messages Nov 10, 2011

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Proposed patch for USB and RS485 on imx board

Hello,

Attached are two patches :?
- imx_rs485_support.patch : Implement the RS485 on imx board... like describe in the kernel documentation : linux/Documentation/serial/serial-rs485.txt
- imx_solve_compilation_problem_with_mx27.patch : Solve a compilation problem when using host USB port with mx27 boards

Feel free to contact me if you have any problem in merging them,

Thank you,

Aurelien BOUIN
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111110/46bbb5a8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imx_solve_compilation_problem_with_mx27.patch
Type: application/octet-stream
Size: 330 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111110/46bbb5a8/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imx_rs485_support.patch
Type: application/octet-stream
Size: 6344 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111110/46bbb5a8/attachment-0001.obj>

#1 lore raw

PATCH 1/1 Proposed patch for USB and RS485 on imx board

Hi,

thanks for your submission.

Quoted 1 line

Attached are two patches :?

Please inline them in the future, that makes reviewing much easier. See Documentation/SubmittingPatches

Quoted 1 line

- imx_rs485_support.patch : Implement the RS485 on imx board... like

This should have been sent to the linux-serial list, but it won't get accepted. There will only be mainline support for _hardware based_ direction switching; emulating this in software will not guarantee timings, see http://article.gmane.org/gmane.linux.serial/3619/

Quoted 2 lines

- imx_solve_compilation_problem_with_mx27.patch : Solve a compilation problem when using host USB port with mx27 boards

See again SubmittingPatches, your Signed-off-by line is missing. And it should go to the USB-list (with this one CCed, that's okay).

Regards,

Wolfram

Signature · 9 lines
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111110/52d198d2/attachment.sig>