Skip to contentSkip to conversation

depmod memory usage.

DISCUSSION Dave Jones 2 participants 2 messages Nov 18, 2011

lore
Share & tools
lore

Dave Jones

author
#0 lore raw

I pulled out an older laptop last night to test something, and built a kernel on it. When I did the make install part, the machine almost ground to a halt.

It turned out that depmod used at peak 1.7GB of memory, (the laptop only had 1GB, so it was swapping to the point of locking up interactivity for minutes at a time). It took an hour to complete.

The config file is pretty pathological (it's a distro build, so tons of modules -- http://codemonkey.org.uk/junk/fedora-config-x86-64)

It's been a while since I built on a machine with this amount of memory, but it seems that depmod has taken a big step backwards as it used to cope with this just fine.

This is with the m-i-t that shipped in Fedora 16 (3.16)

Dave

#1 lore raw
Quoted 8 lines · Dave Jones

I pulled out an older laptop last night to test something, and built a kernel on it. When I did the make install part, the machine almost ground to a halt.

It turned out that depmod used at peak 1.7GB of memory, (the laptop only had 1GB, so it was swapping to the point of locking up interactivity for minutes at a time). It took an hour to complete.

Quoted 8 lines

The config file is pretty pathological (it's a distro build, so tons of modules -- http://codemonkey.org.uk/junk/fedora-config-x86-64)

It's been a while since I built on a machine with this amount of memory, but it seems that depmod has taken a big step backwards as it used to cope with this just fine.

This is with the m-i-t that shipped in Fedora 16 (3.16)

I'll do some digging at the distro specific side of things. It's odd because I've got a couple of netbooks and embedded systems with *less* memory than 1GB that run depmod just fine. There were some memory leaks in older versions that should not be a problem any more.

Jon.