Skip to contentSkip to conversation

3.2-rc2 regression: floppy driver breaks boot

DISCUSSION Pavel Machek 2 participants 3 messages Nov 22, 2011

lore
Share & tools
lore
#0 lore raw

Hi!

3.2-rc1..rc2 fail to boot, due to some warn-on in block layer. It seems that floppy driver is responsible.

I'll try to turn the floppy driver off and see what happens.

Seems like floppy driver has no maintianer :-(.
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 6 lines · Pavel Machek

3.2-rc1..rc2 fail to boot, due to some warn-on in block layer. It seems that floppy driver is responsible.

I'll try to turn the floppy driver off and see what happens.

Seems like floppy driver has no maintianer :-(.

Might be my issue as well. I've got an old AMD K6-III/450 system with two floppy drives. When booting 3.2-rc2 (didn't try "-rc1"), the system switches video modes (VESA FB console), and then hangs/panics. No further info available because the panic happens too early for syslog to record it, and the console goes blank at the time of the mode switch:
there's nothing on the screen I might transcribe manually. 3.1-final works fine.

--Bob

#2 lore raw
Quoted 5 lines · Bob Tracy
Quoted 4 lines · Pavel Machek

3.2-rc1..rc2 fail to boot, due to some warn-on in block layer. It seems that floppy driver is responsible.

I'll try to turn the floppy driver off and see what happens.

Without floppy support my x60 boot. iwlwifi driver (CONFIG_IWLWIFI_LEGACY=y) went crazy after hibernation, but thats separate issue.

Quoted 8 lines
Quoted 1 line

Seems like floppy driver has no maintianer :-(.

Might be my issue as well. I've got an old AMD K6-III/450 system with two floppy drives. When booting 3.2-rc2 (didn't try "-rc1"), the system switches video modes (VESA FB console), and then hangs/panics. No further info available because the panic happens too early for syslog to record it, and the console goes blank at the time of the mode switch:
there's nothing on the screen I might transcribe manually. 3.1-final

Try turning off floppy support. That helped for me.
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html