2.6.32.49-longterm review

@@ -461,14 +461,16 @@ static void st_scsi_execute_end(struct r
 {
 	struct st_request *SRpnt = req->end_io_data;
 	struct scsi_tape *STp = SRpnt->stp;
+	struct bio *tmp;
 
 	STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
 	STp->buffer->cmdstat.residual = req->resid_len;
 
+	tmp = SRpnt->bio;
 	if (SRpnt->waiting)
 		complete(SRpnt->waiting);
 
-	blk_rq_unmap_user(SRpnt->bio);
+	blk_rq_unmap_user(tmp);
 	__blk_put_request(req->q, req);
 }
 

@@ -275,6 +275,7 @@ static void scsi_host_dev_release(struct
 {
 	struct Scsi_Host *shost = dev_to_shost(dev);
 	struct device *parent = dev->parent;
+	struct request_queue *q;
 
 	scsi_proc_hostdir_rm(shost->hostt);
 

@@ -282,9 +283,11 @@ static void scsi_host_dev_release(struct
 		kthread_stop(shost->ehandler);
 	if (shost->work_q)
 		destroy_workqueue(shost->work_q);
-	if (shost->uspace_req_q) {
-		kfree(shost->uspace_req_q->queuedata);
-		scsi_free_queue(shost->uspace_req_q);
+	q = shost->uspace_req_q;
+	if (q) {
+		kfree(q->queuedata);
+		q->queuedata = NULL;
+		scsi_free_queue(q);
 	}
 
 	scsi_destroy_command_freelist(shost);

@@ -1672,6 +1672,15 @@ struct request_queue *scsi_alloc_queue(s
 
 void scsi_free_queue(struct request_queue *q)
 {
+	unsigned long flags;
+
+	WARN_ON(q->queuedata);
+
+	/* cause scsi_request_fn() to kill all non-finished requests */
+	spin_lock_irqsave(q->queue_lock, flags);
+	q->request_fn(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
 	blk_cleanup_queue(q);
 }
 

@@ -129,6 +129,9 @@ unx_match(struct auth_cred *acred, struc
 	for (i = 0; i < groups ; i++)
 		if (cred->uc_gids[i] != GROUP_AT(acred->group_info, i))
 			return 0;
+	if (groups < NFS_NGROUPS &&
+	    cred->uc_gids[groups] != NOGROUP)
+		return 0;
 	return 1;
 }
 

@@ -20,6 +20,7 @@ static u16 nla_attr_minlen[NLA_TYPE_MAX+
 	[NLA_U16]	= sizeof(u16),
 	[NLA_U32]	= sizeof(u32),
 	[NLA_U64]	= sizeof(u64),
+	[NLA_MSECS]	= sizeof(u64),
 	[NLA_NESTED]	= NLA_HDRLEN,
 };
 

@@ -290,6 +290,7 @@ static ssize_t mtd_write(struct file *fi
 			ops.mode = MTD_OOB_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
+			ops.ooboffs = 0;
 			ops.len = len;
 
 			ret = mtd->write_oob(mtd, *ppos, &ops);

@@ -293,7 +293,7 @@ int enter_state(suspend_state_t state)
  */
 int pm_suspend(suspend_state_t state)
 {
-	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+	if (state > PM_SUSPEND_ON && state < PM_SUSPEND_MAX)
 		return enter_state(state);
 	return -EINVAL;
 }

@@ -40,6 +40,8 @@ int hfs_mac2asc(struct super_block *sb,
 
 	src = in->name;
 	srclen = in->len;
+	if (srclen > HFS_NAMELEN)
+		srclen = HFS_NAMELEN;
 	dst = out;
 	dstlen = HFS_MAX_NAMELEN;
 	if (nls_io) {

@@ -472,6 +472,7 @@ static int wm8940_set_bias_level(struct
 		ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg);
 		break;
 	}
+	codec->bias_level = level;
 
 	return ret;
 }

@@ -3038,12 +3038,16 @@ static void handle_stripe5(struct stripe
 	/* check if the array has lost two devices and, if so, some requests might
 	 * need to be failed
 	 */
-	if (s.failed > 1 && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &return_bi);
-	if (s.failed > 1 && s.syncing) {
-		md_done_sync(conf->mddev, STRIPE_SECTORS,0);
-		clear_bit(STRIPE_SYNCING, &sh->state);
-		s.syncing = 0;
+	if (s.failed > 1) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+		if (s.syncing) {
+			md_done_sync(conf->mddev, STRIPE_SECTORS,0);
+			clear_bit(STRIPE_SYNCING, &sh->state);
+			s.syncing = 0;
+		}
 	}
 
 	/* might be able to return some write requests if the parity block

@@ -3314,12 +3318,16 @@ static void handle_stripe6(struct stripe
 	/* check if the array has lost >2 devices and, if so, some requests
 	 * might need to be failed
 	 */
-	if (s.failed > 2 && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &return_bi);
-	if (s.failed > 2 && s.syncing) {
-		md_done_sync(conf->mddev, STRIPE_SECTORS,0);
-		clear_bit(STRIPE_SYNCING, &sh->state);
-		s.syncing = 0;
+	if (s.failed > 2) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+		if (s.syncing) {
+			md_done_sync(conf->mddev, STRIPE_SECTORS,0);
+			clear_bit(STRIPE_SYNCING, &sh->state);
+			s.syncing = 0;
+		}
 	}
 
 	/*

201 lines not on this page · raw message

@@ -12664,7 +12664,6 @@ static struct snd_pci_quirk alc268_cfg_t
 	SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
-	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
 	SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
 			"Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
 	/* almost compatible with toshiba but with optional digital outs;

@@ -488,8 +488,15 @@ i915_gem_pread_ioctl(struct drm_device *
 	 */
 	if (args->offset > obj->size || args->size > obj->size ||
 	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference(obj);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	if (i915_gem_object_needs_bit17_swizzle(obj)) {

@@ -501,8 +508,8 @@ i915_gem_pread_ioctl(struct drm_device *
 							file_priv);
 	}
 
+err:
 	drm_gem_object_unreference(obj);
-
 	return ret;
 }
 

@@ -592,8 +599,6 @@ i915_gem_gtt_pwrite_fast(struct drm_devi
 
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	remain = args->size;
-	if (!access_ok(VERIFY_READ, user_data, remain))
-		return -EFAULT;
 
 
 	mutex_lock(&dev->struct_mutex);

@@ -961,8 +966,15 @@ i915_gem_pwrite_ioctl(struct drm_device
 	 */
 	if (args->offset > obj->size || args->size > obj->size ||
 	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference(obj);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise

@@ -995,8 +1007,8 @@ i915_gem_pwrite_ioctl(struct drm_device
 		DRM_INFO("pwrite failed %d\n", ret);
 #endif
 
+err:
 	drm_gem_object_unreference(obj);
-
 	return ret;
 }
 

@@ -482,12 +482,8 @@ i915_gem_pread_ioctl(struct drm_device *
 		return -EBADF;
 	obj_priv = obj->driver_private;
 
-	/* Bounds check source.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
+	/* Bounds check source.  */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto err;
 	}

@@ -960,12 +956,8 @@ i915_gem_pwrite_ioctl(struct drm_device
 		return -EBADF;
 	obj_priv = obj->driver_private;
 
-	/* Bounds check destination.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
+	/* Bounds check destination. */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto err;
 	}

@@ -471,6 +471,12 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	/*
+	 * Called from syscore in mainline but called directly here
+	 * since syscore does not exist in this tree.
+	 */
+	irq_pm_syscore_resume();
+
 	WARN_ONCE(!irqs_disabled(),
 		"Interrupts enabled while resuming system devices\n");
 

@@ -536,7 +536,7 @@ int bind_ipi_to_irqhandler(enum ipi_vect
 	if (irq < 0)
 		return irq;
 
-	irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME;
+	irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME | IRQF_EARLY_RESUME;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
 	if (retval != 0) {
 		unbind_from_irq(irq);

@@ -54,6 +54,8 @@
  *                irq line disabled until the threaded handler has been run.
  * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
  * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
+ * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
+ *                resume time.
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040

@@ -66,6 +68,7 @@
 #define IRQF_ONESHOT		0x00002000
 #define IRQF_NO_SUSPEND		0x00004000
 #define IRQF_FORCE_RESUME	0x00008000
+#define IRQF_EARLY_RESUME	0x00020000
 
 #define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND)
 

@@ -198,13 +201,16 @@ extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
 extern int check_wakeup_irqs(void);
+extern void irq_pm_syscore_resume(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
+static inline void irq_pm_syscore_resume(void) { };
 #endif
 #else
 static inline void suspend_device_irqs(void) { };
 static inline void resume_device_irqs(void) { };
 static inline int check_wakeup_irqs(void) { return 0; }
+static inline void irq_pm_syscore_resume(void) { };
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)

@@ -39,25 +39,46 @@ void suspend_device_irqs(void)
 }
 EXPORT_SYMBOL_GPL(suspend_device_irqs);
 
-/**
- * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
- *
- * Enable all interrupt lines previously disabled by suspend_device_irqs() that
- * have the IRQ_SUSPENDED flag set.
- */
-void resume_device_irqs(void)
+static void resume_irqs(bool want_early)
 {
 	struct irq_desc *desc;
 	int irq;
 
 	for_each_irq_desc(irq, desc) {
 		unsigned long flags;
+		bool is_early = desc->action &&
+			desc->action->flags & IRQF_EARLY_RESUME;
+
+		if (is_early != want_early)
+			continue;
 
 		spin_lock_irqsave(&desc->lock, flags);
 		__enable_irq(desc, irq, true);
 		spin_unlock_irqrestore(&desc->lock, flags);
 	}
 }
+
+/**
+ * irq_pm_syscore_ops - enable interrupt lines early
+ *
+ * Enable all interrupt lines with %IRQF_EARLY_RESUME set.
+ */
+void irq_pm_syscore_resume(void)
+{
+	resume_irqs(true);
+}
+
+/**
+ * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
+ *
+ * Enable all non-%IRQF_EARLY_RESUME interrupt lines previously
+ * disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag
+ * set as well as those with %IRQF_FORCE_RESUME.
+ */
+void resume_device_irqs(void)
+{
+	resume_irqs(false);
+}
 EXPORT_SYMBOL_GPL(resume_device_irqs);
 
 /**

@@ -13,6 +13,7 @@ struct vm_area_struct;		/* vma defining
 #define VM_MAP		0x00000004	/* vmap()ed pages */
 #define VM_USERMAP	0x00000008	/* suitable for remap_vmalloc_range */
 #define VM_VPAGES	0x00000010	/* buffer for pages was vmalloc'ed */
+#define VM_UNLIST	0x00000020	/* vm_struct is not listed in vmlist */
 /* bits [20..32] reserved for arch specific ioremap internals */
 
 /*

111 lines not on this page · raw message

@@ -1141,7 +1141,7 @@ static struct sk_buff *udp6_ufo_fragment
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Check if there is enough headroom to insert fragment header. */
-	if ((skb_headroom(skb) < frag_hdr_sz) &&
+	if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
 	    pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
 		goto out;
 

@@ -101,7 +101,6 @@ static struct usb_device_id id_table []
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };

@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303

@@ -2355,13 +2355,19 @@ static void ftdi_set_termios(struct tty_
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	termios->c_cflag &= ~CMSPAR;

@@ -2398,6 +2404,7 @@ static void ftdi_set_termios(struct tty_
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),

@@ -2423,6 +2430,7 @@ static void ftdi_set_termios(struct tty_
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,

@@ -58,7 +58,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available

@@ -66,9 +68,6 @@ void usb_stor_pad12_command(struct scsi_
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }

@@ -47,6 +47,9 @@ static const struct usb_device_id usb_qu
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 

@@ -53,12 +53,36 @@ static const struct usb_device_id usb_qu
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 

@@ -96,6 +96,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/serial.h>
 
 #include <linux/uaccess.h>
 #include <asm/system.h>

@@ -2436,6 +2437,20 @@ static int tty_tiocmset(struct tty_struc
 	return tty->ops->tiocmset(tty, file, set, clear);
 }
 
+static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
+{
+	int retval = -EINVAL;
+	struct serial_icounter_struct icount;
+	memset(&icount, 0, sizeof(icount));
+	if (tty->ops->get_icount)
+		retval = tty->ops->get_icount(tty, &icount);
+	if (retval != 0)
+		return retval;
+	if (copy_to_user(arg, &icount, sizeof(icount)))
+		return -EFAULT;
+	return 0;
+}
+
 struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
 {
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&

@@ -2556,6 +2571,12 @@ long tty_ioctl(struct file *file, unsign
 	case TIOCMBIC:
 	case TIOCMBIS:
 		return tty_tiocmset(tty, file, cmd, p);
+	case TIOCGICOUNT:
+		retval = tty_tiocgicount(tty, p);
+		/* For the moment allow fall through to the old method */
+        	if (retval != -EINVAL)
+			return retval;
+		break;
 	case TCFLSH:
 		switch (arg) {
 		case TCIFLUSH:

@@ -1067,10 +1067,10 @@ uart_wait_modem_status(struct uart_state
  * NB: both 1->0 and 0->1 transitions are counted except for
  *     RI where only 0->1 is counted.
  */
-static int uart_get_count(struct uart_state *state,
-			  struct serial_icounter_struct __user *icnt)
+static int uart_get_icount(struct tty_struct *tty,
+			  struct serial_icounter_struct *icount)
 {
-	struct serial_icounter_struct icount;
+	struct uart_state *state = tty->driver_data;
 	struct uart_icount cnow;
 	struct uart_port *uport = state->uart_port;
 

@@ -1078,19 +1078,19 @@ static int uart_get_count(struct uart_st
 	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
 	spin_unlock_irq(&uport->lock);
 
-	icount.cts         = cnow.cts;
-	icount.dsr         = cnow.dsr;
-	icount.rng         = cnow.rng;
-	icount.dcd         = cnow.dcd;
-	icount.rx          = cnow.rx;
-	icount.tx          = cnow.tx;
-	icount.frame       = cnow.frame;
-	icount.overrun     = cnow.overrun;
-	icount.parity      = cnow.parity;
-	icount.brk         = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+	return 0;
 }
 
 /*

@@ -1143,10 +1143,6 @@ uart_ioctl(struct tty_struct *tty, struc
 	case TIOCMIWAIT:
 		ret = uart_wait_modem_status(state, arg);
 		break;
-
-	case TIOCGICOUNT:
-		ret = uart_get_count(state, uarg);
-		break;
 	}
 
 	if (ret != -ENOIOCTLCMD)

@@ -2322,6 +2318,7 @@ static const struct tty_operations uart_
 #endif
 	.tiocmget	= uart_tiocmget,
 	.tiocmset	= uart_tiocmset,
+	.get_icount	= uart_get_icount,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_init	= uart_poll_init,
 	.poll_get_char	= uart_poll_get_char,

@@ -562,6 +562,18 @@ static int serial_tiocmset(struct tty_st
 	return -EINVAL;
 }
 
+static int serial_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (port->serial->type->get_icount)
+		return port->serial->type->get_icount(tty, icount);
+	return -EINVAL;
+}
+
 /*
  * We would be calling tty_wakeup here, but unfortunately some line
  * disciplines have an annoying habit of calling tty->write from

@@ -1214,6 +1226,7 @@ static const struct tty_operations seria
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.get_icount = 		serial_get_icount,
 	.cleanup = 		serial_cleanup,
 	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,

@@ -224,6 +224,12 @@
  *	unless the tty also has a valid tty->termiox pointer.
  *
  *	Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ *	structure to complete. This method is optional and will only be called
+ *	if provided (otherwise EINVAL will be returned).
  */
 
 #include <linux/fs.h>

@@ -232,6 +238,7 @@
 
 struct tty_struct;
 struct tty_driver;
+struct serial_icounter_struct;
 
 struct tty_operations {
 	struct tty_struct * (*lookup)(struct tty_driver *driver,

@@ -268,6 +275,8 @@ struct tty_operations {
 			unsigned int set, unsigned int clear);
 	int (*resize)(struct tty_struct *tty, struct winsize *ws);
 	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+	int (*get_icount)(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);

@@ -259,6 +259,8 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	int  (*get_icount)(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
 	/* Called by the tty layer for port level work. There may or may not
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);

@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *t
 {
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
 	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}

@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *t
 		case TIOCMIWAIT:
 			printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
 			return 0;
-		/*
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
-			return 0;
-
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
 			/* "setserial -W" is called in Debian boot */

74 lines not on this page · raw message

67 lines not on this page · raw message

102 lines not on this page · raw message

86 lines not on this page · raw message

@@ -1783,24 +1783,24 @@ static int ntty_cflags_changed(struct po
 	return ret;
 }
 
-static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
+static int ntty_tiocgicount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
 {
+	struct port *port = tty->driver_data;
 	const struct async_icount cnow = port->tty_icount;
-	struct serial_icounter_struct icount;
-
-	icount.cts = cnow.cts;
-	icount.dsr = cnow.dsr;
-	icount.rng = cnow.rng;
-	icount.dcd = cnow.dcd;
-	icount.rx = cnow.rx;
-	icount.tx = cnow.tx;
-	icount.frame = cnow.frame;
-	icount.overrun = cnow.overrun;
-	icount.parity = cnow.parity;
-	icount.brk = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
 }
 
 static int ntty_ioctl(struct tty_struct *tty, struct file *file,

@@ -1819,9 +1819,7 @@ static int ntty_ioctl(struct tty_struct
 		rval = wait_event_interruptible(port->tty_wait,
 				ntty_cflags_changed(port, arg, &cprev));
 		break;
-	} case TIOCGICOUNT:
-		rval = ntty_ioctl_tiocgicount(port, argp);
-		break;
+	}
 	default:
 		DBG1("ERR: 0x%08X, %d", cmd, cmd);
 		break;

@@ -1895,6 +1893,7 @@ static const struct tty_operations tty_o
 	.chars_in_buffer = ntty_chars_in_buffer,
 	.tiocmget = ntty_tiocmget,
 	.tiocmset = ntty_tiocmset,
+	.get_icount = ntty_tiocgicount,
 };
 
 /* Module initialization */

85 lines not on this page · raw message

104 lines not on this page · raw message

92 lines not on this page · raw message

91 lines not on this page · raw message

69 lines not on this page · raw message

@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_s
 		BT_DBG("TIOCMIWAIT");
 		break;
 
-	case TIOCGICOUNT:
-		BT_DBG("TIOCGICOUNT");
-		break;
-
 	case TIOCGSERIAL:
 		BT_ERR("TIOCGSERIAL is not supported");
 		return -ENOIOCTLCMD;