Skip to contentSkip to conversation

board/amcc/common/flash.c: Fix GCC 4.6 build warning

PATCH New Wolfgang Denk 2 participants 10 messages Nov 17, 2011 – Dec 5, 2011

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 board/amcc/common/flash.c: Fix GCC 4.6 build warning

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0001-board-amcc-common-flash.c-Fix-GCC-4.6-build-warning.patch has no obvious style problems and is ready for submission.

 board/amcc/common/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)
board/amcc/common/flash.c +2 -8
index 8f23375..1960fc1 100644
@@ -396,7 +396,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -427,8 +427,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -454,7 +452,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
@@ -825,7 +822,7 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -856,8 +853,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -883,7 +878,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
Signature · 1 line
1.7.6.4
#1 lore raw

PATCH 1/3 board/amcc/common/flash.c: Fix GCC 4.6 build warning

Dear Stefan,

Quoted 8 lines · In message <[email protected]> I wrote:

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Quoted 7 lines

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0001-board-amcc-common-flash.c-Fix-GCC-4.6-build-warning.patch has no obvious style problems and is ready for submission.

 board/amcc/common/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

Ping for these patches:

11/17 To:u-boot at lists.d [PATCH 1/3] board/amcc/common/flash.c: Fix GCC 4.6 build warning
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/117300

ID    State        Name
--    -----        ----
126305 New          [U-Boot,1/3] board/amcc/common/flash.c: Fix GCC 4.6 build warning
11/17 To:u-boot at lists.d  [PATCH 2/3] board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/117301
ID    State        Name
--    -----        ----
126306 New          [U-Boot,2/3] board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings
11/17 To:u-boot at lists.d  [PATCH 3/3] board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/117299
ID    State        Name
--    -----        ----

126304 New [U-Boot,3/3] board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I wish I had a bronze torc for every user who didn't read the manual.
                             - Terry Pratchett, _The Light Fantastic_
author Applied
#2 lore raw

PATCH 1/3 board/amcc/common/flash.c: Fix GCC 4.6 build warning

In reply to Wolfgang Denk

Dear Wolfgang Denk,

Quoted 8 lines · In message <[email protected]> you wrote:

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Quoted 7 lines

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0001-board-amcc-common-flash.c-Fix-GCC-4.6-build-warning.patch has no obvious style problems and is ready for submission.

 board/amcc/common/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

Applied, thanks.

Stefan, hope this is OK with you.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It's like deja vu all over again."                      - Yogi Berra
#3 lore raw

PATCH 2/3 board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings

In reply to Wolfgang Denk

Fix:
flash.c: In function 'flash_erase_1':
flash.c:425:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:834:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0002-board-amcc-yucca-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.

 board/amcc/yucca/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)
board/amcc/yucca/flash.c +2 -8
index 20b6af9..ab513f9 100644
@@ -422,7 +422,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -449,8 +449,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 
 	printf("\n");
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -476,7 +474,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
@@ -831,7 +828,7 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -858,8 +855,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 
 	printf("\n");
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -885,7 +880,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
Signature · 1 line
1.7.6.4
#4 lore raw

PATCH 2/3 board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings

Quoted 10 lines · On Thursday 17 November 2011 20:50:00 Wolfgang Denk wrote:

Fix:
flash.c: In function 'flash_erase_1':
flash.c:425:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:834:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Thanks.

Best regards,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

author Applied
#5 lore raw

PATCH 2/3 board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings

In reply to Wolfgang Denk

Dear Wolfgang Denk,

Quoted 10 lines · In message <[email protected]> you wrote:

Fix:
flash.c: In function 'flash_erase_1':
flash.c:425:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:834:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Quoted 7 lines

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0002-board-amcc-yucca-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.

 board/amcc/yucca/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You can fool some of the people all of the time, and You can fool all
of the people some of the time, but You can't fool mom.
#6 lore raw

PATCH 1/3 board/amcc/common/flash.c: Fix GCC 4.6 build warning

In reply to Wolfgang Denk
Quoted 8 lines · On Thursday 17 November 2011 20:49:59 Wolfgang Denk wrote:

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Thanks.

Best regards,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

#7 lore raw

PATCH 3/3 board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

In reply to Wolfgang Denk

Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0003-board-amcc-taihu-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.

 board/amcc/taihu/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)
board/amcc/taihu/flash.c +2 -8
index e9fbbb1..63968a4 100644
@@ -511,7 +511,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -542,8 +542,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -569,7 +567,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
@@ -953,7 +950,7 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 {
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
+	int flag, prot, sect;
 	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -984,8 +981,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 		printf("\n");
 	}
 
-	l_sect = -1;
-
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
@@ -1011,7 +1006,6 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 				addr[CONFIG_SYS_FLASH_CHAR_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55555555;
 				addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30303030;	/* sector erase */
 			}
-			l_sect = sect;
 			/*
 			 * Wait for each sector to complete, it's more
 			 * reliable.  According to AMD Spec, you must
Signature · 1 line
1.7.6.4
#8 lore raw

PATCH 3/3 board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

Quoted 10 lines · On Thursday 17 November 2011 20:50:01 Wolfgang Denk wrote:

Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Thanks.

Best regards,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de

author Applied
#9 lore raw

PATCH 3/3 board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

In reply to Wolfgang Denk

Dear Wolfgang Denk,

Quoted 10 lines · In message <[email protected]> you wrote:

Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable]

Quoted 7 lines

---
total: 0 errors, 0 warnings, 46 lines checked
NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE 0003-board-amcc-taihu-flash.c-Fix-GCC-4.6-build-warnings.patch has no obvious style problems and is ready for submission.

 board/amcc/taihu/flash.c |   10 ++--------
 1 files changed, 2 insertions(+), 8 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
C++ was an interesting and valuable experiment, but we've learned its
lessons and it's time to move on.
                            - Peter Curran in <[email protected]>