Skip to contentSkip to conversation

be2net: update some counters to display via ethtool

PATCH Applied Ajit Khaparde 2 participants 2 messages Dec 9, 2011 – Dec 11, 2011

Subsystems (3)
Networking Network drivers Emulex 10Gbps NIC BE2, BE3-r, Lancer, Skyhawk-R driver (be2net)
lore
Share & tools
lore

Ajit Khaparde

author
#0 lore raw

PATCH 1/2 be2net: update some counters to display via ethtool

update pmem_fifo_overflow_drop, rx_priority_pause_frames counters.

Signed-off-by Ajit Khaparde <[email protected]>
---
 drivers/net/ethernet/emulex/benet/be_main.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/net/ethernet/emulex/benet/be_main.c +2 -0
index b8a526f..73fe389 100644
@@ -316,6 +316,8 @@ static void populate_be3_stats(struct be_adapter *adapter)
 	struct be_drv_stats *drvs = &adapter->drv_stats;
 
 	be_dws_le_to_cpu(hw_stats, sizeof(*hw_stats));
+	drvs->pmem_fifo_overflow_drop = port_stats->pmem_fifo_overflow_drop;
+	drvs->rx_priority_pause_frames = port_stats->rx_priority_pause_frames;
 	drvs->rx_pause_frames = port_stats->rx_pause_frames;
 	drvs->rx_crc_errors = port_stats->rx_crc_errors;
 	drvs->rx_control_frames = port_stats->rx_control_frames;
Signature · 1 line
1.7.5.4