ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
Subsystems (4)
Paul Walmsley
maintainerPATCH v2 1/1 ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
From: Benoit Cousson <[email protected]>
If the module does not have any modulemode, the _disable_module function will do nothing. There is then no point waiting for a idle status change.
It will remove the following warnings.
[ 0.331848] omap_hwmod: dmm: _wait_target_disable failed [ 0.339935] omap_hwmod: emif_fw: _wait_target_disable failed [ 0.348358] omap_hwmod: l3_main_1: _wait_target_disable failed [ 0.356964] omap_hwmod: l3_main_2: _wait_target_disable failed [ 0.365600] omap_hwmod: l4_abe: _wait_target_disable failed [ 0.373931] omap_hwmod: l4_cfg: _wait_target_disable failed [ 0.382263] omap_hwmod: l4_per: _wait_target_disable failed [ 0.391113] omap_hwmod: l4_wkup: _wait_target_disable failed [ 0.399536] omap_hwmod: dma_system: _wait_target_disable failed [ 0.408325] omap_hwmod: dss_core: _wait_target_disable failed [ 0.416839] omap_hwmod: dss_dispc: _wait_target_disable failed [ 0.425445] omap_hwmod: dss_dsi1: _wait_target_disable failed [ 0.433990] omap_hwmod: dss_dsi2: _wait_target_disable failed [ 0.442504] omap_hwmod: dss_hdmi: _wait_target_disable failed [ 0.451019] omap_hwmod: dss_rfbi: _wait_target_disable failed [ 0.459564] omap_hwmod: dss_venc: _wait_target_disable failed [ 0.489471] omap_hwmod: mailbox: _wait_target_disable failed [ 0.505920] omap_hwmod: spinlock: _wait_target_disable failed
Note: For such module, the state is managed automatically by HW according to clock domain transition. It is then not possible to wait for idle even later in the _idle function since the status will change at clock domain boundary.
[paul at pwsan.com: renamed fns to indicate that they are OMAP4-only; moved
_wait_target_disable() into _disable_module(), removing duplicate code]
---
Should apply cleanly on top of "[PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init".
arch/arm/mach-omap2/omap_hwmod.c | 98 +++++++++++++++++++------------------- 1 files changed, 49 insertions(+), 49 deletions(-)
arch/arm/mach-omap2/omap_hwmod.c +49 -49
@@ -706,27 +706,65 @@ static void _enable_module(struct omap_hwmod *oh) }/** -* _disable_module - enable CLKCTRL modulemode on OMAP4 +* _omap4_wait_target_disable - wait for a module to be disabled on OMAP4 +* @oh: struct omap_hwmod * +* +* Wait for a module @oh to enter slave idle. Returns 0 if the module +* does not have an IDLEST bit or if the module successfully enters +* slave idle; otherwise, pass along the return value of the +* appropriate *_cm*_wait_module_idle() function. +*/ +static int _omap4_wait_target_disable (struct omap_hwmod *oh) +{ +if (!cpu_is_omap44xx ()) +return 0 ; + +if (!oh) +return -EINVAL ; + +if (oh->_int_flags & _HWMOD_NO_MPU_PORT) +return 0 ; + +if (oh->flags &HWMOD_NO_IDLEST ) +return 0 ; + +return omap4_cminst_wait_module_idle (oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** +* _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Disable the PRCM module mode related to the hwmod @oh. -* No return value. +* Return EINVAL if the modulemode is not supported and 0 in case of success. */ -static void _disable_module (struct omap_hwmod *oh) +static int _omap4_disable_module (struct omap_hwmod *oh) { +int v; +/* The module mode does not exist prior OMAP4 */ -if (cpu_is_omap24xx () ||cpu_is_omap34xx ()) -return ; +if (!cpu_is_omap44xx ()) +return -EINVAL ;if (!oh->clkdm || !oh->prcm.omap4.modulemode) -return ; +return -EINVAL ; -pr_debug ("omap_hwmod: %s: _disable_module\n" , oh->name); +pr_debug ("omap_hwmod: %s: %s\n" , oh->name, __func__);omap4_cminst_module_disable (oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); + + v =_omap4_wait_target_disable (oh); +if (v) +pr_warn ("omap_hwmod: %s: _wait_target_disable failed\n" , + oh->name); + +return 0 ; }/**
@@ -1153,36 +1191,6 @@ static int _wait_target_ready(struct omap_hwmod *oh) }/** -* _wait_target_disable - wait for a module to be disabled -* @oh: struct omap_hwmod * -* -* Wait for a module @oh to enter slave idle. Returns 0 if the module -* does not have an IDLEST bit or if the module successfully enters -* slave idle; otherwise, pass along the return value of the -* appropriate *_cm*_wait_module_idle() function. -*/ -static int _wait_target_disable (struct omap_hwmod *oh) -{ -/* TODO: For now just handle OMAP4+ */ -if (cpu_is_omap24xx () ||cpu_is_omap34xx ()) -return 0 ; - -if (!oh) -return -EINVAL ; - -if (oh->_int_flags & _HWMOD_NO_MPU_PORT) -return 0 ; - -if (oh->flags &HWMOD_NO_IDLEST ) -return 0 ; - -return omap4_cminst_wait_module_idle (oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod
@@ -1543,8 +1551,6 @@ static int _enable(struct omap_hwmod *oh)*/ static int _idle (struct omap_hwmod *oh) { -int ret; -pr_debug ("omap_hwmod: %s: idling\n" , oh->name);if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -1556,11 +1562,9 @@ static int _idle(struct omap_hwmod *oh)if (oh->class->sysc)_idle_sysc (oh);_del_initiator_dep (oh, mpu_oh); -_disable_module (oh); - ret =_wait_target_disable (oh); -if (ret) -pr_warn ("omap_hwmod: %s: _wait_target_disable failed\n" , - oh->name); + +_omap4_disable_module (oh); +/* * The module must be in idle mode before disabling any parents * clocks. Otherwise, the parent clock might be disabled before
@@ -1661,11 +1665,7 @@ static int _shutdown(struct omap_hwmod *oh)if (oh->_state == _HWMOD_STATE_ENABLED) {_del_initiator_dep (oh, mpu_oh);/* XXX what about the other system initiators here? dma, dsp */ -_disable_module (oh); - ret =_wait_target_disable (oh); -if (ret) -pr_warn ("omap_hwmod: %s: _wait_target_disable failed\n" , - oh->name); +_omap4_disable_module (oh);_disable_clocks (oh);if (oh->clkdm)clkdm_hwmod_disable (oh->clkdm, oh);
Signature · 1 line
1.7.7.3
Tony Lindgren
maintainerPATCH v2 1/1 ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
Quoted 34 lines · Paul Walmsley
From: Benoit Cousson <[email protected]>
If the module does not have any modulemode, the
_disable_modulefunction will do nothing. There is then no point waiting for a idle status change.It will remove the following warnings.
[ 0.331848] omap_hwmod: dmm: _wait_target_disable failed [ 0.339935] omap_hwmod: emif_fw: _wait_target_disable failed [ 0.348358] omap_hwmod: l3_main_1: _wait_target_disable failed [ 0.356964] omap_hwmod: l3_main_2: _wait_target_disable failed [ 0.365600] omap_hwmod: l4_abe: _wait_target_disable failed [ 0.373931] omap_hwmod: l4_cfg: _wait_target_disable failed [ 0.382263] omap_hwmod: l4_per: _wait_target_disable failed [ 0.391113] omap_hwmod: l4_wkup: _wait_target_disable failed [ 0.399536] omap_hwmod: dma_system: _wait_target_disable failed [ 0.408325] omap_hwmod: dss_core: _wait_target_disable failed [ 0.416839] omap_hwmod: dss_dispc: _wait_target_disable failed [ 0.425445] omap_hwmod: dss_dsi1: _wait_target_disable failed [ 0.433990] omap_hwmod: dss_dsi2: _wait_target_disable failed [ 0.442504] omap_hwmod: dss_hdmi: _wait_target_disable failed [ 0.451019] omap_hwmod: dss_rfbi: _wait_target_disable failed [ 0.459564] omap_hwmod: dss_venc: _wait_target_disable failed [ 0.489471] omap_hwmod: mailbox: _wait_target_disable failed [ 0.505920] omap_hwmod: spinlock: _wait_target_disable failedNote: For such module, the state is managed automatically by HW according to clock domain transition. It is then not possible to wait for idle even later in the
_idlefunction since the status will change at clock domain boundary.Signed-off-by Benoit Cousson <[email protected]>Cc Paul Walmsley <[email protected]>Cc Rajendra Nayak <[email protected]>
Quoted 7 lines
[paul at pwsan.com: renamed fns to indicate that they are OMAP4-only; moved
_wait_target_disable()into_disable_module(), removing duplicate code]Signed-off-by Paul Walmsley <[email protected]>---
Should apply cleanly on top of "[PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init".
Applying into fixes-non-critical-part2, seems to merge fine with the patch above in the uart branch.
Regards,
Tony