bridge-utils: add
PATCH 1/9 bridge-utils: add
From: Zhenhua Luo <[email protected]>
bridge-utils provides tools for ethernet bridging.
--- .../bridge-utils/bridge-utils.inc | 30 +++ .../bridge-utils/bridge-utils_1.4.bb | 6 + .../bridge-utils/files/ifupdown.sh | 245 ++++++++++++++++++++ 3 files changed, 281 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils_1.4.bb create mode 100644 meta-oe/recipes-connectivity/bridge-utils/files/ifupdown.sh
meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc new file +30 -0
@@ -0,0 +1,30 @@ +DESCRIPTION = "Tools for ethernet bridging." +HOMEPAGE = "http://bridge.sourceforge.net/" +SECTION = "console/network" +LICENSE = "GPL" +DEPENDS = "sysfsutils" +RRECOMMENDS_${PN} = "kernel-module-bridge" + +SRC_URI = "${SOURCEFORGE_MIRROR}/bridge/bridge-utils-${PV}.tar.gz file://ifupdown.sh" + +inherit autotools + +EXTRA_OECONF = "--with-linux-headers=${STAGING_INCDIR}" + +do_install_append () { + mv ${D}${sbindir}/brctl ${D}${sbindir}/brctl.${PN} + install -d ${D}/${datadir}/bridge-utils + install -d ${D}/${sysconfdir}/network/if-pre-up.d + install -d ${D}/${sysconfdir}/network/if-post-down.d + install -m 0755 ${WORKDIR}/ifupdown.sh ${D}/${datadir}/bridge-utils/ + ln -s ${datadir}/bridge-utils/ifupdown.sh ${D}/${sysconfdir}/network/if-pre-up.d/bridge + ln -s ${datadir}/bridge-utils/ifupdown.sh ${D}/${sysconfdir}/network/if-post-down.d/bridge +} + +pkg_postinst_${PN} () { + update-alternatives --install ${sbindir}/brctl brctl brctl.${PN} 100 +} + +pkg_prerm_${PN} () { + update-alternatives --remove brctl brctl.${PN} +}
meta-oe/recipes-connectivity/bridge-utils/bridge-utils_1.4.bb new file +6 -0
@@ -0,0 +1,6 @@ +require bridge-utils.inc + +LIC_FILES_CHKSUM = "file://COPYING;md5=f9d20a453221a1b7e32ae84694da2c37" + +SRC_URI[md5sum] = "0182fcac3a2b307113bbec34e5f1c673" +SRC_URI[sha256sum] = "876975e9bcc302aa8b829161ea3348b12b9b879f1db0dc98feaed8d0e5dd5933"
meta-oe/recipes-connectivity/bridge-utils/files/ifupdown.sh new file +245 -0
245 lines not on this page · raw message
Signature · 1 line
1.7.0.4
PATCH 2/9 ietutils: add
From: Zhenhua Luo <[email protected]>
The GNU inetutils are a collection of common networking utilities and servers including ftp, ftpd, rcp, rexec, rlogin, rlogind, rsh, rshd, syslog, syslogd, talk, talkd, telnet, telnetd, tftp, tftpd, and uucpd.
--- .../inetutils/inetutils-1.8/fix-disable-ipv6.patch | 58 +++++++++++ ...tf-parse-pull-in-features.h-for-__GLIBC__.patch | 27 +++++ ...rgp-fix-program_invocation_name-detection.patch | 51 +++++++++ .../inetutils-1.8/inetutils-1.8-0003-wchar.patch | 12 ++ ...me-ruserpass-to-avoid-C-library-collision.patch | 58 +++++++++++ ...detect-__rcmd_errstr-support-in-the-C-lib.patch | 57 ++++++++++ ...e-daemon-from-the-C-library-when-possible.patch | 42 ++++++++ .../inetutils-1.8-1004-detect-fork-support.patch | 54 ++++++++++ ...-1.8-1005-ftpd-add-daemon-D-nommu-support.patch | 109 ++++++++++++++++++++ .../inetutils/inetutils_1.8.bb | 66 ++++++++++++ 10 files changed, 534 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/fix-disable-ipv6.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0001-printf-parse-pull-in-features.h-for-__GLIBC__.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0002-argp-fix-program_invocation_name-detection.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0003-wchar.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1001-ftp-rename-ruserpass-to-avoid-C-library-collision.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1002-rshd-detect-__rcmd_errstr-support-in-the-C-lib.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1003-use-daemon-from-the-C-library-when-possible.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1004-detect-fork-support.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1005-ftpd-add-daemon-D-nommu-support.patch create mode 100644 meta-oe/recipes-connectivity/inetutils/inetutils_1.8.bb
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/fix-disable-ipv6.patch new file +58 -0
@@ -0,0 +1,58 @@ +Upstream: http://www.mail-archive.com/[email protected]/msg02103.html + +diff -ur inetutils-1.8.orig/ping/ping_common.h inetutils-1.8/ping/ping_common.h +--- inetutils-1.8.orig/ping/ping_common.h 2010-05-15 20:55:47.000000000 +0930 ++++ inetutils-1.8/ping/ping_common.h 2010-12-01 12:19:08.000000000 +1030 +@@ -17,10 +17,14 @@ + You should have received a copy of the GNU General Public License + along with this program. If not, see `http://www.gnu.org/licenses/'. */ + ++#include <config.h> ++ + #include <netinet/in_systm.h> + #include <netinet/in.h> + #include <netinet/ip.h> ++#ifdef HAVE_IPV6 + #include <netinet/icmp6.h> ++#endif + #include <icmp.h> + #include <error.h> + #include <progname.h> +@@ -66,13 +70,19 @@ + (t).tv_usec = ((i)%PING_PRECISION)*(1000000/PING_PRECISION) ;\ + } while (0) + ++#ifdef HAVE_IPV6 + /* Not sure about this step*/ + #define _PING_BUFLEN(p, USE_IPV6) ((USE_IPV6)? ((p)->ping_datalen + sizeof (struct icmp6_hdr)) : \ + ((p)->ping_datalen + sizeof (icmphdr_t))) ++#else ++#define _PING_BUFLEN(p, USE_IPV6) ((p)->ping_datalen + sizeof (icmphdr_t)) ++#endif + ++#ifdef HAVE_IPV6 + typedef int (*ping_efp6) (int code, void *closure, struct sockaddr_in6 * dest, + struct sockaddr_in6 * from, struct icmp6_hdr * icmp, + int datalen); ++#endif + + typedef int (*ping_efp) (int code, + void *closure, +@@ -81,13 +91,17 @@ + struct ip * ip, icmphdr_t * icmp, int datalen); + + union event { ++#ifdef HAVE_IPV6 + ping_efp6 handler6; ++#endif + ping_efp handler; + }; + + union ping_address { + struct sockaddr_in ping_sockaddr; ++#ifdef HAVE_IPV6 + struct sockaddr_in6 ping_sockaddr6; ++#endif + }; + + typedef struct ping_data PING;
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0001-printf-parse-pull-in-features.h-for-__GLIBC__.patch new file +27 -0
@@ -0,0 +1,27 @@ +From 552a7d64ad4a7188a9b7cd89933ae7caf7ebfe90 Mon Sep 17 00:00:00 2001 +From: Mike Frysinger <vapier at gentoo.org> +Date: Thu, 18 Nov 2010 16:59:14 -0500 +Subject: [PATCH gnulib] printf-parse: pull in features.h for __GLIBC__ + +Signed-off-by: Mike Frysinger <vapier at gentoo.org> +--- + lib/printf-parse.h | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/lib/printf-parse.h b/lib/printf-parse.h +index 67a4a2a..3bd6152 100644 +--- a/lib/printf-parse.h ++++ b/lib/printf-parse.h +@@ -25,6 +25,9 @@ + + #include "printf-args.h" + ++#ifdef HAVE_FEATURES_H ++# include <features.h> /* for __GLIBC__ */ ++#endif + + /* Flags */ + #define FLAG_GROUP 1 /* ' flag */ +-- +1.7.3.2 +
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0002-argp-fix-program_invocation_name-detection.patch new file +51 -0
51 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-0003-wchar.patch new file +12 -0
@@ -0,0 +1,12 @@ +--- inetutils-1.8/lib/wchar.in.h ++++ inetutils-1.8/lib/wchar.in.h +@@ -70,6 +70,9 @@ + /* The include_next requires a split double-inclusion guard. */ + #if @HAVE_WCHAR_H@ + # @INCLUDE_NEXT@ @NEXT_WCHAR_H@ ++#else ++# include <stddef.h> ++# define MB_CUR_MAX 1 + #endif + + #undef _GL_ALREADY_INCLUDING_WCHAR_H
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1001-ftp-rename-ruserpass-to-avoid-C-library-collision.patch new file +58 -0
58 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1002-rshd-detect-__rcmd_errstr-support-in-the-C-lib.patch new file +57 -0
57 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1003-use-daemon-from-the-C-library-when-possible.patch new file +42 -0
42 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1004-detect-fork-support.patch new file +54 -0
54 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils-1.8/inetutils-1.8-1005-ftpd-add-daemon-D-nommu-support.patch new file +109 -0
109 lines not on this page · raw message
meta-oe/recipes-connectivity/inetutils/inetutils_1.8.bb new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 2/9] ietutils: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 11 lines
From: Zhenhua Luo <[email protected]>
The GNU inetutils are a collection of common networking utilities and servers including ftp, ftpd, rcp, rexec, rlogin, rlogind, rsh, rshd, syslog, syslogd, talk, talkd, telnet, telnetd, tftp, tftpd, and uucpd.
Signed-off-by Zhenhua Luo <[email protected]>+++ b/meta-oe/recipes-connectivity/inetutils/inetutils_1.8.bb @@ -0,0 +1,66 @@ +SECTION = "libs" +DEPENDS = "ncurses fakeroot-native" +LICENSE = "GPL"
That's not valid license, please include the version number, e.g. GPLv2 or GPLv2+
Quoted 4 lines
(quoted diff) +2
-0+DESCRIPTION = "The GNU inetutils are a collection of common \ +networking utilities and servers including ftp, ftpd, rcp, \ +rexec,rlogin, rlogind, rsh, rshd, syslog, syslogd, talk, \ +talkd, telnet, telnetd, tftp, tftpd, and uucpd."
Please move that to the top
Quoted 2 lines
+ +LIC_FILES_CHKSUM = "file://COPYING;md5=adefda309052235aa5d1e99ce7557010"
And move that next to LICENSE
Quoted 13 lines
+ +SRC_URI = "${GNU_MIRROR}/inetutils/inetutils-${PV}.tar.gz \ + file://inetutils-1.8-0001-printf-parse-pull-in-features.h-for-__GLIBC__.patch \ + file://inetutils-1.8-0002-argp-fix-program_invocation_name-detection.patch
\ + file://inetutils-1.8-0003-wchar.patch \ +
file://inetutils-1.8-1001-ftp-rename-ruserpass-to-avoid-C-library-collision.patch \ + file://inetutils-1.8-1002-rshd-detect-__rcmd_errstr-support-in-the-C-lib.patch \ + file://inetutils-1.8-1003-use-daemon-from-the-C-library-when-possible.patch
\ + file://inetutils-1.8-1004-detect-fork-support.patch \ +
file://inetutils-1.8-1005-ftpd-add-daemon-D-nommu-support.patch \ + file://fix-disable-ipv6.patch \ +" + +inherit autotools gettext +
Quoted 8 lines
+noipv6="${@base_contains('DISTRO_FEATURES', 'ipv6', '', '--disable-ipv6 gl_cv_socket_ipv6=no', d)}" +EXTRA_OECONF = "--with-ncurses-include-dir=${STAGING_INCDIR} \ +
--with-path-procnet-dev=/proc/net/dev \ + ${noipv6} \ + " +
+do_configure_prepend () { + export HELP2MAN='true' + cp
${STAGING_DATADIR_NATIVE}/gettext/config.rpath
${S}/build-aux/config.rpath + rm -f ${S}/glob/configure* +} + +fakerootdo_install() {
explicit fakeroot isn't needed anymore, pseudo always runs.
Quoted 20 lines
(quoted diff) +1
-0+ autotools_do_install + install -d ${D}${base_sbindir}${D}${base_bindir} + mv ${D}${bindir}/tftp ${D}${bindir}/tftp.${PN} + mv
${D}${bindir}/telnet ${D}${bindir}/telnet.${PN} + mv ${D}${bindir}/logger
${D}${bindir}/logger.${PN} + mv ${D}${bindir}/traceroute
${D}${bindir}/traceroute.${PN} + mv ${D}${bindir}/hostname
${D}${base_bindir}/hostname.${PN} + mv ${D}${bindir}/ifconfig
${D}${base_sbindir}/ifconfig.${PN} +} + +pkg_postinst_${PN} () { + update-alternatives --install ${bindir}/tftp tftp tftp.${PN} 100 + update-alternatives --install ${bindir}/telnet telnet telnet.${PN} 100 + update-alternatives --install ${bindir}/logger logger logger.${PN} 100 + update-alternatives --install ${bindir}/traceroute traceroute
traceroute.${PN} 100 + update-alternatives --install
${base_bindir}/hostname hostname hostname.${PN} 100 + update-alternatives
--install ${base_sbindir}/ifconfig ifconfig ifconfig.${PN} 100 +} +
+pkg_prerm_${PN} () { + update-alternatives --remove tftp tftp.${PN} +
update-alternatives --remove telnet telnet.${PN} + update-alternatives
--remove logger logger.${PN} + update-alternatives --remove traceroute
traceroute.${PN} + update-alternatives --remove ifconfig ifconfig.${PN}(quoted diff) +2
-0+} + +SRC_URI[md5sum] = "ad8fdcdf1797b9ca258264a6b04e48fd" +SRC_URI[sha256sum] =
Quoted 1 line
"
c8500baee04b9ea408c9e65e24ad7f5b41e7d96d42fb1d29abf25b52b68311c7"
Move those next to SRC_URI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q99kACgkQMkyGM64RGpFtqQCfeLWLjY8SuCe3eSSd8CabPyo0 SNYAn2f32eL5hwGnPC4P9T5CtrYlBCRt
=oxmn
-----END PGP SIGNATURE-----
PATCH 3/9 ipsec-tools: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
IPsec-Tools is a port of KAME's IPsec utilities to the Linux IPsec implementation.
--- .../ipsec-tools/files/ipsec-tools-install.patch | 14 +++++ .../recipes-support/ipsec-tools/ipsec-tools.inc | 52 ++++++++++++++++++++ .../ipsec-tools/ipsec-tools_0.7.2.bb | 11 ++++ 3 files changed, 77 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patch create mode 100644 meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc create mode 100644 meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb
meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patch new file +14 -0
@@ -0,0 +1,14 @@ +Taken from pld-linux.org: +http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/packages/ipsec-tools/ipsec-tools-install.patch + +--- ipsec-tools-0.7.2/src/racoon/Makefile.am~ 2008-07-23 13:48:40.000000000 +0200 ++++ ipsec-tools-0.7.2/src/racoon/Makefile.am 2009-07-04 01:43:48.148433975 +0200 +@@ -3,7 +3,7 @@ + sbin_PROGRAMS = racoon racoonctl plainrsa-gen + noinst_PROGRAMS = eaytest + include_racoon_HEADERS = racoonctl.h var.h vmbuf.h misc.h gcmalloc.h admin.h \ +- schedule.h sockmisc.h vmbuf.h isakmp_var.h isakmp.h isakmp_xauth.h \ ++ schedule.h sockmisc.h isakmp_var.h isakmp.h isakmp_xauth.h \ + isakmp_cfg.h isakmp_unity.h ipsec_doi.h evt.h + lib_LTLIBRARIES = libracoon.la +
meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc new file +52 -0
52 lines not on this page · raw message
meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb new file +11 -0
@@ -0,0 +1,11 @@ +PR = "${INC_PR}.1" + +require ipsec-tools.inc + +LIC_FILES_CHKSUM = "file://Makefile.in;endline=14;md5=c73d05590728997bfbab5c671ed38366" + +SRC_URI += "file://ipsec-tools-install.patch" +SRC_URI[ipsec-tools-0.7.2.md5sum] = "72861f005746ee27984b2ee715ecc629" +SRC_URI[ipsec-tools-0.7.2.sha256sum] = "08722ff6c62de3e042fef337454f03622a79053108d6dcc686c9c854f9f9e031" + +EXTRA_OECONF += " --disable-security-context"
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 3/9] ipsec-tools: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 16 lines
From: Zhenhua Luo <[email protected]>
IPsec-Tools is a port of KAME's IPsec utilities to the Linux IPsec implementation.
Signed-off-by Zhenhua Luo <[email protected]> ---.../ipsec-tools/files/ipsec-tools-install.patch | 14 +++++ .../recipes-support/ipsec-tools/ipsec-tools.inc | 52++++++++++++++++++++ .../ipsec-tools/ipsec-tools_0.7.2.bb |
11 ++++ 3 files changed, 77 insertions(+), 0 deletions(-) create mode 100644meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patchcreate mode 100644 meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc create mode 100644 meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb
Quoted 9 lines
diff --git
a/meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patchb/meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patchnew file mode 100644 index 0000000..6b9c39b ---/dev/null+++b/meta-oe/recipes-support/ipsec-tools/files/ipsec-tools-install.patch@@ -0,0 +1,14 @@ +Taken from pld-linux.org:
+http://cvs.pld-linux.org/cgi-bin/cvsweb.cgi/packages/ipsec-tools/ipsec-tools-install.patch
+
Quoted 18 lines
+--- ipsec-tools-0.7.2/src/racoon/Makefile.am~ 2008-07-23
13:48:40.000000000 +0200 ++++ ipsec-tools-0.7.2/src/racoon/Makefile.am2009-07-04 01:43:48.148433975 +0200 +@@ -3,7 +3,7 @@ + sbin_PROGRAMS =racoon racoonctl plainrsa-gen +
noinst_PROGRAMS= eaytest +include_racoon_HEADERS=racoonctl.hvar.hvmbuf.hmisc.hgcmalloc.hadmin.h\ +-schedule.hsockmisc.hvmbuf.hisakmp_var.hisakmp.hisakmp_xauth.h\ ++schedule.hsockmisc.hisakmp_var.hisakmp.hisakmp_xauth.h\ +isakmp_cfg.hisakmp_unity.hipsec_doi.hevt.h+lib_LTLIBRARIES= libracoon.la + diff --git a/meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc b/meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc new file mode 100644 index 0000000..fffb897 ---/dev/null+++ b/meta-oe/recipes-support/ipsec-tools/ipsec-tools.inc @@ -0,0 +1,52 @@(quoted diff) +2
-0+DESCRIPTION = "IPsec-Tools is a port of KAME's IPsec utilities to the \ +Linux-2.6 IPsec implementation." +HOMEPAGE ="http://ipsec-tools.sourceforge.net/" +SECTION = "console/network"
(quoted diff) +2
-0+LICENSE = "BSD" +DEPENDS = "virtual/kernel openssl readline flex" + +SRC_URI =
Quoted 3 lines
"${SOURCEFORGE_MIRROR}/ipsec-tools/ipsec-tools-${PV}.tar.bz2;name=ipsec-tools-${PV}"
+
Quoted 1 line
+INC_PR = "r3"
remove that
Quoted 25 lines
+ +inherit autotools + +# Options: +# --enable-adminport enable
admin port +# --enable-rc5 enable RC5 encryption (patented)
+# --enable-idea enable IDEA encryption (patented) +# --enable-gssapi
enable GSS-API authentication +# --enable-hybrid enable hybrid,
both mode-cfg and xauth support +# --enable-frag enable IKE
fragmentation payload support +# --enable-stats enable
statistics logging function +# --enable-dpd enable dead peer
detection +# --enable-samode-unspec enable to use unspecified a mode of
SA +# --disable-ipv6 disable ipv6 support +# --enable-natt
enable NAT-Traversal (yes/no/kernel) +# --enable-natt-versions=list list of supported NAT-T versions delimited by coma. +# --with-kernel-headers=/lib/modules/<uname>/build/include +# where your Linux Kernel headers are installed +# --with-readline
support readline input (yes by default) +# --with-flex use
directiory (default: no) +# --with-flexlib=<LIB> specify flex
library. +# --with-openssl=DIR specify OpenSSL directory +#
--with-libradius=DIR specify libradius path (like/usr/pkg) +#
--with-libpam=DIR specify libpam path (like/usr/pkg) +# +# Note: if
you give it the actual kernel headers it won't build, it actually +# needs to point at the linux-libc-headers version of the kernel headers.(quoted diff) +2
-1+# +EXTRA_OECONF = "--with-kernel-headers=${STAGING_INCDIR} \ + --with-readline \ + --with-openssl=${STAGING_LIBDIR}/.. \ + --without-libradius \ + --without-gssapi\ + --without-libpam" + +# See
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=530527 +CFLAGS +=
Quoted 8 lines
"-fno-strict-aliasing" + +# Sometimes it attempts to use
y.tab.cbefore it is actually +# generated. Note that the failure case is very rare, but it does +# happen. +PARALLEL_MAKE = "" diff --git a/meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb b/meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb new file mode 100644 index 0000000..e86f2cf ---/dev/null+++ b/meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb @@ -0,0 +1,11 @@ +PR = "${INC_PR}.1"
and remove thart
Quoted 7 lines
+ +require ipsec-tools.inc + +LIC_FILES_CHKSUM = "file://Makefile.in;endline=14;md5=c73d05590728997bfbab5c671ed38366" +
meta-oe/recipes-support/ipsec-tools/ipsec-tools_0.7.2.bb new file +3
-0+SRC_URI += "file://ipsec-tools-install.patch" +SRC_URI[ipsec-tools-0.7.2.md5sum] = "72861f005746ee27984b2ee715ecc629" +SRC_URI[ipsec-tools-0.7.2.sha256sum] ="
08722ff6c62de3e042fef337454f03622a79053108d6dcc686c9c854f9f9e031" + +EXTRA_OECONF += " --disable-security-context"
And put that in the .inc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+BYACgkQMkyGM64RGpGdggCePgqIdbPzcxHLdd2eNIH3t7FK XXsAoKixgiw8dMxscOXWLVx/IXk+CJk7
=GSxm
-----END PGP SIGNATURE-----
PATCH 4/9 libnfnetlink: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace.
--- .../libnfnetlink/libnfnetlink.inc | 15 +++++++++++++++ .../libnfnetlink/libnfnetlink_1.0.0.bb | 8 ++++++++ 2 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink.inc create mode 100644 meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb
meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink.inc new file +15 -0
@@ -0,0 +1,15 @@ +DESCRIPTION = "libnfnetlink is the low-level library for netfilter related \ +kernel/userspace communication. It provides a generic messaging \ +infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, \ +nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or \ +management tools in userspace." + +SECTION = "devel/libs" +LICENSE = "GPL" +HOMEPAGE = "http://www.netfilter.org/projects/libnfnetlink/index.html" +INC_PR = "r0" + +SRC_URI = "http://www.netfilter.org/projects/libnfnetlink/files/libnfnetlink-${PV}.tar.bz2;name=libnfnetlink-${PV}" + +inherit autotools pkgconfig +
meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb new file +8 -0
@@ -0,0 +1,8 @@ +include libnfnetlink.inc + +PR = "${INC_PR}.0" + +LIC_FILES_CHKSUM = "file://Makefile.in;endline=13;md5=a44bb8f4c22793d55c5e879eec256702" + +SRC_URI[libnfnetlink-1.0.0.md5sum] = "016fdec8389242615024c529acc1adb8" +SRC_URI[libnfnetlink-1.0.0.sha256sum] = "3752b03a4c09821ee9a2528d69289423a01e7171f1a22dfdd11d5459e03972fb"
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 4/9] libnfnetlink: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 17 lines
From: Zhenhua Luo <[email protected]>
libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as
nfnetlink_log,nfnetlink_queue,nfnetlink_conntrack) and their respective users and/or management tools in userspace.Signed-off-by Zhenhua Luo <[email protected]> ---.../libnfnetlink/libnfnetlink.inc | 15
+++++++++++++++ .../libnfnetlink/libnfnetlink_1.0.0.bb | 8
++++++++ 2 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink.inc create mode 100644 meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb(quoted diff) +0
-0
Quoted 9 lines
b/meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink.inc new file mode 100644 index 0000000..1862282 ---
/dev/null+++ b/meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink.inc @@ -0,0 +1,15 @@ +DESCRIPTION = "libnfnetlink is the low-level library for netfilter related \ +kernel/userspace communication. It provides a generic messaging \ +infrastructure for in-kernel netfilter subsystems (such asnfnetlink_log, \ +nfnetlink_queue,nfnetlink_conntrack) and their respective users and/or \ +management tools in userspace." + +SECTION = "devel/libs" +LICENSE = "GPL"
Not a valid license.
Quoted 5 lines
(quoted diff) +2
-0+HOMEPAGE = "http://www.netfilter.org/projects/libnfnetlink/index.html" +INC_PR = "r0" + +SRC_URI =
+
Quoted 11 lines
+inherit autotools pkgconfig + diff --git a/meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb b/meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb new file mode 100644 index 0000000..74decff ---
/dev/null+++ b/meta-oe/recipes-connectivity/libnfnetlink/libnfnetlink_1.0.0.bb @@ -0,0 +1,8 @@ +include libnfnetlink.inc + +PR = "${INC_PR}.0" + +LIC_FILES_CHKSUM = "file://Makefile.in;endline=13;md5=a44bb8f4c22793d55c5e879eec256702" +(quoted diff) +2
-0+SRC_URI[libnfnetlink-1.0.0.md5sum] = "016fdec8389242615024c529acc1adb8" +SRC_URI[libnfnetlink-1.0.0.sha256sum] ="
3752b03a4c09821ee9a2528d69289423a01e7171f1a22dfdd11d5459e03972fb"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+DQACgkQMkyGM64RGpFNiwCePUee3sI2WLe+WJ+8JmVp1yCJ t1cAn3M1uDICBFvXICg42yweQD8hI/F9
=pvvn
-----END PGP SIGNATURE-----
PATCH 5/9 nerperf: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
Network performance benchmark including tests for TCP, UDP, sockets, ATM and more.
--- .../recipes-benchmark/netperf/files/cpu_set.patch | 24 +++++++++ meta-oe/recipes-benchmark/netperf/files/init | 51 ++++++++++++++++++++ .../recipes-benchmark/netperf/files/vfork.patch | 26 ++++++++++ meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb | 47 ++++++++++++++++++ 4 files changed, 148 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-benchmark/netperf/files/cpu_set.patch create mode 100644 meta-oe/recipes-benchmark/netperf/files/init create mode 100755 meta-oe/recipes-benchmark/netperf/files/vfork.patch create mode 100644 meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb
meta-oe/recipes-benchmark/netperf/files/cpu_set.patch new file +24 -0
@@ -0,0 +1,24 @@ +Index: netperf-2.4.4/src/netlib.c +=================================================================== +--- netperf-2.4.4.orig/src/netlib.c 2007-10-17 23:16:02.000000000 +0200 ++++ netperf-2.4.4/src/netlib.c 2008-12-03 17:56:32.000000000 +0100 +@@ -1988,10 +1988,15 @@ + fall-back on what we had before, which is to use just the size of + an unsigned long. raj 2006-09-14 */ + +-#if defined(__CPU_SETSIZE) +-#define NETPERF_CPU_SETSIZE __CPU_SETSIZE +-#define NETPERF_CPU_SET(cpu, cpusetp) __CPU_SET(cpu, cpusetp) +-#define NETPERF_CPU_ZERO(cpusetp) __CPU_ZERO (cpusetp) ++#if defined(CPU_SETSIZE) ++#define NETPERF_CPU_SETSIZE CPU_SETSIZE ++#define NETPERF_CPU_SET(cpu, cpusetp) CPU_SET(cpu, cpusetp) ++#define NETPERF_CPU_ZERO(cpusetp) CPU_ZERO (cpusetp) ++ typedef cpu_set_t netperf_cpu_set_t; ++#elif defined(__CPU_SETSIZE) ++#define NETPERF_CPU_SETSIZE __CPU_SETSIZE ++#define NETPERF_CPU_SET(cpu, cpusetp) __CPU_SET (cpu, cpusetp) ++#define NETPERF_CPU_ZERO(cpusetp) __CPU_ZERO (cpusetp) + typedef cpu_set_t netperf_cpu_set_t; + #else + #define NETPERF_CPU_SETSIZE sizeof(unsigned long)
meta-oe/recipes-benchmark/netperf/files/init new file +51 -0
51 lines not on this page · raw message
meta-oe/recipes-benchmark/netperf/files/vfork.patch new file +26 -0
@@ -0,0 +1,26 @@ +--- netperf-2.4.4/src/netserver.c 2007-10-17 17:09:12.000000000 -0400 ++++ netperf-2.4.4.new/src/netserver.c 2011-01-23 12:26:39.000000000 -0500 +@@ -567,7 +567,11 @@ + fflush (stdin); + fflush (stdout); + fflush (stderr); ++#if defined(HAVE_FORK) + switch (fork()) ++#else ++ switch (vfork()) ++#endif + { + case -1: + perror("netperf server error"); +@@ -712,7 +716,11 @@ + #else + signal(SIGCLD, SIG_IGN); + ++#if defined(HAVE_FORK) + switch (fork()) ++#else ++ switch (vfork()) ++#endif + { + case -1: + /* something went wrong */
meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb new file +47 -0
47 lines not on this page · raw message
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 5/9] nerperf: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 11 lines
From: Zhenhua Luo <[email protected]>
Network performance benchmark including tests for TCP, UDP, sockets, ATM and more.
Signed-off-by Zhenhua Luo <[email protected]> ---+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +1,47 @@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 1 line
+PR = "r3"
remove that
Quoted 2 lines
+ +LIC_FILES_CHKSUM = "file://COPYING;md5=a0ab17253e7a3f318da85382c7d5d5d6"
Move next to LICENSE
Quoted 15 lines
+ +SRC_URI="ftp://ftp.netperf.org/netperf/archive/netperf-${PV}.tar.bz2
\ + file://cpu_set.patch \ + file://vfork.patch \ +
file://init" + +inherit update-rc.d autotools + +S = "${WORKDIR}/netperf-${PV}" + +# cpu_set.patch plus_GNU_SOURCEmakessrc/netlib.ccompile withCPU_macros +CFLAGS_append = " -DDO_UNIX
-DDO_IPV6 -D_GNU_SOURCE" + +do_install() { + install -d
${D}${sbindir} ${D}${bindir} ${D}${sysconfdir}/init.d + install -m
4755 src/netperf ${D}${bindir} + install -m 4755 src/netserver
${D}${sbindir} + install -m 0755 ${WORKDIR}/init
${D}${sysconfdir}/init.d/netperf + + # man + install -d
${D}${mandir}/man1/ + install -m 0644 doc/netserver.man
${D}${mandir}/man1/netserver.1 + install -m 0644 doc/netperf.man
${D}${mandir}/man1/netperf.1 + + # move scripts to examples
directory + install -d ${D}${docdir}/netperf/examples +
install -m 0644 doc/examples/*_script ${D}${docdir}/netperf/examples/ + +
Quoted 7 lines
# docs .. + install -m 0644 COPYING ${D}${docdir}/netperf +
install -m 0644 Release_Notes ${D}${docdir}/netperf + install -m
0644 README ${D}${docdir}/netperf + install -m 0644
doc/netperf_old.ps ${D}${docdir}/netperf +} + +INITSCRIPT_NAME="netperf"
+INITSCRIPT_PARAMS="defaults" + +SRC_URI[md5sum] =
"0e942f22864e601406a994420231075b" +SRC_URI[sha256sum] =
"28e76af491ea3696885e4558ae2f5628a4b9ebdbefc2f1d9cf1b35db2813e497"move next to SRC_URI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+JUACgkQMkyGM64RGpGGHQCgnou5F2Pjm9TDWEC55MbufJvg qTYAn0ooWerqftJ4JpElOvB96dTJWAb8
=L7Pg
-----END PGP SIGNATURE-----
Re: [PATCH meta-oe 5/9] nerperf: add
Hello Koen,
Quoted 5 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PM
Quoted 7 lines
Quoted 4 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +1,47 @@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
[Luo Zhenhua-B19537] May I know which license type should be with following COPYING content?
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.
The enclosed software and documentation includes copyrighted works of Hewlett-Packard Co. For as long as you comply with the following limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.
1. The enclosed software and documentation is made available at no charge in order to advance the general development of high-performance networking products.
2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
Best Regards,
Zhenhua
Re: [PATCH meta-oe 5/9] nerperf: add
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 7 lines
Hello Koen,
Quoted 5 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PM
Quoted 8 lines
Quoted 7 lines
Quoted 4 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +1,47 @@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
[Luo Zhenhua-B19537] May I know which license type should be with following COPYING content?
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
regards,
Koen
Quoted 46 lines
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.The enclosed software and documentation includes copyrighted works of Hewlett-Packard Co. For as long as you comply with the following limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.
1. The enclosed software and documentation is made available at no charge in order to advance the general development of high-performance networking products.
2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
Best Regards,
Zhenhua
Re: [PATCH meta-oe 5/9] nerperf: add
Quoted 17 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 14 lines
Hello Koen,
Quoted 12 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 4 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +1,47 @@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 3 lines
Quoted 1 line
[Luo Zhenhua-B19537] May I know which license type should be with following COPYING content?
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Quoted 60 lines
regards,
Koen
Quoted 42 lines
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.The enclosed software and documentation includes copyrighted works of Hewlett-Packard Co. For as long as you comply with the following limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.
1. The enclosed software and documentation is made available at no charge in order to advance the general development of high-performance networking products.
2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
Quoted 4 lines
Best Regards,
Zhenhua
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 1 line
-Khem
Re: [PATCH meta-oe 5/9] nerperf: add
Hello Khem,
Quoted 12 lines
-----Original Message-----
From: Khem Raj [mailto:[email protected]]
Sent: Saturday, December 17, 2011 5:55 AMQuoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +++ +1,47
@@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 7 lines
Quoted 1 line
Quoted 1 line
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
[Luo Zhenhua-B19537] Does this message mean netperf can't be included in meta-oe?
Quoted 36 lines
Quoted 36 lines
Quoted 36 lines
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.The enclosed software and documentation includes copyrighted works
of Hewlett-Packard Co. For as long as you comply with the following limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at no charge in order to advance the general development of high-performance networking products.
2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
Best Regards,
Zhenhua
Re: [PATCH meta-oe 5/9] nerperf: add
Quoted 2 lines · On Mon, Dec 19, 2011 at 1:52 AM, Luo Zhenhua-B19537 <[email protected]>…
Quoted 1 line
it says "for non-commercial purposes only"
[Luo Zhenhua-B19537] Does this message mean netperf can't be included in meta-oe?
INAL however I think if its being added for commercial use then probably not. But ark the legal folks.
Re: [PATCH meta-oe 5/9] nerperf: add
In reply to Khem RajQuoted 18 lines · Khem Raj
Quoted 17 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 14 lines
Hello Koen,
Quoted 12 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 4 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +1,47 @@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
[Luo Zhenhua-B19537] May I know which license type should be with following COPYING content?
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"
I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to add Netperf to the common-licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 70 lines
Quoted 57 lines
regards,
Koen
Quoted 42 lines
Copyright (C) 1993 Hewlett-Packard Company ALL RIGHTS RESERVED.
The enclosed software and documentation includes copyrighted works of Hewlett-Packard Co. For as long as you comply with the following limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.
1. The enclosed software and documentation is made available at no charge in order to advance the general development of high-performance networking products.
2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.
Quoted 4 lines
Best Regards,
Zhenhua
Quoted 4 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel--
-Khem_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 3 lines
Elizabeth Flanagan Yocto Project Build and Release
Re: [PATCH meta-oe 5/9] nerperf: add
Thanks for the feedback.
I saw netperf is licensed under "netperf" in oe http://cgit.openembedded.org/openembedded/plain/recipes/netperf/netperf_2.4.4.bb.
Anyway, I will send an email to the author to query about the license type.
Best Regards,
Zhenhua
Quoted 132 lines
-----Original Message-----
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Tuesday, December 20, 2011 6:32 AM
To: [email protected]; Luo Zhenhua-B19537
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: addQuoted 20 lines · Khem Raj
Quoted 19 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 16 lines
Hello Koen,
Quoted 14 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 5 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ -0,0 +++ +1,47
@@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 1 line
Quoted 1 line
Quoted 1 line
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 5 lines
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to add Netperf to the common- licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 67 lines
Quoted 60 lines
regards,
Koen
Quoted 45 lines
Copyright (C) 1993 Hewlett-Packard Company ALL RIGHTS RESERVED.
The enclosed software and documentation includes copyrighted works of Hewlett-Packard Co. For as long as you comply with the following
limitations, you are hereby authorized to (i) use, reproduce, and modify the software and documentation, and to (ii) distribute the software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at no
charge in order to advance the general development of high-performance networking products.2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least one of the copyright notices.
3. The enclosed software and documentation has not been subjected to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not offer a version of the software and documentation as a product.
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.Quoted 4 lines
Best Regards,
Zhenhua
Quoted 5 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-deve
lQuoted 7 lines
--
-Khem_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel--
Elizabeth Flanagan
Yocto Project
Build and Release
Re: [PATCH meta-oe 5/9] nerperf: add
In reply to Flanagan, ElizabethI have sent an email to [email protected] to query the appropriate license type yesterday and not response.
I'd like to adopt following option, does it make sense?
Quoted 1 line
Quoted 1 line
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"
Best Regards,
Zhenhua
Quoted 162 lines
-----Original Message-----
From: Luo Zhenhua-B19537
Sent: Tuesday, December 20, 2011 10:32 AM
To: [email protected]
Subject: RE: [oe] [PATCH meta-oe 5/9] nerperf: addThanks for the feedback.
I saw netperf is licensed under "netperf" in oe
http://cgit.openembedded.org/openembedded/plain/recipes/netperf/netperf_2.4.4.bb.Anyway, I will send an email to the author to query about the license type.
Best Regards,
Zhenhua
Quoted 144 lines
-----Original Message-----
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Tuesday, December 20, 2011 6:32 AM
To: [email protected]; Luo Zhenhua-B19537
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: addQuoted 21 lines · Khem Raj
Quoted 20 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 17 lines
Hello Koen,
Quoted 15 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 6 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ +++ -0,0
+++ +1,47
@@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 5 lines
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to add Netperf to the common- licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 76 lines
Quoted 68 lines
regards,
Koen
Quoted 53 lines
Copyright (C) 1993 Hewlett-Packard Company ALL RIGHTS RESERVED.
The enclosed software and documentation includes copyrighted works
of Hewlett-Packard Co. For as long as you comply with the following
limitations, you are hereby authorized to (i) use, reproduce, and
modify the software and documentation, and to (ii) distribute the
software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at no
charge in order to advance the general development of high-performance networking products.2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least
one of the copyright notices.3. The enclosed software and documentation has not been subjected
to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may not
offer a version of the software and documentation as a product.4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.Quoted 4 lines
Best Regards,
Zhenhua
Quoted 6 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-de
ve
lQuoted 8 lines
--
-Khem_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-dev
el--
Elizabeth Flanagan
Yocto Project
Build and Release
Re: [PATCH meta-oe 5/9] nerperf: add
Quoted 8 lines · On Tue, Dec 20, 2011 at 10:26 PM, Luo Zhenhua-B19537…
I have sent an email to [email protected] to query the appropriate license type yesterday and not response.
I'd like to adopt following option, does it make sense?
Quoted 1 line
Quoted 1 line
2. We'll need to add a Netperf license to common-licenses and set
LICENSE = "Netperf"
Yes, I agree. Although the Netperf license isn't really compatible with any OSI compliant license I know of and may cause end user problems. One option is to use Netperf 4 which is in fact GPL compliant. In that case it would be licensed as LICENSE = "GPL-2.0+"
If netperf 4 was equivalent from a functional standpoint, I'd go consider route, as the Netperf 2.x.x license can be problematic for some end users, I'm sure.
-b
Quoted 178 lines
Best Regards,
Zhenhua
Quoted 10 lines
-----Original Message-----
From: Luo Zhenhua-B19537
Sent: Tuesday, December 20, 2011 10:32 AM
To: [email protected]
Subject: RE: [oe] [PATCH meta-oe 5/9] nerperf: addThanks for the feedback.
I saw netperf is licensed under "netperf" in oe
http://cgit.openembedded.org/openembedded/plain/recipes/netperf/netperf_2.4.4.bb
.Quoted 2 lines
Anyway, I will send an email to the author to query about the license
type.
Quoted 16 lines
Best Regards,
Zhenhua
Quoted 10 lines
-----Original Message-----
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Tuesday, December 20, 2011 6:32 AM
To: [email protected]; Luo Zhenhua-B19537
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: addQuoted 3 lines · Khem Raj
Quoted 2 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende
geschreven:
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Hello Koen,
Quoted 6 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@ +++ -0,0
+++ +1,47
@@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION ="console/network"
Quoted 63 lines
Quoted 63 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
+HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 5 lines
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to add Netperf to the common- licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 34 lines
Quoted 34 lines
regards,
Koen
Quoted 27 lines
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.The enclosed software and documentation includes copyrighted
works
of Hewlett-Packard Co. For as long as you comply with the
following
limitations, you are hereby authorized to (i) use, reproduce,
and
modify the software and documentation, and to (ii) distribute
the
software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at
no
charge in order to advance the general development of high-performance networking products.2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at
least
one of the copyright notices.Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
3. The enclosed software and documentation has not been
subjected
to testing and quality control and is not a Hewlett-PackardCo.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
product. At a future time, Hewlett-Packard Co. may or may
not
offer a version of the software and documentation as aproduct.
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE
OR
DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR
ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
(INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE ORDOCUMENTATION.
Quoted 33 lines
Quoted 33 lines
Quoted 18 lines
Quoted 10 lines
Quoted 6 lines
Best Regards,
Zhenhua
Quoted 6 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-de
ve
lQuoted 8 lines
--
-Khem_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-dev
el--
Elizabeth Flanagan
Yocto Project
Build and Release
Signature · 3 lines
Elizabeth Flanagan Yocto Project Build and Release
Re: [PATCH meta-oe 5/9] nerperf: add
May I know which license type should be put in the recipe? LICENSE = "GPLv2+"
Or
LICENSE = "Netperf 4"
Best Regards,
Zhenhua
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Thursday, December 22, 2011 1:38 AM
To: Luo Zhenhua-B19537
Cc: [email protected]
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: add
On Tue, Dec 20, 2011 at 10:26 PM, Luo Zhenhua-B19537 <[email protected]<mailto:[email protected]>> wrote:
I have sent an email to [email protected]<mailto:[email protected]> to query the appropriate license type yesterday and not response.
I'd like to adopt following option, does it make sense?
Quoted 1 line
Quoted 1 line
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"
Yes, I agree. Although the Netperf license isn't really compatible with any OSI compliant license I know of and may cause end user problems. One option is to use Netperf 4 which is in fact GPL compliant. In that case it would be licensed as LICENSE = "GPL-2.0+"
If netperf 4 was equivalent from a functional standpoint, I'd go consider route, as the Netperf 2.x.x license can be problematic for some end users, I'm sure.
-b
Best Regards,
Zhenhua
Quoted 11 lines
-----Original Message-----
From: Luo Zhenhua-B19537
Sent: Tuesday, December 20, 2011 10:32 AM
To: [email protected]<mailto:[email protected]>
Subject: RE: [oe] [PATCH meta-oe 5/9] nerperf: addThanks for the feedback.
I saw netperf is licensed under "netperf" in oe
http://cgit.openembedded.org/openembedded/plain/recipes/netperf/netperf_2.4.4.bb.
Quoted 151 lines
Anyway, I will send an email to the author to query about the license type.
Best Regards,
Zhenhua
Quoted 144 lines
-----Original Message-----
From: Flanagan, Elizabeth [mailto:[email protected]<mailto:[email protected]>]
Sent: Tuesday, December 20, 2011 6:32 AM
To: [email protected]<mailto:[email protected]>; Luo Zhenhua-B19537
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: addQuoted 21 lines · On Fri, Dec 16, 2011 at 1:54 PM, Khem Raj…
Quoted 20 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 17 lines
Hello Koen,
Quoted 15 lines
-----Original Message-----
From: [email protected]<mailto:[email protected]> [mailto:openembedded-<mailto:openembedded-> [email protected]<mailto:[email protected]>] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 6 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb<http://netperf_2.4.4.bb> @@ +++ -0,0
+++ +1,47
@@ +DESCRIPTION="Network performance benchmark including tests
for TCP, UDP, sockets, ATM and more." +SECTION = "console/network" +HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 5 lines
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to add Netperf to the common- licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 76 lines
Quoted 68 lines
regards,
Koen
Quoted 53 lines
Copyright (C) 1993 Hewlett-Packard Company
ALL RIGHTS RESERVED.The enclosed software and documentation includes copyrighted
works
of Hewlett-Packard Co. For as long as you comply with the
following
limitations, you are hereby authorized to (i) use, reproduce,
and
modify the software and documentation, and to (ii) distribute
the
software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at
no
charge in order to advance the general development of high-performance networking products.2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at
least
one of the copyright notices.3. The enclosed software and documentation has not been
subjected
to testing and quality control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co. may or may
not
offer a version of the software and documentation as a product.4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE
OR
DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR
ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES
(INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.Quoted 4 lines
Best Regards,
Zhenhua
Quoted 6 lines
_______________________________________________
Openembedded-devel mailing list [email protected]<mailto:[email protected]>
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-de
ve
lQuoted 8 lines
--
-Khem_______________________________________________
Openembedded-devel mailing list [email protected]<mailto:[email protected]>
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-dev
el--
Elizabeth Flanagan
Yocto Project
Build and Release
--
Elizabeth Flanagan
Yocto Project
Build and Release
Re: [PATCH meta-oe 5/9] nerperf: add
Quoted 7 lines · On Wed, Dec 21, 2011 at 6:44 PM, Luo Zhenhua-B19537 <[email protected]>…
May I know which license type should be put in the recipe?
LICENSE = "GPLv2+"
Or
LICENSE = "Netperf 4"
No, what I meant was, look at the version of Netperf, called Netperf 4.
http://www.netperf.org/svn/netperf4/
It's license would be GPL-2.0+.
Quoted 237 lines
Best Regards,
Zhenhua
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Thursday, December 22, 2011 1:38 AM
To: Luo Zhenhua-B19537
Cc: [email protected]Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: add
On Tue, Dec 20, 2011 at 10:26 PM, Luo Zhenhua-B19537 <[email protected]> wrote:
I have sent an email to [email protected] to query the appropriate license type yesterday and not response.
I'd like to adopt following option, does it make sense?
Quoted 2 lines
Quoted 2 lines
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"
Yes, I agree. Although the Netperf license isn't really compatible with any OSI compliant license I know of and may cause end user problems. One option is to use Netperf 4 which is in fact GPL compliant. In that case it would be licensed as LICENSE = "GPL-2.0+"
If netperf 4 was equivalent from a functional standpoint, I'd go consider route, as the Netperf 2.x.x license can be problematic for some end users, I'm sure.
-b
Best Regards,
Zhenhua
Quoted 13 lines
-----Original Message-----
From: Luo Zhenhua-B19537
Sent: Tuesday, December 20, 2011 10:32 AM
To: [email protected]
Subject: RE: [oe] [PATCH meta-oe 5/9] nerperf: addThanks for the feedback.
I saw netperf is licensed under "netperf" in oe
http://cgit.openembedded.org/openembedded/plain/recipes/netperf/netperf_2.4.4.bb.
Quoted 162 lines
Anyway, I will send an email to the author to query about the license type.
Best Regards,
Zhenhua
Quoted 154 lines
-----Original Message-----
From: Flanagan, Elizabeth [mailto:[email protected]]
Sent: Tuesday, December 20, 2011 6:32 AM
To: [email protected]; Luo Zhenhua-B19537
Subject: Re: [oe] [PATCH meta-oe 5/9] nerperf: addQuoted 23 lines · Khem Raj
Quoted 22 lines · Koen Kooi
Op 16 dec. 2011, om 10:19 heeft Luo Zhenhua-B19537 het volgende geschreven:
Quoted 18 lines
Hello Koen,
Quoted 16 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:52 PMQuoted 9 lines
+++ b/meta-oe/recipes-benchmark/netperf/netperf_2.4.4.bb @@
+++ -0,0
+++ +1,47@@ +DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more." +SECTION = "console/network"
+HOMEPAGE = "http://www.netperf.org/" +LICENSE = "netperf"Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
Can you include a comment on what type of license netperf is? MIT like, BSD like, GPL like?
[Luo Zhenhua-B19537] May I know which license type should be with following
COPYING content?
Quoted 5 lines
Quoted 3 lines
That looks like a BSD or MIT derivative, maybe Beth can give us some guidance on what to use as LICENSE
it says "for non-commercial purposes only"
Yeah.... in this case, I would do one of two things (and I have a feeling one will be more valid that the other):
1. Email the author and see if we can use BSD-4-Clause. My guess is no.
2. We'll need to add a Netperf license to common-licenses and set LICENSE = "Netperf"I've checked the openSuSE Build Service and they have this as an "Other" license, so, check with the author first, but be prepared to
add Netperf to the common- licenses directory.
And yes, Koen is right. I wouldn't use BSD or MIT for this, specifically because of the non-commercial clause in (ii).
-b
Quoted 79 lines
Quoted 71 lines
regards,
Koen
Quoted 56 lines
Copyright (C) 1993 Hewlett-Packard Company ALL RIGHTS RESERVED.
The enclosed software and documentation includes copyrighted works
of Hewlett-Packard Co. For as long as you comply with the following
limitations, you are hereby authorized to (i) use, reproduce, and
modify the software and documentation, and to (ii) distribute the
software and documentation, including modifications, for non-commercial purposes only.1. The enclosed software and documentation is made available at no
charge in order to advance the general development of high-performance networking products.2. You may not delete any copyright notices contained in the software or documentation. All hard copies, and copies in source code or object code form, of the software or documentation (including modifications) must contain at least
one of the copyright notices.3. The enclosed software and documentation has not been subjected
to testing and quality control and is not a Hewlett-Packard Co.
product. At a future time, Hewlett-Packard Co. may or may not
offer a version of the software and documentation as a product.4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.5. HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFITS) RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE OR DOCUMENTATION.Quoted 4 lines
Best Regards,
Zhenhua
Quoted 6 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-de
ve
lQuoted 8 lines
--
-Khem_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-dev
el--
Elizabeth Flanagan
Yocto Project
Build and Release--
Elizabeth Flanagan
Yocto Project
Build and Release
Signature · 3 lines
Elizabeth Flanagan Yocto Project Build and Release
PATCH 6/9 ptpd: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
Precision Time Protocol (PTP) as defined by the IEEE 1588 standard.
--- .../ptpd/ptpd-1.0.0/add-limit-h.patch | 26 ++++++++++++++++++++ meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb | 21 ++++++++++++++++ 2 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch create mode 100644 meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb
meta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch new file +26 -0
@@ -0,0 +1,26 @@ +ptpd: fix ftbfs by including limits.h so MAX_INT defined + +The current recipe for ptpd fails to build with: + +| arith.c: In function 'fromInternalTime': +| arith.c:46: error: 'INT_MAX' undeclared (first use in this function) +| arith.c:46: error: (Each undeclared identifier is reported only once +| arith.c:46: error: for each function it appears in.) +| arith.c: In function 'toInternalTime': +| arith.c:64: error: 'INT_MAX' undeclared (first use in this function) +| make: *** [arith.o] Error 1 +| make: *** Waiting for unfinished jobs.... +| FATAL: oe_runmake failed + +diff --git a/src/arith.c b/src/arith.c +--- a/src/arith.c ++++ b/src/arith.c +@@ -1,6 +1,7 @@ + /* arith.c */ + + #include "ptpd.h" ++#include <limits.h> + + /* from annex C of the spec */ + UInteger32 crc_algorithm(Octet *buf, Integer16 length) +
meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb new file +21 -0
@@ -0,0 +1,21 @@ +DESCRIPTION = "Precision Time Protocol (PTP) as defined by the IEEE 1588 standard" +HOMEPAGE = "http://sourceforge.net/projects/ptpd" +LICENSE = "BSD" +SECTION = "network" +PR = "r1" + +LIC_FILES_CHKSUM = "file://../COPYRIGHT;md5=888bd1b2c9c013b93394b8bfb453c417" + +SRC_URI = "http://downloads.sourceforge.net/project/ptpd/ptpd/${PV}/ptpd-${PV}.tar.gz \ + file://add-limit-h.patch;striplevel=2" + +S = "${WORKDIR}/ptpd-${PV}/src" + +do_install() { + install -d ${D}${bindir} ${D}${mandir}/man8 + install -m 4555 ptpd ${D}${bindir} + install -m 644 ptpd.8 ${D}${mandir}/man8 +} + +SRC_URI[md5sum] = "b112b2bedc7f6e6e11a838608b9e0357" +SRC_URI[sha256sum] = "8ac1fdcad1e246b0395097dd9af29966c6823533d7e6989aae91506048fb51bc"
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 6/9] ptpd: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 6 lines
From: Zhenhua Luo <[email protected]>
Precision Time Protocol (PTP) as defined by the IEEE 1588 standard.
Signed-off-by Zhenhua Luo <[email protected]> ---
Quoted 7 lines
(quoted diff) +0
-0b/meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb new file mode 100644 index 0000000..a9c0351 ---
/dev/null+++ b/meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb @@ -0,0 +1,21 @@ +DESCRIPTION = "Precision Time Protocol (PTP) as defined by the IEEE 1588 standard" +HOMEPAGE = "http://sourceforge.net/projects/ptpd" +LICENSE = "BSD" +SECTION = "network" +PR = "r1"
remove that
Quoted 2 lines
+ +LIC_FILES_CHKSUM = "file://../COPYRIGHT;md5=888bd1b2c9c013b93394b8bfb453c417"
move that next to LICENSE
Quoted 8 lines
+ +SRC_URI = "http://downloads.sourceforge.net/project/ptpd/ptpd/${PV}/ptpd-${PV}.tar.gz
\ + file://add-limit-h.patch;striplevel=2" + +S =
"${WORKDIR}/ptpd-${PV}/src" + +do_install() { + install -d
${D}${bindir} ${D}${mandir}/man8 + install -m 4555 ptpd
${D}${bindir} + install -m 644 ptpd.8 ${D}${mandir}/man8 +} +
+SRC_URI[md5sum] = "b112b2bedc7f6e6e11a838608b9e0357" +SRC_URI[sha256sum] = "8ac1fdcad1e246b0395097dd9af29966c6823533d7e6989aae91506048fb51bc"
move those next to SRC_URI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+LwACgkQMkyGM64RGpF1BQCeKzk8hQ6wwmP8059rerGkKD78 fJUAoIQZTtlHXlTkDlZ7c9XEROAvEwt5
=KpUq
-----END PGP SIGNATURE-----
Re: [PATCH meta-oe 6/9] ptpd: add
In reply to [email protected]Quoted 18 lines · On (16/12/11 10:39), [email protected] wrote:
From: Zhenhua Luo <[email protected]>
Precision Time Protocol (PTP) as defined by the IEEE 1588 standard.
Signed-off-by Zhenhua Luo <[email protected]>--- .../ptpd/ptpd-1.0.0/add-limit-h.patch | 26 ++++++++++++++++++++ meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bb | 21 ++++++++++++++++ 2 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch create mode 100644 meta-oe/recipes-connectivity/ptpd/ptpd_1.0.0.bbmeta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch new file +0
-0
meta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch line 1
Quoted 1 line
meta-oe/recipes-connectivity/ptpd/ptpd-1.0.0/add-limit-h.patch new file +1
-0@@ -0,0 +1,26 @@ +ptpd: fix ftbfs by including limits.h so MAX_INT defined
^^^^^^^
should be INT_MAX
PATCH 7/9 strongswan: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
strongSwan is an OpenSource IPsec implementation for the Linux operating system.
--- .../recipes-support/strongswan/strongswan_4.5.1.bb | 23 ++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/strongswan/strongswan_4.5.1.bb
meta-oe/recipes-support/strongswan/strongswan_4.5.1.bb new file +23 -0
@@ -0,0 +1,23 @@ +SECTION = "console/network" +DESCRIPTION = "strongSwan is an OpenSource IPsec implementation for the \ +Linux operating system." +HOMEPAGE = "http://www.strongswan.org" +LICENSE = "GPLv2" +DEPENDS = "gmp openssl flex-native flex bison-native" +RRECOMMENDS_${PN} = "kernel-module-ipsec" +PR = "r0" + +LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3" + +SRC_URI = "http://download.strongswan.org/strongswan-${PV}.tar.bz2" + +EXTRA_OECONF = "--disable-curl --disable-soup --disable-ldap \ + --enable-gmp --disable-mysql --disable-sqlite \ + --enable-openssl" + +inherit autotools + +FILES_${PN}-dbg += "${libexecdir}/ipsec/.debug ${libexecdir}/ipsec/plugins/.debug" + +SRC_URI[md5sum] = "81a4a699c4a1a49b74061dfa47b5a033" +SRC_URI[sha256sum] = "252d7369d94aa2d79e6fad078853b07ca897ea811ab1e1a2b008bcec0d1e758a"
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 7/9] strongswan: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 12 lines
From: Zhenhua Luo <[email protected]>
strongSwan is an OpenSource IPsec implementation for the Linux operating system.
Signed-off-by Zhenhua Luo <[email protected]> ---.../recipes-support/strongswan/strongswan_4.5.1.bb | 23
++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/strongswan/strongswan_4.5.1.bb(quoted diff) +0
-0
Quoted 8 lines
b/meta-oe/recipes-support/strongswan/strongswan_4.5.1.bb new file mode 100644 index 0000000..a692637 ---
/dev/null+++ b/meta-oe/recipes-support/strongswan/strongswan_4.5.1.bb @@ -0,0 +1,23 @@ +SECTION = "console/network" +DESCRIPTION = "strongSwan is an OpenSource IPsec implementation for the \ +Linux operating system." +HOMEPAGE = "http://www.strongswan.org" +LICENSE = "GPLv2" +DEPENDS = "gmp openssl flex-native flex bison-native" +RRECOMMENDS_${PN} = "kernel-module-ipsec"
Move below do_install
Quoted 1 line
+PR = "r0"
drop
Quoted 2 lines
+LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3"
move next to LICENSE
Quoted 7 lines
(quoted diff) +3
-1+SRC_URI = "http://download.strongswan.org/strongswan-${PV}.tar.bz2" + +EXTRA_OECONF = "--disable-curl --disable-soup --disable-ldap \ + --enable-gmp --disable-mysql --disable-sqlite \ + --enable-openssl" + +inherit autotools + +FILES_${PN}-dbg += "${libexecdir}/ipsec/.debug${libexecdir}/ipsec/plugins/.debug" + +SRC_URI[md5sum] = "
81a4a699c4a1a49b74061dfa47b5a033" +SRC_URI[sha256sum] = "252d7369d94aa2d79e6fad078853b07ca897ea811ab1e1a2b008bcec0d1e758a"
move next to SRC_URI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+OcACgkQMkyGM64RGpF9qgCgiJ5vKcsCyiFm1/T8xVCfkNhW LBUAn1vqptZ1/neJw2xpdBi4MlIR2d21
=Tbw5
-----END PGP SIGNATURE-----
PATCH 8/9 rng-tools: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
Random number generator daemo.
--- meta-oe/recipes-support/rng-tools/files/default | 2 + meta-oe/recipes-support/rng-tools/files/init | 49 ++++++++++++++++++++++ meta-oe/recipes-support/rng-tools/rng-tools_2.bb | 28 ++++++++++++ 3 files changed, 79 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/rng-tools/files/default create mode 100755 meta-oe/recipes-support/rng-tools/files/init create mode 100644 meta-oe/recipes-support/rng-tools/rng-tools_2.bb
meta-oe/recipes-support/rng-tools/files/default new file +2 -0
@@ -0,0 +1,2 @@ +# Specify rng device +RNG_DEVICE=/dev/hwrng
meta-oe/recipes-support/rng-tools/files/init new file +49 -0
50 lines not on this page · raw message
meta-oe/recipes-support/rng-tools/rng-tools_2.bb new file +28 -0
@@ -0,0 +1,28 @@ +DESCRIPTION = "Random number generator daemon" +LICENSE = "GPL" +DEPENDS_append_libc-uclibc = " argp-standalone" +PR = "r4" + +LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f" + +SRC_URI = "http://heanet.dl.sourceforge.net/sourceforge/gkernel/${P}.tar.gz \ + file://init \ + file://default" + +inherit autotools update-rc.d + +INITSCRIPT_NAME = "rng-tools" +INITSCRIPT_PARAMS = "defaults" + +do_install_append() { + install -d "${D}${sysconfdir}/init.d" + install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/rng-tools + sed -i -e 's,/etc/,${sysconfdir}/,' -e 's,/usr/sbin/,${sbindir},' \ + ${D}${sysconfdir}/init.d/rng-tools + + install -d "${D}${sysconfdir}/default" + install -m 0644 ${WORKDIR}/default ${D}${sysconfdir}/default +} + +SRC_URI[md5sum] = "63d503191eabed630324c104cc024475" +SRC_URI[sha256sum] = "1126f0ecc8cab3af14a562cddc5d8ffeef47df7eba34a7aadcdee35a25ec2b1e"
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 8/9] rng-tools: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 36 lines
From: Zhenhua Luo <[email protected]>
Random number generator daemo.
Signed-off-by Zhenhua Luo <[email protected]> ---meta-oe/recipes-support/rng-tools/files/default | 2 +
meta-oe/recipes-support/rng-tools/files/init | 49
++++++++++++++++++++++ meta-oe/recipes-support/rng-tools/rng-tools_2.bb | 28 ++++++++++++ 3 files changed, 79 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/rng-tools/files/default create mode 100755 meta-oe/recipes-support/rng-tools/files/init create mode 100644 meta-oe/recipes-support/rng-tools/rng-tools_2.bb(quoted diff) +0
-0b/meta-oe/recipes-support/rng-tools/files/default new file mode 100644 index 0000000..ab7cd93 ---
/dev/null+++ b/meta-oe/recipes-support/rng-tools/files/default @@ -0,0 +1,2 @@ +# Specify rng device +RNG_DEVICE=/dev/hwrng diff --git a/meta-oe/recipes-support/rng-tools/files/init b/meta-oe/recipes-support/rng-tools/files/init new file mode 100755 index 0000000..5fa5959 ---/dev/null+++ b/meta-oe/recipes-support/rng-tools/files/init @@ -0,0 +1,49 @@ +#!/bin/sh+# +# This is an init script for openembedded +# Copy it to/etc/init.d/rng-toolsand type +# > update-rc.d rng-tools defaults 60 +#
+ +rngd=/usr/sbin/rngd +test -x "$rngd" || exit 1 + +if [ -e/etc/default/rng-tools]; then + ./etc/default/rng-tools+fi + +if [(quoted diff) +1
-1-n "$RNG_DEVICE" ]; then + EXTRA_ARGS="-- -r $RNG_DEVICE" +fi + + +case "$1" in + start) + echo -n "Starting random number generatordaemon" + start-stop-daemon -S -q -x $rngd $EXTRA_ARGS + echo "." +
;; + stop) + echo -n "Stopping random number generator daemon" +
start-stop-daemon -K -q -n rngd + echo "." + ;; +
reload|force-reload) + echo -n "Signalling rng daemon restart" +
start-stop-daemon -K -q -s 1 -x $rngd + start-stop-daemon -K -q -s 1
-x $rngd + ;; + restart) + echo -n "Stopping random number
generator daemon" + start-stop-daemon -K -q -n rngd + echo "." +
echo -n "Starting random number generator daemon" + start-stop-daemon
Quoted 8 lines
-S -q -x $rngd $EXTRA_ARGS + echo "." + ;; + *) + echo "Usage:
/etc/init.d/rng-tools{start|stop|reload|restart|force-reload}" + exit
1 +esac + +exit 0 \ No newline at end of file diff --git a/meta-oe/recipes-support/rng-tools/rng-tools_2.bb b/meta-oe/recipes-support/rng-tools/rng-tools_2.bb new file mode 100644 index 0000000..fc6c8ab ---/dev/null+++ b/meta-oe/recipes-support/rng-tools/rng-tools_2.bb @@ -0,0 +1,28 @@ +DESCRIPTION = "Random number generator daemon" +LICENSE = "GPL"
not a valid license
Quoted 1 line
+DEPENDS_append_libc-uclibc = " argp-standalone" +PR = "r4"
drop
Quoted 2 lines
+ +LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
move next to LICENSE
Quoted 5 lines
+ +SRC_URI = "http://heanet.dl.sourceforge.net/sourceforge/gkernel/${P}.tar.gz \ +
file://init \ + file://default" + +inherit autotools
update-rc.d + +INITSCRIPT_NAME = "rng-tools" +INITSCRIPT_PARAMS = "defaults"
move below do_install
Quoted 8 lines
+ +do_install_append() { + install -d "${D}${sysconfdir}/init.d" +
install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/rng-tools + sed -i -e 's,/etc/,${sysconfdir}/,' -e 's,/usr/sbin/,${sbindir},' \ +
${D}${sysconfdir}/init.d/rng-tools + + install -d
"${D}${sysconfdir}/default" + install -m 0644 ${WORKDIR}/default
${D}${sysconfdir}/default +} + +SRC_URI[md5sum] = "63d503191eabed630324c104cc024475" +SRC_URI[sha256sum] = "1126f0ecc8cab3af14a562cddc5d8ffeef47df7eba34a7aadcdee35a25ec2b1e"
move next to SRC_URI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+REACgkQMkyGM64RGpEleQCeLpiC3BmucY+EXjYuN9DrG/Ed C8IAnA1qpgRM9BKaHkTyv0kD1XQHB8o0
=thLO
-----END PGP SIGNATURE-----
PATCH 9/9 xfsprogs: add
In reply to [email protected]From: Zhenhua Luo <[email protected]>
xfsprogs provides XFS filesystem utilities.
--- meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb | 43 ++++++++++++++++++++ 1 files changed, 43 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb
meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb new file +43 -0
@@ -0,0 +1,43 @@ +DESCRIPTION = "XFS Filesystem Utilities" +HOMEPAGE = "http://oss.sgi.com/projects/xfs" +LICENSE = "GPL" +SECTION = "base" +DEPENDS = "util-linux" + +LIC_FILES_CHKSUM = "file://Makefile;endline=3;md5=def2844770bb44eba37bc9ca8610fad4" + +SRC_URI = "ftp://oss.sgi.com/projects/xfs/cmd_tars/${P}.tar.gz" +SRC_URI[md5sum] = "049cf9873794ea49d0bb3f12d45748a4" +SRC_URI[sha256sum] = "e150914210ac5fd29c098ef0fd94bdec51d2fb231cf9faa765c16ec6d75c8eaa" + +PARALLEL_MAKE = "" +inherit autotools +EXTRA_OECONF = "--enable-gettext=no" +LIBTOOL = "${HOST_SYS}-libtool" +EXTRA_OEMAKE = "'LIBTOOL=${LIBTOOL}'" +TARGET_CC_ARCH += "${LDFLAGS}" + +FILES_${PN}-dev += "${base_libdir}/libhandle.la \ + ${base_libdir}/libhandle.so" + +do_configure () { + export DEBUG="-DNDEBUG" + oe_runconf +} + +do_install () { + export DIST_ROOT=${D} + oe_runmake install + # needed for xfsdump + oe_runmake install-dev + # replace extra links to /usr/lib with relative links (otherwise autotools_prepackage_lamangler fails to read nonexistent link) + rm -f ${D}/${base_libdir}/libhandle.la + rm -f ${D}/${base_libdir}/libhandle.a + ln -s ../usr/lib/libhandle.la ${D}/${base_libdir}/libhandle.la + ln -s ../usr/lib/libhandle.a ${D}/${base_libdir}/libhandle.a + + # and link from /usr/lib/libhandle.so to /lib/libhandle.so + rm -f ${D}/${libdir}/libhandle.so + ln -s ../../lib/libhandle.a ${D}/${libdir}/libhandle.so +} +
Signature · 1 line
1.7.0.4
Re: [PATCH meta-oe 9/9] xfsprogs: add
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 9 lines
From: Zhenhua Luo <[email protected]>
xfsprogs provides XFS filesystem utilities.
Signed-off-by Zhenhua Luo <[email protected]> ---meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb | 43
++++++++++++++++++++ 1 files changed, 43 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb
Quoted 6 lines
(quoted diff) +0
-0b/meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb new file mode 100644 index 0000000..07644ac ---
/dev/null+++ b/meta-oe/recipes-support/xfsprogs/xfsprogs_3.1.7.bb @@ -0,0 +1,43 @@ +DESCRIPTION = "XFS Filesystem Utilities" +HOMEPAGE = "http://oss.sgi.com/projects/xfs" +LICENSE = "GPL"
not a valid license
Quoted 2 lines
+SECTION = "base" +DEPENDS = "util-linux" + +LIC_FILES_CHKSUM = "file://Makefile;endline=3;md5=def2844770bb44eba37bc9ca8610fad4"
move next to LICENSE
Quoted 4 lines
+ +SRC_URI = "ftp://oss.sgi.com/projects/xfs/cmd_tars/${P}.tar.gz" +SRC_URI[md5sum] = "
049cf9873794ea49d0bb3f12d45748a4" +SRC_URI[sha256sum] = "e150914210ac5fd29c098ef0fd94bdec51d2fb231cf9faa765c16ec6d75c8eaa" + +PARALLEL_MAKE = ""
move below inherit autotools
Quoted 5 lines
+inherit autotools +EXTRA_OECONF = "--enable-gettext=no" +LIBTOOL = "${HOST_SYS}-libtool" +EXTRA_OEMAKE = "'LIBTOOL=${LIBTOOL}'" +TARGET_CC_ARCH += "${LDFLAGS}" + +FILES_${PN}-dev += "${base_libdir}/libhandle.la \ + ${base_libdir}/libhandle.so"
Move below do_install
Quoted 10 lines
+ +do_configure () { + export DEBUG="-DNDEBUG" +
oe_runconf+} +
+do_install () { + export DIST_ROOT=${D} +oe_runmakeinstall + # needed
for xfsdump +oe_runmakeinstall-dev + # replace extra links to/usr/lib
with relative links (otherwiseautotools_prepackage_lamanglerfails to
read nonexistent link) + rm -f ${D}/${base_libdir}/libhandle.la + rm -f
${D}/${base_libdir}/libhandle.a + ln -s ../usr/lib/libhandle.la
${D}/${base_libdir}/libhandle.la + ln -s ../usr/lib/libhandle.a
${D}/${base_libdir}/libhandle.a + + # and link from/usr/lib/libhandle.so
to/lib/libhandle.so+ rm -f ${D}/${libdir}/libhandle.so + ln -s
../../lib/libhandle.a ${D}/${libdir}/libhandle.so +} +
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q+T4ACgkQMkyGM64RGpGJBgCcDoVQ7+QAiUlcHgBtZRtU9atm dKgAoLUGquZFtXaU9Xfy3nztzqsg3Ou6
=92fE
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 16-12-11 03:39, [email protected] schreef:
Quoted 15 lines
From: Zhenhua Luo <[email protected]>
bridge-utils provides tools for ethernet bridging.
Signed-off-by Zhenhua Luo <[email protected]> ---.../bridge-utils/bridge-utils.inc | 30 +++ .../bridge-utils/bridge-utils_1.4.bb | 6 + .../bridge-utils/files/ifupdown.sh | 245++++++++++++++++++++ 3 files changed, 281 insertions(+), 0 deletions(-) create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils_1.4.bb create mode 100644
meta-oe/recipes-connectivity/bridge-utils/files/ifupdown.sh
Quoted 7 lines
(quoted diff) +0
-0b/meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc new file mode 100644 index 0000000..5ac6c83 ---
/dev/null+++ b/meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc @@ -0,0 +1,30 @@ +DESCRIPTION = "Tools for ethernet bridging." +HOMEPAGE = "http://bridge.sourceforge.net/" +SECTION = "console/network" +LICENSE = "GPL"
That's not a valid license
Quoted 1 line
+DEPENDS = "sysfsutils" +RRECOMMENDS_${PN} = "kernel-module-bridge"
That needs to move below do_install. Does it also need ifupdown? Patch looks OK otherwise.
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: GPGTools - http://gpgtools.org
iEYEARECAAYFAk7q9zcACgkQMkyGM64RGpFR3QCfes5gKH1Jk36n80JUJGUoa1nO DWsAn1aWYMXjieT5K+xmiwEdACL6Ln+5
=RPWd
-----END PGP SIGNATURE-----
Quoted 36 lines
-----Original Message-----
From: [email protected] [mailto:openembedded- [email protected]] On Behalf Of Koen Kooi
Sent: Friday, December 16, 2011 3:46 PM
To: [email protected]
Subject: Re: [oe] [PATCH meta-oe 1/9] bridge-utils: add-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Op 16-12-11 03:39, [email protected] schreef:
Quoted 16 lines
From: Zhenhua Luo <[email protected]>
bridge-utils provides tools for ethernet bridging.
Signed-off-by Zhenhua Luo <[email protected]> ---.../bridge-utils/bridge-utils.inc | 30 +++ .../bridge-utils/bridge-utils_1.4.bb | 6 + .../bridge-utils/files/ifupdown.sh | 245++++++++++++++++++++ 3 files changed, 281 insertions(+), 0 ++++++++++++++++++++ deletions(-)
create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc create mode 100644 meta-oe/recipes-connectivity/bridge-utils/bridge-utils_1.4.bb create mode 100644meta-oe/recipes-connectivity/bridge-utils/files/ifupdown.shQuoted 8 lines
diff --git a/meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc b/meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc new file mode 100644 index 0000000..5ac6c83 ---
/dev/null+++ b/meta-oe/recipes-connectivity/bridge-utils/bridge-utils.inc @@ -0,0 +1,30 @@ +DESCRIPTION = "Tools for ethernet bridging." +HOMEPAGE = "http://bridge.sourceforge.net/" +SECTION = "console/network" +LICENSE = "GPL"
Quoted 1 line
That's not a valid license
[Luo Zhenhua-B19537] The LICENSE is GPLv2, I will correct it in v2 patch
Quoted 3 lines
Quoted 1 line
+DEPENDS = "sysfsutils" +RRECOMMENDS_${PN} = "kernel-module-bridge"
That needs to move below
do_install. Does it also need ifupdown?
[Luo Zhenhua-B19537] ifupdown.sh is not needed, it will be dropped in v2 patch.
Best Regards,
Zhenhua