s3c-hsudc: regulator handling and a lot of fixes

index a9eee53..018338a 100644
@@ -50,6 +50,7 @@
 #include <plat/nand.h>
 #include <plat/sdhci.h>
 #include <plat/udc.h>
+#include <linux/usb/s3c-hsudc.h>
 
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>

index 4ca8b57..5468723 100644
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
+#include <linux/usb/s3c-hsudc.h>
 
 #include <asm/irq.h>
 #include <asm/pmu.h>

index 8c22d58..de8e228 100644
@@ -37,20 +37,7 @@ struct s3c2410_udc_mach_info {
 
 extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
 
-/**
- * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
- * @epnum: Number of endpoints to be instantiated by the controller driver.
- * @gpio_init: Platform specific USB related GPIO initialization.
- * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
- *
- * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
- * controllers.
- */
-struct s3c24xx_hsudc_platdata {
-	unsigned int	epnum;
-	void		(*gpio_init)(void);
-	void		(*gpio_uninit)(void);
-};
+struct s3c24xx_hsudc_platdata;
 
 extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
 

index 6f2a041..4c1abb1 100644
@@ -28,9 +28,9 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/prefetch.h>
+#include <linux/usb/s3c-hsudc.h>
 
 #include <mach/regs-s3c2443-clock.h>
-#include <plat/udc.h>
 
 #define S3C_HSUDC_REG(x)	(x)
 

new file mode 100644
index 0000000..6fa1093
@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */

index 4c1abb1..3e5673d 100644
@@ -1260,7 +1260,7 @@ static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 
-static int s3c_hsudc_probe(struct platform_device *pdev)
+static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct resource *res;

index 3e5673d..6c2b2ce 100644
@@ -1366,6 +1366,9 @@ err_remap:
 	kfree(hsudc->mem_rsrc);
 
 err_res:
+	if (hsudc->transceiver)
+		otg_put_transceiver(hsudc->transceiver);
+
 	kfree(hsudc);
 	return ret;
 }

index 6c2b2ce..42bcd97 100644
@@ -1156,11 +1156,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 	hsudc->driver = driver;
 	hsudc->gadget.dev.driver = &driver->driver;
 	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
-	ret = device_add(&hsudc->gadget.dev);
-	if (ret) {
-		dev_err(hsudc->dev, "failed to probe gadget device");
-		return ret;
-	}
 
 	ret = bind(&hsudc->gadget);
 	if (ret) {

@@ -1180,8 +1175,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 					hsudc->gadget.name);
 			driver->unbind(&hsudc->gadget);
 
-			device_del(&hsudc->gadget.dev);
-
 			hsudc->driver = NULL;
 			hsudc->gadget.dev.driver = NULL;
 			return ret;

@@ -1222,7 +1215,6 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 		(void) otg_set_peripheral(hsudc->transceiver, NULL);
 
 	driver->unbind(&hsudc->gadget);
-	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
 
 	dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",

@@ -1307,7 +1299,6 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&hsudc->lock);
 
-	device_initialize(&hsudc->gadget.dev);
 	dev_set_name(&hsudc->gadget.dev, "gadget");
 
 	hsudc->gadget.max_speed = USB_SPEED_HIGH;

@@ -1348,12 +1339,20 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	disable_irq(hsudc->irq);
 	local_irq_enable();
 
+	ret = device_register(&hsudc->gadget.dev);
+	if (ret) {
+		put_device(&hsudc->gadget.dev);
+		goto err_add_device;
+	}
+
 	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
 	if (ret)
 		goto err_add_udc;
 
 	return 0;
 err_add_udc:
+	device_unregister(&hsudc->gadget.dev);
+err_add_device:
 	clk_disable(hsudc->uclk);
 	clk_put(hsudc->uclk);
 err_clk:

index 42bcd97..daaccec 100644
@@ -282,8 +282,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
  * All the endpoints are stopped and any pending transfer requests if any on
  * the endpoint are terminated.
  */
-static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
-			  struct usb_gadget_driver *driver)
+static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
 {
 	struct s3c_hsudc_ep *hsep;
 	int epnum;

@@ -295,10 +294,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
 		hsep->stopped = 1;
 		s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 	}
-
-	spin_unlock(&hsudc->lock);
-	driver->disconnect(&hsudc->gadget);
-	spin_lock(&hsudc->lock);
 }
 
 /**

@@ -1135,16 +1130,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
 	return IRQ_HANDLED;
 }
 
-static int s3c_hsudc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int s3c_hsudc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
 	struct s3c_hsudc *hsudc = the_controller;
 	int ret;
 
 	if (!driver
 		|| driver->max_speed < USB_SPEED_FULL
-		|| !bind
-		|| !driver->unbind || !driver->disconnect || !driver->setup)
+		|| !driver->setup)
 		return -EINVAL;
 
 	if (!hsudc)

@@ -1155,17 +1149,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 
 	hsudc->driver = driver;
 	hsudc->gadget.dev.driver = &driver->driver;
-	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
-
-	ret = bind(&hsudc->gadget);
-	if (ret) {
-		dev_err(hsudc->dev, "%s: bind failed\n", hsudc->gadget.name);
-		device_del(&hsudc->gadget.dev);
-
-		hsudc->driver = NULL;
-		hsudc->gadget.dev.driver = NULL;
-		return ret;
-	}
 
 	/* connect to bus through transceiver */
 	if (hsudc->transceiver) {

@@ -1173,8 +1156,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		if (ret) {
 			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
 					hsudc->gadget.name);
-			driver->unbind(&hsudc->gadget);
-
 			hsudc->driver = NULL;
 			hsudc->gadget.dev.driver = NULL;
 			return ret;

@@ -1192,7 +1173,8 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 	return 0;
 }
 
-static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
+static int s3c_hsudc_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
 	struct s3c_hsudc *hsudc = the_controller;
 	unsigned long flags;

@@ -1200,21 +1182,22 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 	if (!hsudc)
 		return -ENODEV;
 
-	if (!driver || driver != hsudc->driver || !driver->unbind)
+	if (!driver || driver != hsudc->driver)
 		return -EINVAL;
 
 	spin_lock_irqsave(&hsudc->lock, flags);
-	hsudc->driver = 0;
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 	s3c_hsudc_uninit_phy();
 	if (hsudc->pd->gpio_uninit)
 		hsudc->pd->gpio_uninit();
-	s3c_hsudc_stop_activity(hsudc, driver);
+	s3c_hsudc_stop_activity(hsudc);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
 	if (hsudc->transceiver)
 		(void) otg_set_peripheral(hsudc->transceiver, NULL);
 
-	driver->unbind(&hsudc->gadget);
 	disable_irq(hsudc->irq);
 
 	dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",

@@ -1247,8 +1230,8 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
-	.start		= s3c_hsudc_start,
-	.stop		= s3c_hsudc_stop,
+	.udc_start	= s3c_hsudc_start,
+	.udc_stop	= s3c_hsudc_stop,
 	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 

@@ -1310,6 +1293,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 
 	hsudc->gadget.is_otg = 0;
 	hsudc->gadget.is_a_peripheral = 0;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	s3c_hsudc_setup_ep(hsudc);
 

index daaccec..d6544f6 100644
@@ -29,6 +29,7 @@
 #include <linux/usb/otg.h>
 #include <linux/prefetch.h>
 #include <linux/usb/s3c-hsudc.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/regs-s3c2443-clock.h>
 

@@ -87,6 +88,12 @@
 #define DATA_STATE_XMIT			(1)
 #define DATA_STATE_RECV			(2)
 
+static const char * const s3c_hsudc_supply_names[] = {
+	"vdda",		/* analog phy supply, 3.3V */
+	"vddi",		/* digital phy supply, 1.2V */
+	"vddosc",	/* oscillator supply, 1.8V - 3.3V */
+};
+
 /**
  * struct s3c_hsudc_ep - Endpoint representation used by driver.
  * @ep: USB gadget layer representation of device endpoint.

@@ -139,6 +146,7 @@ struct s3c_hsudc {
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
 	struct otg_transceiver *transceiver;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;

@@ -1150,15 +1158,20 @@ static int s3c_hsudc_start(struct usb_gadget *g,
 	hsudc->driver = driver;
 	hsudc->gadget.dev.driver = &driver->driver;
 
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
+				    hsudc->supplies);
+	if (ret != 0) {
+		dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
 	/* connect to bus through transceiver */
 	if (hsudc->transceiver) {
 		ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
 		if (ret) {
 			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
 					hsudc->gadget.name);
-			hsudc->driver = NULL;
-			hsudc->gadget.dev.driver = NULL;
-			return ret;
+			goto err_otg;
 		}
 	}
 

@@ -1171,6 +1184,12 @@ static int s3c_hsudc_start(struct usb_gadget *g,
 		hsudc->pd->gpio_init();
 
 	return 0;
+err_otg:
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
+	hsudc->driver = NULL;
+	hsudc->gadget.dev.driver = NULL;
+	return ret;
 }
 
 static int s3c_hsudc_stop(struct usb_gadget *g,

@@ -1200,6 +1219,8 @@ static int s3c_hsudc_stop(struct usb_gadget *g,
 
 	disable_irq(hsudc->irq);
 
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+
 	dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;

@@ -1241,7 +1262,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct s3c_hsudc *hsudc;
 	struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
-	int ret;
+	int ret, i;
 
 	hsudc = kzalloc(sizeof(struct s3c_hsudc) +
 			sizeof(struct s3c_hsudc_ep) * pd->epnum,

@@ -1258,6 +1279,16 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 
 	hsudc->transceiver = otg_get_transceiver();
 
+	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
+		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+				 hsudc->supplies);
+	if (ret != 0) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");

@@ -1352,6 +1383,8 @@ err_res:
 	if (hsudc->transceiver)
 		otg_put_transceiver(hsudc->transceiver);
 
+	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
 	kfree(hsudc);
 	return ret;
 }

index d6544f6..af1e700 100644
@@ -1376,9 +1376,7 @@ err_irq:
 	iounmap(hsudc->regs);
 
 err_remap:
-	release_resource(hsudc->mem_rsrc);
-	kfree(hsudc->mem_rsrc);
-
+	release_mem_region(res->start, resource_size(res));
 err_res:
 	if (hsudc->transceiver)
 		otg_put_transceiver(hsudc->transceiver);