s3c-hsudc: regulator handling and a lot of fixes
Subsystems (4)
v4 cover s3c-hsudc: regulator handling and a lot of fixes
In his response to the first submission Felipe Balbi asked to also move the driver to the new udc_start and udc_stop functions and to make an effort to reduce dependencies on archictecture code.
v3 of the series does not try to provide a remove function, due to the possible lifetime problem of gadget.dev found by Russel King.
v4 also gets rid of the the_controller global and uses container_of instead and moves the platform-data header to include/linux/platform_data.
The first patch reduces the number of arch dependencies by one by moving the platform data struct to a header unter include/linux/usb.
The fourth and fifth patches implement the move to udc_start / udc_stop
And the sixt patch finally allows the s3c-hsudc driver to control its supplying regulators as intended in the first place.
The regulator calls can use the regulators unconditionally and let necessary "stubbing and mapping" happen through the regulator framework, according to for example
http://marc.info/?l=linux-netdev&m=131914562120725&w=2
meaning there is no need to gracefully fail if a regulator is not present.
Each patch was compile-tested individually, the series applies cleanly against linux-next from 2011-12-16.
Real-life testing happened on S3C2416 hardware.
Heiko Stuebner (8):
s3c-hsudc: move platform_data struct to global header
s3c-hsudc: add __devinit to probe function
s3c-hsudc: add missing otg_put_transceiver in probe
s3c-hsudc: move device registration to probe
s3c-hsudc: use udc_start and udc_stop functions
s3c-hsudc: Add regulator handling
s3c-hsudc: use release_mem_region instead of release_resource
s3c-hsudc: remove the_controller global
arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +---- drivers/usb/gadget/s3c-hsudc.c | 120 +++++++++++++++++------------- include/linux/platform_data/s3c-hsudc.h | 34 +++++++++ 5 files changed, 106 insertions(+), 65 deletions(-) create mode 100644 include/linux/platform_data/s3c-hsudc.h
Signature · 1 line
1.7.2.3
PATCH v4 1/8 s3c-hsudc: move platform_data struct to global header
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code.
--- arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +------------ drivers/usb/gadget/s3c-hsudc.c | 2 +- include/linux/platform_data/s3c-hsudc.h | 34 ++++++++++++++++++++++++++++++ 5 files changed, 38 insertions(+), 15 deletions(-) create mode 100644 include/linux/platform_data/s3c-hsudc.h
arch/arm/mach-s3c2416/mach-smdk2416.c +1 -0
@@ -50,6 +50,7 @@#include <plat/nand.h> #include <plat/sdhci.h> #include <plat/udc.h> +#include <linux/platform_data/s3c-hsudc.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h>
arch/arm/plat-samsung/devs.c +1 -0
@@ -29,6 +29,7 @@#include <linux/mtd/partitions.h> #include <linux/mmc/host.h> #include <linux/ioport.h> +#include <linux/platform_data/s3c-hsudc.h> #include <asm/irq.h> #include <asm/pmu.h>
arch/arm/plat-samsung/include/plat/udc.h +1 -14
@@ -37,20 +37,7 @@ struct s3c2410_udc_mach_info {extern void __init s3c24xx_udc_set_platdata (struct s3c2410_udc_mach_info *); -/** -* s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. -* @epnum: Number of endpoints to be instantiated by the controller driver. -* @gpio_init: Platform specific USB related GPIO initialization. -* @gpio_uninit: Platform specific USB releted GPIO uninitialzation. -* -* Representation of platform data for the S3C24XX USB 2.0 High Speed gadget -* controllers. -*/ -struct s3c24xx_hsudc_platdata { -unsigned int epnum; -void (*gpio_init)(void ); -void (*gpio_uninit)(void ); -}; +struct s3c24xx_hsudc_platdata ;extern void __init s3c24xx_hsudc_set_platdata (struct s3c24xx_hsudc_platdata *pd);
drivers/usb/gadget/s3c-hsudc.c +1 -1
@@ -28,9 +28,9 @@#include <linux/usb/gadget.h> #include <linux/usb/otg.h> #include <linux/prefetch.h> +#include <linux/platform_data/s3c-hsudc.h> #include <mach/regs-s3c2443-clock.h> -#include <plat/udc.h> #define S3C_HSUDC_REG (x) (x)
include/linux/platform_data/s3c-hsudc.h new file +34 -0
@@ -0,0 +1,34 @@ +/* +* S3C24XX USB 2.0 High-speed USB controller gadget driver +* +* Copyright (c) 2010 Samsung Electronics Co., Ltd. +* http://www.samsung.com/ +* +* The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. +* Each endpoint can be configured as either in or out endpoint. Endpoints +* can be configured for Bulk or Interrupt transfer mode. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSUDC_H +#define __LINUX_USB_S3C_HSUDC_H + +/** +* s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. +* @epnum: Number of endpoints to be instantiated by the controller driver. +* @gpio_init: Platform specific USB related GPIO initialization. +* @gpio_uninit: Platform specific USB releted GPIO uninitialzation. +* +* Representation of platform data for the S3C24XX USB 2.0 High Speed gadget +* controllers. +*/ +struct s3c24xx_hsudc_platdata { +unsigned int epnum; +void (*gpio_init)(void ); +void (*gpio_uninit)(void ); +}; + +#endif /* __LINUX_USB_S3C_HSUDC_H */
Signature · 1 line
1.7.2.3
PATCH 1/8 s3c-hsudc: move platform_data struct to global header
Hi,
Quoted 8 lines · Heiko St?bner
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code.
Signed-off-by Heiko Stuebner <[email protected]>--- arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +------------
I would like to have ack from Ben and/or Kukjin before applying this one. Ben are you ok with this patch ?
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111220/d9343b33/attachment.sig>
PATCH v4 1/8 s3c-hsudc: move platform_data struct to global header
Am Dienstag, 20. Dezember 2011, 12:25:00 schrieb Felipe Balbi:
Quoted 9 lines
Hi,
Quoted 6 lines · Heiko St?bner
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code.
Signed-off-by Heiko Stuebner <[email protected]>---
Quoted 6 lines
Quoted 3 lines
arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +------------I would like to have ack from Ben and/or Kukjin before applying this one. Ben are you ok with this patch ?
I think Kukjin does more acking if this stuff currently, so hopefully he will see this mail.
Heiko
PATCH 1/8 s3c-hsudc: move platform_data struct to global header
Quoted 11 lines · Heiko St?bner
Am Dienstag, 20. Dezember 2011, 12:25:00 schrieb Felipe Balbi:
Quoted 9 lines
Hi,
Quoted 6 lines · Heiko St?bner
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code.
Signed-off-by Heiko Stuebner <[email protected]>---
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +------------I would like to have ack from Ben and/or Kukjin before applying this one. Ben are you ok with this patch ?
I think Kukjin does more acking if this stuff currently, so hopefully he will see this mail.
Hi Felipe,
Looks ok to me, you can go ahead with my ack.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH 1/8 s3c-hsudc: move platform_data struct to global header
Quoted 18 lines · Kukjin Kim
Quoted 17 lines · Heiko St?bner
Am Dienstag, 20. Dezember 2011, 12:25:00 schrieb Felipe Balbi:
Quoted 15 lines
Hi,
Quoted 9 lines · Heiko St?bner
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code.
Signed-off-by Heiko Stuebner <[email protected]>---
arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + arch/arm/plat-samsung/devs.c | 1 + arch/arm/plat-samsung/include/plat/udc.h | 15 +------------I would like to have ack from Ben and/or Kukjin before applying this one. Ben are you ok with this patch ?
Quoted 8 lines
Quoted 3 lines
I think Kukjin does more acking if this stuff currently, so hopefully he will see this mail.
Hi Felipe,
Looks ok to me, you can go ahead with my ack.
Acked-by Kukjin Kim <[email protected]>
Thanks.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111221/59212d2c/attachment.sig>
PATCH v4 2/8 s3c-hsudc: add __devinit to probe function
In reply to Heiko StübnerFixes possible section mismatch warnings.
--- drivers/usb/gadget/s3c-hsudc.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +1 -1
@@ -1260,7 +1260,7 @@ static struct usb_gadget_ops s3c_hsudc_gadget_ops = { .vbus_draw = s3c_hsudc_vbus_draw, }; -static int s3c_hsudc_probe (struct platform_device *pdev) +static int __devinit s3c_hsudc_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct resource *res;
Signature · 1 line
1.7.2.3
PATCH v4 3/8 s3c-hsudc: add missing otg_put_transceiver in probe
In reply to Heiko StübnerThe number of get and put calls should always be equal.
--- drivers/usb/gadget/s3c-hsudc.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +3 -0
@@ -1366,6 +1366,9 @@ err_remap:kfree (hsudc->mem_rsrc); err_res: +if (hsudc->transceiver) +otg_put_transceiver (hsudc->transceiver); +kfree (hsudc);return ret; }
Signature · 1 line
1.7.2.3
PATCH v4 4/8 s3c-hsudc: move device registration to probe
In reply to Heiko StübnerInstead of adding and deleting the gadget device in the start and stop invocations. Use device_register in the probe method to initialize and add the gadget device.
--- drivers/usb/gadget/s3c-hsudc.c | 17 ++++++++--------- 1 files changed, 8 insertions(+), 9 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +8 -9
@@ -1156,11 +1156,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, hsudc->driver = driver; hsudc->gadget.dev.driver = &driver->driver; hsudc->gadget.speed =USB_SPEED_UNKNOWN ; - ret =device_add (&hsudc->gadget.dev); -if (ret) { -dev_err (hsudc->dev,"failed to probe gadget device" ); -return ret; - } ret =bind (&hsudc->gadget);if (ret) {
@@ -1180,8 +1175,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, hsudc->gadget.name); driver->unbind (&hsudc->gadget); -device_del (&hsudc->gadget.dev); - hsudc->driver =NULL ; hsudc->gadget.dev.driver =NULL ;return ret;
@@ -1222,7 +1215,6 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver) (void )otg_set_peripheral (hsudc->transceiver,NULL ); driver->unbind (&hsudc->gadget); -device_del (&hsudc->gadget.dev);disable_irq (hsudc->irq); dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
@@ -1307,7 +1299,6 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)spin_lock_init (&hsudc->lock); -device_initialize (&hsudc->gadget.dev);dev_set_name (&hsudc->gadget.dev,"gadget" ); hsudc->gadget.max_speed =USB_SPEED_HIGH ;
@@ -1348,12 +1339,20 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)disable_irq (hsudc->irq);local_irq_enable (); + ret =device_register (&hsudc->gadget.dev); +if (ret) { +put_device (&hsudc->gadget.dev); + goto err_add_device; + } + ret =usb_add_gadget_udc (&pdev->dev, &hsudc->gadget);if (ret) goto err_add_udc;return 0 ; err_add_udc: +device_unregister (&hsudc->gadget.dev); +err_add_device:clk_disable (hsudc->uclk);clk_put (hsudc->uclk); err_clk:
Signature · 1 line
1.7.2.3
PATCH v4 5/8 s3c-hsudc: use udc_start and udc_stop functions
In reply to Heiko Stübnerudc_start and udc_stop reduce code duplication in comparison to start and stop generalising calls done by all drivers (i.e. bind and unbind) and moving these calls to common code.
--- drivers/usb/gadget/s3c-hsudc.c | 44 ++++++++++++--------------------------- 1 files changed, 14 insertions(+), 30 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +14 -30
@@ -282,8 +282,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)* All the endpoints are stopped and any pending transfer requests if any on * the endpoint are terminated. */ -static void s3c_hsudc_stop_activity (struct s3c_hsudc *hsudc, -struct usb_gadget_driver *driver) +static void s3c_hsudc_stop_activity (struct s3c_hsudc *hsudc) {struct s3c_hsudc_ep *hsep;int epnum;
@@ -295,10 +294,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc, hsep->stopped =1 ;s3c_hsudc_nuke_ep (hsep, -ESHUTDOWN ); } - -spin_unlock (&hsudc->lock); - driver->disconnect (&hsudc->gadget); -spin_lock (&hsudc->lock); }/**
@@ -1135,16 +1130,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)return IRQ_HANDLED ; } -static int s3c_hsudc_start (struct usb_gadget_driver *driver, -int (*bind)(struct usb_gadget *)) +static int s3c_hsudc_start (struct usb_gadget *gadget, +struct usb_gadget_driver *driver) {struct s3c_hsudc *hsudc = the_controller;int ret;if (!driver || driver->max_speed <USB_SPEED_FULL - || !bind - || !driver->unbind || !driver->disconnect || !driver->setup) + || !driver->setup)return -EINVAL ;if (!hsudc)
@@ -1155,17 +1149,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, hsudc->driver = driver; hsudc->gadget.dev.driver = &driver->driver; - hsudc->gadget.speed =USB_SPEED_UNKNOWN ; - - ret =bind (&hsudc->gadget); -if (ret) { -dev_err (hsudc->dev,"%s: bind failed\n" , hsudc->gadget.name); -device_del (&hsudc->gadget.dev); - - hsudc->driver =NULL ; - hsudc->gadget.dev.driver =NULL ; -return ret; - }/* connect to bus through transceiver */ if (hsudc->transceiver) {
@@ -1173,8 +1156,6 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,if (ret) {dev_err (hsudc->dev,"%s: can't bind to transceiver\n" , hsudc->gadget.name); - driver->unbind (&hsudc->gadget); - hsudc->driver =NULL ; hsudc->gadget.dev.driver =NULL ;return ret;
@@ -1192,7 +1173,8 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,return 0 ; } -static int s3c_hsudc_stop (struct usb_gadget_driver *driver) +static int s3c_hsudc_stop (struct usb_gadget *gadget, +struct usb_gadget_driver *driver) {struct s3c_hsudc *hsudc = the_controller;unsigned long flags;
@@ -1200,21 +1182,22 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)if (!hsudc)return -ENODEV ; -if (!driver || driver != hsudc->driver || !driver->unbind) +if (!driver || driver != hsudc->driver)return -EINVAL ;spin_lock_irqsave (&hsudc->lock, flags); - hsudc->driver =0 ; + hsudc->driver =NULL ; + hsudc->gadget.dev.driver =NULL ; + hsudc->gadget.speed =USB_SPEED_UNKNOWN ;s3c_hsudc_uninit_phy ();if (hsudc->pd->gpio_uninit) hsudc->pd->gpio_uninit (); -s3c_hsudc_stop_activity (hsudc, driver); +s3c_hsudc_stop_activity (hsudc);spin_unlock_irqrestore (&hsudc->lock, flags);if (hsudc->transceiver) (void )otg_set_peripheral (hsudc->transceiver,NULL ); - driver->unbind (&hsudc->gadget);disable_irq (hsudc->irq); dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
@@ -1247,8 +1230,8 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)static struct usb_gadget_ops s3c_hsudc_gadget_ops = { .get_frame = s3c_hsudc_gadget_getframe, - .start = s3c_hsudc_start, - .stop = s3c_hsudc_stop, + .udc_start = s3c_hsudc_start, + .udc_stop = s3c_hsudc_stop, .vbus_draw = s3c_hsudc_vbus_draw, };
@@ -1310,6 +1293,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) hsudc->gadget.is_otg =0 ; hsudc->gadget.is_a_peripheral =0 ; + hsudc->gadget.speed =USB_SPEED_UNKNOWN ;s3c_hsudc_setup_ep (hsudc);
Signature · 1 line
1.7.2.3
PATCH 5/8 s3c-hsudc: use udc_start and udc_stop functions
Hi,
Quoted 35 lines · Heiko St?bner
udc_startandudc_stopreduce code duplication in comparison to start and stop generalising calls done by all drivers (i.e. bind and unbind) and moving these calls to common code.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/usb/gadget/s3c-hsudc.c | 44 ++++++++++++--------------------------- 1 files changed, 14 insertions(+), 30 deletions(-)drivers/usb/gadget/s3c-hsudc.c +1
-6@@ -282,8 +282,7 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)* All the endpoints are stopped and any pending transfer requests if any on * the endpoint are terminated. */ -static void s3c_hsudc_stop_activity (struct s3c_hsudc *hsudc, -struct usb_gadget_driver *driver) +static void s3c_hsudc_stop_activity (struct s3c_hsudc *hsudc) {struct s3c_hsudc_ep *hsep;int epnum;@@ -295,10 +294,6 @@ static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc, hsep->stopped =1 ;s3c_hsudc_nuke_ep (hsep, -ESHUTDOWN ); } - -spin_unlock (&hsudc->lock); - driver->disconnect (&hsudc->gadget); -spin_lock (&hsudc->lock); }/**
drivers/usb/gadget/s3c-hsudc.c static irqreturn_t s3c_hsudc_irq(int irq, void *_dev) · line 1136
Quoted 9 lines
drivers/usb/gadget/s3c-hsudc.c +2
-2@@ -1135,16 +1130,15 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)return IRQ_HANDLED ; } -static int s3c_hsudc_start (struct usb_gadget_driver *driver, -int (*bind)(struct usb_gadget *)) +static int s3c_hsudc_start (struct usb_gadget *gadget, +struct usb_gadget_driver *driver) {struct s3c_hsudc *hsudc = the_controller;
I remember commenting that this 'the_controller' global could be dropped. I will add a patch to this series myself this time otherwise we will not have time to get this in during 3.3 merge window, but next time please make sure you fix all comments (or give reasons not to do so) before sending another version.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111220/3d738792/attachment-0001.sig>
PATCH v4 6/8 s3c-hsudc: Add regulator handling
In reply to Heiko StübnerThe udc has three supplies: vdda (3.3V), vddi (1.2V) and vddosc (1.8-3.3V). Turn these on and off on start and stop calls.
--- drivers/usb/gadget/s3c-hsudc.c | 41 ++++++++++++++++++++++++++++++++++++--- 1 files changed, 37 insertions(+), 4 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +37 -4
@@ -29,6 +29,7 @@#include <linux/usb/otg.h> #include <linux/prefetch.h> #include <linux/platform_data/s3c-hsudc.h> +#include <linux/regulator/consumer.h> #include <mach/regs-s3c2443-clock.h>
@@ -87,6 +88,12 @@#define DATA_STATE_XMIT (1)#define DATA_STATE_RECV (2) +static const char *const s3c_hsudc_supply_names[] = { +"vdda" ,/* analog phy supply, 3.3V */ +"vddi" ,/* digital phy supply, 1.2V */ +"vddosc" ,/* oscillator supply, 1.8V - 3.3V */ +}; +/** * struct s3c_hsudc_ep - Endpoint representation used by driver. * @ep: USB gadget layer representation of device endpoint.
@@ -139,6 +146,7 @@ struct s3c_hsudc {struct device *dev;struct s3c24xx_hsudc_platdata *pd;struct otg_transceiver *transceiver; +struct regulator_bulk_data supplies[ARRAY_SIZE (s3c_hsudc_supply_names)];spinlock_t lock;void __iomem *regs;struct resource *mem_rsrc;
@@ -1150,15 +1158,20 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, hsudc->driver = driver; hsudc->gadget.dev.driver = &driver->driver; + ret =regulator_bulk_enable (ARRAY_SIZE (hsudc->supplies), + hsudc->supplies); +if (ret !=0 ) { +dev_err (hsudc->dev,"failed to enable supplies: %d\n" , ret); + goto err_supplies; + } +/* connect to bus through transceiver */ if (hsudc->transceiver) { ret =otg_set_peripheral (hsudc->transceiver, &hsudc->gadget);if (ret) {dev_err (hsudc->dev,"%s: can't bind to transceiver\n" , hsudc->gadget.name); - hsudc->driver =NULL ; - hsudc->gadget.dev.driver =NULL ; -return ret; + goto err_otg; } }
@@ -1171,6 +1184,12 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, hsudc->pd->gpio_init ();return 0 ; +err_otg: +regulator_bulk_disable (ARRAY_SIZE (hsudc->supplies), hsudc->supplies); +err_supplies: + hsudc->driver =NULL ; + hsudc->gadget.dev.driver =NULL ; +return ret; } static int s3c_hsudc_stop(struct usb_gadget *gadget,
@@ -1200,6 +1219,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,disable_irq (hsudc->irq); +regulator_bulk_disable (ARRAY_SIZE (hsudc->supplies), hsudc->supplies); +dev_info (hsudc->dev,"unregistered gadget driver '%s'\n" , driver->driver.name);return 0 ;
@@ -1241,7 +1262,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)struct resource *res;struct s3c_hsudc *hsudc;struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data; -int ret; +int ret, i; hsudc = kzalloc(sizeof(struct s3c_hsudc) + sizeof(struct s3c_hsudc_ep) * pd->epnum,
@@ -1258,6 +1279,16 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) hsudc->transceiver =otg_get_transceiver (); +for (i =0 ; i <ARRAY_SIZE (hsudc->supplies); i++) + hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; + + ret =regulator_bulk_get (dev,ARRAY_SIZE (hsudc->supplies), + hsudc->supplies); +if (ret !=0 ) { +dev_err (dev,"failed to request supplies: %d\n" , ret); + goto err_supplies; + } + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 );if (!res) {dev_err (dev,"unable to obtain driver resource data\n" );
@@ -1352,6 +1383,8 @@ err_res:if (hsudc->transceiver)otg_put_transceiver (hsudc->transceiver); +regulator_bulk_free (ARRAY_SIZE (hsudc->supplies), hsudc->supplies); +err_supplies:kfree (hsudc);return ret; }
Signature · 1 line
1.7.2.3
PATCH v4 7/8 s3c-hsudc: use release_mem_region instead of release_resource
In reply to Heiko StübnerAs the memory region is requested through request_mem_region use the correct paired method to release it in the error path and don't go "beneath the API" as pointed out by Russel King.
--- drivers/usb/gadget/s3c-hsudc.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +1 -3
@@ -1376,9 +1376,7 @@ err_irq:iounmap (hsudc->regs); err_remap: -release_resource (hsudc->mem_rsrc); -kfree (hsudc->mem_rsrc); - +release_mem_region (res->start,resource_size (res)); err_res:if (hsudc->transceiver)otg_put_transceiver (hsudc->transceiver);
Signature · 1 line
1.7.2.3
PATCH 7/8 s3c-hsudc: use release_mem_region instead of release_resource
Quoted 3 lines · Heiko St?bner
As the memory region is requested through
request_mem_regionuse the correct paired method to release it in the error path and don't go "beneath the API" as pointed out by Russel King.
Please correct the spelling, thanks.
PATCH 7/8 s3c-hsudc: use release_mem_region instead of release_resource
Quoted 6 lines · Russell King - ARM Linux
Quoted 3 lines · Heiko St?bner
As the memory region is requested through
request_mem_regionuse the correct paired method to release it in the error path and don't go "beneath the API" as pointed out by Russel King.Please correct the spelling, thanks.
Just did, do you prefer that I add a Reported-by: Russell instead of that mention ?
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111220/ea81203d/attachment.sig>
PATCH 7/8 s3c-hsudc: use release_mem_region instead of release_resource
Quoted 10 lines · Felipe Balbi
Quoted 6 lines · Russell King - ARM Linux
Quoted 3 lines · Heiko St?bner
As the memory region is requested through
request_mem_regionuse the correct paired method to release it in the error path and don't go "beneath the API" as pointed out by Russel King.Please correct the spelling, thanks.
Just did, do you prefer that I add a Reported-by: Russell instead of that mention ?
If you wish - I don't mind. If you do, please use an email address of rmk+kernel at arm.linux.org.uk in the attributations. Thanks.
PATCH v4 8/8 s3c-hsudc: remove the_controller global
In reply to Heiko StübnerInstead use container_of to retrieve the s3c_hsudc from the struct usb_gadget pointer.
--- drivers/usb/gadget/s3c-hsudc.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-)
drivers/usb/gadget/s3c-hsudc.c +6 -5
@@ -161,7 +161,6 @@ struct s3c_hsudc {#define ep_index (_ep) ((_ep)->bEndpointAddress & \ USB_ENDPOINT_NUMBER_MASK) -static struct s3c_hsudc *the_controller;static const char driver_name[] ="s3c-udc" ;static const char ep0name[] ="ep0-control" ;
@@ -1141,7 +1140,8 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)static int s3c_hsudc_start (struct usb_gadget *gadget,struct usb_gadget_driver *driver) { -struct s3c_hsudc *hsudc = the_controller; +struct s3c_hsudc *hsudc = + container_of(gadget, struct s3c_hsudc, gadget);int ret; if (!driver
@@ -1195,7 +1195,8 @@ err_supplies:static int s3c_hsudc_stop (struct usb_gadget *gadget,struct usb_gadget_driver *driver) { -struct s3c_hsudc *hsudc = the_controller; +struct s3c_hsudc *hsudc = + container_of(gadget, struct s3c_hsudc, gadget);unsigned long flags;if (!hsudc)
@@ -1238,7 +1239,8 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)static int s3c_hsudc_vbus_draw (struct usb_gadget *gadget,unsigned mA) { -struct s3c_hsudc *hsudc = the_controller; +struct s3c_hsudc *hsudc = + container_of(gadget, struct s3c_hsudc, gadget);if (!hsudc)return -ENODEV ;
@@ -1272,7 +1274,6 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)return -ENOMEM ; } - the_controller = hsudc;platform_set_drvdata (pdev, dev); hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data;
Signature · 1 line
1.7.2.3
PATCH 8/8 s3c-hsudc: remove the_controller global
Hi,
Quoted 4 lines · Heiko St?bner
Instead use
container_ofto retrieve thes3c_hsudcfrom the structusb_gadgetpointer.Signed-off-by Heiko Stuebner <[email protected]>
aha, it's here. So I replied too fast. Sorry about that and thanks for doing this.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111220/9ec3e5da/attachment.sig>
PATCH 8/8 s3c-hsudc: remove the_controller global
In reply to Heiko StübnerQuoted 21 lines · Heiko St?bner
Instead use
container_ofto retrieve thes3c_hsudcfrom the structusb_gadgetpointer.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/usb/gadget/s3c-hsudc.c | 11 ++++++----- 1 files changed, 6 insertions(+), 5 deletions(-)drivers/usb/gadget/s3c-hsudc.c +0
-1@@ -161,7 +161,6 @@ struct s3c_hsudc {#define ep_index (_ep) ((_ep)->bEndpointAddress & \ USB_ENDPOINT_NUMBER_MASK) -static struct s3c_hsudc *the_controller;static const char driver_name[] ="s3c-udc" ;static const char ep0name[] ="ep0-control" ;
drivers/usb/gadget/s3c-hsudc.c static irqreturn_t s3c_hsudc_irq(int irq, void *_dev) · line 1144
Quoted 6 lines
drivers/usb/gadget/s3c-hsudc.c +2
-1@@ -1141,7 +1140,8 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)static int s3c_hsudc_start (struct usb_gadget *gadget,struct usb_gadget_driver *driver) { -struct s3c_hsudc *hsudc = the_controller; +struct s3c_hsudc *hsudc = + container_of(gadget, struct s3c_hsudc, gadget);
I have changed all these container_of() to your to_hsudc() helper function.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20111220/e3d28962/attachment.sig>