ASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controls
PATCH 1/1 ASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controls
The module desciption says this is ASoC alc5621/2/3 driver. Make the naming consistent with the reset of the code.
Signed-off-by Axel Lin <[email protected]>
--- sound/soc/codecs/alc5623.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
sound/soc/codecs/alc5623.c +6 -6
@@ -99,7 +99,7 @@ static const unsigned int boost_tlv[] = { }; static const DECLARE_TLV_DB_SCALE(dig_tlv, 0, 600, 0); -static const struct snd_kcontrol_new rt5621_vol_snd_controls[] = { +static const struct snd_kcontrol_new alc5621_vol_snd_controls[] = {SOC_DOUBLE_TLV ("Speaker Playback Volume" ,ALC5623_SPK_OUT_VOL ,8 ,0 ,31 ,1 , hp_tlv), SOC_DOUBLE("Speaker Playback Switch",
@@ -110,7 +110,7 @@ static const struct snd_kcontrol_new rt5621_vol_snd_controls[] = { ALC5623_HP_OUT_VOL, 15, 7, 1, 1), }; -static const struct snd_kcontrol_new rt5622_vol_snd_controls[] = { +static const struct snd_kcontrol_new alc5622_vol_snd_controls[] = {SOC_DOUBLE_TLV ("Speaker Playback Volume" ,ALC5623_SPK_OUT_VOL ,8 ,0 ,31 ,1 , hp_tlv), SOC_DOUBLE("Speaker Playback Switch",
@@ -925,12 +925,12 @@ static int alc5623_probe(struct snd_soc_codec *codec)switch (alc5623->id) {case 0x21 : -snd_soc_add_controls (codec, rt5621_vol_snd_controls, -ARRAY_SIZE (rt5621_vol_snd_controls)); +snd_soc_add_controls (codec, alc5621_vol_snd_controls, +ARRAY_SIZE (alc5621_vol_snd_controls));break ;case 0x22 : -snd_soc_add_controls (codec, rt5622_vol_snd_controls, -ARRAY_SIZE (rt5622_vol_snd_controls)); +snd_soc_add_controls (codec, alc5622_vol_snd_controls, +ARRAY_SIZE (alc5622_vol_snd_controls));break ;case 0x23 : snd_soc_add_controls(codec, alc5623_vol_snd_controls,
Signature · 1 line
1.7.5.4
Mark Brown
AppliedQuoted 2 lines · Axel Lin
The module desciption says this is ASoC alc5621/2/3 driver. Make the naming consistent with the reset of the code.
Applied, thanks.