opensm/man/torus-2QoS.conf.5.in: Update portgroup_max_ports section
PATCH 1/1 opensm/man/torus-2QoS.conf.5.in: Update portgroup_max_ports section
for host ports including switch port 0
Acked-by Jim Schutt <[email protected]>
---
man/torus-2QoS.conf.5.in +5 -1
@@ -1,4 +1,4 @@ -.TH TORUS\-2QOS.CONF 5 "November 11, 2010" "OpenIB" "OpenIB Management" +.TH TORUS\-2QOS.CONF 5 "November 7, 2011" "OpenIB" "OpenIB Management" . .SH NAME torus\-2QoS.conf \- Torus-2QoS configuration for OpenSM subnet manager
@@ -138,6 +138,10 @@ The default value is 16. Torus-2QoS will log an error message during topology discovery if this parameter needs to be increased. If this keyword appears multiple times, the last instance prevails. +.P +Note that the switch management port (switch port 0) gets put into +the same port group with the host ports, so if you have 16 host ports per +switch, portgroup_max_ports would need to be at least 17. .RE . .P
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 4EB82753.7060001-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org
Hi Hal,
Quoted 6 lines · Hal Rosenstock
for host ports including switch port 0
Acked-by Jim Schutt <[email protected]>---
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html