Add defconfigs for LPC3250 boards

PATCH Superseded Alexandre Belloni 2 participants 6 messages Jan 4, 2012 – Jan 5, 2012 Arm/LPC32XX SoC support

lore

Share & tools

lore

Alexandre Belloni

author

2012-01-04 17:13 UTC #0 lore raw

v3 cover Add defconfigs for LPC3250 boards

V3 using feedback from Thomas.

Alexandre Belloni (2):
lpc32xx: Add CDL to the available bootloaders
Add defconfigs for LPC3250 boards

 boot/Config.in                                     |    1 +
 boot/lpc32xxcdl/Config.in                          |   10 +
 .../lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch |   52 ++
 .../lpc32xxcdl-2.11-delete_redundant_files.patch   |  964 ++++++++++++++++++++
 boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch |  183 ++++
 boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch      |  521 +++++++++++
 boot/lpc32xxcdl/lpc32xxcdl.mk                      |   60 ++
 configs/ea3250_defconfig                           |   39 +
 configs/fdi3250_defconfig                          |   39 +
 configs/phy3250_defconfig                          |   39 +
 10 files changed, 1908 insertions(+), 0 deletions(-)
 create mode 100644 boot/lpc32xxcdl/Config.in
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl.mk
 create mode 100644 configs/ea3250_defconfig
 create mode 100644 configs/fdi3250_defconfig
 create mode 100644 configs/phy3250_defconfig

Signature · 1 line

1.7.8.2

Alexandre Belloni

author

2012-01-04 17:13 UTC #1 lore raw

PATCH v3 1/2 lpc32xx: Add CDL to the available bootloaders

This will build kickstart and s1l for the selected board and install them alongside u-boot.

Signed-off-by Alexandre Belloni <[email protected]>

---
 boot/Config.in                                     |    1 +
 boot/lpc32xxcdl/Config.in                          |   10 +
 .../lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch |   52 ++
 .../lpc32xxcdl-2.11-delete_redundant_files.patch   |  964 ++++++++++++++++++++
 boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch |  183 ++++
 boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch      |  521 +++++++++++
 boot/lpc32xxcdl/lpc32xxcdl.mk                      |   60 ++
 7 files changed, 1791 insertions(+), 0 deletions(-)
 create mode 100644 boot/lpc32xxcdl/Config.in
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch
 create mode 100644 boot/lpc32xxcdl/lpc32xxcdl.mk

boot/Config.in +1 -0

index 2a97695..6916249 100644
@@ -7,6 +7,7 @@ source "boot/uboot/Config.in"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91dataflashboot/Config.in"
 source "boot/xloader/Config.in"
+source "boot/lpc32xxcdl/Config.in"
 
 endmenu

boot/lpc32xxcdl/Config.in new file +10 -0

new file mode 100644
index 0000000..b6cbcfd
@@ -0,0 +1,10 @@
+config BR2_TARGET_LPC32XXCDL
+	depends on BR2_arm
+	bool "LPC32XX CDL (kickstart and S1L)"
+
+if BR2_TARGET_LPC32XXCDL
+
+config BR2_TARGET_LPC32XXCDL_BOARDNAME
+	string "LPC32xx board name"
+
+endif #BR2_TARGET_LPC32XXCDL

boot/lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch new file +52 -0

52 lines not on this page · raw message

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file +964 -0

964 lines not on this page · raw message

boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch new file +183 -0

183 lines not on this page · raw message

boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch new file +521 -0

521 lines not on this page · raw message

boot/lpc32xxcdl/lpc32xxcdl.mk new file +60 -0

60 lines not on this page · raw message

Signature · 1 line

1.7.8.2

Thomas Petazzoni

2012-01-05 07:29 UTC #2 lore raw

PATCH v3 1/2 lpc32xx: Add CDL to the available bootloaders

Le Wed, 4 Jan 2012 18:13:34 +0100,
Alexandre Belloni <[email protected]> a ?crit :

boot/Config.in source "boot/uboot/Config.in" · line 10

Quoted 5 lines

boot/Config.in +1 -0

@@ -7,6 +7,7 @@ source "boot/uboot/Config.in"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91dataflashboot/Config.in"
 source "boot/xloader/Config.in"
+source "boot/lpc32xxcdl/Config.in"

Sorry, I didn't notice that in my previous review. Entries should be ordered alphabetically.

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch

Quoted 2 lines

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file +0 -0

This patch requires a description + Signed-off-by.

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch line 1

Quoted 3 lines

+++ b/boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch
boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file +1 -0
@@ -0,0 +1,183 @@
+Fix compilation and eabi issues

A slightly extended description of what the patch does and why it is needed would be good to have.

Quoted 52 lines

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file +51 -0

+++ b/boot/lpc32xxcdl/lpc32xxcdl.mk

@@ -0,0 +1,60 @@
+#############################################################
+#
+# LPC32XX CDL
+#
+#############################################################
+
+LPC32XXCDL_VERSION = lpc32xx_cdl_v2.11
+LPC32XXCDL_SITE = http://git.lpcware.com/lpc3xxx_cdl.git
+LPC32XXCDL_SITE_METHOD = git
+
+LPC32XXCDL_INSTALL_TARGET = NO
+LPC32XXCDL_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"ea3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"phy3250")
+LPC32XXCDL_KICKSTART = kickstart/kickstart_nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l/s1l_nand_boot
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"fdi3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart_jtag
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp_jtag
+endif
+
+LPC32XXCDL_BUILD_FLAGS = \
+	CROSS_COMPILE=$(TARGET_CROSS)           \
+	NXPMCU_WINBASE=$(@D)                    \
+	NXPMCU_SOFTWARE=$(@D)                   \
+	BSP=$(BR2_TARGET_LPC32XXCDL_BOARDNAME)  \
+	CSP=lpc32xx TOOL=gnu GEN=lpc
+
+LPC32XXCDL_BOARD_STARTUP_DIR = \
+	csps/lpc32xx/bsps/$(BR2_TARGET_LPC32XXCDL_BOARDNAME)/startup/examples/
+
+define LPC32XXCDL_BUILD_CMDS
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch line 60

Quoted 10 lines

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch new file +10 -0

+endef
+
+define LPC32XXCDL_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)/*gnu.bin $(BINARIES_DIR)
+endef
+
+$(eval $(call GENTARGETS))

Looks much better now, thanks!

Thomas

Signature · 4 lines

Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Alexandre Belloni

author

2012-01-05 09:51 UTC #3 lore raw

PATCH v3 1/2 lpc32xx: Add CDL to the available bootloaders

Quoted 12 lines · Thomas Petazzoni

Le Wed, 4 Jan 2012 18:13:34 +0100,
Alexandre Belloni <[email protected]> a ?crit :
boot/Config.in source "boot/uboot/Config.in" · line 10
Quoted 5 lines
boot/Config.in +1 -0
@@ -7,6 +7,7 @@ source "boot/uboot/Config.in"
 source "boot/at91bootstrap/Config.in"
 source "boot/at91dataflashboot/Config.in"
 source "boot/xloader/Config.in"
+source "boot/lpc32xxcdl/Config.in"
Sorry, I didn't notice that in my previous review. Entries should be ordered alphabetically.

I read that on the mailing list but that is not the case at the moment, should I reorder all the entries ?

Signature · 16 lines

Alexandre Belloni

Adeneo Embedded
Adetel Group

2, ch. du Ruisseau - 69134 Ecully, France

www.adeneo-embedded.com
 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120105/958a1476/attachment.html>

Thomas Petazzoni

2012-01-05 10:18 UTC #4 lore raw

PATCH v3 1/2 lpc32xx: Add CDL to the available bootloaders

Le Thu, 05 Jan 2012 10:51:29 +0100,
Alexandre Belloni <[email protected]> a ?crit :

Quoted 2 lines

I read that on the mailing list but that is not the case at the moment, should I reorder all the entries ?

Yes, as a preliminary patch in your series, re-order the entries, and then add LPC CDL at the right location.

Thanks!

Thomas

Signature · 4 lines

Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Alexandre Belloni

author

2012-01-04 17:13 UTC #5 lore raw

PATCH v3 2/2 Add defconfigs for LPC3250 boards

In reply to Alexandre Belloni

ea3250: Embedded Artists
http://www.embeddedartists.com/products/kits/lpc3250_kit.php

fdi3250: Future Designs Inc.
http://www.teamfdi.com/development-tools-kits/products/6/SOMDIMM-LPC3250

phy3250: Phytec
http://www.phytec.com/products/som/ARM-XScale/phyCORE-ARM9-LPC3250.html

Signed-off-by Alexandre Belloni <[email protected]>

---
 configs/ea3250_defconfig  |   39 +++++++++++++++++++++++++++++++++++++++
 configs/fdi3250_defconfig |   39 +++++++++++++++++++++++++++++++++++++++
 configs/phy3250_defconfig |   39 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+), 0 deletions(-)
 create mode 100644 configs/ea3250_defconfig
 create mode 100644 configs/fdi3250_defconfig
 create mode 100644 configs/phy3250_defconfig

configs/ea3250_defconfig new file +39 -0

new file mode 100644
index 0000000..da84c7e
@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="ea3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="ea3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="ea3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

configs/fdi3250_defconfig new file +39 -0

new file mode 100644
index 0000000..505dc8b
@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="fdi3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="fdi3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="fdi3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

configs/phy3250_defconfig new file +39 -0

new file mode 100644
index 0000000..d46d719
@@ -0,0 +1,39 @@
+# Architecture
+BR2_arm=y
+BR2_arm926t=y
+
+BR2_ARM_TYPE="ARM926T"
+BR2_ARM_EABI=y
+
+#
+# GCC Options
+# We need to force GCC 4.3.x because it is the last version
+# that will compile a kernel with ethernet working correctly
+BR2_GCC_VERSION_4_3_X=y
+
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="phy3250"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="master"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/uboot-2009.03-lpc32xx"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="master"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_LPC32XXCDL=y
+BR2_TARGET_LPC32XXCDL_BOARDNAME="phy3250"
+
+
+#
+# Kernel
+#
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.lpclinux.com/linux-2.6.34-lpc32xx"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="master"
+BR2_LINUX_KERNEL_VERSION="master"
+BR2_LINUX_KERNEL_PATCH=""
+BR2_LINUX_KERNEL_USE_DEFCONFIG=y
+BR2_LINUX_KERNEL_DEFCONFIG="phy3250"
+BR2_LINUX_KERNEL_UIMAGE=y
+

Signature · 1 line

1.7.8.2