Skip to contentSkip to conversation

ppc4xx: Setup HICB on Io64

PATCH New Dirk Eibach 2 participants 2 messages Jan 2, 2012 – Jan 9, 2012

lore
Share & tools
lore

Dirk Eibach

author
#0 lore raw

PATCH 1/1 ppc4xx: Setup HICB on Io64

The FPGA High-Speed Interconnect Bus (HICB) is now setup by u-boot.

Signed-off-by Dirk Eibach <[email protected]>
---
 board/gdsys/405ex/io64.c |   16 ++++++++++++++++
 include/gdsys_fpga.h     |    5 ++++-
 2 files changed, 20 insertions(+), 1 deletions(-)
board/gdsys/405ex/io64.c +16 -0
index a997571..177141d 100644
@@ -249,6 +249,7 @@ int last_stage_init(void)
 	char str_serdes[] = "Start SERDES blocks";
 	char str_channels[] = "Start FPGA channels";
 	char str_locks[] = "Verify SERDES locks";
+	char str_hicb[] = "Verify HICB status";
 	char str_status[] = "Verify PHY status -";
 	char slash[] = "\\|/-\\|/-";
 

@@ -312,6 +313,21 @@ int last_stage_init(void)
 	}
 	blank_string(strlen(str_locks));
 
+	/* verify hicb_status */
+	puts(str_hicb);
+	for (fpga = 0; fpga < 2; ++fpga) {
+		u16 *ch0_hicb_status_int = &(fpga ? fpga1 : fpga0)->ch0_hicb_status_int;
+		for (k = 0; k < 32; ++k) {
+			u16 status = in_le16(ch0_hicb_status_int + 4*k);
+			if (status)
+				printf("fpga %d hicb %d: hicb status %04x\n",
+					fpga, k, status);
+			/* reset events */
+			out_le16(ch0_hicb_status_int + 4*k, status);
+		}
+	}
+	blank_string(strlen(str_hicb));
+
 	/* verify phy status */
 	puts(str_status);
 	for (k = 0; k < 32; ++k) {
include/gdsys_fpga.h +4 -1
index e7a072b..949864c 100644
@@ -82,7 +82,10 @@ typedef struct ihs_fpga {
 	u16 reserved_1[502];	/* 0x0014 */
 	u16 ch0_status_int;	/* 0x0400 */
 	u16 ch0_config_int;	/* 0x0402 */
-	u16 reserved_2[7677];	/* 0x0404 */
+	u16 reserved_2[126];	/* 0x0404 */
+	u16 ch0_hicb_status_int;/* 0x0500 */
+	u16 ch0_hicb_config_int;/* 0x0502 */
+	u16 reserved_3[7549];	/* 0x0504 */
 	u16 reflection_high;	/* 0x3ffe */
 } ihs_fpga_t;
 #endif
Signature · 1 line
1.7.2.5
#1 lore raw

PATCH 1/1 ppc4xx: Setup HICB on Io64

Quoted 1 line · On Monday 02 January 2012 11:02:46 Dirk Eibach wrote:

The FPGA High-Speed Interconnect Bus (HICB) is now setup by u-boot.

Applied to u-boot-ppc4xx/master. Thanks.

Best regards,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de