mxs-auart serial driver DMA support?
Hi,
Any plans to add DMA support for mxs-auart serial driver? I noticed it is impossible to archive full 3.25 Mbs speed with current one.
There is DMA supported driver on freescale's git tree:
http://opensource.freescale.com/git?p=imx/linux-2.6-imx.git;a=blob;f=drivers/serial/mxs-auart.c;hb=imx_2.6.35_11.09.01
As I understood porting DMA support from freescale's driver is not trivial because MXS DMA implementation has been changed to mainline version.
Regards,
Lauri Hintsala
Quoted 3 lines
Any plans to add DMA support for mxs-auart serial driver? I noticed it is impossible to archive full 3.25 Mbs speed with current one.
No plans from our side, currently.
Quoted 3 lines
As I understood porting DMA support from freescale's driver is not trivial because MXS DMA implementation has been changed to mainline version.
Yes, luckily. DMAENGINE is really the way to go.
Regards,
Wolfram
Signature · 9 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120112/267d55f1/attachment.sig>
Quoted 5 lines · Wolfram Sang
Quoted 3 lines
Any plans to add DMA support for mxs-auart serial driver? I noticed it is impossible to archive full 3.25 Mbs speed with current one.
No plans from our side, currently.
OK, AUART works fine with 115200 bps but over that it loose data randomly. I have seen fifo overrun errors during receiving data with 1Mbs and over. So current driver is unuseful with higher baud rates.
Regards,
Lauri
Quoted 10 lines · Lauri Hintsala
Quoted 5 lines · Wolfram Sang
Quoted 3 lines
Any plans to add DMA support for mxs-auart serial driver? I noticed it is impossible to archive full 3.25 Mbs speed with current one.
No plans from our side, currently.
OK, AUART works fine with 115200 bps but over that it loose data randomly. I have seen fifo overrun errors during receiving data with 1Mbs and over. So current driver is unuseful with higher baud rates.
Care to send a patch adding this information to Kconfig help text and/or source code? Would be much more useful there, I think.
Regards,
Wolfram
Signature · 9 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120112/a517d75b/attachment.sig>