Skip to contentSkip to conversation

x86: clean up smpboot.c's use of udelay+schedule

PATCH Arjan van de Ven 5 participants 12 messages Jan 31, 2012 – Feb 3, 2012 x86

lore
Share & tools
lore
#0 lore raw
Quoted 1 line

From 9f8dd2b15ff19ad73ee0eb235b4fdde9277185e8 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Mon, 30 Jan 2012 20:38:09 -0800
Subject: [PATCH] x86: clean up smpboot.c's use of udelay+schedule

smpboot.c does a udelay() followed by a schedule(); to yield the CPU to other threads. This comes from the time when the kernel did not yet have usleep_*() style APIs...

... nowadays, the kernel can do better than this, and this patch replaces this code sequence with a usleep_range(), so that the CPU is actually yielded for some real time.

---
 arch/x86/kernel/smpboot.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)
arch/x86/kernel/smpboot.c +1 -2
index 66d250c..0b794c6 100644
@@ -781,14 +781,13 @@ do_rest:
 		for (timeout = 0; timeout < 50000; timeout++) {
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))
 				break;	/* It has booted */
-			udelay(100);
 			/*
 			 * Allow other tasks to run while we wait for the
 			 * AP to come online. This also gives a chance
 			 * for the MTRR work(triggered by the AP coming online)
 			 * to be completed in the stop machine context.
 			 */
-			schedule();
+			usleep_range(100, 200);
 		}
 
 		if (cpumask_test_cpu(cpu, cpu_callin_mask))
Signature · 8 lines
1.7.6.4



-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#1 lore raw
Quoted 25 lines · Arjan van de Ven
Quoted 1 line

From 9f8dd2b15ff19ad73ee0eb235b4fdde9277185e8 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Mon, 30 Jan 2012 20:38:09 -0800
Subject: [PATCH] x86: clean up smpboot.c's use of udelay+schedule

smpboot.c does a udelay() followed by a schedule(); to yield the CPU to other threads. This comes from the time when the kernel did not yet have usleep_*() style APIs...

... nowadays, the kernel can do better than this, and this patch replaces this code sequence with a usleep_range(), so that the CPU is actually yielded for some real time.

---
 arch/x86/kernel/smpboot.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)
arch/x86/kernel/smpboot.c +0 -0
index 66d250c..0b794c6 100644
@@ -781,14 +781,13 @@ do_rest:
 		for (timeout = 0; timeout < 50000; timeout++) {
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))

arch/x86/kernel/smpboot.c do_rest: · line 790

Quoted 10 lines
arch/x86/kernel/smpboot.c +1 -2
 				break;	/* It has booted */
-			udelay(100);
 			/*
 			 * Allow other tasks to run while we wait for the
 			 * AP to come online. This also gives a chance
 			 * for the MTRR work(triggered by the AP coming online)
 			 * to be completed in the stop machine context.
 			 */
-			schedule();
+			usleep_range(100, 200);

I'm wondering whether we could shorten this delay to say 10 usecs and thus save 0.1 msecs (or more) from a typical SMP bootup?

Thanks,

Ingo

#2 lore raw
Quoted 33 lines · Ingo Molnar
Quoted 31 lines · Arjan van de Ven
Quoted 1 line

From 9f8dd2b15ff19ad73ee0eb235b4fdde9277185e8 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Mon, 30 Jan 2012 20:38:09 -0800
Subject: [PATCH] x86: clean up smpboot.c's use of udelay+schedule

smpboot.c does a udelay() followed by a schedule(); to yield the CPU to other threads. This comes from the time when the kernel did not yet have usleep_*() style APIs...

... nowadays, the kernel can do better than this, and this patch replaces this code sequence with a usleep_range(), so that the CPU is actually yielded for some real time.

---
 arch/x86/kernel/smpboot.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)
arch/x86/kernel/smpboot.c +0 -1
index 66d250c..0b794c6 100644
@@ -781,14 +781,13 @@ do_rest:
 		for (timeout = 0; timeout < 50000; timeout++) {
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))
 				break;	/* It has booted */
-			udelay(100);
 			/*
 			 * Allow other tasks to run while we wait for the
 			 * AP to come online. This also gives a chance
 			 * for the MTRR work(triggered by the AP coming online)
Quoted 8 lines

arch/x86/kernel/smpboot.c do_rest: · line 790

Quoted 4 lines
arch/x86/kernel/smpboot.c +1 -1
 			 * to be completed in the stop machine context.
 			 */
-			schedule();
+			usleep_range(100, 200);

I'm wondering whether we could shorten this delay to say 10 usecs and thus save 0.1 msecs (or more) from a typical SMP bootup?

wait_on_completion_timeout() and have the fresh cpu do a wakeup when its done. That way there's no need for a minimal wait time.

Anyway, all the cpu hotplug code is a friggin trainwreck and needs a complete rewrite across all archs.

#3 lore raw
Quoted 43 lines · Peter Zijlstra
Quoted 33 lines · Ingo Molnar
Quoted 31 lines · Arjan van de Ven
Quoted 1 line

From 9f8dd2b15ff19ad73ee0eb235b4fdde9277185e8 Mon Sep 17 00:00:00 2001

From: Arjan van de Ven <[email protected]>
Date: Mon, 30 Jan 2012 20:38:09 -0800
Subject: [PATCH] x86: clean up smpboot.c's use of udelay+schedule

smpboot.c does a udelay() followed by a schedule(); to yield the CPU to other threads. This comes from the time when the kernel did not yet have usleep_*() style APIs...

... nowadays, the kernel can do better than this, and this patch replaces this code sequence with a usleep_range(), so that the CPU is actually yielded for some real time.

---
 arch/x86/kernel/smpboot.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)
arch/x86/kernel/smpboot.c +0 -1
index 66d250c..0b794c6 100644
@@ -781,14 +781,13 @@ do_rest:
 		for (timeout = 0; timeout < 50000; timeout++) {
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))
 				break;	/* It has booted */
-			udelay(100);
 			/*
 			 * Allow other tasks to run while we wait for the
 			 * AP to come online. This also gives a chance
 			 * for the MTRR work(triggered by the AP coming online)
Quoted 8 lines

arch/x86/kernel/smpboot.c do_rest: · line 790

Quoted 4 lines
arch/x86/kernel/smpboot.c +1 -1
 			 * to be completed in the stop machine context.
 			 */
-			schedule();
+			usleep_range(100, 200);

I'm wondering whether we could shorten this delay to say 10 usecs and thus save 0.1 msecs (or more) from a typical SMP bootup?

Quoted 3 lines

wait_on_completion_timeout() and have the fresh cpu do a wakeup when its done. That way there's no need for a minimal wait time.

Yeah.

Quoted 2 lines

Anyway, all the cpu hotplug code is a friggin trainwreck and needs a complete rewrite across all archs.

Wanna give a short TODO list to anyone wanting to work on that?

Thanks,

Ingo

#4 lore raw
Quoted 1 line · Ingo Molnar

Wanna give a short TODO list to anyone wanting to work on that?

I paged out most details again, but it goes something like:

- read and understand the current generic code

- and all architecture code, at which point you'll probably boggle at all the similarities that are all subtly different (there's about 3 actually different ways in the arch code).

- pick one, preferably one that keeps additional state and doesn't fully rely on the online bits and pull it into generic code and provide a small vector of arch specific functions.

- convert all archs over.

Also related:

- figure out why cpu_down needs kstopmachine, I'm not sure it does.. we should be able to tear down a cpu using synchronize_sched() and a single stop_one_cpu(). (someday when there's time I might actually try to implement this).

#5 lore raw
Quoted 18 lines · Peter Zijlstra
Quoted 1 line · Ingo Molnar

Wanna give a short TODO list to anyone wanting to work on that?

I paged out most details again, but it goes something like:

- read and understand the current generic code

- and all architecture code, at which point you'll probably boggle at all the similarities that are all subtly different (there's about 3 actually different ways in the arch code).

- pick one, preferably one that keeps additional state and doesn't fully rely on the online bits and pull it into generic code and provide a small vector of arch specific functions.

- convert all archs over.

Quoted 6 lines

Also related:

- figure out why cpu_down needs kstopmachine, I'm not sure it does.. we should be able to tear down a cpu using synchronize_sched() and a single stop_one_cpu(). (someday when there's time I might actually try to implement this).

Currently, a number of the CPU_DYING notifiers assume that they are running in stop-machine context, including those of RCU.

However, this is not an inherent property of RCU -- DYNIX/ptx's CPU-offline process did not stop the whole machine, after all, and RCU (we called it rclock, but whatever) was happy with this arrangement. In fact, if the outgoing CPU could be made to stop in that context instead of returning to the scheduler and the idle loop, it would make my life a bit easier.

My question is why aren't the notifiers executed in the opposite order going down and coming up, with the coming-up order matching the boot order? Also, why can't the CPU's exit from this world be driven out of the idle loop? That way, the CPU wouldn't mark itself offline (thus in theory to be ignored by CPU), and then immediately dive into the scheduler and who knows what all else, using RCU all the time. ;-)

(RCU handles this by keeping a separate set of books for online CPUs. It considers a CPU online at CPU_UP_PREPARE time, and doesn't consider it offline until CPU_DEAD time. To handle the grace periods between, force_quiescent_state() allows the grace period to run a few jiffies before checking cpu_online_map, which allows a given CPU to safely use RCU for at least one jiffy before marking itself online and for at least one jiffy after marking itself offline.)

Yet another question is about races between CPU-hotplug events and registering/unregistering cpu notifiers. I don't believe that the current code does what you would like in all cases. The only way I can imagine it really working would be to use generation numbers, so that once a CPU-hotplug event started, it would invoke only those notifiers marked with the generation that was in effect when the event started, or with some earlier generation.

Hey, you asked!!!

Thanx, Paul

#6 lore raw
Quoted 51 lines · Paul E. McKenney
Quoted 18 lines · Peter Zijlstra
Quoted 1 line · Ingo Molnar

Wanna give a short TODO list to anyone wanting to work on that?

I paged out most details again, but it goes something like:

- read and understand the current generic code

- and all architecture code, at which point you'll probably boggle at all the similarities that are all subtly different (there's about 3 actually different ways in the arch code).

- pick one, preferably one that keeps additional state and doesn't fully rely on the online bits and pull it into generic code and provide a small vector of arch specific functions.

- convert all archs over.

Quoted 6 lines

Also related:

- figure out why cpu_down needs kstopmachine, I'm not sure it does.. we should be able to tear down a cpu using synchronize_sched() and a single stop_one_cpu(). (someday when there's time I might actually try to implement this).

Currently, a number of the CPU_DYING notifiers assume that they are running in stop-machine context, including those of RCU.

However, this is not an inherent property of RCU -- DYNIX/ptx's CPU-offline process did not stop the whole machine, after all, and RCU (we called it rclock, but whatever) was happy with this arrangement. In fact, if the outgoing CPU could be made to stop in that context instead of returning to the scheduler and the idle loop, it would make my life a bit easier.

My question is why aren't the notifiers executed in the opposite order going down and coming up, with the coming-up order matching the boot order? Also, why can't the CPU's exit from this world be driven out of the idle loop? That way, the CPU wouldn't mark itself offline (thus in theory to be ignored by CPU), and then immediately dive into the scheduler and who knows what all else, using RCU all the time. ;-)

(RCU handles this by keeping a separate set of books for online CPUs. It considers a CPU online at CPU_UP_PREPARE time, and doesn't consider it offline until CPU_DEAD time. To handle the grace periods between, force_quiescent_state() allows the grace period to run a few jiffies before checking cpu_online_map, which allows a given CPU to safely use RCU for at least one jiffy before marking itself online and for at least one jiffy after marking itself offline.)

Quoted 3 lines

Yet another question is about races between CPU-hotplug events and registering/unregistering cpu notifiers. I don't believe that the current code does what you would like in all cases.

I beg to differ here. There is no race between CPU-hotplug and registering or unregistering of cpu notifiers. The pair cpu_maps_update_begin() and cpu_maps_update_done() is supposed to take care of that right?

Quoted 6 lines

The only way
I can imagine it really working would be to use generation numbers, so that once a CPU-hotplug event started, it would invoke only those notifiers marked with the generation that was in effect when the event started, or with some earlier generation.

Regards,
Srivatsa S. Bhat
IBM Linux Technology Center

#7 lore raw
Quoted 52 lines · Srivatsa S. Bhat
Quoted 51 lines · Paul E. McKenney
Quoted 18 lines · Peter Zijlstra
Quoted 1 line · Ingo Molnar

Wanna give a short TODO list to anyone wanting to work on that?

I paged out most details again, but it goes something like:

- read and understand the current generic code

- and all architecture code, at which point you'll probably boggle at all the similarities that are all subtly different (there's about 3 actually different ways in the arch code).

- pick one, preferably one that keeps additional state and doesn't fully rely on the online bits and pull it into generic code and provide a small vector of arch specific functions.

- convert all archs over.

Quoted 6 lines

Also related:

- figure out why cpu_down needs kstopmachine, I'm not sure it does.. we should be able to tear down a cpu using synchronize_sched() and a single stop_one_cpu(). (someday when there's time I might actually try to implement this).

Currently, a number of the CPU_DYING notifiers assume that they are running in stop-machine context, including those of RCU.

However, this is not an inherent property of RCU -- DYNIX/ptx's CPU-offline process did not stop the whole machine, after all, and RCU (we called it rclock, but whatever) was happy with this arrangement. In fact, if the outgoing CPU could be made to stop in that context instead of returning to the scheduler and the idle loop, it would make my life a bit easier.

My question is why aren't the notifiers executed in the opposite order going down and coming up, with the coming-up order matching the boot order? Also, why can't the CPU's exit from this world be driven out of the idle loop? That way, the CPU wouldn't mark itself offline (thus in theory to be ignored by CPU), and then immediately dive into the scheduler and who knows what all else, using RCU all the time. ;-)

(RCU handles this by keeping a separate set of books for online CPUs. It considers a CPU online at CPU_UP_PREPARE time, and doesn't consider it offline until CPU_DEAD time. To handle the grace periods between, force_quiescent_state() allows the grace period to run a few jiffies before checking cpu_online_map, which allows a given CPU to safely use RCU for at least one jiffy before marking itself online and for at least one jiffy after marking itself offline.)

Quoted 7 lines
Quoted 3 lines

Yet another question is about races between CPU-hotplug events and registering/unregistering cpu notifiers. I don't believe that the current code does what you would like in all cases.

I beg to differ here. There is no race between CPU-hotplug and registering or unregistering of cpu notifiers. The pair cpu_maps_update_begin() and cpu_maps_update_done() is supposed to take care of that right?

Yes, the integrity of the list itself is guaranteed.

Unless I am missing something, cpu_maps_update_begin() does not cover invocation of all of the notifiers (and for good reason). One way to handle this is to register your notifier early at boot time, so that it cannot race with a group of notifications (which is what RCU does). If your code is in a module and needs to track the currently online CPUs, you might be in for a surprise. ;-)

Thanx, Paul

Quoted 11 lines
Quoted 6 lines

The only way
I can imagine it really working would be to use generation numbers, so that once a CPU-hotplug event started, it would invoke only those notifiers marked with the generation that was in effect when the event started, or with some earlier generation.

Regards,
Srivatsa S. Bhat
IBM Linux Technology Center

#8 lore raw
Quoted 3 lines · Paul E. McKenney
Quoted 2 lines · Srivatsa S. Bhat
Quoted 1 line · Paul E. McKenney

On Tue, Jan 31, 2012 at 02:01:56PM +0100, Peter Zijlstra wrote:

[ . . . ]

Quoted 40 lines
Quoted 32 lines
Quoted 32 lines
Quoted 6 lines

Also related:

- figure out why cpu_down needs kstopmachine, I'm not sure it does.. we should be able to tear down a cpu using synchronize_sched() and a single stop_one_cpu(). (someday when there's time I might actually try to implement this).

Currently, a number of the CPU_DYING notifiers assume that they are running in stop-machine context, including those of RCU.

However, this is not an inherent property of RCU -- DYNIX/ptx's CPU-offline process did not stop the whole machine, after all, and RCU (we called it rclock, but whatever) was happy with this arrangement. In fact, if the outgoing CPU could be made to stop in that context instead of returning to the scheduler and the idle loop, it would make my life a bit easier.

My question is why aren't the notifiers executed in the opposite order going down and coming up, with the coming-up order matching the boot order? Also, why can't the CPU's exit from this world be driven out of the idle loop? That way, the CPU wouldn't mark itself offline (thus in theory to be ignored by CPU), and then immediately dive into the scheduler and who knows what all else, using RCU all the time. ;-)

(RCU handles this by keeping a separate set of books for online CPUs. It considers a CPU online at CPU_UP_PREPARE time, and doesn't consider it offline until CPU_DEAD time. To handle the grace periods between, force_quiescent_state() allows the grace period to run a few jiffies before checking cpu_online_map, which allows a given CPU to safely use RCU for at least one jiffy before marking itself online and for at least one jiffy after marking itself offline.)

Quoted 7 lines
Quoted 3 lines

Yet another question is about races between CPU-hotplug events and registering/unregistering cpu notifiers. I don't believe that the current code does what you would like in all cases.

I beg to differ here. There is no race between CPU-hotplug and registering or unregistering of cpu notifiers. The pair cpu_maps_update_begin() and cpu_maps_update_done() is supposed to take care of that right?

Quoted 8 lines

Yes, the integrity of the list itself is guaranteed.

Unless I am missing something, cpu_maps_update_begin() does not cover invocation of all of the notifiers (and for good reason). One way to handle this is to register your notifier early at boot time, so that it cannot race with a group of notifications (which is what RCU does). If your code is in a module and needs to track the currently online CPUs, you might be in for a surprise. ;-)

And never mind -- I was confused... Miscounting underscores yet again. Please accept my apologies for my confusion.

Starting from the top, what does CPU hotplug need to do?

1. preempt_disable() or something similarly lightweight and
unconditional must block removal of any CPU that was in cpu_online_map at the start of the "critical section". (I will identify these as hotplug read-side critical sections.)

I don't believe that there is any prohibition against a CPU appearing suddenly, but some auditing would be required to confirm this. But see below.

2. A subsystem not involved in the CPU-hotplug process must be able
to test if a CPU is online and be guaranteed that this test remains valid (the CPU remains fully functional) for the duration of the hotplug read-side critical section.

3. If a subsystem needs to operate on all currently online CPUs,
then it must participate in the CPU-hotplug process. My belief is that if some code needs to test whether a CPU is present, and needs an "offline" indication to persist, then that code's subsystem must participate in CPU-hotplug operations.

4. There must be a way to register/unregister for CPU-hotplug events.
This is currently cpu_notifier(), register_cpu_notifier(), and unregister_cpu_notifier().

n-1. CPU-hotplug operations should be reasonably fast. Tens of
milliseconds is OK, multiple seconds not so much.

n. (Your additional constraints here.)

How to do this? Here is one possible approach, probably full of holes:

a. Maintain the cpu_online_map, as currently, but the meaning
of a set bit is that the CPU is fully functional. If there is any service that the CPU no longer offers, its bit is cleared.

b. Continue to use preempt_enable()/preempt_disable() to mark
hotplug read-side critical sections.

c. Instead of using __stop_machine(), use a per-CPU variable that
is checked in the idle loop. Possibly another TIF_ bit.

d. The CPU notifiers are like today, except that CPU_DYING() is
invoked by the CPU after it sees that its per-CPU variable telling it to go offline. As today, the CPU_DYING notifiers are invoked with interrupts disabled, but other CPUs are still running. Of course, the CPU_DYING notifiers need to be audited and repaired. There are fewer than 20 of them, so not so bad. RCU's is an easy fix: Just re-introduce locking and the global RCU callback orphanage. My guesses for the others at the end.

e. Getting rid of __stop_machine() means that the final step of the
CPU going offline will no longer be seen as atomic by other CPUs. This will require more careful tracking of dependencies among different subsystems. The required tracking can be reduced by invoking notifiers in registration order for CPU-online operations and invoking them in the reverse of registration order for CPU-offline operations.

For example, the scheduler uses RCU. If notifiers are invoked in the same order for all CPU-hotplug operations, then on CPU-offline operations, during the time between when RCU's notifier is invoked and when the scheduler's notifier is invoked, the scheduler must deal with a CPU on which RCU isn't working. (RCU currently works around this by allowing a one-jiffy time period after notification when it still pays attention to the CPU.)

In contrast, if notifiers are invoked in reverse-registration order for CPU-offline operations, then any time the scheduler sees a CPU as online, RCU also is treating it as online.

f. There will be some circular dependencies. For example, the
scheduler uses RCU, but in some configurations, RCU also uses kthreads. These dependencies must be handled on a case-by-case
basis. For example, the scheduler could invoke an RCU API
to tell RCU when to shut down its per-CPU kthreads and when to start them up. Or RCU could deal with its kthreads in the CPU_DOWN_PREPARE and CPU_ONLINE notifiers. Either way, RCU needs to correctly handle the interval when it cannot use kthreads on a given CPU that it is still handling, for example, by switching to running the RCU core code in softirq context.

g. Most subsystems participating in CPU-hotplug operations will need

	to keep their own copy of CPU online/offline state.  For example,
	RCU uses the ->qsmaskinit fields in the rcu_node structure for
	this purpose.

h. So CPU-offline handling looks something like the following:

i. Acquire the hotplug mutex.

ii. Invoke the CPU_DOWN_PREPARE notifiers. If there
are objections, invoke the CPU_DOWN_FAILED notifiers and return an error.

iii. Clear the CPU's bit in cpu_online_map.

iv. Invoke synchronize_sched() to ensure that all future hotplug
read-side critical sections ignore the outgoing CPU.

v. Set a per-CPU variable telling the CPU to take itself
offline. There would need to be something here to help the CPU get to idle quickly, possibly requiring another round of notifiers. CPU_DOWN?

vi. When the dying CPU gets to the idle loop, it invokes the
CPU_DYING notifiers and updates its per-CPU variable to indicate that it is ready to die. It then spins in a tight loop (or does some other architecture-specified operation to wait to be turned off).

Note that there is no need for RCU to guess how long the CPU might be executing RCU read-side critical sections.

vii. When the task doing the offline operation sees the
updated per-CPU variable, it calls __cpu_die().

viii. The CPU_DEAD notifiers are invoked.

ix. Theeck_for_tasks() function is invoked.

x. Release the hotplug mutex.

xi. Invoke the CPU_POST_DEAD notifiers.

i. I do not believe that the CPU-offline handling needs to change
much.

CPU_DYING notifiers as of 3.2:

o vfp_hotplug(): I believe that this works as-is.
o s390_nohz_notify(): I believe that this works as-is.
o x86_pmu_notifier(): I believe that this works as-is.
o perf_ibs_cpu_notifier(): I don't know enough about
APIC to say.
o tboot_cpu_callback(): I believe that this works as-is,
but this one returns NOTIFY_BAD to a CPU_DYING notifier, which is badness. But it looks like that case is a "cannot happen" case. Still needs to be fixed.
o clockevents_notify(): This one acquires a global lock,
so it should be safe as-is.
o console_cpu_notify(): This one takes the same action
for CPU_ONLINE, CPU_DEAD, CPU_DOWN_FAILED, and CPU_UP_CANCELLED that it does for CPU_DYING, so it should be OK.
o rcu_cpu_notify(): This one needs adjustment as noted
above, but nothing major.
o migration_call(): I defer to Peter on this one.

	It looks to me like it is written to handle other
	CPUs, but...

o workqueue_cpu_callback(): Might need help, does a
non-atomic OR.
o kvm_cpu_hotplug(): Uses a global spinlock, so should
be OK as-is.

Thoughts?

Thanx, Paul

#9 lore raw
In reply to Ingo Molnar
Quoted 2 lines · On Tue, 31 Jan 2012 13:53:32 +0100 Ingo Molnar <[email protected]> wrote:

Wanna give a short TODO list to anyone wanting to work on that?

the biggest thing that needs to happen is splitting the hardware specific part ("bring the chip up") and the OS specific part of cpu_up() ("get the cpu into our accounting/awareness").

the former does not need the hotplug or any other big lock (just a state machine), the later needs the hotplug lock for obvious reasons. The former is the part that takes a long time (> 100msec for a first cpu in a package, > 30msec for second and later), the later is quick.

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#10 lore raw
In reply to Ingo Molnar
Quoted 5 lines · On Tue, 31 Jan 2012 13:43:41 +0100 Ingo Molnar <[email protected]> wrote:

arch/x86/kernel/smpboot.c do_rest: · line 790

Quoted 1 line
arch/x86/kernel/smpboot.c +1 -0
+			usleep_range(100, 200);

I'm wondering whether we could shorten this delay to say 10 usecs and thus save 0.1 msecs (or more) from a typical SMP bootup?

doesn't matter really; bringing up a cpu is several orders more expensive (> 100msec in 3.2, in 3.3 this got optimized to maybe 30 msec) 0.1 msec is the least of anyone's worries at this point ;-)

(would be nice if this was a completion, but this is rather fragile code in general... at least not making it spin is an incremental improvement)

#11 lore raw
Quoted 9 lines · Arjan van de Ven
Quoted 5 lines · On Tue, 31 Jan 2012 13:43:41 +0100 Ingo Molnar <[email protected]> wrote:

arch/x86/kernel/smpboot.c do_rest: · line 790

Quoted 1 line
arch/x86/kernel/smpboot.c +1 -0
+			usleep_range(100, 200);

I'm wondering whether we could shorten this delay to say 10 usecs and thus save 0.1 msecs (or more) from a typical SMP bootup?

doesn't matter really; [...]

It matters somewhat, especially if PeterZ's suggestion is used, which is far more clean as well. The magic delays are not really justified anymore.

Quoted 3 lines

[...] bringing up a cpu is several orders more expensive (> 100msec in 3.2, in 3.3 this got optimized to maybe 30 msec) 0.1 msec is the least of anyone's worries at this point ;-)

It's 3% of the 30 msecs overhead.

Quoted 3 lines

( would be nice if this was a completion, but this is rather fragile code in general... at least not making it spin is an incremental improvement )

Completions arent hard to use and the scheduler should be up and running at this stage already.

Thanks,

Ingo