HWMON: DA9052/53 hwmon driver v2
Subsystems (3)
PATCH 1/1 HWMON: DA9052/53 hwmon driver v2
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits resolution and 10 channels.
This patch montiors the DA9052 PMIC's ADC channels mostly for battery parameters like battery temperature, junction temperature, battery current etc.
This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by David Dajun Chen <[email protected]>
Signed-off-by Ashish Jangam <[email protected]>
---
Changes since v1
- Update documentation file for url
- Modify the entry in Kconfig file
- Correct reporting of junction temperature
- Add conversion function for backup battery voltage
- Change labels for temperatures in the device attributes to follow sensor index
--- Documentation/hwmon/da9052 | 62 ++++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/da9052-hwmon.c | 344 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 417 insertions(+), 0 deletions(-) create mode 100644 Documentation/hwmon/da9052 create mode 100644 drivers/hwmon/da9052-hwmon.c
Documentation/hwmon/da9052 new file +62 -0
@@ -0,0 +1,62 @@ +Supported chips: + * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs + Prefix: 'da9052' + Datasheet: Kindly visit www.dialog-semiconductor.com/product_table.php + and request for the official datasheet. + +Authors: David Dajun Chen <[email protected]> + +Description +----------- + +The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits +resolution and track and hold circuitry combined with an analogue input +multiplexer. The analogue input multiplexer will allow conversion of up to 10 +different inputs. The track and hold circuit ensures stable input voltages at +the input of the ADC during the conversion. + +The ADC is used to measure the following inputs: +Channel 0: VDDOUT - measurement of the system voltage +Channel 1: ICH - internal battery charger current measurement +Channel 2: TBAT - output from the battery NTC +Channel 3: VBAT - measurement of the battery voltage +Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7: XY - TSI interface to measure the X and Y voltage of the touch +screen resistive potentiometers +Channel 8: Internal Tjunc. - sense (internal temp. sensor) +Channel 9: VBBAT - measurement of the backup battery voltage + +By using sysfs attributes we can measure the system voltage VDDOUT, the battery +charging current ICH, battery temperature TBAT, battery junction temperature +TJUNC, battery voltage VBAT and the back up battery voltage VBBAT. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 10 bit ADC. + +The battery voltage is calculated as: + Milli volt = ((ADC value * 1000) / 512) + 2500 + +The backup battery voltage is calculated as: + Milli volt = (ADC value * 2500) / 512; + +The voltages on ADC channels 4, 5 and 6 are calculated as: + Milli volt = (ADC value * 2500) / 1023 + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures +are monitored by the ADC channels. + +The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +The junction temperature attribute is supported by the driver. + +The battery temperature is calculated: + Degree Celcius = 1 / (t1 + 1/298)- 273 +where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) +Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
drivers/hwmon/Kconfig +10 -0
@@ -313,6 +313,16 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DA9052_ADC + tristate "Dialog DA9052/DA9053 ADC" + depends on PMIC_DA9052 + help + Say y here to support the ADC found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" depends on ARCH_EXYNOS4
drivers/hwmon/Makefile +1 -0
@@ -42,6 +42,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
drivers/hwmon/da9052-hwmon.c new file +344 -0
344 lines not on this page · raw message
Quoted 11 lines · Ashish Jangam
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits resolution and 10 channels.
This patch montiors the DA9052 PMIC's ADC channels mostly for battery parameters like battery temperature, junction temperature, battery current etc.
This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by David Dajun Chen <[email protected]>Signed-off-by Ashish Jangam <[email protected]>
Ashish,
at first glance looks good. I am about to be travelling for a week; I'll get back afterwards unless Jean picks it up from here. No hurry, though, since the next release is still a bit out.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 4 lines · Ashish Jangam
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits resolution and 10 channels.
This patch montiors the DA9052 PMIC's ADC channels mostly for battery
s/montiors/monitors/
Quoted 29 lines
parameters like battery temperature, junction temperature, battery current etc.
This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by David Dajun Chen <[email protected]>Signed-off-by Ashish Jangam <[email protected]>---
Changes since v1
- Update documentation file for url
- Modify the entry inKconfigfile
- Correct reporting of junction temperature
- Add conversion function for backup battery voltage
- Change labels for temperatures in the device attributes to follow sensor index--- Documentation/hwmon/da9052 | 62 ++++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/da9052-hwmon.c | 344 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 417 insertions(+), 0 deletions(-) create mode 100644 Documentation/hwmon/da9052 create mode 100644 drivers/hwmon/da9052-hwmon.cDocumentation/hwmon/da9052 new file +0
-0
Documentation/hwmon/da9052 line 6
Quoted 6 lines
Documentation/hwmon/da9052 new file +6
-0@@ -0,0 +1,62 @@ +Supported chips: + * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs + Prefix: 'da9052' + Datasheet: Kindly visit www.dialog-semiconductor.com/product_table.php + and request for the official datasheet. +
Not really. From practical experience, the datasheet is not available except for Dialog Semiconductor customers - not even for me to review the driver (and that appears to be independent of my employer's relationship with Dialog Semiconductor). I think this should read "not publicly available". It is a bit misleading to suggest that it would be available if that is not the case.
Quoted 11 lines
Documentation/hwmon/da9052 new file +11
-0+Authors: David Dajun Chen <[email protected]> + +Description +----------- + +The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits +resolution and track and hold circuitry combined with an analogue input +multiplexer. The analogue input multiplexer will allow conversion of up to 10 +different inputs. The track and hold circuit ensures stable input voltages at +the input of the ADC during the conversion. +
Documentation/hwmon/da9052 line 27
Quoted 10 lines
Documentation/hwmon/da9052 new file +10
-0+The ADC is used to measure the following inputs: +Channel 0: VDDOUT - measurement of the system voltage +Channel 1: ICH - internal battery charger current measurement +Channel 2: TBAT - output from the battery NTC +Channel 3: VBAT - measurement of the battery voltage +Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7: XY - TSI interface to measure the X and Y voltage of the touch +screen resistive potentiometers
Formatting is a bit off here.
Quoted 109 lines
Documentation/hwmon/da9052 new file +35
-0+Channel 8: Internal Tjunc. - sense (internal temp. sensor) +Channel 9: VBBAT - measurement of the backup battery voltage + +By using sysfs attributes we can measure the system voltage VDDOUT, the battery +charging current ICH, battery temperature TBAT, battery junction temperature +TJUNC, battery voltage VBAT and the back up battery voltage VBBAT. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 10 bit ADC. + +The battery voltage is calculated as: + Milli volt = ((ADC value * 1000) / 512) + 2500 + +The backup battery voltage is calculated as: + Milli volt = (ADC value * 2500) / 512; + +The voltages on ADC channels 4, 5 and 6 are calculated as: + Milli volt = (ADC value * 2500) / 1023 + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures +are monitored by the ADC channels. + +The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +The junction temperature attribute is supported by the driver. + +The battery temperature is calculated: + Degree Celcius = 1 / (t1 + 1/298)- 273 +where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) +Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.drivers/hwmon/Kconfig +10
-0@@ -313,6 +313,16 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DA9052_ADC + tristate "Dialog DA9052/DA9053 ADC" + depends on PMIC_DA9052 + help + Say y here to support the ADC found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" depends on ARCH_EXYNOS4drivers/hwmon/Makefile +1
-0@@ -42,6 +42,7 @@ obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.odrivers/hwmon/da9052-hwmon.c new file +35
-0@@ -0,0 +1,344 @@ +/* +* HWMON Driver for Dialog DA9052 +* +* Copyright(c) 2012 Dialog Semiconductor Ltd. +* +* Author: David Dajun Chen <[email protected]> +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +struct da9052_hwmon { +struct da9052 *da9052; +struct device *class_device; +struct mutex hwmon_lock; +}; + +static const char *const input_names[] = { + [DA9052_ADC_VDDOUT ] ="VDDOUT" ,
drivers/hwmon/da9052-hwmon.c line 45
Quoted 10 lines
drivers/hwmon/da9052-hwmon.c new file +10
-0+ [DA9052_ADC_ICH] = "CHARGING CURRENT", + [DA9052_ADC_TBAT] = "BATTERY TEMP", + [DA9052_ADC_VBAT] = "BATTERY VOLTAGE", + [DA9052_ADC_IN4] = "ADC IN4", + [DA9052_ADC_IN5] = "ADC IN5", + [DA9052_ADC_IN6] = "ADC IN6", + [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP", + [DA9052_ADC_VBBAT] = "BACK-UP BATTERY VOLTAGE", +}; +
Where are those defines, or, in other words, which repository/branch is your patch based on ? I don't see it in the current mainline kernel.
Quoted 86 lines
drivers/hwmon/da9052-hwmon.c new file +86
-0+/* Conversion function for VDDOUT and VBAT */ +static inline int volt_reg_to_mV (int value) +{ +return ((value *1000 ) /512 ) +2500 ; +} + +/* Conversion function for ADC channels 4, 5 and 6 */ +static inline int input_reg_to_mV (int value) +{ +return (value *2500 ) /1023 ; +} + +/* Conversion function for VBBAT */ +static inline int vbbat_reg_to_mV (int value) +{ +return (value *2500 ) /512 ; +} + +static int da9052_enable_vddout_channel (struct da9052 *da9052) +{ +int ret; + + ret =da9052_reg_read (da9052,DA9052_ADC_CONT_REG ); +if (ret <0 ) +return ret; + + ret |=DA9052_ADCCONT_AUTOVDDEN ; + +return da9052_reg_write (da9052,DA9052_ADC_CONT_REG , ret); +} + +static int da9052_disable_vddout_channel (struct da9052 *da9052) +{ +int ret; + + ret =da9052_reg_read (da9052,DA9052_ADC_CONT_REG ); +if (ret <0 ) +return ret; + + ret &= ~DA9052_ADCCONT_AUTOVDDEN ; + +return da9052_reg_write (da9052,DA9052_ADC_CONT_REG , ret); +} + +static ssize_t da9052_read_vddout (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int ret, vdd; + +mutex_lock (&hwmon->hwmon_lock); + + ret =da9052_enable_vddout_channel (hwmon->da9052); +if (ret <0 ) + goto hwmon_err; + + vdd =da9052_reg_read (hwmon->da9052,DA9052_VDD_RES_REG ); +if (vdd <0 ) { + ret = vdd; + goto hwmon_err_release; + } + + ret =da9052_disable_vddout_channel (hwmon->da9052); +if (ret <0 ) + goto hwmon_err; + +mutex_unlock (&hwmon->hwmon_lock); +return sprintf (buf,"%d\n" ,volt_reg_to_mV (vdd)); + +hwmon_err_release: +da9052_disable_vddout_channel (hwmon->da9052); +hwmon_err: +mutex_unlock (&hwmon->hwmon_lock); +return ret; +} + +static ssize_t da9052_read_ich (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int ret; + + ret =da9052_reg_read (hwmon->da9052,DA9052_ICHG_AV_REG ); +if (ret <0 ) +return ret; +
drivers/hwmon/da9052-hwmon.c line 141
Quoted 10 lines
drivers/hwmon/da9052-hwmon.c new file +10
-0+/* Equivalent to 3.9mA/bit in register ICHG_AV */ +return sprintf (buf,"%d\n" ,DIV_ROUND_CLOSEST (ret *39 ,10 )); +} + +static ssize_t da9052_read_tbat (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); + +return sprintf (buf,"%d\n" ,da9052_adc_read_temp (hwmon->da9052));
From other code in the upstream kernel, this function can return an error code, which you should check.
Oddly enough, I find the call to da9052_adc_read_temp() in the upstream kernel, but not the function itself. Is there something missing in the upstream kernel ?
drivers/hwmon/da9052-hwmon.c line 150
Quoted 9 lines
drivers/hwmon/da9052-hwmon.c new file +9
-0+} + +static ssize_t da9052_read_vbat (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int ret; + + ret =da9052_adc_manual_read (hwmon->da9052,DA9052_ADC_VBAT );
Again, I find this function called in the upstream kernel, but not defined. Odd.
Quoted 186 lines
drivers/hwmon/da9052-hwmon.c new file +184
-0+if (ret <0 ) +return ret; + +return sprintf (buf,"%d\n" ,volt_reg_to_mV (ret)); +} + +static ssize_t da9052_read_misc_channel (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int channel =to_sensor_dev_attr (devattr)->index; +int ret; + + ret =da9052_adc_manual_read (hwmon->da9052, channel); +if (ret <0 ) +return ret; + +return sprintf (buf,"%d\n" ,input_reg_to_mV (ret)); +} + +static ssize_t da9052_read_tjunc (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int tjunc; +int toffset; + + tjunc =da9052_reg_read (hwmon->da9052,DA9052_TJUNC_RES_REG ); +if (tjunc <0 ) +return tjunc; + + toffset =da9052_reg_read (hwmon->da9052,DA9052_T_OFFSET_REG ); +if (toffset <0 ) +return toffset; + +/* +* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +* T_OFFSET is a trim value used to improve accuracy of the result +*/ +return sprintf (buf,"%d\n" ,1708 * (tjunc - toffset) -108800 ); +} + +static ssize_t da9052_read_vbbat (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +struct da9052_hwmon *hwmon =dev_get_drvdata (dev); +int ret; + + ret =da9052_adc_manual_read (hwmon->da9052,DA9052_ADC_VBBAT ); +if (ret <0 ) +return ret; + +return sprintf (buf,"%d\n" ,vbbat_reg_to_mV (ret)); +} + +static ssize_t da9052_hwmon_show_name (struct device *dev, +struct device_attribute *devattr, +char *buf) +{ +return sprintf (buf,"da9052-hwmon\n" ); +} + +static ssize_t show_label (struct device *dev, +struct device_attribute *devattr,char *buf) +{ +return sprintf (buf,"%s\n" , + input_names[to_sensor_dev_attr (devattr)->index]); +} + +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9052_read_vddout, NULL, + DA9052_ADC_VDDOUT); +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, + DA9052_ADC_VDDOUT); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9052_read_vbat, NULL, + DA9052_ADC_VBAT); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, + DA9052_ADC_VBAT); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN4); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN4); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN5); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN5); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN6); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN6); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, da9052_read_vbbat, NULL, + DA9052_ADC_VBBAT); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, + DA9052_ADC_VBBAT); + +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL, + DA9052_ADC_ICH); +static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL, + DA9052_ADC_ICH); + +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tbat, NULL, + DA9052_ADC_TBAT); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + DA9052_ADC_TBAT); +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, da9052_read_tjunc, NULL, + DA9052_ADC_TJUNC); +static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_label, NULL, + DA9052_ADC_TJUNC); + +static DEVICE_ATTR(name, S_IRUGO, da9052_hwmon_show_name, NULL); + +static struct attribute *da9052_attr[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp8_input.dev_attr.attr, + &sensor_dev_attr_temp8_label.dev_attr.attr, +NULL +}; + +static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr}; + +static int __init da9052_hwmon_probe (struct platform_device *pdev) +{ +struct da9052_hwmon *hwmon; +int ret; + + hwmon =devm_kzalloc (&pdev->dev,sizeof (struct da9052_hwmon ), +GFP_KERNEL ); +if (!hwmon) +return -ENOMEM ; + +mutex_init (&hwmon->hwmon_lock); + hwmon->da9052 =dev_get_drvdata (pdev->dev.parent); + +platform_set_drvdata (pdev, hwmon); + + ret =sysfs_create_group (&pdev->dev.kobj, &da9052_attr_group); +if (ret) + goto err_mem; + + hwmon->class_device =hwmon_device_register (&pdev->dev); +if (IS_ERR (hwmon->class_device)) { + ret =PTR_ERR (hwmon->class_device); + goto err_sysfs; + } + +return 0 ; + +err_sysfs: +sysfs_remove_group (&pdev->dev.kobj, &da9052_attr_group); +err_mem: +return ret; +} + +static int __devexit da9052_hwmon_remove(struct platform_device *pdev) +{ +struct da9052_hwmon *hwmon =platform_get_drvdata (pdev); + +hwmon_device_unregister (hwmon->class_device); +sysfs_remove_group (&pdev->dev.kobj, &da9052_attr_group); + +return 0 ; +} + +static struct platform_driver da9052_hwmon_driver = { + .probe = da9052_hwmon_probe, + .remove =__devexit_p (da9052_hwmon_remove), + .driver = { + .name ="da9052-hwmon" ,
drivers/hwmon/da9052-hwmon.c line 344
Quoted 10 lines
drivers/hwmon/da9052-hwmon.c new file +10
-0+ .owner = THIS_MODULE, + }, +}; + +module_platform_driver (da9052_hwmon_driver); + +MODULE_AUTHOR ("David Dajun Chen <[email protected]>" ); +MODULE_DESCRIPTION ("DA9052 HWMON driver" ); +MODULE_LICENSE ("GPL" ); +MODULE_ALIAS ("platform:da9052-hwmon" );
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors