Skip to contentSkip to conversation

Lost ps/2 input in 3.2.5 (aka PCI: Rework ASPM disable code)

DISCUSSION Jiri Slaby 4 participants 4 messages Feb 22, 2012 – Feb 23, 2012 HID

lore
Share & tools
lore

Jiri Slaby

author
#0 lore raw

Hi,

so I finally decided to commit 3.2.5 into the opensuse kernel. However it does not even work on my laptop.

Both keyboard and touchpad are not detected. They are connected via PS/2.

I see
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

Without that patch this warning is gone and devices properly enumerated.

thanks,

Signature · 2 lines
js
suse labs
#1 lore raw
Quoted 5 lines · On Wed, 22 Feb 2012 20:24:22 +0100 Jiri Slaby <[email protected]> wrote:

Hi,

so I finally decided to commit 3.2.5 into the opensuse kernel. However it does not even work on my laptop.

Quoted 7 lines

Both keyboard and touchpad are not detected. They are connected via PS/2.

I see
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

Without that patch this warning is gone and devices properly enumerated.

Does it also work if you pass pcie_aspm=off when you boot?

Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
#2 lore raw
Quoted 10 lines · Jesse Barnes
Quoted 7 lines · On Wed, 22 Feb 2012 20:24:22 +0100 Jiri Slaby <[email protected]> wrote:

Hi,

so I finally decided to commit 3.2.5 into the opensuse kernel. However it does not even work on my laptop.

Both keyboard and touchpad are not detected. They are connected via PS/2.

Quoted 7 lines
Quoted 5 lines

I see
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

Without that patch this warning is gone and devices properly enumerated.

Does it also work if you pass pcie_aspm=off when you boot?

I thought Matthew had a patch queued up for 3.3-final that would fix this. Matthew, what happened to that?

greg k-h