input: psmouse: create an 'enabled' sysfs attribute to squelch mouse
Subsystems (2)
PATCH 1/1 input: psmouse: create an 'enabled' sysfs attribute to squelch mouse
From: Paul Fox <[email protected]>
on OLPC XO laptops, at least one model of touchpad (sentelic) emits continuous jittery motion reports when the laptop is configured in "ebook" mode. the touchpad is inaccessible in that configuration, so we simply disable it.
these motion reports will wake the SoC when put to sleep, so simply ignoring the events is not a possibilty; the device must be disabled.
[[email protected]: drop psmouse_resync changes, add attribute comment,
and add psmouse_cleanup workaround]
--- drivers/input/mouse/psmouse-base.c | 20 ++++++++++++++++++-- drivers/input/mouse/psmouse.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-)
drivers/input/mouse/psmouse-base.c +18 -2
@@ -87,6 +87,13 @@ PSMOUSE_DEFINE_ATTR(resetafter, S_IWUSR | S_IRUGO,PSMOUSE_DEFINE_ATTR (resync_time,S_IWUSR |S_IRUGO , (void *) offsetof(struct psmouse , resync_time), psmouse_show_int_attr, psmouse_set_int_attr); +/* +* There's no need for a custom handler for the 'enabled' attr; +* psmouse_attr_set_helper will take care of disabling and enabling for us. +*/ +PSMOUSE_DEFINE_ATTR (enabled,S_IWUSR |S_IRUGO , + (void *) offsetof(struct psmouse , enabled), + psmouse_show_int_attr, psmouse_set_int_attr);static struct attribute *psmouse_attributes[] = { &psmouse_attr_protocol.dattr.attr,
@@ -94,6 +101,7 @@ static struct attribute *psmouse_attributes[] = { &psmouse_attr_resolution.dattr.attr, &psmouse_attr_resetafter.dattr.attr, &psmouse_attr_resync_time.dattr.attr, + &psmouse_attr_enabled.dattr.attr, NULL };
@@ -1094,6 +1102,9 @@ static void psmouse_initialize(struct psmouse *psmouse)int psmouse_activate (struct psmouse *psmouse) { +if (!psmouse->enabled) +return 0 ; +if (ps2_command (&psmouse->ps2dev,NULL ,PSMOUSE_CMD_ENABLE )) {psmouse_warn (psmouse,"Failed to enable mouse on %s\n" , psmouse->ps2dev.serio->phys);
@@ -1256,7 +1267,8 @@ static void psmouse_cleanup(struct serio *serio)* Some boxes, such as HP nx7400, get terribly confused if mouse * is not fully enabled before suspending/shutting down. */ -ps2_command (&psmouse->ps2dev,NULL ,PSMOUSE_CMD_ENABLE ); +if (psmouse->enabled) +ps2_command (&psmouse->ps2dev,NULL ,PSMOUSE_CMD_ENABLE );if (parent) {if (parent->pt_deactivate)
@@ -1418,6 +1430,7 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse->resolution = psmouse_resolution; psmouse->resetafter = psmouse_resetafter; psmouse->resync_time = parent ?0 : psmouse_resync_time; + psmouse->enabled = true; psmouse->smartscroll = psmouse_smartscroll;psmouse_switch_protocol (psmouse,NULL );
@@ -1516,7 +1529,10 @@ static int psmouse_reconnect(struct serio *serio)if (parent && parent->pt_activate) parent->pt_activate (parent); -psmouse_activate (psmouse); +if (psmouse->enabled) +psmouse_activate (psmouse); +else +psmouse_deactivate (psmouse); rc =0 ; out:
drivers/input/mouse/psmouse.h +1 -0
@@ -62,6 +62,7 @@ struct psmouse {unsigned int resolution;unsigned int resetafter;unsigned int resync_time; +bool enabled;bool smartscroll;/* Logitech only */ psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse);
Signature · 1 line
1.7.2.5
Dmitry Torokhov
maintainerHi Andres,
Quoted 10 lines · Andres Salomon
From: Paul Fox <[email protected]>
on OLPC XO laptops, at least one model of touchpad (sentelic) emits continuous jittery motion reports when the laptop is configured in "ebook" mode. the touchpad is inaccessible in that configuration, so we simply disable it.
these motion reports will wake the SoC when put to sleep, so simply ignoring the events is not a possibilty; the device must be disabled.
Can you switch the AUX serio port into manual bind mode (viqa sysfs) and simply connect/disconnect the touchpad as needed (again via sysfs)?
Thanks.
Signature · 1 line
Dmitry
Quoted 11 lines · On Fri, 24 Feb 2012 00:21:58 -0800 Dmitry Torokhov <[email protected]>…
Hi Andres,
Quoted 8 lines · Andres Salomon
From: Paul Fox <[email protected]>
on OLPC XO laptops, at least one model of touchpad (sentelic) emits continuous jittery motion reports when the laptop is configured in "ebook" mode. the touchpad is inaccessible in that configuration, so we simply disable it.
Quoted 8 lines
Quoted 3 lines
these motion reports will wake the SoC when put to sleep, so simply ignoring the events is not a possibilty; the device must be disabled.
Can you switch the AUX serio port into manual bind mode (viqa sysfs) and simply connect/disconnect the touchpad as needed (again via sysfs)?
Thanks for the suggestion. We're in the process of testing that; it does stop the touchpad from transmitting data, but there are some reinit issues to be investigated. Quoth pgf, "the added latency due to the reinit when we enter/exit ebook mode might or might not be acceptable. and our touchpad (sentelic) needs some boot time initialization from user-level -- we're not sure whether we'll need to redo some or all of that. (we do seem to lose the current values of vscroll and hscroll, for instance.)"