Skip to contentSkip to conversation

mesa3d fails

Buildroot Ismael Luceno 2 participants 5 messages Feb 28, 2012 – Mar 1, 2012

lore
Share & tools
lore

Ismael Luceno

author
#0 lore raw

I'm getting the following error:

Quoted 4 lines

checking for LIBDRM... configure: error: Package requirements (libdrm >= 2.4.3) were not met:

No package 'libdrm' found

<...>

But libdrm 2.4.19 is installed... anyone ran into this?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120228/97b6fb0d/attachment.asc>

#1 lore raw
Quoted 9 lines · On Tuesday 28 February 2012 22:02:31 Ismael Luceno wrote:

I'm getting the following error:

Quoted 4 lines

checking for LIBDRM... configure: error: Package requirements (libdrm >= 2.4.3) were not met:

No package 'libdrm' found

<...>

But libdrm 2.4.19 is installed... anyone ran into this?

Works for me... Does config.log report anything about why it fails?
Is configure called with the correct PKG_CONFIG variable? Can you do a host/usr/bin/pkg-config --list-all to see if it finds libdrm?

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
author
#2 lore raw
Quoted 6 lines · On Tue, 28 Feb 2012 23:04:16 +0000 Arnout Vandecappelle <[email protected]> wrote:
Quoted 5 lines · On Tuesday 28 February 2012 22:02:31 Ismael Luceno wrote:

I'm getting the following error:

Quoted 3 lines

checking for LIBDRM... configure: error: Package requirements (libdrm >= 2.4.3) were not met:

Quoted 9 lines
Quoted 4 lines
Quoted 1 line

No package 'libdrm' found

<...>

But libdrm 2.4.19 is installed... anyone ran into this?

Works for me... Does config.log report anything about why it fails?
Is configure called with the correct PKG_CONFIG variable? Can you do a host/usr/bin/pkg-config --list-all to see if it finds libdrm?

  $ ./output/host/usr/bin/pkg-config --modversion libdrm
  2.4.19

Since mesa3d is using AUTOTARGETS, I guess it's getting the right
PKG_CONFIG. I'll check tomorrow, to be sure.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120229/4642a4f5/attachment.asc>

#3 lore raw
Quoted 10 lines · On Wednesday 29 February 2012 04:08:44 Ismael Luceno wrote:
Quoted 4 lines

Works for me... Does config.log report anything about why it fails?
Is configure called with the correct PKG_CONFIG variable? Can you do a host/usr/bin/pkg-config --list-all to see if it finds libdrm?

  $ ./output/host/usr/bin/pkg-config --modversion libdrm
  2.4.19

Since mesa3d is using AUTOTARGETS, I guess it's getting the right PKG_CONFIG. I'll check tomorrow, to be sure.

Maybe you can hack mesa3d's configure to print PKG_CONFIG, and the exact
pkg-config command used for libdrm.

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
author
#4 lore raw
Quoted 7 lines · On Wed, 29 Feb 2012 23:17:54 +0000 Arnout Vandecappelle <[email protected]> wrote:
Quoted 6 lines · On Wednesday 29 February 2012 04:08:44 Ismael Luceno wrote:
Quoted 5 lines

Works for me... Does config.log report anything about why it
fails? Is configure called with the correct PKG_CONFIG variable? Can you do a host/usr/bin/pkg-config --list-all to see if it finds libdrm?

Quoted 8 lines
Quoted 5 lines
  $ ./output/host/usr/bin/pkg-config --modversion libdrm
  2.4.19

Since mesa3d is using AUTOTARGETS, I guess it's getting the right PKG_CONFIG. I'll check tomorrow, to be sure.

Maybe you can hack mesa3d's configure to print PKG_CONFIG, and the
exact pkg-config command used for libdrm.

Weird... this time it worked. Maybe something got corrupted last
time... sadly I didn't kept a copy :(.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120229/8f9d533a/attachment.asc>