Skip to contentSkip to conversation

Armada100: gplugD: Add FAT & EXT2 command support

PATCH New Ajay Bhargav 3 participants 3 messages Feb 13, 2012 – Mar 2, 2012

lore
Share & tools
lore

Ajay Bhargav

author
#0 lore raw

PATCH 1/1 Armada100: gplugD: Add FAT & EXT2 command support

This patch adds FAT and ext2 command support for marvell gplugD

Signed-off-by Ajay Bhargav <[email protected]>
---
 include/configs/gplugd.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/gplugd.h +2 -0
index 061ebe6..462cc7e 100644
@@ -73,6 +73,8 @@
 #define CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Disable DCACHE */
 #define CONFIG_SYS_DCACHE_OFF
Signature · 1 line
1.7.7.2
#1 lore raw

PATCH 1/1 Armada100: gplugD: Add FAT & EXT2 command support

Quoted 30 lines

-----Original Message-----
From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
Sent: 13 February 2012 19:01
To: Prafulla Wadaskar
Cc: marek.vasut at gmail.com; u-boot at lists.denx.de; Ajay Bhargav
Subject: [PATCH] Armada100: gplugD: Add FAT & EXT2 command support

This patch adds FAT and ext2 command support for marvell gplugD

Signed-off-by Ajay Bhargav <[email protected]>
---
 include/configs/gplugd.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/gplugd.h +2 -1
index 061ebe6..462cc7e 100644
@@ -73,6 +73,8 @@
 #define CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Disable DCACHE */
 #define CONFIG_SYS_DCACHE_OFF
--
Quoted 1 line

1.7.7.2

Applied to u-boot-marvell.git next branch

Regards..
Prafulla . . .

#2 lore raw

PATCH 1/1 Armada100: gplugD: Add FAT & EXT2 command support

Quoted 31 lines
Quoted 31 lines

-----Original Message-----
From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
Sent: 13 February 2012 19:01
To: Prafulla Wadaskar
Cc: marek.vasut at gmail.com; u-boot at lists.denx.de; Ajay Bhargav
Subject: [PATCH] Armada100: gplugD: Add FAT & EXT2 command support

This patch adds FAT and ext2 command support for marvell gplugD

Signed-off-by Ajay Bhargav <[email protected]>

---

 include/configs/gplugd.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/gplugd.h +2 -0
index 061ebe6..462cc7e 100644
@@ -73,6 +73,8 @@
 
 #define CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #define CONFIG_CMD_USB
 
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT

/* Disable DCACHE */
#define CONFIG_SYS_DCACHE_OFF

Quoted 7 lines
Quoted 2 lines

--
1.7.7.2

Applied to u-boot-marvell.git next branch

Regards..
Prafulla . . .

Ok, dropping them as I see you picked them all. Thanks for picking them up, Prafulla.

M