Skip to contentSkip to conversation

IPTable Rules... again

DISCUSSION [email protected] 2 participants 2 messages Mar 8, 2012

lore
Share & tools
lore
#0 lore raw

Hi,

I have the following  rules on my router/gateway:

*nat
:PREROUTING ACCEPT
:INPUT ACCEPT
:OUTPUT ACCEPT
:POSTROUTING ACCEPT
-A POSTROUTING -d 93.186.25.52/32 -m comment --comment "bb" -j SNAT --to-source 41.94.39.49-41.94.39.51
-A POSTROUTING -s 10.0.0.0/8 -p tcp -m tcp --dport 53 -m comment --comment "domain" o eth0 -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.0/8 -p udp -m udp --dport 53 -m comment --comment "domain" -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.0/8 -p tcp -m tcp --dport 995 -m comment --comment "pop3s" -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.0/8 -p udp -m udp --dport 995 -m comment --comment "pop3s" -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.0/8 -p tcp -m tcp --dport 587 -m comment --comment "submission" -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.0/8 -p udp -m udp --dport 587 -m comment --comment "submission" -j SNAT --to-source 41.94.39.49-41.94.39.51 -A POSTROUTING -s 10.0.0.3/32 -j o eth0 -j SNAT --to-source 41.94.39.49-41.94.39.51
COMMIT
*filter
:INPUT ACCEPT
:FORWARD ACCEPT
:OUTPUT ACCEPT
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -p icmp -j ACCEPT
-A FORWARD -i lo -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 53 -m comment --comment "domain" -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p udp -m udp --dport 53 -m comment --comment "domain" -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 995 -m comment --comment "pop3s" -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p udp -m udp --dport 995 -m comment --comment "pop3s" -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 587 -m comment --comment "submission" -j ACCEPT
-A FORWARD -i eth1 -o eth0 -p udp -m udp --dport 587 -m comment --comment "submission" -j ACCEPT
-A FORWARD -s 10.0.0.3/32 -i eth1 -o eth0 -j ACCEPT
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT

for some reason I can't make a connection to the external mail server from inside the lan. even from the 10.0.0.3 address which should be allowed to do anything. everything used to work when i used MASQUERADing but stopped once i switched to SNAT.
Can anybody help me? What am I doing wrong??

Thanks

#1 lore raw

Review

Quoted 13 lines · On Thu, 2012-03-08 at 10:16 -0500, [email protected] wrote:

Hi,

I have the following rules on my router/gateway:

*nat
:PREROUTING ACCEPT
:INPUT ACCEPT
:OUTPUT ACCEPT
:POSTROUTING ACCEPT

(quoted diff) +0 -3
-A POSTROUTING -d 93.186.25.52/32 -m comment --comment "bb" -j SNAT --to-source 41.94.39.49-41.94.39.51
 
-A POSTROUTING -s 10.0.0.0/8 -p tcp -m tcp --dport 53 -m comment
--comment "domain" o eth0 -j SNAT --to-source 41.94.39.49-41.94.39.51

^^^^ Is this what you really have? Or is it a typo
in your email? Obviously it should be "-o" not "o"

Quoted 2 lines

-A POSTROUTING -s 10.0.0.3/32 -j o eth0 -j SNAT --to-source 41.94.39.49-41.94.39.51

Have you tried removing all the other SNAT lines apart from this one? And also seeing if this is definitely matching by setting a LOG target first?

<snip>

Quoted 1 line

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

Does it work if you remove this line?

Everything else looks fine to me, assuming that all your IP addresses etc. are correct.

Andy