Skip to contentSkip to conversation

Add support for Karo TX51 module

PATCH Superseded Christian Kapeler 2 participants 2 messages Mar 18, 2012

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add support for Karo TX51 module

Hi,

the attached patches introduce basic barebox support for the Karo SO-DIMM TX51 SOC modules. Note, that the code is not tested with the Starterkit development board as base, but on our own custom board.

Currently the board boots, supports nand, and mmc. Ethernet support is currently only working, when barebox is chainloaded from Redboot shipped with the modules.

Kind regards,
Christian Kapeller

From 1d425e7d90bbd7ed7bdeb0daa44a19dd8a9840c1 Mon Sep 17 00:00:00 2001
From: Christian Kapeller <[email protected]>
Date: Sun, 18 Mar 2012 11:12:43 +0100
Subject: [PATCH 1/2] Update mx51 pad definitions

---
 arch/arm/mach-imx/include/mach/iomux-mx51.h |   44 +++++++++++++++++++++++---
 1 files changed, 39 insertions(+), 5 deletions(-)
arch/arm/mach-imx/include/mach/iomux-mx51.h +39 -5
index 908d1b2..42e26ca 100644
@@ -86,29 +86,37 @@
 
 #define MX51_PAD_EIM_EB2__EIM_EB2			IOMUX_PAD(0x468, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_EB2__FEC_MDIO			IOMUX_PAD(0x468, 0x0d4, 3, 0x954,   0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPIO2_22			IOMUX_PAD(0x468, 0x0d4, 1, 0x954,   0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_EB3__EIM_EB3			IOMUX_PAD(0x46C, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_EB3__FEC_RDATA1			IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c,   0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPIO2_23			IOMUX_PAD(0x46c, 0x0d8, 1, 0x95c,   0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_OE__EIM_OE				IOMUX_PAD(0x470, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__GPIO2_24			IOMUX_PAD(0x470, 0xDC, 1, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS0__EIM_CS0			IOMUX_PAD(0x474, 0xE0, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS1__EIM_CS1			IOMUX_PAD(0x478, 0xE4, 0, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_CS2__EIM_CS2			IOMUX_PAD(0x47C, 0xE8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS2__FEC_RDATA2			IOMUX_PAD(0x47c, 0x0e8, 3, 0x960,   0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO2_27			IOMUX_PAD(0x47c, 0x0e8, 1, 0x960,   0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_CS3__EIM_CS3			IOMUX_PAD(0x480, 0xEC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS3__FEC_RDATA3			IOMUX_PAD(0x480, 0x0ec, 3, 0x964,   0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__GPIO2_28			IOMUX_PAD(0x480, 0x0ec, 1, 0x964,   0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_CS4__EIM_CS4			IOMUX_PAD(0x484, 0xF0, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS4__FEC_RX_ER			IOMUX_PAD(0x484, 0x0f0, 3, 0x970,   0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__GPIO2_29			IOMUX_PAD(0x484, 0x0f0, 1, 0x970,   0, NO_PAD_CTRL)
 
 #define MX51_PAD_EIM_CS5__EIM_CS5			IOMUX_PAD(0x488, 0xF4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__GPIO2_30			IOMUX_PAD(0x488, 0xF4, 1, 0x950, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CS5__FEC_CRS			IOMUX_PAD(0x52C, 0xF4, 3, 0x950, 0, MX51_FEC_PAD_CTRL)
 
 #define MX51_PAD_EIM_DTACK__EIM_DTACK			IOMUX_PAD(0x48C, 0xF8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DTACK__GPIO2_31			IOMUX_PAD(0x48c, 0xf8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__EIM_LBA			IOMUX_PAD(0x494, 0xFC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__EIM_LBA			IOMUX_PAD(0x494, 0xFC, 0, 0x978, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO3_1			IOMUX_PAD(0x494, 0xFC, 1, 0x0978, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_CRE__EIM_CRE			IOMUX_PAD(0x4A0, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DRAM_CS1__DRAM_CS1			IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_WE_B__NANDF_WE_B			IOMUX_PAD(0x4E4, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
@@ -121,9 +129,11 @@
 
 #define MX51_PAD_NANDF_RB2__NANDF_RB2			IOMUX_PAD(0x500, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__FEC_COL			IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPIO3_10			IOMUX_PAD(0x500, 0x124, 3, 0x94c, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_RB3__NANDF_RB3			IOMUX_PAD(0x504, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__FEC_RX_CLK			IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__GPIO3_11			IOMUX_PAD(0x504, 0x128, 3, 0x968, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_RB4__NANDF_RB4			IOMUX_PAD(0x514, 0x12C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB5__NANDF_RB5			IOMUX_PAD(0x5D8, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
@@ -135,24 +145,33 @@
 #define MX51_PAD_NANDF_CS0__NANDF_CS0			IOMUX_PAD(0x518, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS1__NANDF_CS1			IOMUX_PAD(0x51C, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__NANDF_CS2			IOMUX_PAD(0x520, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
+//FIXME:
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER			IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__GPIO3_18			IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_CS3__NANDF_CS3			IOMUX_PAD(0x524, 0x13C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__FEC_MDC			IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0,MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__GPIO3_19			IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_CS4__NANDF_CS4			IOMUX_PAD(0x528, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS4__FEC_TDATA1			IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__GPIO3_20			IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_CS5__NANDF_CS5			IOMUX_PAD(0x52C, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS5__FEC_TDATA2			IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__GPIO3_21			IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_CS6__NANDF_CS6			IOMUX_PAD(0x530, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS6__FEC_TDATA3			IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__GPIO3_22			IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_CS7__NANDF_CS7			IOMUX_PAD(0x534, 0x14C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS7__FEC_TX_EN			IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__GPIO3_23			IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		IOMUX_PAD(0x538, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		IOMUX_PAD(0x538, 0x150, 3, 0x974, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_D15__NANDF_D15			IOMUX_PAD(0x53C, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D14__NANDF_D14			IOMUX_PAD(0x540, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
@@ -161,13 +180,17 @@
 
 #define MX51_PAD_NANDF_D11__NANDF_D11			IOMUX_PAD(0x54C, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D11__FEC_RX_DV			IOMUX_PAD(0x54C, 0x164, 2, 0x96c, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO3_29			IOMUX_PAD(0x54C, 0x164, 3, 0x96c, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_D10__NANDF_D10			IOMUX_PAD(0x550, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
 
-#define MX51_PAD_NANDF_D9__NANDF_D9			IOMUX_PAD(0x554, 0x16C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__NANDF_D9			IOMUX_PAD(0x554, 0x16C, 0, 0x958, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__FEC_RDATA0			IOMUX_PAD(0x554, 0x16C, 2, 0x958, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__GPIO3_31			IOMUX_PAD(0x554, 0x16C, 3, 0x958, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_D8__NANDF_D8			IOMUX_PAD(0x558, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D8__FEC_TDATA0			IOMUX_PAD(0x558, 0x170, 2, 0x0, 0, MX51_FEC_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__GPIO4_0			IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
 
 #define MX51_PAD_NANDF_D7__NANDF_D7			IOMUX_PAD(0x55C, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_D6__NANDF_D6			IOMUX_PAD(0x560, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
@@ -179,6 +202,7 @@
 #define MX51_PAD_NANDF_D0__NANDF_D0			IOMUX_PAD(0x578, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI1_D8__CSI1_D8			IOMUX_PAD(0x57C, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI1_D9__CSI1_D9			IOMUX_PAD(0x580, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO3_13			IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI1_D10__CSI1_D10			IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI1_D11__CSI1_D11			IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI1_D12__CSI1_D12			IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
@@ -196,6 +220,7 @@
 #define MX51_PAD_CSI1_PKE0__CSI1_PKE0			IOMUX_PAD(0x860, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI2_D12__CSI2_D12			IOMUX_PAD(0x5BC, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI2_D13__CSI2_D13			IOMUX_PAD(0x5C0, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO4_10			IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI2_D14__CSI2_D14			IOMUX_PAD(0x5C4, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI2_D15__CSI2_D15			IOMUX_PAD(0x5C8, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSI2_D16__CSI2_D16			IOMUX_PAD(0x5CC, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
@@ -209,13 +234,18 @@
 #define MX51_PAD_I2C1_CLK__I2C1_CLK			IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_I2C1_DAT__I2C1_DAT			IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD		IOMUX_PAD(0x5F0, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD		IOMUX_PAD(0x5F4, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			IOMUX_PAD(0x5f4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK			IOMUX_PAD(0x5F8, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20			IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS			IOMUX_PAD(0x5FC, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_MOSI__CSPI1_MOSI			IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_MISO__CSPI1_MISO			IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_SS0__CSPI1_SS0			IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO4_24			IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_SS1__CSPI1_SS1			IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO4_25			IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_RDY__CSPI1_RDY			IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_CSPI1_SCLK__CSPI1_SCLK			IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_UART1_RXD__UART1_RXD			IOMUX_PAD(0x618, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
@@ -252,13 +282,17 @@
 #define MX51_PAD_DI1_PIN11__DI1_PIN11			IOMUX_PAD(0x6A8, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI1_PIN12__DI1_PIN12			IOMUX_PAD(0x6AC, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI1_PIN13__DI1_PIN13			IOMUX_PAD(0x6B0, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			IOMUX_PAD(0x6B4, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			IOMUX_PAD(0x6B4, 0x2B4, 0, 0x980, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO3_3			IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
 #define MX51_PAD_DI1_D1_CS__DI1_D1_CS			IOMUX_PAD(0x6B8, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DI1_D1_CS__GPIO3_4			IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0984, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		IOMUX_PAD(0x6BC, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		IOMUX_PAD(0x6C0, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		IOMUX_PAD(0x6C0, 0x2C0, 0, 0x098C, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6			IOMUX_PAD(0x6c0, 0x2C0, 4, 0x098C, 1, NO_PAD_CTRL)
+
 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		IOMUX_PAD(0x6C4, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		IOMUX_PAD(0x6C8, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		IOMUX_PAD(0x6C8, 0x2C8, 0, 0x994, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT0__DISP1_DAT0			IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT1__DISP1_DAT1			IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP1_DAT2__DISP1_DAT2			IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
Signature · 1 line
1.7.9.1

From bc5ed9f59649469b3dc0da83816db0e6e54af557 Mon Sep 17 00:00:00 2001
From: Christian Kapeller <[email protected]>
Date: Sun, 18 Mar 2012 11:38:24 +0100
Subject: [PATCH 2/2] Add basic board support for Karo TX51 module.

Support for nand, and mmc is available, ethernet support currently limited.

---
 arch/arm/Makefile                        |    1 +
 arch/arm/boards/karo-tx51/Makefile       |    2 +
 arch/arm/boards/karo-tx51/config.h       |   21 ++
 arch/arm/boards/karo-tx51/env/config     |   45 ++++
 arch/arm/boards/karo-tx51/flash_header.c |   58 +++++
 arch/arm/boards/karo-tx51/tx51.c         |  343 ++++++++++++++++++++++++++++++
 arch/arm/boards/karo-tx51/tx51.dox       |   50 +++++
 arch/arm/configs/tx51stk5_defconfig      |   66 ++++++
 arch/arm/mach-imx/Kconfig                |    8 +
 9 files changed, 594 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boards/karo-tx51/Makefile
 create mode 100644 arch/arm/boards/karo-tx51/config.h
 create mode 100644 arch/arm/boards/karo-tx51/env/config
 create mode 100644 arch/arm/boards/karo-tx51/flash_header.c
 create mode 100644 arch/arm/boards/karo-tx51/tx51.c
 create mode 100644 arch/arm/boards/karo-tx51/tx51.dox
 create mode 100644 arch/arm/configs/tx51stk5_defconfig
arch/arm/Makefile +1 -0
index 4c6a566..532b014 100644
@@ -127,6 +127,7 @@ board-$(CONFIG_MACH_USB_A9263)			:= usb-a926x
 board-$(CONFIG_MACH_USB_A9G20)			:= usb-a926x
 board-$(CONFIG_MACH_VERSATILEPB)		:= versatile
 board-$(CONFIG_MACH_TX25)			:= karo-tx25
+board-$(CONFIG_MACH_TX51)			:= karo-tx51
 board-$(CONFIG_MACH_TQMA53)			:= tqma53
 
 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
arch/arm/boards/karo-tx51/Makefile new file +2 -0
new file mode 100644
index 0000000..e8f710e
@@ -0,0 +1,2 @@
+obj-y += tx51.o
+obj-y += flash_header.o
arch/arm/boards/karo-tx51/config.h new file +21 -0
new file mode 100644
index 0000000..b908fc0
@@ -0,0 +1,21 @@
+/**
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif	/* __CONFIG_H */
arch/arm/boards/karo-tx51/env/config new file +45 -0

45 lines not on this page · raw message

arch/arm/boards/karo-tx51/flash_header.c new file +58 -0

58 lines not on this page · raw message

arch/arm/boards/karo-tx51/tx51.c new file +343 -0

343 lines not on this page · raw message

arch/arm/boards/karo-tx51/tx51.dox new file +50 -0

50 lines not on this page · raw message

arch/arm/configs/tx51stk5_defconfig new file +66 -0

66 lines not on this page · raw message

arch/arm/mach-imx/Kconfig +8 -0
index 853757b..7285f75 100644
@@ -23,6 +23,7 @@ config ARCH_TEXT_BASE
 	default 0x7ff00000 if MACH_MX53_SMD
 	default 0x87f00000 if MACH_GUF_CUPID
 	default 0x93d00000 if MACH_TX25
+	default 0x97f00000 if MACH_TX51
 	default 0x7ff00000 if MACH_TQMA53
 
 config BOARDINFO
@@ -45,6 +46,7 @@ config BOARDINFO
 	default "Freescale i.MX53 SMD" if MACH_FREESCALE_MX53_SMD
 	default "Garz+Fricke Cupid" if MACH_GUF_CUPID
 	default "Ka-Ro tx25" if MACH_TX25
+	default "Ka-Ro tx51" if MACH_TX51
 	default "TQ tqma53" if MACH_TQMA53
 
 choice
@@ -381,6 +383,12 @@ config MACH_EUKREA_CPUIMX51SD
 	  Say Y here if you are using Eukrea's CPUIMX51 equipped
 	  with a Freescale i.MX51 Processor
 
+config MACH_TX51
+	bool "Ka-Ro TX51"
+	help
+	  Say Y here if you are using the Ka-Ro tx51 board
+
+
 endchoice
 
 endif
Signature · 1 line
1.7.9.1

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

maintainer
#1 lore raw
Quoted 11 lines · Christian Kapeler

Hi,

the attached patches introduce basic barebox support for the Karo SO-DIMM TX51 SOC modules.
Note, that the code is not tested with the Starterkit development board as base,
but on our own custom board.

Currently the board boots, supports nand, and mmc. Ethernet support is currently only working,
when barebox is chainloaded from Redboot shipped with the modules.

Looks mostly good, except for the FEC debugging of course. One thing about it is that rather than hand patching the iomux files we should just update them from the kernel. I have a patch in my queue which updates basic iomux-v3 support so that just like in the kernel the iomux pad is not a struct anymore but a 64bit type. This should make the way free to use the kernel iomux files. Given that your patch is not yet ready I still have some time to bring this into shape.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox