Where are my patches going?
A number of times when I've sent patches to the list via 'git send-email', they seem to never arrive. How can I figure out where they are going?
For example, a short time ago I sent a pair of patches - here's the log as printed by 'git send-email'
============================================================================================================================
$ git send-email --to [email protected] [email protected] --subject-prefix=meta-oe origin/master /tmp/ENcQFw9ulr/0001-python-twisted-update-to-latest-upstream-version.patch /tmp/ENcQFw9ulr/0002-python-zopeinterface-update-to-latest-upstream-versi.patch Who should the emails appear to be from? [Gary Thomas <[email protected]>] Emails will be sent from: Gary Thomas <[email protected]> Message-ID to be used as In-Reply-To for the first email? (mbox) Adding cc: Gary Thomas <[email protected]> from line 'From: Gary Thomas <[email protected]>' (body) Adding cc: Gary Thomas <[email protected]> from line 'Signed-off-by: Gary Thomas <[email protected]>'
From: Gary Thomas <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: [meta-oe 1/2] python-twisted: update to latest upstream version
Date: Thu, 29 Mar 2012 04:57:29 -0600
Message-Id: <[email protected]>
X-Mailer: git-send-email 1.7.7.6
The Cc list above has been expanded by additional addresses found in the patch commit message. By default send-email prompts before sending whenever this occurs. This behavior is controlled by the sendemail.confirm configuration setting.
For additional information, run 'git send-email --help'. To retain the current behavior, but squelch this message, run 'git config --global sendemail.confirm auto'.
Send this email? ([y]es|[n]o|[q]uit|[a]ll): a
OK. Log says:
Sendmail: /usr/sbin/sendmail -i [email protected] [email protected]
From: Gary Thomas <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: [meta-oe 1/2] python-twisted: update to latest upstream version
Date: Thu, 29 Mar 2012 04:57:29 -0600
Message-Id: <[email protected]>
X-Mailer: git-send-email 1.7.7.6
Result: OK
In git 1.7.0, the default has changed to --no-chain-reply-to
Set sendemail.chainreplyto configuration variable to true if
you want to keep --chain-reply-to as your default.
(mbox) Adding cc: Gary Thomas <[email protected]> from line 'From: Gary Thomas <[email protected]>' (body) Adding cc: Gary Thomas <[email protected]> from line 'Signed-off-by: Gary Thomas <[email protected]>' OK. Log says:
Sendmail: /usr/sbin/sendmail -i [email protected] [email protected]
From: Gary Thomas <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: [meta-oe 2/2] python-zopeinterface: update to latest upstream version
Date: Thu, 29 Mar 2012 04:57:30 -0600
Message-Id: <[email protected]>
X-Mailer: git-send-email 1.7.7.6
In-Reply-To: <[email protected]>
References: <[email protected]>
Result: OK
============================================================================================================================
Any ideas where these messages went or how I make sure my posts are making it to the list?
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Hi Gary,
Quoted 2 lines · Gary Thomas
A number of times when I've sent patches to the list via 'git send-email', they seem to never arrive. How can I figure out where they are going?
your patches arrived. You can find submitted patches in OE's patchwork installation [1] or in the mailing list archive [2] some minutes after they have been sent.
Regards,
Andreas
[1] http://patches.openembedded.org/patch/24811/
http://patches.openembedded.org/patch/24813/
[2] http://thread.gmane.org/gmane.comp.handhelds.openembedded
Quoted 9 lines · Andreas Oberritter
Hi Gary,
Quoted 2 lines · Gary Thomas
A number of times when I've sent patches to the list via 'git send-email', they seem to never arrive. How can I figure out where they are going?
your patches arrived. You can find submitted patches in OE's patchwork installation [1] or in the mailing list archive [2] some minutes after they have been sent.
That's good to hear, but why am I not seeing them on the list?
Also, I did send these same patches last week (I still had the same command line in the same window as I used today!) and they did not make it to patchwork at all. These were sent 2012-03-23 15:30 GMT +/-
Quoted 8 lines
Regards,
Andreas[1] http://patches.openembedded.org/patch/24811/
http://patches.openembedded.org/patch/24813/[2] http://thread.gmane.org/gmane.comp.handhelds.openembedded
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 11 lines · Gary Thomas
Quoted 10 lines · Andreas Oberritter
Hi Gary,
Quoted 4 lines · Gary Thomas
A number of times when I've sent patches to the list via 'git send-email',
they seem to never arrive. How can I figure out where they are going?
Quoted 6 lines
Quoted 3 lines
your patches arrived. You can find submitted patches in OE's patchwork installation [1] or in the mailing list archive [2] some minutes after they have been sent.
That's good to hear, but why am I not seeing them on the list?
maybe because the mailing list server knows they were sent by you and/or you are on cc so it doesn't send them again?
Enrico
Hello.
Quoted 11 lines · Gary Thomas
Quoted 8 lines · Andreas Oberritter
Quoted 2 lines · Gary Thomas
A number of times when I've sent patches to the list via 'git send-email', they seem to never arrive. How can I figure out where they are going?
your patches arrived. You can find submitted patches in OE's patchwork installation [1] or in the mailing list archive [2] some minutes after they have been sent.
That's good to hear, but why am I not seeing them on the list?
If you have been on the CC list, IIRC default option in git send-email, it is likely that mailman has just dropped you from the receiver list for these mails as you already got it in CC thus avoiding duplicates. Something that can be configured in mailman if desired.
regards
Stefan Schmidt
Quoted 13 lines · Stefan Schmidt
Hello.
Quoted 10 lines · Gary Thomas
Quoted 8 lines · Andreas Oberritter
Quoted 2 lines · Gary Thomas
A number of times when I've sent patches to the list via 'git send-email', they seem to never arrive. How can I figure out where they are going?
your patches arrived. You can find submitted patches in OE's patchwork installation [1] or in the mailing list archive [2] some minutes after they have been sent.
Quoted 7 lines
Quoted 1 line
That's good to hear, but why am I not seeing them on the list?
If you have been on the CC list, IIRC default option in git send-email, it is likely that mailman has just dropped you from the receiver list for these mails as you already got it in CC thus avoiding duplicates. Something that can be configured in mailman if desired.
I don't see any way to adjust this on this list - there doesn't seem to be a "my account settings" link on the info page.
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 3 lines · Gary Thomas
I don't see any way to adjust this on this list - there doesn't seem to be a "my account settings" link on the info page.
you can add --suppress-cc=self to you git send-email command
Eric
Signature · 1 line
http://eukrea.com/en/news/104-2012
Hello.
Quoted 4 lines · Eric Bénard
Quoted 2 lines · Gary Thomas
I don't see any way to adjust this on this list - there doesn't seem to be a "my account settings" link on the info page.
Its an global admin option not user specific IIRC. Sorry for not being clear about it.
Quoted 1 line
you can add --suppress-cc=self to you git send-email command
That would work if he does not want them in his normal inbox but appearing only on the list.
regards
Stefan Schmidt