Pull request: u-boot-arm/master

Hi Wolfgang,

The following changes since commit 7cb30b13f12077c7eec8ce2419cd96cd65ace8e2:

Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
(2012-03-23 21:59:16 +0100)

are available in the git repository at:

git://git.denx.de/u-boot-arm master

Anatolij Gustschin (4):
nhk8815: fix build errors
board/vpac270/onenand.c: Fix build errors board/ti/beagle/beagle.c: Fix build warnings arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings

Andreas Bie?mann (1):
atmel-boards: add missing atmel_mci.h

Chander Kashyap (1):
EXYNOS: Add structure for Exynos4 DMC

Christian Riesch (1):
calimain, enbw_cmc: Fix typo in comments

David M?ller (ELSOFT AG) (1):
ARM: fix s3c2410 timer code

Dirk Behme (2):
mx6q: mx6qsabrelite: Update the README
imximage: Remove overwriting of flash_offset

Doug Anderson (1):
EXYNOS: SMDK5250: Support all 4 UARTs

Eric Nelson (6):
i.MX6: mx6qsabrelite: add ext2 support
mx6q: mx6qsabrelite: setup_spi() should be called in board_init
to allow use for environment
i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
net: force PKTALIGN to ARCH_DMA_MINALIGN
net: fec_mxc: allow use with cache enabled

Fabio Estevam (15):
mx51evk: Fix CONFIG_SYS_MEMTEST_END
mx53evk: Fix CONFIG_SYS_MEMTEST_END
mx53smd: Fix CONFIG_SYS_MEMTEST_END
efikamx: Fix CONFIG_SYS_MEMTEST_END
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
mx6: Fix reset cause for Power On Reset case
mx6: Remove duplicate definition of ANATOP_BASE_ADDR
pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
mxs_spi: Return proper timeout error
mx6: Read silicon revision from register
USB: ehci-mx6: Add proper IO accessors
mx28evk: Provide default values for SPI bus and chip select
configs: imx: Use CONFIG_SF_DEFAULT_CS
mx53: Make PLL2 to be the parent of UART clock
mx53ard: Initialize return code with error

Grazvydas Ignotas (1):
twl4030: fix potential power supply handling issues

Heiko Schocher (1):
ARM: davinci: fixes for cam_enc_4xx board

Helmut Raiger (1):
mx31: add "ARM11P power gating" to get_reset_cause

Jason Hobbs (1):
ARM: highbank: change env config to use nvram

Marek Vasut (23):
PXA: Remove PXA PCMCIA support
PXA: Fix warning in zipitz2
PXA: Fix missing get_tbclk() breaking vpac boards
M28: Fix LCD PINMUX
M28: Support for the old M28 SoM v1.0 i.MX28: Reformat the DRAM memory configuration data
Examples: Properly append LDFLAGS to LD command
IXP: Make IXP buildable with arm-linux- toolchains
IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
IXP: Squash warnings in IXP NPE
IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
IXP: Fix NAND build warning on PDNB3 and SCPU
IXP: Fix GPIO_INT_ACT_LOW_SET()
i.MX28: Enable additional DRAM address bits i.MX28: Make the stabilization delays shorter i.MX28: Drop __naked function from spl_mem_init
ARM926EJS: Implement cache operations i.MX28: Add cache support into the APBH DMA driver i.MX28: Add cache support to MXS NAND driver
MMC: Implement generic bounce buffer i.MX28: Do data transfers via DMA in MMC driver i.MX28: Make use of the bounce buffer i.MX28: Enable caches by default

Matt Porter (2):
SPL: Add YMODEM over UART load support
SPL: Enable YMODEM support on BeagleBone and AM335x EVM

Rob Herring (8):
net: calxedaxgmac: fix build due to missing __aligned definition
ARM: highbank: fix warning for calxedaxgmac_initialize
ARM: highbank: add missing get_tbclk
ARM: highbank: fix us_to_tick calculation
ARM: highbank: change TEXT_BASE to 0x8000
ARM: highbank: Add boot counter support
ARM: highbank: add reset support
ARM: highbank: setup env from boot source register

Robert Delien (5):
i.mx28: Added register definitions for DIGCTL registers i.mx28: Replaced magic numbers for scratch register addresses
with register definitions
Renamed mx28_register to mx28_register_32 to prepare for
mx28_register_8
Introducing 8-bit wide register, mx28_register_8 Fix erroneous 32-bit access to hw_clkctrl_frac0 and
hw_clkctrl_frac1 registers

Simon Glass (39):
arm: Remove jornada link script
fdt: Add fdtdec_find_aliases() to deal with alias nodes
fdt: Add tests for fdtdec
fdt: Tidy up a few fdtdec problems
fdt: Add functions to access phandles, arrays and bools
fdt: Add basic support for decoding GPIO definitions
arm: fdt: Add skeleton device tree file from kernel
tegra: fdt: Add Tegra2x device tree file from kernel
tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
fdt: Add staging area for device tree binding documentation
fdt: Add tegra-usb bindings file from linux
tegra: fdt: Add additional USB binding
tegra: fdt: Add clock bindings
tegra: fdt: Add clock bindings for Tegra2 Seaboard
tegra: usb: fdt: Add additional device tree definitions for USB ports
tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
usb: Add support for txfifo threshold
tegra: fdt: Add function to return peripheral/clock ID
tegra: usb: Add support for Tegra USB peripheral
fdt: Avoid early panic() when there is no FDT present
arm: Check for valid FDT after console is up
tegra: usb: Add USB support to nvidia boards
tegra: usb: Add common USB defines for tegra2 boards
tegra: usb: Enable USB on Seaboard
tegra: fdt: Enable FDT support for Seaboard
tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
fdt: Add function to allow aliases to refer to multiple nodes
tegra: Enhance clock support to handle 16-bit clock divisors
tegra: i2c: Initialise I2C on Nvidia boards
tegra: i2c: Select number of controllers for Tegra2 boards
tegra: i2c: Enable I2C on Seaboard
tegra: i2c: Select I2C ordering for Seaboard
tegra: fdt: i2c: Add extra I2C bindings for U-Boot
Allow arch directory to contain .lds without requiring Makefile
arm: Remove zipitz2 link script
Define CPUDIR for the .lds link script
arm: Remove unneeded setting of LDCSRIPT
arm: add a common .lds link script
arm: Use common .lds file where possible

Simon Schwarz (8):
Add cmd_spl command
devkit8000: add config for spl command
omap-common: Add NAND SPL linux booting devkit8000/spl: init GPMC for dm9000 in SPL omap-common/spl: Add linux boot to SPL omap/spl: change output of spl_parse_image_header
devkit8000: Implement and activate direct OS boot
arm: Add Prep subcommand support to bootm

Stefano Babic (8):
Add cache functions to SPL for armv7
OMAP3: SPL: do not call I2C init if no I2C is set.
SPL: call cleanup_before_linux() before booting Linux
OMAP3: twister: add support to boot Linux from SPL
NAND: TI: fix warnings in omap_gpmc.c
OMAP3: mt_ventoux: updated timing for FPGA
OMAP3: mt_ventoux: sets its own mtdparts
Davinci: ea20: use gpio framework to access gpios

Tom Rini (9):
.gitignore: Add .su files
config.mk: Make cc-option create a file under include/generated config.mk: Check for -fstack-usage support
spl.c: Use __noreturn decorator
README: document more SPL config options
SPL: Add README.omap3
cam_enc_4xx: Rename 'images' to 'imgs'
sdrc.c: Fix typo in do_sdrc_init() for SPL
OMAP: Remove omap1610inn-based boards

Tom Warren (2):
arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer
load
tegra: fdt: Enable FDT support for Ventana

Vasily Khoruzhick (2):
zipitz2: fix boot issue introduced by PXA low level init rework
zipitz2: use pxa_mmc_gen as MMC driver

Wolfgang Grandegger (2):
usb/ehci: Add USB support for the MX6Q
mx6qsabrelite: add and enable USB Host 1 support

Yen Lin (1):
tegra: i2c: Add I2C driver

jacopo mondi (1):
omap3_spi: receive transmit mode

  .gitignore                                         |    1 +
  MAINTAINERS                                        |    1 -
  Makefile                                           |   25 +-
  README                                             |   72 +++-
  arch/arm/config.mk                                 |    7 -
  arch/arm/cpu/arm1136/mx31/generic.c                |    2 +
  arch/arm/cpu/arm1136/u-boot.lds                    |   89 ---
  arch/arm/cpu/arm1176/u-boot.lds                    |   78 ---
  arch/arm/cpu/arm720t/u-boot.lds                    |   79 ---
  arch/arm/cpu/arm920t/s3c24x0/timer.c               |   64 +--
  arch/arm/cpu/arm920t/u-boot.lds                    |   88 ---
  arch/arm/cpu/arm925t/u-boot.lds                    |   83 ---
  arch/arm/cpu/arm926ejs/cache.c                     |   66 ++-
  arch/arm/cpu/arm926ejs/mx28/clock.c                |   74 +--
  arch/arm/cpu/arm926ejs/mx28/iomux.c                |    6 +-
  arch/arm/cpu/arm926ejs/mx28/mx28.c                 |   24 +-
  arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c         |  130 +++---
  arch/arm/cpu/arm926ejs/mx28/spl_power_init.c       |    8 +-
  arch/arm/cpu/arm926ejs/nomadik/timer.c             |   10 +
  arch/arm/cpu/arm926ejs/u-boot.lds                  |   80 ---
  arch/arm/cpu/arm946es/u-boot.lds                   |   80 ---
  arch/arm/cpu/arm_intcm/u-boot.lds                  |   80 ---
  arch/arm/cpu/armv7/Makefile                        |    2 -
  arch/arm/cpu/armv7/cpu.c                           |    2 +
  arch/arm/cpu/armv7/highbank/Makefile               |    2 +-
  arch/arm/cpu/armv7/highbank/bootcount.c            |   36 ++
  arch/arm/cpu/armv7/highbank/config.mk              |    1 +
  arch/arm/cpu/armv7/highbank/timer.c                |    9 +-
  arch/arm/cpu/armv7/imx-common/cpu.c                |   25 +-
  arch/arm/cpu/armv7/mx5/lowlevel_init.S             |   20 +-
  arch/arm/cpu/armv7/mx6/clock.c                     |   13 +
  arch/arm/cpu/armv7/mx6/soc.c                       |    8 +-
  arch/arm/cpu/armv7/omap-common/Makefile            |    3 +
  arch/arm/cpu/armv7/omap-common/clocks-common.c     |    4 +-
  arch/arm/cpu/armv7/omap-common/spl.c               |   56 ++-
  arch/arm/cpu/armv7/omap-common/spl_nand.c          |   47 ++-
  arch/arm/cpu/armv7/omap-common/spl_ymodem.c        |   76 +++
  arch/arm/cpu/armv7/omap3/board.c                   |    2 +
  arch/arm/cpu/armv7/omap3/sdrc.c                    |    2 +-
  arch/arm/cpu/armv7/tegra2/Makefile                 |    4 +-
  arch/arm/cpu/armv7/tegra2/ap20.c                   |   20 +-
  arch/arm/cpu/armv7/tegra2/board.c                  |    2 +-
  arch/arm/cpu/armv7/tegra2/clock.c                  |  121 ++++-
  arch/arm/cpu/armv7/tegra2/config.mk                |    2 +
  arch/arm/cpu/armv7/tegra2/usb.c                    |  460 ++++++++++++++++
  arch/arm/cpu/ixp/config.mk                         |    3 +
  arch/arm/cpu/ixp/npe/IxEthAcc.c                    |    2 +-
  arch/arm/cpu/ixp/npe/IxEthDBAPISupport.c           |    3 -
  arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c            |    3 -
  arch/arm/cpu/lh7a40x/u-boot.lds                    |   80 ---
  arch/arm/cpu/pxa/timer.c                           |    5 +
  arch/arm/cpu/pxa/u-boot.lds                        |   86 ---
  arch/arm/cpu/s3c44b0/u-boot.lds                    |   80 ---
  arch/arm/cpu/sa1100/u-boot.lds                     |   83 ---
  arch/arm/cpu/{armv7 => }/u-boot.lds                |   15 +-
  arch/arm/dts/skeleton.dtsi                         |   13 +
  arch/arm/dts/tegra20.dtsi                          |  196 +++++++
  arch/arm/include/asm/arch-exynos/dmc.h             |  109 ++++
  arch/arm/include/asm/arch-ixp/ixp425.h             |   10 +-
  arch/arm/include/asm/arch-mx28/imx-regs.h          |    1 +
  arch/arm/include/asm/arch-mx28/regs-apbh.h         |  254 +++++-----
  arch/arm/include/asm/arch-mx28/regs-bch.h          |   42 +-
  arch/arm/include/asm/arch-mx28/regs-clkctrl.h      |   98 ++--
  arch/arm/include/asm/arch-mx28/regs-common.h       |   28 +-
  arch/arm/include/asm/arch-mx28/regs-digctl.h       |  155 ++++++
  arch/arm/include/asm/arch-mx28/regs-gpmi.h         |   26 +-
  arch/arm/include/asm/arch-mx28/regs-i2c.h          |   28 +-
  arch/arm/include/asm/arch-mx28/regs-ocotp.h        |   86 ++--
  arch/arm/include/asm/arch-mx28/regs-pinctrl.h      |  168 +++---
  arch/arm/include/asm/arch-mx28/regs-power.h        |   28 +-
  arch/arm/include/asm/arch-mx28/regs-rtc.h          |   28 +-
  arch/arm/include/asm/arch-mx28/regs-ssp.h          |   40 +-
  arch/arm/include/asm/arch-mx28/regs-timrot.h       |   38 +-
  arch/arm/include/asm/arch-mx28/regs-usbphy.h       |   20 +-
  arch/arm/include/asm/arch-mx28/sys_proto.h         |   10 +-
  arch/arm/include/asm/arch-mx6/clock.h              |    1 +
  arch/arm/include/asm/arch-mx6/imx-regs.h           |  146 +++++-
  arch/arm/include/asm/arch-tegra2/clk_rst.h         |   10 +-
  arch/arm/include/asm/arch-tegra2/clock.h           |   13 +
  arch/arm/include/asm/arch-tegra2/tegra2.h          |    6 +-
  arch/arm/include/asm/arch-tegra2/tegra_i2c.h       |  157 ++++++
  arch/arm/include/asm/arch-tegra2/usb.h             |  252 +++++++++
  arch/arm/include/asm/bootm.h                       |   26 +
  arch/arm/include/asm/omap_common.h                 |    5 +
  arch/arm/lib/Makefile                              |    5 +-
  arch/arm/lib/board.c                               |    8 +
  arch/arm/lib/bootm.c                               |  349 ++++++------
  board/actux1/actux1.c                              |    2 -
  board/actux2/actux2.c                              |    2 -
  board/actux3/actux3.c                              |    2 -
  board/actux4/actux4.c                              |    2 -
  board/ait/cam_enc_4xx/cam_enc_4xx.c                |  103 +++--
  board/ait/cam_enc_4xx/config.mk                    |    7 +
  board/ait/cam_enc_4xx/u-boot-spl.lds               |    2 +-
  board/davinci/ea20/ea20.c                          |   38 +-
  board/denx/m28evk/spl_boot.c                       |   16 +-
  board/dvlhost/dvlhost.c                            |    2 -
  board/egnite/ethernut5/ethernut5.c                 |    1 +
  board/emk/top9000/top9000.c                        |    1 +
  board/enbw/enbw_cmc/enbw_cmc.c                     |    2 +-
  board/freescale/mx53ard/mx53ard.c                  |    2 +-
  board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   31 +-
  board/highbank/highbank.c                          |   23 +
  board/nvidia/common/board.c                        |   19 +
  board/nvidia/common/board.h                        |    6 +
  board/nvidia/dts/tegra2-seaboard.dts               |   92 ++++
  board/nvidia/seaboard/seaboard.c                   |    6 +
  board/omicron/calimain/calimain.c                  |    2 +-
  board/prodrive/pdnb3/nand.c                        |   16 +-
  board/prodrive/pdnb3/pdnb3.c                       |    3 -
  board/samsung/smdk5250/smdk5250.c                  |   44 ++-
  board/technexion/twister/twister.c                 |   23 +
  board/teejet/mt_ventoux/mt_ventoux.h               |   11 +-
  board/ti/beagle/beagle.c                           |    3 +-
  board/ti/omap1610inn/Makefile                      |   45 --
  board/ti/omap1610inn/config.mk                     |   26 -
  board/ti/omap1610inn/flash.c                       |  495 
-----------------
  board/ti/omap1610inn/lowlevel_init.S               |  452 ----------------
  board/ti/omap1610inn/omap1610innovator.c           |  309 -----------
  board/timll/devkit8000/devkit8000.c                |   37 ++
  board/vpac270/onenand.c                            |    3 -
  board/zipitz2/zipitz2.c                            |    9 +
  boards.cfg                                         |   10 +-
  common/Makefile                                    |    4 +
  common/cmd_spl.c                                   |  188 +++++++
  config.mk                                          |   11 +-
  doc/README.PXA_CF                                  |   56 --
  doc/README.commands.spl                            |   31 ++
  doc/README.mx6qsabrelite                           |   12 +-
  doc/SPL/README.omap3                               |   74 +++
  doc/device-tree-bindings/README                    |   17 +
  .../clock/nvidia,tegra20-car.txt                   |  207 +++++++
  doc/device-tree-bindings/i2c/tegra20-i2c.txt       |   23 +
  doc/device-tree-bindings/usb/tegra-usb.txt         |   25 +
  drivers/dma/apbh_dma.c                             |   23 +-
  drivers/gpio/mxs_gpio.c                            |   16 +-
  drivers/i2c/Makefile                               |    1 +
  drivers/i2c/tegra_i2c.c                            |  569 
++++++++++++++++++++
  drivers/misc/pmic_i2c.c                            |    6 +
  drivers/mmc/mmc.c                                  |  102 ++++-
  drivers/mmc/mxsmmc.c                               |   70 ++-
  drivers/mtd/nand/mxs_nand.c                        |   53 ++-
  drivers/mtd/nand/omap_gpmc.c                       |   14 +-
  drivers/net/calxedaxgmac.c                         |    1 +
  drivers/net/fec_mxc.c                              |  277 +++++++---
  drivers/net/fec_mxc.h                              |   19 +-
  drivers/pcmcia/Makefile                            |    1 -
  drivers/pcmcia/pxa_pcmcia.c                        |   93 ----
  drivers/power/twl4030.c                            |   18 +-
  drivers/spi/mxs_spi.c                              |    6 +-
  drivers/spi/omap3_spi.c                            |   66 +++-
  drivers/spi/omap3_spi.h                            |    2 +
  drivers/usb/host/Makefile                          |    2 +
  drivers/usb/host/ehci-hcd.c                        |    7 +
  drivers/usb/host/ehci-mx6.c                        |  200 +++++++
  drivers/usb/host/ehci-mxs.c                        |    8 +-
  .../u-boot.lds => drivers/usb/host/ehci-tegra.c    |   62 ++-
  drivers/usb/host/ehci.h                            |    6 +-
  examples/standalone/Makefile                       |    2 +-
  board/zipitz2/u-boot.lds => include/cmd_spl.h      |   43 +--
  include/configs/actux1.h                           |    2 +
  include/configs/actux2.h                           |    2 +
  include/configs/actux3.h                           |    2 +
  include/configs/actux4.h                           |    2 +
  include/configs/am335x_evm.h                       |    1 +
  include/configs/cam_enc_4xx.h                      |   13 +-
  include/configs/devkit8000.h                       |   15 +-
  include/configs/dvlhost.h                          |    2 +
  include/configs/ea20.h                             |    2 +
  include/configs/efikamx.h                          |    4 +-
  include/configs/highbank.h                         |   21 +-
  include/configs/m28evk.h                           |    3 +-
  include/configs/mt_ventoux.h                       |   10 +
  include/configs/mx28evk.h                          |    3 +
  include/configs/mx31pdk.h                          |    2 +-
  include/configs/mx51evk.h                          |    2 +-
  include/configs/mx53evk.h                          |    2 +-
  include/configs/mx53smd.h                          |    2 +-
  include/configs/mx6qsabrelite.h                    |   17 +
  include/configs/omap1610h2.h                       |  197 -------
  include/configs/omap1610inn.h                      |  202 -------
  include/configs/pdnb3.h                            |    2 +
  include/configs/seaboard.h                         |   20 +
  include/configs/tegra2-common.h                    |   13 +
  include/configs/twister.h                          |   12 +
  include/configs/ventana.h                          |    5 +
  include/configs/vision2.h                          |    2 +-
  include/configs/zipitz2.h                          |   14 +-
  include/fdtdec.h                                   |  197 +++++++-
  include/image.h                                    |    2 +
  include/net.h                                      |    3 +-
  include/pcmcia.h                                   |    3 +-
  lib/Makefile                                       |    4 +
  lib/fdtdec.c                                       |  323 +++++++++++-
  lib/fdtdec_test.c                                  |  226 ++++++++
  spl/Makefile                                       |    4 +
  tools/imximage.c                                   |   18 +-
  tools/imximage.h                                   |    1 +
  198 files changed, 6109 insertions(+), 4188 deletions(-)

delete mode 100644 arch/arm/cpu/arm1136/u-boot.lds
delete mode 100644 arch/arm/cpu/arm1176/u-boot.lds
delete mode 100644 arch/arm/cpu/arm720t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm920t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm925t/u-boot.lds
delete mode 100644 arch/arm/cpu/arm926ejs/u-boot.lds
delete mode 100644 arch/arm/cpu/arm946es/u-boot.lds
delete mode 100644 arch/arm/cpu/arm_intcm/u-boot.lds
create mode 100644 arch/arm/cpu/armv7/highbank/bootcount.c create mode 100644 arch/arm/cpu/armv7/highbank/config.mk create mode 100644 arch/arm/cpu/armv7/omap-common/spl_ymodem.c create mode 100644 arch/arm/cpu/armv7/tegra2/usb.c
delete mode 100644 arch/arm/cpu/lh7a40x/u-boot.lds
delete mode 100644 arch/arm/cpu/pxa/u-boot.lds
delete mode 100644 arch/arm/cpu/s3c44b0/u-boot.lds
delete mode 100644 arch/arm/cpu/sa1100/u-boot.lds
rename arch/arm/cpu/{armv7 => }/u-boot.lds (88%)
create mode 100644 arch/arm/dts/skeleton.dtsi
create mode 100644 arch/arm/dts/tegra20.dtsi
create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h create mode 100644 arch/arm/include/asm/arch-tegra2/tegra_i2c.h create mode 100644 arch/arm/include/asm/arch-tegra2/usb.h create mode 100644 arch/arm/include/asm/bootm.h
create mode 100644 board/nvidia/dts/tegra2-seaboard.dts delete mode 100644 board/ti/omap1610inn/Makefile
delete mode 100644 board/ti/omap1610inn/config.mk
delete mode 100644 board/ti/omap1610inn/flash.c
delete mode 100644 board/ti/omap1610inn/lowlevel_init.S delete mode 100644 board/ti/omap1610inn/omap1610innovator.c create mode 100644 common/cmd_spl.c
delete mode 100644 doc/README.PXA_CF
create mode 100644 doc/README.commands.spl
create mode 100644 doc/SPL/README.omap3
create mode 100644 doc/device-tree-bindings/README
create mode 100644 doc/device-tree-bindings/clock/nvidia,tegra20-car.txt create mode 100644 doc/device-tree-bindings/i2c/tegra20-i2c.txt create mode 100644 doc/device-tree-bindings/usb/tegra-usb.txt create mode 100644 drivers/i2c/tegra_i2c.c
delete mode 100644 drivers/pcmcia/pxa_pcmcia.c
create mode 100644 drivers/usb/host/ehci-mx6.c
rename board/jornada/u-boot.lds => drivers/usb/host/ehci-tegra.c (53%) rename board/zipitz2/u-boot.lds => include/cmd_spl.h (56%) delete mode 100644 include/configs/omap1610h2.h
delete mode 100644 include/configs/omap1610inn.h
create mode 100644 lib/fdtdec_test.c

Amicalement,

Albert.

Dear Albert ARIBAUD,

Applied, thanks.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are bugs and then there are bugs.  And then there are bugs.
                                                    - Karl Lehenbauer