3.3.1-stable review

@@ -484,6 +484,9 @@ static void option_instat_callback(struc
 #define LG_VENDOR_ID				0x1004
 #define LG_PRODUCT_L02C				0x618f
 
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID			0x0e8d
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,

@@ -1198,6 +1201,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

@@ -307,6 +307,9 @@ static void option_instat_callback(struc
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 #define TELIT_PRODUCT_UC864G			0x1004
+#define TELIT_PRODUCT_CC864_DUAL		0x1005
+#define TELIT_PRODUCT_CC864_SINGLE		0x1006
+#define TELIT_PRODUCT_DE910_DUAL		0x1010
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2

@@ -771,6 +774,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },

@@ -1373,6 +1373,7 @@ static int option_probe(struct usb_seria
 		serial->interface->cur_altsetting->desc.bInterfaceNumber,
 		OPTION_BLACKLIST_RESERVED_IF,
 		(const struct option_blacklist_info *) id->driver_info))
+		return -ENODEV;
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&

@@ -901,6 +901,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },

@@ -73,10 +73,10 @@ static int
 task_notify_func(struct notifier_block *self, unsigned long val, void *data)
 {
 	struct task_struct *task = data;
-	if (task == lowmem_deathpending) {
+
+	if (task == lowmem_deathpending)
 		lowmem_deathpending = NULL;
-		task_handoff_unregister(&task_nb);
-	}
+
 	return NOTIFY_OK;
 }
 

@@ -174,14 +174,12 @@ static int lowmem_shrink(struct shrinker
 			     selected->pid, selected->comm,
 			     selected_oom_adj, selected_tasksize);
 		/*
-		 * If CONFIG_PROFILING is off, then task_handoff_register()
-		 * is a nop. In that case we don't want to stall the killer
-		 * by setting lowmem_deathpending.
+		 * If CONFIG_PROFILING is off, then we don't want to stall
+		 * the killer by setting lowmem_deathpending.
 		 */
 #ifdef CONFIG_PROFILING
 		lowmem_deathpending = selected;
 		lowmem_deathpending_timeout = jiffies + HZ;
-		task_handoff_register(&task_nb);
 #endif
 		force_sig(SIGKILL, selected);
 		rem -= selected_tasksize;

@@ -199,6 +197,7 @@ static struct shrinker lowmem_shrinker =
 
 static int __init lowmem_init(void)
 {
+	task_handoff_register(&task_nb);
 	register_shrinker(&lowmem_shrinker);
 	return 0;
 }

@@ -206,6 +205,7 @@ static int __init lowmem_init(void)
 static void __exit lowmem_exit(void)
 {
 	unregister_shrinker(&lowmem_shrinker);
+	task_handoff_unregister(&task_nb);
 }
 
 module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR);

@@ -299,10 +299,12 @@ static void zbud_free_and_delist(struct
 	struct zbud_page *zbpg =
 		container_of(zh, struct zbud_page, buddy[budnum]);
 
+	spin_lock(&zbud_budlists_spinlock);
 	spin_lock(&zbpg->lock);
 	if (list_empty(&zbpg->bud_list)) {
 		/* ignore zombie page... see zbud_evict_pages() */
 		spin_unlock(&zbpg->lock);
+		spin_unlock(&zbud_budlists_spinlock);
 		return;
 	}
 	size = zbud_free(zh);

@@ -310,7 +312,6 @@ static void zbud_free_and_delist(struct
 	zh_other = &zbpg->buddy[(budnum == 0) ? 1 : 0];
 	if (zh_other->size == 0) { /* was unbuddied: unlist and free */
 		chunks = zbud_size_to_chunks(size) ;
-		spin_lock(&zbud_budlists_spinlock);
 		BUG_ON(list_empty(&zbud_unbuddied[chunks].list));
 		list_del_init(&zbpg->bud_list);
 		zbud_unbuddied[chunks].count--;

@@ -318,7 +319,6 @@ static void zbud_free_and_delist(struct
 		zbud_free_raw_page(zbpg);
 	} else { /* was buddied: move remaining buddy to unbuddied list */
 		chunks = zbud_size_to_chunks(zh_other->size) ;
-		spin_lock(&zbud_budlists_spinlock);
 		list_del_init(&zbpg->bud_list);
 		zcache_zbud_buddied_count--;
 		list_add_tail(&zbpg->bud_list, &zbud_unbuddied[chunks].list);

@@ -164,9 +164,9 @@ int cvm_oct_phy_setup_device(struct net_
 
 	int phy_addr = cvmx_helper_board_get_mii_address(priv->port);
 	if (phy_addr != -1) {
-		char phy_id[20];
+		char phy_id[MII_BUS_ID_SIZE + 3];
 
-		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr);
+		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "mdio-octeon-0", phy_addr);
 
 		priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0,
 					PHY_INTERFACE_MODE_GMII);

@@ -1763,7 +1763,8 @@ static int ftdi_8u2232c_probe(struct usb
 
 	dbg("%s", __func__);
 
-	if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+	if ((udev->manufacturer) &&
+	    (strcmp(udev->manufacturer, "CALAO Systems") == 0))
 		return ftdi_jtag_probe(serial);
 
 	return 0;

@@ -1763,8 +1763,8 @@ static int ftdi_8u2232c_probe(struct usb
 
 	dbg("%s", __func__);
 
-	if ((udev->manufacturer) &&
-	    (strcmp(udev->manufacturer, "CALAO Systems") == 0))
+	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;

@@ -797,7 +797,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
+	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },

@@ -532,10 +532,14 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
- * Hornby Elite
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
  */
-#define HORNBY_VID		0x04D8
-#define HORNBY_ELITE_PID	0x000A
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
 
 /*
  * RATOC REX-USB60F

@@ -846,6 +846,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

@@ -97,6 +97,8 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */

@@ -188,6 +188,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },

@@ -870,7 +871,8 @@ static const char *ftdi_chip_name[] = {
 	[FT232RL] = "FT232RL",
 	[FT2232H] = "FT2232H",
 	[FT4232H] = "FT4232H",
-	[FT232H]  = "FT232H"
+	[FT232H]  = "FT232H",
+	[FTX]     = "FT-X"
 };
 
 

@@ -1171,7 +1173,8 @@ static __u32 get_ftdi_divisor(struct tty
 		break;
 	case FT232BM: /* FT232BM chip */
 	case FT2232C: /* FT2232C chip */
-	case FT232RL:
+	case FT232RL: /* FT232RL chip */
+	case FTX:     /* FT-X series */
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);

@@ -1460,10 +1463,14 @@ static void ftdi_determine_type(struct u
 	} else if (version < 0x900) {
 		/* Assume it's an FT232RL */
 		priv->chip_type = FT232RL;
-	} else {
+	} else if (version < 0x1000) {
 		/* Assume it's an FT232H */
 		priv->chip_type = FT232H;
+	} else {
+		/* Assume it's an FT-X series device */
+		priv->chip_type = FTX;
 	}
+
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 

@@ -1591,7 +1598,8 @@ static int create_sysfs_attrs(struct usb
 		     priv->chip_type == FT232RL ||
 		     priv->chip_type == FT2232H ||
 		     priv->chip_type == FT4232H ||
-		     priv->chip_type == FT232H)) {
+		     priv->chip_type == FT232H ||
+		     priv->chip_type == FTX)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}

@@ -1613,7 +1621,8 @@ static void remove_sysfs_attrs(struct us
 		    priv->chip_type == FT232RL ||
 		    priv->chip_type == FT2232H ||
 		    priv->chip_type == FT4232H ||
-                    priv->chip_type == FT232H) {
+		    priv->chip_type == FT232H ||
+		    priv->chip_type == FTX) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}

@@ -2291,6 +2300,7 @@ static int ftdi_tiocmget(struct tty_stru
 	case FT2232H:
 	case FT4232H:
 	case FT232H:
+	case FTX:
 		len = 2;
 		break;
 	default:

@@ -157,7 +157,8 @@ enum ftdi_chip_type {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7,
-	FT232H  = 8
+	FT232H  = 8,
+	FTX     = 9,
 };
 
 enum ftdi_sio_baudrate {

@@ -23,6 +23,7 @@
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
 #define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
 #define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 

@@ -849,6 +849,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

@@ -30,6 +30,8 @@
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+#define FTDI_LUMEL_PD12_PID	0x6002
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org

@@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct eh
 			       unsigned int port_offset)
 {
 	u32 portsc;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	void __iomem *non_ehci = hcd->regs;
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);

@@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct eh
 		portsc |= PORT_PTS_PTW;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		/* enable UTMI PHY */
+		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
 		portsc |= PORT_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_NONE:

@@ -45,5 +45,6 @@
 #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+#define CTRL_UTMI_PHY_EN	(1<<9)
 #define SNOOP_SIZE_2GB		0x1e
 #endif				/* _EHCI_FSL_H */

@@ -476,8 +476,6 @@ static int netdev_close(struct net_devic
 	r8712_free_assoc_resources(padapter);
 	/*s2-4.*/
 	r8712_free_network_queue(padapter);
-	/* The interface is no longer Up: */
-	padapter->bup = false;
 	release_firmware(padapter->fw);
 	/* never exit with a firmware callback pending */
 	wait_for_completion(&padapter->rtl8712_fw_ready);

@@ -2380,13 +2380,7 @@ static struct iw_statistics *r871x_get_w
 		tmp_qual = padapter->recvpriv.signal;
 		tmp_noise = padapter->recvpriv.noise;
 		piwstats->qual.level = tmp_level;
-		/*piwstats->qual.qual = tmp_qual;
-		 * The NetworkManager of Fedora 10, 13 will use the link
-		 * quality for its display.
-		 * So, use the fw_rssi on link quality variable because
-		 * fw_rssi will be updated per 2 seconds.
-		 */
-		piwstats->qual.qual = tmp_level;
+		piwstats->qual.qual = tmp_qual;
 		piwstats->qual.noise = tmp_noise;
 	}
 	piwstats->qual.updated = IW_QUAL_ALL_UPDATED;

@@ -86,7 +86,7 @@ again:
 		id = -ENOMEM;
 	}
 
-	return 0;
+	return id;
 }
 EXPORT_SYMBOL_GPL(dwc3_get_device_id);
 

@@ -667,6 +667,7 @@ static void dwc3_prepare_trbs(struct dwc
 {
 	struct dwc3_request	*req, *n;
 	u32			trbs_left;
+	u32			max;
 	unsigned int		last_one = 0;
 
 	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);

@@ -674,6 +675,13 @@ static void dwc3_prepare_trbs(struct dwc
 	/* the first request must not be queued */
 	trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 
+	/* Can't wrap around on a non-isoc EP since there's no link TRB */
+	if (!usb_endpoint_xfer_isoc(dep->desc)) {
+		max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
+		if (trbs_left > max)
+			trbs_left = max;
+	}
+
 	/*
 	 * if busy & slot are equal than it is either full or empty. If we are
 	 * starting to proceed requests then we are empty. Otherwise we ar

@@ -1498,7 +1498,7 @@ static void dwc3_endpoint_transfer_compl
 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
 		struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
 {
-	u32 uf;
+	u32 uf, mask;
 
 	if (list_empty(&dep->request_list)) {
 		dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",

@@ -1506,16 +1506,10 @@ static void dwc3_gadget_start_isoc(struc
 		return;
 	}
 
-	if (event->parameters) {
-		u32 mask;
-
-		mask = ~(dep->interval - 1);
-		uf = event->parameters & mask;
-		/* 4 micro frames in the future */
-		uf += dep->interval * 4;
-	} else {
-		uf = 0;
-	}
+	mask = ~(dep->interval - 1);
+	uf = event->parameters & mask;
+	/* 4 micro frames in the future */
+	uf += dep->interval * 4;
 
 	__dwc3_gadget_kick_transfer(dep, uf, 1);
 }

@@ -485,16 +485,16 @@ static int dwc3_gadget_ep_enable(struct
 
 	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
-		strncat(dep->name, "-control", sizeof(dep->name));
+		strlcat(dep->name, "-control", sizeof(dep->name));
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
-		strncat(dep->name, "-isoc", sizeof(dep->name));
+		strlcat(dep->name, "-isoc", sizeof(dep->name));
 		break;
 	case USB_ENDPOINT_XFER_BULK:
-		strncat(dep->name, "-bulk", sizeof(dep->name));
+		strlcat(dep->name, "-bulk", sizeof(dep->name));
 		break;
 	case USB_ENDPOINT_XFER_INT:
-		strncat(dep->name, "-int", sizeof(dep->name));
+		strlcat(dep->name, "-int", sizeof(dep->name));
 		break;
 	default:
 		dev_err(dwc->dev, "invalid endpoint transfer type\n");

@@ -243,7 +243,7 @@ struct pio2_card {
 int pio2_cntr_reset(struct pio2_card *);
 
 int pio2_gpio_reset(struct pio2_card *);
-int __init pio2_gpio_init(struct pio2_card *);
-void __exit pio2_gpio_exit(struct pio2_card *);
+int __devinit pio2_gpio_init(struct pio2_card *);
+void pio2_gpio_exit(struct pio2_card *);
 
 #endif /* _VME_PIO2_H_ */

@@ -187,7 +187,7 @@ int pio2_gpio_reset(struct pio2_card *ca
 	return 0;
 }
 
-int __init pio2_gpio_init(struct pio2_card *card)
+int __devinit pio2_gpio_init(struct pio2_card *card)
 {
 	int retval = 0;
 	char *label;

@@ -220,7 +220,7 @@ int __init pio2_gpio_init(struct pio2_ca
 	return retval;
 };
 
-void __exit pio2_gpio_exit(struct pio2_card *card)
+void pio2_gpio_exit(struct pio2_card *card)
 {
 	const char *label = card->gc.label;
 

@@ -574,6 +574,15 @@ void musb_g_tx(struct musb *musb, u8 epn
 
 		if (request->actual == request->length) {
 			musb_g_giveback(musb_ep, request, 0);
+			/*
+			 * In the giveback function the MUSB lock is
+			 * released and acquired after sometime. During
+			 * this time period the INDEX register could get
+			 * changed by the gadget_queue function especially
+			 * on SMP systems. Reselect the INDEX to be sure
+			 * we are reading/modifying the right registers
+			 */
+			musb_ep_select(mbase, epnum);
 			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!req) {
 				dev_dbg(musb->controller, "%s idle now\n",

@@ -983,6 +992,15 @@ void musb_g_rx(struct musb *musb, u8 epn
 		}
 #endif
 		musb_g_giveback(musb_ep, request, 0);
+		/*
+		 * In the giveback function the MUSB lock is
+		 * released and acquired after sometime. During
+		 * this time period the INDEX register could get
+		 * changed by the gadget_queue function especially
+		 * on SMP systems. Reselect the INDEX to be sure
+		 * we are reading/modifying the right registers
+		 */
+		musb_ep_select(mbase, epnum);
 
 		req = next_request(musb_ep);
 		if (!req)

@@ -440,6 +440,7 @@ static int __dwc3_gadget_ep_disable(stru
 
 	dep->stream_capable = false;
 	dep->desc = NULL;
+	dep->endpoint.desc = NULL;
 	dep->comp_desc = NULL;
 	dep->type = 0;
 	dep->flags = 0;

@@ -445,6 +445,7 @@ static void ep_init(struct udc_regs __io
 
 	VDBG(ep->dev, "ep-%d reset\n", ep->num);
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->ep.ops = &udc_ep_ops;
 	INIT_LIST_HEAD(&ep->queue);
 

@@ -558,6 +558,7 @@ static int at91_ep_disable (struct usb_e
 
 	/* restore the endpoint's pristine config */
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->ep.maxpacket = ep->maxpacket;
 
 	/* reset fifos and endpoint */

@@ -659,6 +659,7 @@ static int usba_ep_disable(struct usb_ep
 		return -EINVAL;
 	}
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 
 	list_splice_init(&ep->queue, &req_list);
 	if (ep->can_dma) {

@@ -2181,6 +2181,7 @@ static int ep_disable(struct usb_ep *ep)
 	} while (mEp->dir != direction);
 
 	mEp->desc = NULL;
+	mEp->ep.desc = NULL;
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;

@@ -1638,6 +1638,7 @@ static int qe_ep_disable(struct usb_ep *
 	/* Nuke all pending requests (does flush) */
 	nuke(ep, -ESHUTDOWN);
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	ep->tx_req = NULL;
 	qe_ep_reset(udc, ep->epnum);

@@ -659,6 +659,7 @@ static int fsl_ep_disable(struct usb_ep
 	nuke(ep, -ESHUTDOWN);
 
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	spin_unlock_irqrestore(&udc->lock, flags);
 

@@ -235,6 +235,7 @@ static void ep_reset(struct goku_udc_reg
 
 	ep->ep.maxpacket = MAX_FIFO_SIZE;
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	ep->irqs = 0;
 	ep->dma = 0;

@@ -487,6 +487,7 @@ static int langwell_ep_disable(struct us
 	nuke(ep, -ESHUTDOWN);
 
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 
 	spin_unlock_irqrestore(&dev->lock, flags);

@@ -608,6 +608,7 @@ static int  mv_ep_disable(struct usb_ep
 	nuke(ep, -ESHUTDOWN);
 
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 
 	spin_unlock_irqrestore(&udc->lock, flags);

@@ -251,6 +251,7 @@ static int omap_ep_disable(struct usb_ep
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	nuke (ep, -ESHUTDOWN);
 	ep->ep.maxpacket = ep->maxpacket;
 	ep->has_dma = 0;

@@ -1493,6 +1493,7 @@ static int pch_udc_pcd_ep_disable(struct
 	pch_udc_ep_disable(ep);
 	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	INIT_LIST_HEAD(&ep->queue);
 	spin_unlock_irqrestore(&ep->dev->lock, iflags);
 	return 0;

@@ -283,6 +283,7 @@ static int pxa25x_ep_disable (struct usb
 	pxa25x_ep_fifo_flush (_ep);
 
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->stopped = 1;
 
 	local_irq_restore(flags);

@@ -1192,6 +1193,7 @@ static void udc_reinit(struct pxa25x_udc
 			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
 
 		ep->desc = NULL;
+		ep->ep.desc = NULL;
 		ep->stopped = 0;
 		INIT_LIST_HEAD (&ep->queue);
 		ep->pio_irqs = 0;

@@ -816,6 +816,7 @@ static int s3c_hsudc_ep_disable(struct u
 	s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 
 	hsep->desc = 0;
+	hsep->ep.desc = NULL;
 	hsep->stopped = 1;
 
 	spin_unlock_irqrestore(&hsudc->lock, flags);

@@ -1005,6 +1006,7 @@ static void s3c_hsudc_initep(struct s3c_
 	hsep->ep.ops = &s3c_hsudc_ep_ops;
 	hsep->fifo = hsudc->regs + S3C_BR(epnum);
 	hsep->desc = 0;
+	hsep->ep.desc = NULL;
 	hsep->stopped = 0;
 	hsep->wedge = 0;
 

@@ -1148,6 +1148,7 @@ static int s3c2410_udc_ep_disable(struct
 	dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name);
 
 	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->halted = 1;
 
 	s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN);

@@ -1630,6 +1631,7 @@ static void s3c2410_udc_reinit(struct s3
 
 		ep->dev = dev;
 		ep->desc = NULL;
+		ep->ep.desc = NULL;
 		ep->halted = 0;
 		INIT_LIST_HEAD (&ep->queue);
 	}

@@ -941,6 +941,11 @@ static int usbhsg_stop(struct usbhs_priv
 	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
+static void usbhs_mod_gadget_release(struct device *pdev)
+{
+	/* do nothing */
+}
+
 int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv;

@@ -989,6 +994,7 @@ int usbhs_mod_gadget_probe(struct usbhs_
 	 */
 	dev_set_name(&gpriv->gadget.dev, "gadget");
 	gpriv->gadget.dev.parent	= dev;
+	gpriv->gadget.dev.release	= usbhs_mod_gadget_release;
 	gpriv->gadget.name		= "renesas_usbhs_udc";
 	gpriv->gadget.ops		= &usbhsg_gadget_ops;
 	gpriv->gadget.max_speed		= USB_SPEED_HIGH;

@@ -1043,6 +1043,8 @@ ep0_read (struct file *fd, char __user *
 // FIXME don't call this with the spinlock held ...
 				if (copy_to_user (buf, dev->req->buf, len))
 					retval = -EFAULT;
+				else
+					retval = len;
 				clean_req (dev->gadget->ep0, dev->req);
 				/* NOTE userspace can't yet choose to stall */
 			}

@@ -60,9 +60,9 @@ static struct usb_device_descriptor devi
 	/* .bDeviceClass =		USB_CLASS_COMM, */
 	/* .bDeviceSubClass =	0, */
 	/* .bDeviceProtocol =	0, */
-	.bDeviceClass =		0xEF,
-	.bDeviceSubClass =	2,
-	.bDeviceProtocol =	1,
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
 	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */

@@ -2641,6 +2641,16 @@ long do_futex(u32 __user *uaddr, int op,
 	}
 
 	switch (cmd) {
+	case FUTEX_LOCK_PI:
+	case FUTEX_UNLOCK_PI:
+	case FUTEX_TRYLOCK_PI:
+	case FUTEX_WAIT_REQUEUE_PI:
+	case FUTEX_CMP_REQUEUE_PI:
+		if (!futex_cmpxchg_enabled)
+			return -ENOSYS;
+	}
+
+	switch (cmd) {
 	case FUTEX_WAIT:
 		val3 = FUTEX_BITSET_MATCH_ANY;
 	case FUTEX_WAIT_BITSET:

@@ -2661,16 +2671,13 @@ long do_futex(u32 __user *uaddr, int op,
 		ret = futex_wake_op(uaddr, flags, uaddr2, val, val2, val3);
 		break;
 	case FUTEX_LOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, flags, val, timeout, 0);
+		ret = futex_lock_pi(uaddr, flags, val, timeout, 0);
 		break;
 	case FUTEX_UNLOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_unlock_pi(uaddr, flags);
+		ret = futex_unlock_pi(uaddr, flags);
 		break;
 	case FUTEX_TRYLOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, flags, 0, timeout, 1);
+		ret = futex_lock_pi(uaddr, flags, 0, timeout, 1);
 		break;
 	case FUTEX_WAIT_REQUEUE_PI:
 		val3 = FUTEX_BITSET_MATCH_ANY;

@@ -136,12 +136,13 @@ static int sysfs_sd_setsecdata(struct sy
 	void *old_secdata;
 	size_t old_secdata_len;
 
-	iattrs = sd->s_iattr;
-	if (!iattrs)
-		iattrs = sysfs_init_inode_attrs(sd);
-	if (!iattrs)
-		return -ENOMEM;
+	if (!sd->s_iattr) {
+		sd->s_iattr = sysfs_init_inode_attrs(sd);
+		if (!sd->s_iattr)
+			return -ENOMEM;
+	}
 
+	iattrs = sd->s_iattr;
 	old_secdata = iattrs->ia_secdata;
 	old_secdata_len = iattrs->ia_secdata_len;
 

@@ -159,7 +159,7 @@ static void serial_omap_stop_tx(struct u
 		serial_out(up, UART_IER, up->ier);
 	}
 
-	if (!up->use_dma && pdata->set_forceidle)
+	if (!up->use_dma && pdata && pdata->set_forceidle)
 		pdata->set_forceidle(up->pdev);
 
 	pm_runtime_mark_last_busy(&up->pdev->dev);

@@ -298,7 +298,7 @@ static void serial_omap_start_tx(struct
 	if (!up->use_dma) {
 		pm_runtime_get_sync(&up->pdev->dev);
 		serial_omap_enable_ier_thri(up);
-		if (pdata->set_noidle)
+		if (pdata && pdata->set_noidle)
 			pdata->set_noidle(up->pdev);
 		pm_runtime_mark_last_busy(&up->pdev->dev);
 		pm_runtime_put_autosuspend(&up->pdev->dev);

@@ -1613,7 +1613,7 @@ static int serial_omap_runtime_resume(st
 	struct uart_omap_port *up = dev_get_drvdata(dev);
 	struct omap_uart_port_info *pdata = dev->platform_data;
 
-	if (up) {
+	if (up && pdata) {
 		if (pdata->get_context_loss_count) {
 			u32 loss_cnt = pdata->get_context_loss_count(dev);
 

@@ -1331,7 +1331,7 @@ static void moxa_start(struct tty_struct
 	if (ch == NULL)
 		return;
 
-	if (!(ch->statusflags & TXSTOPPED))
+	if (!test_bit(TXSTOPPED, &ch->statusflags))
 		return;
 
 	MoxaPortTxEnable(ch);

@@ -516,6 +516,7 @@ int con_set_unimap(struct vc_data *vc, u
 	int err = 0, err1, i;
 	struct uni_pagedir *p, *q;
 
+	/* Save original vc_unipagdir_loc in case we allocate a new one */
 	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
 	if (p->readonly) return -EIO;
 	

@@ -528,26 +529,57 @@ int con_set_unimap(struct vc_data *vc, u
 		err1 = con_clear_unimap(vc, NULL);
 		if (err1) return err1;
 		
+		/*
+		 * Since refcount was > 1, con_clear_unimap() allocated a
+		 * a new uni_pagedir for this vc.  Re: p != q
+		 */
 		q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-		for (i = 0, l = 0; i < 32; i++)
+
+		/*
+		 * uni_pgdir is a 32*32*64 table with rows allocated
+		 * when its first entry is added.  The unicode value must
+		 * still be incremented for empty rows.  We are copying
+		 * entries from "p" (old) to "q" (new).
+		 */
+		l = 0;		/* unicode value */
+		for (i = 0; i < 32; i++)
 		if ((p1 = p->uni_pgdir[i]))
 			for (j = 0; j < 32; j++)
-			if ((p2 = p1[j]))
+			if ((p2 = p1[j])) {
 				for (k = 0; k < 64; k++, l++)
 				if (p2[k] != 0xffff) {
+					/*
+					 * Found one, copy entry for unicode
+					 * l with fontpos value p2[k].
+					 */
 					err1 = con_insert_unipair(q, l, p2[k]);
 					if (err1) {
 						p->refcount++;
 						*vc->vc_uni_pagedir_loc = (unsigned long)p;
 						con_release_unimap(q);
 						kfree(q);
-						return err1; 
+						return err1;
 					}
-              			}
-              	p = q;
-	} else if (p == dflt)
+				}
+			} else {
+				/* Account for row of 64 empty entries */
+				l += 64;
+			}
+		else
+			/* Account for empty table */
+			l += 32 * 64;
+
+		/*
+		 * Finished copying font table, set vc_uni_pagedir to new table
+		 */
+		p = q;
+	} else if (p == dflt) {
 		dflt = NULL;
-	
+	}
+
+	/*
+	 * Insert user specified unicode pairs into new table.
+	 */
 	while (ct--) {
 		unsigned short unicode, fontpos;
 		__get_user(unicode, &list->unicode);

@@ -557,11 +589,14 @@ int con_set_unimap(struct vc_data *vc, u
 		list++;
 	}
 	
+	/*
+	 * Merge with fontmaps of any other virtual consoles.
+	 */
 	if (con_unify_unimap(vc, p))
 		return err;
 
 	for (i = 0; i <= 3; i++)
-		set_inverse_transl(vc, p, i); /* Update all inverse translations */
+		set_inverse_transl(vc, p, i); /* Update inverse translations */
 	set_inverse_trans_unicode(vc, p);
   
 	return err;

@@ -217,8 +217,10 @@ retry:
 	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
+		if (!port->port.console) {
+			dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
+		}
 		set_bit(i, &port->write_urbs_free);
 		spin_lock_irqsave(&port->lock, flags);
 		port->tx_bytes -= count;

@@ -397,7 +397,7 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr = 0;
+	int rv, cntr;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 

@@ -406,7 +406,8 @@ static ssize_t wdm_read
 	if (rv < 0)
 		return -ERESTARTSYS;
 
-	if (desc->length == 0) {
+	cntr = ACCESS_ONCE(desc->length);
+	if (cntr == 0) {
 		desc->read = 0;
 retry:
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {

@@ -457,25 +458,30 @@ retry:
 			goto retry;
 		}
 		clear_bit(WDM_READ, &desc->flags);
+		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}
 
-	cntr = count > desc->length ? desc->length : count;
+	if (cntr > count)
+		cntr = count;
 	rv = copy_to_user(buffer, desc->ubuf, cntr);
 	if (rv > 0) {
 		rv = -EFAULT;
 		goto err;
 	}
 
+	spin_lock_irq(&desc->iuspin);
+
 	for (i = 0; i < desc->length - cntr; i++)
 		desc->ubuf[i] = desc->ubuf[i + cntr];
 
-	spin_lock_irq(&desc->iuspin);
 	desc->length -= cntr;
-	spin_unlock_irq(&desc->iuspin);
 	/* in case we had outstanding data */
 	if (!desc->length)
 		clear_bit(WDM_READ, &desc->flags);
+
+	spin_unlock_irq(&desc->iuspin);
+
 	rv = cntr;
 
 err:

@@ -457,7 +457,6 @@ retry:
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
-		clear_bit(WDM_READ, &desc->flags);
 		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}

@@ -769,7 +769,7 @@ static void fsl_queue_td(struct fsl_ep *
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-		dma_addr_t *dma, int *is_last)
+		dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
 {
 	u32 swap_temp;
 	struct ep_td_struct *dtd;

@@ -778,7 +778,7 @@ static struct ep_td_struct *fsl_build_dt
 	*length = min(req->req.length - req->req.actual,
 			(unsigned)EP_MAX_LENGTH_TRANSFER);
 
-	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
 	if (dtd == NULL)
 		return dtd;
 

@@ -828,7 +828,7 @@ static struct ep_td_struct *fsl_build_dt
 }
 
 /* Generate dtd chain for a request */
-static int fsl_req_to_dtd(struct fsl_req *req)
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
 {
 	unsigned	count;
 	int		is_last;

@@ -837,7 +837,7 @@ static int fsl_req_to_dtd(struct fsl_req
 	dma_addr_t dma;
 
 	do {
-		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+		dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
 		if (dtd == NULL)
 			return -ENOMEM;
 

@@ -911,13 +911,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct
 	req->req.actual = 0;
 	req->dtd_count = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-
 	/* build dtds and push them to device queue */
-	if (!fsl_req_to_dtd(req)) {
+	if (!fsl_req_to_dtd(req, gfp_flags)) {
+		spin_lock_irqsave(&udc->lock, flags);
 		fsl_queue_td(ep, req);
 	} else {
-		spin_unlock_irqrestore(&udc->lock, flags);
 		return -ENOMEM;
 	}
 

@@ -1296,7 +1294,7 @@ static int ep0_prime_status(struct fsl_u
 			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	req->mapped = 1;
 
-	if (fsl_req_to_dtd(req) == 0)
+	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
 		fsl_queue_td(ep, req);
 	else
 		return -ENOMEM;

@@ -1380,7 +1378,7 @@ static void ch9getstatus(struct fsl_udc
 	req->mapped = 1;
 
 	/* prime the data phase */
-	if ((fsl_req_to_dtd(req) == 0))
+	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
 		fsl_queue_td(ep, req);
 	else			/* no mem */
 		goto stall;

@@ -94,7 +94,6 @@ struct platform_device * __devinit fsl_u
 	pdev->dev.parent = &ofdev->dev;
 
 	pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
-	pdev->dev.dma_mask = &pdev->archdata.dma_mask;
 	*pdev->dev.dma_mask = *ofdev->dev.dma_mask;
 
 	retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));

@@ -507,9 +507,14 @@ static int __do_config_autodelink(struct
 {
 	int retval;
 	u8 cmnd[12] = {0};
+	u8 *buf;
 
 	US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len);
 
+	buf = kmemdup(data, len, GFP_NOIO);
+	if (!buf)
+		return USB_STOR_TRANSPORT_ERROR;
+
 	cmnd[0] = 0xF0;
 	cmnd[1] = 0x0E;
 	cmnd[2] = 0xfe;

@@ -517,7 +522,8 @@ static int __do_config_autodelink(struct
 	cmnd[4] = (u8)(len >> 8);
 	cmnd[5] = (u8)len;
 
-	retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, data, len, DMA_TO_DEVICE, NULL);
+	retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, buf, len, DMA_TO_DEVICE, NULL);
+	kfree(buf);
 	if (retval != USB_STOR_TRANSPORT_GOOD) {
 		return -EIO;
 	}

@@ -24,39 +24,44 @@
 
 static bool debug;
 
+#define DEVICE_G1K(v, p) \
+	USB_DEVICE(v, p), .driver_info = 1
+
 static const struct usb_device_id id_table[] = {
-	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
-	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
-	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
-	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
-	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	/* Gobi 1000 devices */
+	{DEVICE_G1K(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{DEVICE_G1K(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{DEVICE_G1K(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{DEVICE_G1K(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+
+	/* Gobi 2000 devices */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */

@@ -92,6 +97,8 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 
+	/* Gobi 3000 devices */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
 	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */

@@ -122,8 +129,10 @@ static int qcprobe(struct usb_serial *se
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
+	bool is_gobi1k = id->driver_info ? true : false;
 
 	dbg("%s", __func__);
+	dbg("Is Gobi 1000 = %d", is_gobi1k);
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);

@@ -169,15 +178,25 @@ static int qcprobe(struct usb_serial *se
 
 	case 3:
 	case 4:
-		/* Composite mode */
-		/* ifnum == 0 is a broadband network adapter */
-		if (ifnum == 1) {
-			/*
-			 * Diagnostics Monitor (serial line 9600 8N1)
-			 * Qualcomm DM protocol
-			 * use "libqcdm" (ModemManager) for communication
-			 */
-			dbg("Diagnostics Monitor found");
+		/* Composite mode; don't bind to the QMI/net interface as that
+		 * gets handled by other drivers.
+		 */
+
+		/* Gobi 1K USB layout:
+		 * 0: serial port (doesn't respond)
+		 * 1: serial port (doesn't respond)
+		 * 2: AT-capable modem port
+		 * 3: QMI/net
+		 *
+		 * Gobi 2K+ USB layout:
+		 * 0: QMI/net
+		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: AT-capable modem port
+		 * 3: NMEA
+		 */
+
+		if (ifnum == 1 && !is_gobi1k) {
+			dbg("Gobi 2K+ DM/DIAG interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,

@@ -196,13 +215,13 @@ static int qcprobe(struct usb_serial *se
 				retval = -ENODEV;
 				kfree(data);
 			}
-		} else if (ifnum==3) {
+		} else if (ifnum==3 && !is_gobi1k) {
 			/*
 			 * NMEA (serial line 9600 8N1)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
-			dbg("NMEA GPS interface found");
+			dbg("Gobi 2K+ NMEA GPS interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,

@@ -537,6 +537,10 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },

@@ -689,6 +689,10 @@
 #define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
 #define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
 #define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201

@@ -49,6 +49,7 @@ static int cp210x_tiocmset_port(struct u
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static bool debug;

@@ -121,6 +122,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */

@@ -149,6 +152,10 @@ static const struct usb_device_id id_tab
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+struct cp210x_port_private {
+	__u8			bInterfaceNumber;
+};
+
 static struct usb_driver cp210x_driver = {
 	.name		= "cp210x",
 	.probe		= usb_serial_probe,

@@ -174,6 +181,7 @@ static struct usb_serial_driver cp210x_d
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
+	.release		= cp210x_release,
 	.dtr_rts		= cp210x_dtr_rts
 };
 

@@ -261,6 +269,7 @@ static int cp210x_get_config(struct usb_
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 

@@ -276,7 +285,7 @@ static int cp210x_get_config(struct usb_
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 
 	/* Convert data into an array of integers */
 	for (i = 0; i < length; i++)

@@ -307,6 +316,7 @@ static int cp210x_set_config(struct usb_
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 

@@ -328,12 +338,12 @@ static int cp210x_set_config(struct usb_
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, data[0],
-				0, NULL, 0, 300);
+				port_priv->bInterfaceNumber, NULL, 0, 300);
 	}
 
 	kfree(buf);

@@ -844,11 +854,39 @@ static void cp210x_break_ctl (struct tty
 
 static int cp210x_startup(struct usb_serial *serial)
 {
+	struct cp210x_port_private *port_priv;
+	int i;
+
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+		if (!port_priv)
+			return -ENOMEM;
+
+		memset(port_priv, 0x00, sizeof(*port_priv));
+		port_priv->bInterfaceNumber =
+		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+		usb_set_serial_port_data(serial->port[i], port_priv);
+	}
+
 	return 0;
 }
 
+static void cp210x_release(struct usb_serial *serial)
+{
+	struct cp210x_port_private *port_priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(port_priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
+}
+
 static int __init cp210x_init(void)
 {
 	int retval;

@@ -174,6 +174,7 @@
 
 #define CLK_MULTI_REGISTER         ((__u16)(0x02))
 #define CLK_START_VALUE_REGISTER   ((__u16)(0x03))
+#define GPIO_REGISTER              ((__u16)(0x07))
 
 #define SERIAL_LCR_DLAB            ((__u16)(0x0080))
 

@@ -1101,14 +1102,25 @@ static int mos7840_open(struct tty_struc
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
-
-	usb_fill_bulk_urb(mos7840_port->read_urb,
-			  serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  mos7840_port->read_urb->transfer_buffer_length,
-			  mos7840_bulk_in_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				(port->bulk_in_endpointAddress) + 2),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	}
 
 	dbg("mos7840_open: bulkin endpoint is %d",
 	    port->bulk_in_endpointAddress);

@@ -1519,13 +1531,25 @@ static int mos7840_write(struct tty_stru
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 	/* fill urb with data and submit  */
-	usb_fill_bulk_urb(urb,
-			  serial->dev,
-			  usb_sndbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-			  urb->transfer_buffer,
-			  transfer_size,
-			  mos7840_bulk_out_data_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				(port->bulk_out_endpointAddress) + 2),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	}
 
 	data1 = urb->transfer_buffer;
 	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);

@@ -1838,7 +1862,7 @@ static int mos7840_send_cmd_write_baud_r
 
 	} else {
 #ifdef HW_flow_control
-		/ *setting h/w flow control bit to 0 */
+		/* setting h/w flow control bit to 0 */
 		Data = 0xb;
 		mos7840_port->shadowMCR = Data;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,

@@ -2305,19 +2329,26 @@ static int mos7840_ioctl(struct tty_stru
 
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
-	int mos7840_num_ports = 0;
+	__u16 Data = 0x00;
+	int ret = 0;
+	int mos7840_num_ports;
 
-	dbg("numberofendpoints: cur %d, alt %d",
-	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
-	    (int)serial->interface->altsetting->desc.bNumEndpoints);
-	if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
-		mos7840_num_ports = serial->num_ports = 2;
-	} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	if ((Data & 0x01) == 0) {
+		mos7840_num_ports = 2;
+		serial->num_bulk_in = 2;
+		serial->num_bulk_out = 2;
+		serial->num_ports = 2;
+	} else {
+		mos7840_num_ports = 4;
 		serial->num_bulk_in = 4;
 		serial->num_bulk_out = 4;
-		mos7840_num_ports = serial->num_ports = 4;
+		serial->num_ports = 4;
 	}
-	dbg ("mos7840_num_ports = %d", mos7840_num_ports);
+
 	return mos7840_num_ports;
 }
 

@@ -922,6 +922,7 @@ static struct usb_device_id rt2800usb_de
 	{ USB_DEVICE(0x07d1, 0x3c13) },
 	{ USB_DEVICE(0x07d1, 0x3c15) },
 	{ USB_DEVICE(0x07d1, 0x3c16) },
+	{ USB_DEVICE(0x2001, 0x3c1b) },
 	/* Draytek */
 	{ USB_DEVICE(0x07fa, 0x7712) },
 	/* DVICO */

@@ -657,6 +657,8 @@ static void _rtl_receive_one(struct ieee
 		return;
 
 	uskb = dev_alloc_skb(skb->len + 128);
+	if (!uskb)
+		return;		/* exit if allocation failed */
 	memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status, sizeof(rx_status));
 	pdata = (u8 *)skb_put(uskb, skb->len);
 	memcpy(pdata, skb->data, skb->len);

@@ -788,6 +788,8 @@ void rtl92c_set_fw_rsvdpagepkt(struct ie
 
 
 	skb = dev_alloc_skb(totalpacketlen);
+	if (!skb)
+		return;
 	memcpy((u8 *) skb_put(skb, totalpacketlen),
 	       &reserved_page_packet, totalpacketlen);
 

@@ -763,12 +763,16 @@ void rtl92d_set_fw_rsvdpagepkt(struct ie
 		      "rtl92d_set_fw_rsvdpagepkt(): HW_VAR_SET_TX_CMD: ALL\n",
 		      u1RsvdPageLoc, 3);
 	skb = dev_alloc_skb(totalpacketlen);
-	memcpy((u8 *) skb_put(skb, totalpacketlen), &reserved_page_packet,
-		totalpacketlen);
-	rtstatus = _rtl92d_cmd_send_packet(hw, skb);
+	if (!skb) {
+		dlok = false;
+	} else {
+		memcpy((u8 *) skb_put(skb, totalpacketlen),
+			&reserved_page_packet, totalpacketlen);
+		rtstatus = _rtl92d_cmd_send_packet(hw, skb);
 
-	if (rtstatus)
-		dlok = true;
+		if (rtstatus)
+			dlok = true;
+	}
 	if (dlok) {
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
 			("Set RSVD page location to Fw.\n"));

@@ -520,12 +520,14 @@ static void _rtl_usb_rx_process_noagg(st
 			u8 *pdata;
 
 			uskb = dev_alloc_skb(skb->len + 128);
-			memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status,
-			       sizeof(rx_status));
-			pdata = (u8 *)skb_put(uskb, skb->len);
-			memcpy(pdata, skb->data, skb->len);
+			if (uskb) {	/* drop packet on allocation failure */
+				memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status,
+				       sizeof(rx_status));
+				pdata = (u8 *)skb_put(uskb, skb->len);
+				memcpy(pdata, skb->data, skb->len);
+				ieee80211_rx_irqsafe(hw, uskb);
+			}
 			dev_kfree_skb_any(skb);
-			ieee80211_rx_irqsafe(hw, uskb);
 		} else {
 			dev_kfree_skb_any(skb);
 		}

@@ -1157,10 +1157,12 @@ static void _rtl_pci_free_tx_ring(struct
 		ring->idx = (ring->idx + 1) % ring->entries;
 	}
 
-	pci_free_consistent(rtlpci->pdev,
-			    sizeof(*ring->desc) * ring->entries,
-			    ring->desc, ring->dma);
-	ring->desc = NULL;
+	if (ring->desc) {
+		pci_free_consistent(rtlpci->pdev,
+				    sizeof(*ring->desc) * ring->entries,
+				    ring->desc, ring->dma);
+		ring->desc = NULL;
+	}
 }
 
 static void _rtl_pci_free_rx_ring(struct rtl_pci *rtlpci)

@@ -1184,12 +1186,14 @@ static void _rtl_pci_free_rx_ring(struct
 			kfree_skb(skb);
 		}
 
-		pci_free_consistent(rtlpci->pdev,
+		if (rtlpci->rx_ring[rx_queue_idx].desc) {
+			pci_free_consistent(rtlpci->pdev,
 				    sizeof(*rtlpci->rx_ring[rx_queue_idx].
 					   desc) * rtlpci->rxringcount,
 				    rtlpci->rx_ring[rx_queue_idx].desc,
 				    rtlpci->rx_ring[rx_queue_idx].dma);
-		rtlpci->rx_ring[rx_queue_idx].desc = NULL;
+			rtlpci->rx_ring[rx_queue_idx].desc = NULL;
+		}
 	}
 }
 

@@ -1219,13 +1219,18 @@ static void rtl92c_dm_refresh_rate_adapt
 				 ("PreState = %d, CurState = %d\n",
 				  p_ra->pre_ratr_state, p_ra->ratr_state));
 
-			rcu_read_lock();
-			sta = ieee80211_find_sta(mac->vif, mac->bssid);
+			/* Only the PCI card uses sta in the update rate table
+			 * callback routine */
+			if (rtlhal->interface == INTF_PCI) {
+				rcu_read_lock();
+				sta = ieee80211_find_sta(mac->vif, mac->bssid);
+			}
 			rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
 					p_ra->ratr_state);
 
 			p_ra->pre_ratr_state = p_ra->ratr_state;
-			rcu_read_unlock();
+			if (rtlhal->interface == INTF_PCI)
+				rcu_read_unlock();
 		}
 	}
 }

@@ -524,6 +524,10 @@ void rtl92c_dm_write_dig(struct ieee8021
 		  dm_digtable.cur_igvalue, dm_digtable.pre_igvalue,
 		  dm_digtable.backoff_val));
 
+	dm_digtable.cur_igvalue += 2;
+	if (dm_digtable.cur_igvalue > 0x3f)
+		dm_digtable.cur_igvalue = 0x3f;
+
 	if (dm_digtable.pre_igvalue != dm_digtable.cur_igvalue) {
 		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, 0x7f,
 			      dm_digtable.cur_igvalue);

@@ -1381,6 +1381,10 @@ static int pl011_startup(struct uart_por
 
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
+	/* Clear pending error and receive interrupts */
+	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+	       UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+
 	/*
 	 * Allocate the IRQ
 	 */

@@ -1417,10 +1421,6 @@ static int pl011_startup(struct uart_por
 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
-	/* Clear pending error interrupts */
-	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
-	       uap->port.membase + UART011_ICR);
-
 	/*
 	 * initialise the old status of the modem signals
 	 */

@@ -1435,6 +1435,9 @@ static int pl011_startup(struct uart_por
 	 * as well.
 	 */
 	spin_lock_irq(&uap->port.lock);
+	/* Clear out any spuriously appearing RX interrupts */
+	 writew(UART011_RTIS | UART011_RXIS,
+		uap->port.membase + UART011_ICR);
 	uap->im = UART011_RTIM;
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;

@@ -1927,6 +1930,10 @@ static int pl011_probe(struct amba_devic
 		goto unmap;
 	}
 
+	/* Ensure interrupts from this UART are masked and cleared */
+	writew(0, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+
 	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;

@@ -1465,20 +1465,10 @@ void iwl_bg_watchdog(unsigned long data)
 	if (timeout == 0)
 		return;
 
-	/* monitor and check for stuck cmd queue */
-	if (iwl_check_stuck_queue(priv, priv->shrd->cmd_queue))
-		return;
-
-	/* monitor and check for other stuck queues */
-	if (iwl_is_any_associated(priv)) {
-		for (cnt = 0; cnt < hw_params(priv).max_txq_num; cnt++) {
-			/* skip as we already checked the command queue */
-			if (cnt == priv->shrd->cmd_queue)
-				continue;
-			if (iwl_check_stuck_queue(priv, cnt))
-				return;
-		}
-	}
+	/* monitor and check for stuck queues */
+	for (cnt = 0; cnt < hw_params(priv).max_txq_num; cnt++)
+		if (iwl_check_stuck_queue(priv, cnt))
+			return;
 
 	mod_timer(&priv->watchdog, jiffies +
 		  msecs_to_jiffies(IWL_WD_TICK(timeout)));

@@ -118,13 +118,15 @@ void ath9k_ps_restore(struct ath_softc *
 	if (--sc->ps_usecount != 0)
 		goto unlock;
 
-	if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
+	if (sc->ps_flags & PS_WAIT_FOR_TX_ACK)
+		goto unlock;
+
+	if (sc->ps_idle)
 		mode = ATH9K_PM_FULL_SLEEP;
 	else if (sc->ps_enabled &&
 		 !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 			      PS_WAIT_FOR_CAB |
-			      PS_WAIT_FOR_PSPOLL_DATA |
-			      PS_WAIT_FOR_TX_ACK)))
+			      PS_WAIT_FOR_PSPOLL_DATA)))
 		mode = ATH9K_PM_NETWORK_SLEEP;
 	else
 		goto unlock;

@@ -6,6 +6,8 @@
 
 #if BITS_PER_LONG == 64
 
+#define div64_long(x,y) div64_s64((x),(y))
+
 /**
  * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
  *

@@ -45,6 +47,8 @@ static inline s64 div64_s64(s64 dividend
 
 #elif BITS_PER_LONG == 32
 
+#define div64_long(x,y) div_s64((x),(y))
+
 #ifndef div_u64_rem
 static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
 {

@@ -275,7 +275,7 @@ static inline s64 ntp_update_offset_fll(
 
 	time_status |= STA_MODE;
 
-	return div_s64(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
+	return div64_long(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
 }
 
 static void ntp_update_offset(long offset)

@@ -29,16 +29,17 @@
 
 u64 uevent_seqnum;
 char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
-static DEFINE_SPINLOCK(sequence_lock);
 #ifdef CONFIG_NET
 struct uevent_sock {
 	struct list_head list;
 	struct sock *sk;
 };
 static LIST_HEAD(uevent_sock_list);
-static DEFINE_MUTEX(uevent_sock_mutex);
 #endif
 
+/* This lock protects uevent_seqnum and uevent_sock_list */
+static DEFINE_MUTEX(uevent_sock_mutex);
+
 /* the strings here must match the enum in include/linux/kobject.h */
 static const char *kobject_actions[] = {
 	[KOBJ_ADD] =		"add",

@@ -136,7 +137,6 @@ int kobject_uevent_env(struct kobject *k
 	struct kobject *top_kobj;
 	struct kset *kset;
 	const struct kset_uevent_ops *uevent_ops;
-	u64 seq;
 	int i = 0;
 	int retval = 0;
 #ifdef CONFIG_NET

@@ -243,17 +243,16 @@ int kobject_uevent_env(struct kobject *k
 	else if (action == KOBJ_REMOVE)
 		kobj->state_remove_uevent_sent = 1;
 
+	mutex_lock(&uevent_sock_mutex);
 	/* we will send an event, so request a new sequence number */
-	spin_lock(&sequence_lock);
-	seq = ++uevent_seqnum;
-	spin_unlock(&sequence_lock);
-	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
-	if (retval)
+	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)++uevent_seqnum);
+	if (retval) {
+		mutex_unlock(&uevent_sock_mutex);
 		goto exit;
+	}
 
 #if defined(CONFIG_NET)
 	/* send netlink message */
-	mutex_lock(&uevent_sock_mutex);
 	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
 		struct sock *uevent_sock = ue_sk->sk;
 		struct sk_buff *skb;

@@ -290,8 +289,8 @@ int kobject_uevent_env(struct kobject *k
 		} else
 			retval = -ENOMEM;
 	}
-	mutex_unlock(&uevent_sock_mutex);
 #endif
+	mutex_unlock(&uevent_sock_mutex);
 
 	/* call uevent_helper, usually only enabled during early boot */
 	if (uevent_helper[0] && !kobj_usermode_filter(kobj)) {

@@ -61,8 +61,7 @@ int irq_set_irq_type(unsigned int irq, u
 		return -EINVAL;
 
 	type &= IRQ_TYPE_SENSE_MASK;
-	if (type != IRQ_TYPE_NONE)
-		ret = __irq_set_trigger(desc, irq, type);
+	ret = __irq_set_trigger(desc, irq, type);
 	irq_put_desc_busunlock(desc, flags);
 	return ret;
 }

@@ -773,7 +773,7 @@ static int irq_thread(void *data)
 			struct irqaction *action);
 	int wake;
 
-	if (force_irqthreads & test_bit(IRQTF_FORCED_THREAD,
+	if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
 					&action->thread_flags))
 		handler_fn = irq_forced_thread_fn;
 	else

@@ -763,6 +763,14 @@ static int rtc_timer_enqueue(struct rtc_
 	return 0;
 }
 
+static void rtc_alarm_disable(struct rtc_device *rtc)
+{
+	if (!rtc->ops || !rtc->ops->alarm_irq_enable)
+		return;
+
+	rtc->ops->alarm_irq_enable(rtc->dev.parent, false);
+}
+
 /**
  * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
  * @rtc rtc device

@@ -784,8 +792,10 @@ static void rtc_timer_remove(struct rtc_
 		struct rtc_wkalrm alarm;
 		int err;
 		next = timerqueue_getnext(&rtc->timerqueue);
-		if (!next)
+		if (!next) {
+			rtc_alarm_disable(rtc);
 			return;
+		}
 		alarm.time = rtc_ktime_to_tm(next->expires);
 		alarm.enabled = 1;
 		err = __rtc_set_alarm(rtc, &alarm);

@@ -847,7 +857,8 @@ again:
 		err = __rtc_set_alarm(rtc, &alarm);
 		if (err == -ETIME)
 			goto again;
-	}
+	} else
+		rtc_alarm_disable(rtc);
 
 	mutex_unlock(&rtc->ops_lock);
 }

@@ -618,19 +618,19 @@ static int __devinit p54spi_probe(struct
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "spi_setup failed");
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_power, "p54spi power");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free_gpio_power;
 	}
 
 	gpio_direction_output(p54spi_gpio_power, 0);

@@ -641,7 +641,7 @@ static int __devinit p54spi_probe(struct
 			  priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_common;
+		goto err_free_gpio_irq;
 	}
 
 	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);

@@ -673,6 +673,12 @@ static int __devinit p54spi_probe(struct
 	return 0;
 
 err_free_common:
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+	gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+	gpio_free(p54spi_gpio_power);
+err_free:
 	p54_free_common(priv->hw);
 	return ret;
 }

@@ -1133,6 +1133,8 @@ static const struct nla_policy ifla_vf_p
 				    .len = sizeof(struct ifla_vf_vlan) },
 	[IFLA_VF_TX_RATE]	= { .type = NLA_BINARY,
 				    .len = sizeof(struct ifla_vf_tx_rate) },
+	[IFLA_VF_SPOOFCHK]	= { .type = NLA_BINARY,
+				    .len = sizeof(struct ifla_vf_spoofchk) },
 };
 
 static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {

@@ -364,6 +364,9 @@ iscsi_iser_conn_bind(struct iscsi_cls_se
 	}
 	ib_conn = ep->dd_data;
 
+	if (iser_alloc_rx_descriptors(ib_conn))
+		return -ENOMEM;
+
 	/* binds the iSER connection retrieved from the previously
 	 * connected ep_handle to the iSCSI layer connection. exchanges
 	 * connection pointers */

@@ -398,19 +401,6 @@ iscsi_iser_conn_stop(struct iscsi_cls_co
 	iser_conn->ib_conn = NULL;
 }
 
-static int
-iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn)
-{
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	int err;
-
-	err = iser_conn_set_full_featured_mode(conn);
-	if (err)
-		return err;
-
-	return iscsi_conn_start(cls_conn);
-}
-
 static void iscsi_iser_session_destroy(struct iscsi_cls_session *cls_session)
 {
 	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);

@@ -724,7 +714,7 @@ static struct iscsi_transport iscsi_iser
 	.get_conn_param		= iscsi_conn_get_param,
 	.get_ep_param		= iscsi_iser_get_ep_param,
 	.get_session_param	= iscsi_session_get_param,
-	.start_conn             = iscsi_iser_conn_start,
+	.start_conn             = iscsi_conn_start,
 	.stop_conn              = iscsi_iser_conn_stop,
 	/* iscsi host params */
 	.get_host_param		= iscsi_host_get_param,

@@ -366,4 +366,5 @@ int iser_dma_map_task_data(struct iscsi_
 void iser_dma_unmap_task_data(struct iscsi_iser_task *iser_task);
 int  iser_initialize_task_headers(struct iscsi_task *task,
 			struct iser_tx_desc *tx_desc);
+int iser_alloc_rx_descriptors(struct iser_conn *ib_conn);
 #endif

@@ -170,7 +170,7 @@ static void iser_create_send_desc(struct
 }
 
 
-static int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
+int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
 {
 	int i, j;
 	u64 dma_addr;

@@ -242,23 +242,24 @@ void iser_free_rx_descriptors(struct ise
 	kfree(ib_conn->rx_descs);
 }
 
-/**
- *  iser_conn_set_full_featured_mode - (iSER API)
- */
-int iser_conn_set_full_featured_mode(struct iscsi_conn *conn)
+static int iser_post_rx_bufs(struct iscsi_conn *conn, struct iscsi_hdr *req)
 {
 	struct iscsi_iser_conn *iser_conn = conn->dd_data;
 
-	iser_dbg("Initially post: %d\n", ISER_MIN_POSTED_RX);
+	iser_dbg("req op %x flags %x\n", req->opcode, req->flags);
+	/* check if this is the last login - going to full feature phase */
+	if ((req->flags & ISCSI_FULL_FEATURE_PHASE) != ISCSI_FULL_FEATURE_PHASE)
+		return 0;
 
-	/* Check that there is no posted recv or send buffers left - */
-	/* they must be consumed during the login phase */
-	BUG_ON(iser_conn->ib_conn->post_recv_buf_count != 0);
-	BUG_ON(atomic_read(&iser_conn->ib_conn->post_send_buf_count) != 0);
-
-	if (iser_alloc_rx_descriptors(iser_conn->ib_conn))
-		return -ENOMEM;
+	/*
+	 * Check that there is one posted recv buffer (for the last login
+	 * response) and no posted send buffers left - they must have been
+	 * consumed during previous login phases.
+	 */
+	WARN_ON(iser_conn->ib_conn->post_recv_buf_count != 1);
+	WARN_ON(atomic_read(&iser_conn->ib_conn->post_send_buf_count) != 0);
 
+	iser_dbg("Initially post: %d\n", ISER_MIN_POSTED_RX);
 	/* Initial post receive buffers */
 	if (iser_post_recvm(iser_conn->ib_conn, ISER_MIN_POSTED_RX))
 		return -ENOMEM;

@@ -438,6 +439,9 @@ int iser_send_control(struct iscsi_conn
 		err = iser_post_recvl(iser_conn->ib_conn);
 		if (err)
 			goto send_control_error;
+		err = iser_post_rx_bufs(conn, task->hdr);
+		if (err)
+			goto send_control_error;
 	}
 
 	err = iser_post_send(iser_conn->ib_conn, mdesc);

@@ -394,7 +394,7 @@ static int mlx4_how_many_lives_vf(struct
 	return ret;
 }
 
-static int mlx4_is_slave_active(struct mlx4_dev *dev, int slave)
+int mlx4_is_slave_active(struct mlx4_dev *dev, int slave)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	struct mlx4_slave_state *s_slave;

@@ -3967,18 +3967,36 @@ int mp_find_ioapic_pin(int ioapic, u32 g
 static __init int bad_ioapic(unsigned long address)
 {
 	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
-		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+		pr_warn("WARNING: Max # of I/O APICs (%d) exceeded (found %d), skipping\n",
+			MAX_IO_APICS, nr_ioapics);
 		return 1;
 	}
 	if (!address) {
-		printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
+		pr_warn("WARNING: Bogus (zero) I/O APIC address found in table, skipping!\n");
 		return 1;
 	}
 	return 0;
 }
 
+static __init int bad_ioapic_register(int idx)
+{
+	union IO_APIC_reg_00 reg_00;
+	union IO_APIC_reg_01 reg_01;
+	union IO_APIC_reg_02 reg_02;
+
+	reg_00.raw = io_apic_read(idx, 0);
+	reg_01.raw = io_apic_read(idx, 1);
+	reg_02.raw = io_apic_read(idx, 2);
+
+	if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) {
+		pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n",
+			mpc_ioapic_addr(idx));
+		return 1;
+	}
+
+	return 0;
+}
+
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 {
 	int idx = 0;