Skip to contentSkip to conversation

3.0.27-stable review

PATCH In review Greg KH 4 participants 116 messages Mar 30, 2012 – Apr 13, 2012

Subsystems (66)
lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

cover 3.0.27-stable review

This is the start of the stable review cycle for the 3.0.27 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Apr 1 19:57:16 UTC 2012. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.27-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------

 Makefile                                          |    4 +-
 arch/x86/include/asm/kvm_emulate.h                |   16 +++
 arch/x86/kernel/apic/io_apic.c                    |   40 ++++++--
 arch/x86/kernel/entry_32.S                        |   17 ++--
 arch/x86/kernel/tls.c                             |    4 +-
 arch/x86/kernel/tsc.c                             |   10 ++
 arch/x86/kernel/vm86_32.c                         |    2 +
 arch/x86/kvm/emulate.c                            |   51 ++++++++++
 arch/x86/kvm/x86.c                                |   23 +++++
 arch/x86/net/bpf_jit_comp.c                       |   14 +--
 drivers/ata/pata_legacy.c                         |    3 +-
 drivers/bluetooth/ath3k.c                         |    1 +
 drivers/bluetooth/btusb.c                         |   10 +-
 drivers/firewire/ohci.c                           |    5 +-
 drivers/gpu/drm/i915/i915_drv.c                   |    7 ++
 drivers/gpu/drm/i915/intel_drv.h                  |    2 +-
 drivers/gpu/drm/i915/intel_fb.c                   |   10 ++
 drivers/gpu/drm/radeon/radeon_atombios.c          |   14 +++
 drivers/gpu/drm/radeon/radeon_connectors.c        |    4 +
 drivers/gpu/drm/radeon/radeon_cursor.c            |   13 ++-
 drivers/gpu/drm/radeon/radeon_object.c            |   18 +++-
 drivers/gpu/drm/radeon/radeon_object.h            |    2 +
 drivers/hid/hid-chicony.c                         |    7 ++
 drivers/hid/hid-core.c                            |    1 +
 drivers/hid/hid-ids.h                             |    1 +
 drivers/hwmon/fam15h_power.c                      |    2 +-
 drivers/infiniband/ulp/iser/iscsi_iser.c          |   18 +---
 drivers/infiniband/ulp/iser/iscsi_iser.h          |    1 +
 drivers/infiniband/ulp/iser/iser_initiator.c      |   30 +++---
 drivers/md/bitmap.c                               |    2 +
 drivers/md/dm-crypt.c                             |   38 +++----
 drivers/md/dm-exception-store.c                   |    2 +-
 drivers/md/raid1.c                                |   17 +++-
 drivers/md/raid10.c                               |   17 +++-
 drivers/media/dvb/frontends/lgdt330x.c            |    6 +-
 drivers/media/video/pvrusb2/pvrusb2-devattr.c     |   10 ++
 drivers/mtd/ubi/scan.c                            |    8 +-
 drivers/mtd/ubi/wl.c                              |   10 +-
 drivers/net/e1000e/e1000.h                        |    1 +
 drivers/net/e1000e/netdev.c                       |   23 ++++-
 drivers/net/sky2.c                                |   11 +++
 drivers/net/usb/usbnet.c                          |   10 +-
 drivers/net/wireless/p54/p54spi.c                 |   14 ++-
 drivers/net/wireless/rt2x00/rt2800usb.c           |    1 +
 drivers/net/wireless/rtlwifi/pci.c                |   16 +--
 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c |   15 ++-
 drivers/rtc/interface.c                           |   15 ++-
 drivers/target/loopback/tcm_loop.c                |    6 ++
 drivers/target/target_core_alua.c                 |    7 +-
 drivers/target/target_core_cdb.c                  |    2 +-
 drivers/target/tcm_fc/tfc_cmd.c                   |    6 +-
 drivers/tty/moxa.c                                |    2 +-
 drivers/tty/serial/amba-pl011.c                   |   15 ++-
 drivers/tty/serial/sh-sci.c                       |   15 ++-
 drivers/tty/vt/consolemap.c                       |   51 ++++++++--
 drivers/usb/class/cdc-wdm.c                       |   17 ++--
 drivers/usb/gadget/fsl_udc_core.c                 |   18 ++--
 drivers/usb/gadget/hid.c                          |    6 +-
 drivers/usb/gadget/inode.c                        |    2 +
 drivers/usb/host/ehci-fsl.c                       |    4 +
 drivers/usb/host/ehci-fsl.h                       |    1 +
 drivers/usb/host/fsl-mph-dr-of.c                  |    1 -
 drivers/usb/musb/musb_gadget.c                    |   18 ++++
 drivers/usb/serial/cp210x.c                       |   44 ++++++++-
 drivers/usb/serial/ftdi_sio.c                     |   32 ++++--
 drivers/usb/serial/ftdi_sio.h                     |    3 +-
 drivers/usb/serial/ftdi_sio_ids.h                 |   19 +++-
 drivers/usb/serial/generic.c                      |    4 +-
 drivers/usb/serial/mos7840.c                      |   83 +++++++++++-----
 drivers/usb/serial/option.c                       |   16 +++
 drivers/usb/serial/qcserial.c                     |  109 ++++++++++++++-------
 drivers/video/backlight/tosa_lcd.c                |    2 +-
 drivers/video/fbmem.c                             |   18 +++-
 drivers/video/udlfb.c                             |    2 +-
 drivers/video/uvesafb.c                           |   12 ++-
 fs/cifs/connect.c                                 |    3 +-
 fs/dcache.c                                       |    3 +-
 fs/ext4/ext4_jbd2.h                               |   56 ++++++-----
 fs/ext4/extents.c                                 |    2 +
 fs/ext4/inode.c                                   |   45 ++++++---
 fs/hugetlbfs/inode.c                              |   25 ++---
 fs/jbd2/transaction.c                             |    2 +
 fs/lockd/svc.c                                    |    2 +-
 fs/nfs/delegation.c                               |   11 +++
 fs/nfs/delegation.h                               |    1 +
 fs/nfs/nfs4_fs.h                                  |    3 +
 fs/nfs/nfs4proc.c                                 |   31 +++++-
 fs/nfs/nfs4state.c                                |   29 +++++-
 fs/proc/namespaces.c                              |    2 +-
 fs/proc/task_mmu.c                                |    9 ++
 fs/sysfs/inode.c                                  |   11 ++-
 fs/udf/file.c                                     |    2 -
 fs/xfs/xfs_iget.c                                 |   18 ++--
 fs/xfs/xfs_log_recover.c                          |   33 +++----
 include/asm-generic/pgtable.h                     |   61 ++++++++++++
 include/asm-generic/unistd.h                      |    2 +-
 include/linux/fb.h                                |    1 +
 include/linux/math64.h                            |    4 +
 kernel/futex.c                                    |   19 ++--
 kernel/irq/chip.c                                 |    3 +-
 kernel/irq/manage.c                               |    2 +-
 kernel/module.c                                   |    3 +-
 kernel/power/hibernate.c                          |    7 +-
 kernel/time/ntp.c                                 |    2 +-
 lib/kobject_uevent.c                              |   19 ++--
 mm/bootmem.c                                      |    5 +-
 mm/memcontrol.c                                   |    4 +
 mm/memory.c                                       |   16 ++-
 mm/mempolicy.c                                    |    2 +-
 mm/mincore.c                                      |    2 +-
 mm/pagewalk.c                                     |    2 +-
 mm/slub.c                                         |    3 +-
 mm/sparse.c                                       |   30 +++---
 mm/swapfile.c                                     |    4 +-
 net/core/dev.c                                    |    3 +-
 net/ipv6/route.c                                  |    8 +-
 net/l2tp/l2tp_ppp.c                               |    2 +-
 net/rds/send.c                                    |    1 -
 net/sunrpc/cache.c                                |    2 +
 net/sunrpc/sched.c                                |   15 ++-
 net/xfrm/xfrm_replay.c                            |    6 +-
 sound/soc/pxa/pxa-ssp.c                           |   61 +++++++-----
 122 files changed, 1184 insertions(+), 454 deletions(-)
author maintainer
#1 lore raw

PATCH 1/108 USB: option: Add MediaTek MT6276M modem&app interfaces

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Meng Zhang <[email protected]>

commit 0d8520a1d7f43328bc7085d4244d93c595064157 upstream.

Add MEDIATEK products to Option driver

---
 drivers/usb/serial/option.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/usb/serial/option.c +7 -0
@@ -484,6 +484,9 @@ static void option_instat_callback(struc
 #define LG_VENDOR_ID				0x1004
 #define LG_PRODUCT_L02C				0x618f
 
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID			0x0e8d
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -1198,6 +1201,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
author maintainer
#2 lore raw

PATCH 2/108 USB: option driver: adding support for Telit CC864-SINGLE, CC864-DUAL and DE910-DUAL modems

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <[email protected]>

commit 7204cf584836c24b4b06e4ad4a8e6bb8ea84908e upstream.

Adding PID for Telit CC864-SINGLE, CC864-DUAL and DE910-DUAL modems

---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/serial/option.c +6 -0
@@ -307,6 +307,9 @@ static void option_instat_callback(struc
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 #define TELIT_PRODUCT_UC864G			0x1004
+#define TELIT_PRODUCT_CC864_DUAL		0x1005
+#define TELIT_PRODUCT_CC864_SINGLE		0x1006
+#define TELIT_PRODUCT_DE910_DUAL		0x1010
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -771,6 +774,9 @@ static const struct usb_device_id option
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
author maintainer
#3 lore raw

PATCH 3/108 USB: option: make interface blacklist work again

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 963940cf472d76eca2d36296e461202cc6997352 upstream.

commit 0d905fd "USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist" accidentally ANDed two blacklist tests by leaving out a return. This was not noticed because the two consecutive bracketless if statements made it syntactically correct.

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/option.c +1 -0
@@ -1373,6 +1373,7 @@ static int option_probe(struct usb_seria
 		serial->interface->cur_altsetting->desc.bInterfaceNumber,
 		OPTION_BLACKLIST_RESERVED_IF,
 		(const struct option_blacklist_info *) id->driver_info))
+		return -ENODEV;
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&
author maintainer
#4 lore raw

PATCH 4/108 USB: option: add ZTE MF820D

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 5889d3d4209c1050b4a3c96c41faf6c0976a4acf upstream.

This device presents a total of 5 interfaces with ff/ff/ff class/subclass/protocol. The last one of these is verified to be a QMI/wwan combined interface which should be handled by the qmi_wwan driver, so we blacklist it here.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -901,6 +901,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
author maintainer
#5 lore raw

PATCH 5/108 USB: ftdi_sio: fix problem when the manufacture is a NULL string

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

commit 656d2b3964a9d0f9864d472f8dfa2dd7dd42e6c0 upstream.

On some misconfigured ftdi_sio devices, if the manufacturer string is NULL, the kernel will oops when the device is plugged in. This patch fixes the problem.

---
 drivers/usb/serial/ftdi_sio.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/serial/ftdi_sio.c +2 -1
@@ -1755,7 +1755,8 @@ static int ftdi_8u2232c_probe(struct usb
 
 	dbg("%s", __func__);
 
-	if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+	if ((udev->manufacturer) &&
+	    (strcmp(udev->manufacturer, "CALAO Systems") == 0))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
author maintainer
#6 lore raw

PATCH 6/108 USB: ftdi_sio: add support for BeagleBone rev A5+

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <[email protected]>

commit 444aa7fa9bd752d19ce472d3e02558b987c3cc67 upstream.

BeagleBone changed to the default FTDI 0403:6010 id in rev A5 to make life easier for Windows users, so we need a similar workaround as the Calao board to support it.

---
 drivers/usb/serial/ftdi_sio.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/serial/ftdi_sio.c +2 -2
@@ -1755,8 +1755,8 @@ static int ftdi_8u2232c_probe(struct usb
 
 	dbg("%s", __func__);
 
-	if ((udev->manufacturer) &&
-	    (strcmp(udev->manufacturer, "CALAO Systems") == 0))
+	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
author maintainer
#7 lore raw

PATCH 7/108 USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bruno Thomsen <[email protected]>

commit c1cee1d84001815a1b4321c49b995254c0df3100 upstream.

Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs.

A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways).

Most likely the Hornby based their design on
PIC18F87J50 Full Speed USB Demo Board.

---
 drivers/usb/serial/ftdi_sio.c     |    2 +-
 drivers/usb/serial/ftdi_sio_ids.h |   10 +++++++---
 2 files changed, 8 insertions(+), 4 deletions(-)
drivers/usb/serial/ftdi_sio.c +1 -1
@@ -796,7 +796,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
+	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
drivers/usb/serial/ftdi_sio_ids.h +7 -3
@@ -532,10 +532,14 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
- * Hornby Elite
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
  */
-#define HORNBY_VID		0x04D8
-#define HORNBY_ELITE_PID	0x000A
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
 
 /*
  * RATOC REX-USB60F
author maintainer
#8 lore raw

PATCH 8/108 USB: ftdi_sio: new PID: Distortec JTAG-lock-pick

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michał Wróbel <[email protected]>

commit 47594d5528f28a4c025c2955c68104c75815637c upstream.

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    2 ++
 2 files changed, 4 insertions(+)
drivers/usb/serial/ftdi_sio.c +2 -0
@@ -845,6 +845,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
drivers/usb/serial/ftdi_sio_ids.h +2 -0
@@ -97,6 +97,8 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
author maintainer
#9 lore raw

PATCH 9/108 USB: ftdi_sio: add support for FT-X series devices

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jim Paris <[email protected]>

commit dc0827c128c0ee5a58b822b99d662b59f4b8e970 upstream.

Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices.

Tested with a FT201X and FT230X at various baudrates (100 - 3000000).

Sample dmesg:
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
usb 2-1: new full-speed USB device number 6 using ohci_hcd
usb 2-1: New USB device found, idVendor=0403, idProduct=6015
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: FT230X USB Half UART
usb 2-1: Manufacturer: FTDI
usb 2-1: SerialNumber: DC001WI6
ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X
usb 2-1: Number of endpoints 2
usb 2-1: Endpoint 1 MaxPacketSize 64
usb 2-1: Endpoint 2 MaxPacketSize 64
usb 2-1: Setting MaxPacketSize 64
drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X
usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0

---
 drivers/usb/serial/ftdi_sio.c     |   20 +++++++++++++++-----
 drivers/usb/serial/ftdi_sio.h     |    3 ++-
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 3 files changed, 18 insertions(+), 6 deletions(-)
drivers/usb/serial/ftdi_sio.c +15 -5
@@ -187,6 +187,7 @@ static struct usb_device_id id_table_com
 		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -869,7 +870,8 @@ static const char *ftdi_chip_name[] = {
 	[FT232RL] = "FT232RL",
 	[FT2232H] = "FT2232H",
 	[FT4232H] = "FT4232H",
-	[FT232H]  = "FT232H"
+	[FT232H]  = "FT232H",
+	[FTX]     = "FT-X"
 };
 
 
@@ -1167,7 +1169,8 @@ static __u32 get_ftdi_divisor(struct tty
 		break;
 	case FT232BM: /* FT232BM chip */
 	case FT2232C: /* FT2232C chip */
-	case FT232RL:
+	case FT232RL: /* FT232RL chip */
+	case FTX:     /* FT-X series */
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
@@ -1453,10 +1456,14 @@ static void ftdi_determine_type(struct u
 	} else if (version < 0x900) {
 		/* Assume it's an FT232RL */
 		priv->chip_type = FT232RL;
-	} else {
+	} else if (version < 0x1000) {
 		/* Assume it's an FT232H */
 		priv->chip_type = FT232H;
+	} else {
+		/* Assume it's an FT-X series device */
+		priv->chip_type = FTX;
 	}
+
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 
@@ -1584,7 +1591,8 @@ static int create_sysfs_attrs(struct usb
 		     priv->chip_type == FT232RL ||
 		     priv->chip_type == FT2232H ||
 		     priv->chip_type == FT4232H ||
-		     priv->chip_type == FT232H)) {
+		     priv->chip_type == FT232H ||
+		     priv->chip_type == FTX)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}
@@ -1606,7 +1614,8 @@ static void remove_sysfs_attrs(struct us
 		    priv->chip_type == FT232RL ||
 		    priv->chip_type == FT2232H ||
 		    priv->chip_type == FT4232H ||
-                    priv->chip_type == FT232H) {
+		    priv->chip_type == FT232H ||
+		    priv->chip_type == FTX) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -2263,6 +2272,7 @@ static int ftdi_tiocmget(struct tty_stru
 	case FT2232H:
 	case FT4232H:
 	case FT232H:
+	case FTX:
 		len = 2;
 		break;
 	default:
drivers/usb/serial/ftdi_sio.h +2 -1
@@ -157,7 +157,8 @@ enum ftdi_chip_type {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7,
-	FT232H  = 8
+	FT232H  = 8,
+	FTX     = 9,
 };
 
 enum ftdi_sio_baudrate {
drivers/usb/serial/ftdi_sio_ids.h +1 -0
@@ -23,6 +23,7 @@
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
 #define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
 #define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
author maintainer
#10 lore raw

PATCH 10/108 USB: ftdi_sio: new PID: LUMEL PD12

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michał Wróbel <[email protected]>

commit 57e596f3af88ef52dea9640ed5e34ecd38893a02 upstream.

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    2 ++
 2 files changed, 3 insertions(+)
drivers/usb/serial/ftdi_sio.c +1 -0
@@ -848,6 +848,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
drivers/usb/serial/ftdi_sio_ids.h +2 -0
@@ -30,6 +30,8 @@
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+#define FTDI_LUMEL_PD12_PID	0x6002
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
author maintainer
#11 lore raw

PATCH 11/108 powerpc/usb: fix bug of kernel hang when initializing usb

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengzhou Liu <[email protected]>

commit 28c56ea1431421dec51b7b229369e991481453df upstream.

If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up.

---
 drivers/usb/host/ehci-fsl.c |    4 ++++
 drivers/usb/host/ehci-fsl.h |    1 +
 2 files changed, 5 insertions(+)
drivers/usb/host/ehci-fsl.c +4 -0
@@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct eh
 			       unsigned int port_offset)
 {
 	u32 portsc;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	void __iomem *non_ehci = hcd->regs;
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct eh
 		portsc |= PORT_PTS_PTW;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		/* enable UTMI PHY */
+		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
 		portsc |= PORT_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_NONE:
drivers/usb/host/ehci-fsl.h +1 -0
@@ -45,5 +45,6 @@
 #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+#define CTRL_UTMI_PHY_EN	(1<<9)
 #define SNOOP_SIZE_2GB		0x1e
 #endif				/* _EHCI_FSL_H */
#12 lore raw

Re: [ 011/108] powerpc/usb: fix bug of kernel hang when initializing usb

Quoted 10 lines · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengzhou Liu <[email protected]>

commit 28c56ea1431421dec51b7b229369e991481453df upstream.

If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up.

I apologize for the late response, but I was encountering this same hang (on an 8315) and applied this patch. (For what it's worth, I'm only seeing it after many warm boots; a cold boot / hard power cycle solves the issue, but since this is eventually going to be locked up in a box without a console...)

I encountered the hang again this evening, so this fix (plus the snoop fix) is not sufficientl

Reading through the original thread, it seems that an additional delay might be required:

http://article.gmane.org/gmane.linux.usb.general/58795

Quoted 4 lines

First, the SDK kernel had a delay after setting that bit, I added that back in. This is not what fixed it but it looks like the right thing to do, though please, use msleep rather than udelay here if possible (not in atomic context).

However, I never saw a patch to that effect. I'm assuming (hoping!) it's something as simple as:

------------------------------------------------------------------------

drivers/usb/host/ehci-fsl.c +0 -0
index 09fd214..d58c1c6 100644
@@ -236,6 +236,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
	case FSL_USB2_PHY_UTMI:
		/* enable UTMI PHY */
		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
+		msleep(5);
		portsc |= PORT_PTS_UTMI;
		break;
	case FSL_USB2_PHY_NONE:

------------------------------------------------------------------------

But confirmation would be nice. Also, which SDK kernel was this compared against? I just downloaded the 8315ERDB BSP, and the kernel there doesn't seem to have any of this in it.

There was also the follow-on patch that enabled snooping (to deal with cache coherency?):

http://article.gmane.org/gmane.linux.usb.general/58798

(If there was a formal patch there, it looks like it got scrambled on gmane, and I can't find another list archive.)

Is that also needed for consistent results here? (Or are we wandering astray from "-stable" material?)

Thanks,
Tony.

author maintainer
#13 lore raw

Re: [ 011/108] powerpc/usb: fix bug of kernel hang when initializing usb

Quoted 57 lines · Anthony Foiani
Quoted 10 lines · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengzhou Liu <[email protected]>

commit 28c56ea1431421dec51b7b229369e991481453df upstream.

If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up.

I apologize for the late response, but I was encountering this same hang (on an 8315) and applied this patch. (For what it's worth, I'm only seeing it after many warm boots; a cold boot / hard power cycle solves the issue, but since this is eventually going to be locked up in a box without a console...)

I encountered the hang again this evening, so this fix (plus the snoop fix) is not sufficientl

Reading through the original thread, it seems that an additional delay might be required:

http://article.gmane.org/gmane.linux.usb.general/58795

Quoted 4 lines

First, the SDK kernel had a delay after setting that bit, I added that back in. This is not what fixed it but it looks like the right thing to do, though please, use msleep rather than udelay here if possible (not in atomic context).

However, I never saw a patch to that effect. I'm assuming (hoping!) it's something as simple as:

------------------------------------------------------------------------

drivers/usb/host/ehci-fsl.c +1 -1
index 09fd214..d58c1c6 100644
@@ -236,6 +236,7 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 	case FSL_USB2_PHY_UTMI:
 		/* enable UTMI PHY */
 		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
+		msleep(5);
 		portsc |= PORT_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_NONE:
------------------------------------------------------------------------

But confirmation would be nice. Also, which SDK kernel was this compared against? I just downloaded the 8315ERDB BSP, and the kernel there doesn't seem to have any of this in it.

There was also the follow-on patch that enabled snooping (to deal with cache coherency?):

Quoted 7 lines
   http://article.gmane.org/gmane.linux.usb.general/58798

(If there was a formal patch there, it looks like it got scrambled on gmane, and I can't find another list archive.)

Is that also needed for consistent results here? (Or are we wandering astray from "-stable" material?)

Yes you are, any patch for the stable tree needs to be in Linus's tree already. Please work with the original developers of this patch to resolve the issue, get the patch merged, and then I can take it for a stable release.

thanks,

greg k-h

author maintainer
#14 lore raw

PATCH 12/108 usb: musb: Reselect index reg in interrupt context

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Supriya Karanth <[email protected]>

commit 39287076e46d2c19aaceaa6f0a44168ae4d257ec upstream.

musb INDEX register is getting modified/corrupted during temporary un-locking in a SMP system. Set this register with proper value after re-acquiring the lock

Scenario:
---------
CPU1 is handling a data transfer completion interrupt received for the CLASS1 EP
CPU2 is handling a CLASS2 thread which is queuing data to musb for transfer

Below is the error sequence:

CPU1 | CPU2
--------------------------------------------------------------------

Data transfer completion inter- |
rupt recieved.                  |
                                |
musb INDEX reg set to CLASS1 EP |
                                |
musb LOCK is acquired.          |
                                |
                                | CLASS2 thread queues data.
                                |
                                | CLASS2 thread tries to acquire musb
                                | LOCK but lock is already taken by
                                | CLASS1, so CLASS2 thread is
                                | spinning.
                                |
Quoted 1 line
Quoted 1 line

From Interrupt Context musb |

giveback function is called     |
                                |
The giveback function releases  | CLASS2 thread now acquires LOCK
LOCK                            |
                                |
ClASS1 Request's completion cal-| ClASS2 schedules the data transfer and
lback is called                 | sets the MUSB INDEX to Class2 EP number
                                |
Interrupt handler for CLASS1 EP |
tries to acquire LOCK and is    |
spinning                        |
                                |
Interrupt for Class1 EP acquires| Class2 completes the scheduling etc and
the MUSB LOCK                   | releases the musb LOCK
                                |
Interrupt for Class1 EP schedul-|
es the next data transfer       |
but musb INDEX register is still|
set to CLASS2 EP                |

Since the MUSB INDEX register is set to a different endpoint, we read and modify the wrong registers. Hence data transfer will not happen properly. This results in unpredictable behavior

So, the MUSB INDEX register is set to proper value again when interrupt re-acquires the lock

---
 drivers/usb/musb/musb_gadget.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/usb/musb/musb_gadget.c +18 -0
@@ -576,6 +576,15 @@ void musb_g_tx(struct musb *musb, u8 epn
 
 		if (request->actual == request->length) {
 			musb_g_giveback(musb_ep, request, 0);
+			/*
+			 * In the giveback function the MUSB lock is
+			 * released and acquired after sometime. During
+			 * this time period the INDEX register could get
+			 * changed by the gadget_queue function especially
+			 * on SMP systems. Reselect the INDEX to be sure
+			 * we are reading/modifying the right registers
+			 */
+			musb_ep_select(mbase, epnum);
 			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!req) {
 				dev_dbg(musb->controller, "%s idle now\n",
@@ -968,6 +977,15 @@ void musb_g_rx(struct musb *musb, u8 epn
 		}
 #endif
 		musb_g_giveback(musb_ep, request, 0);
+		/*
+		 * In the giveback function the MUSB lock is
+		 * released and acquired after sometime. During
+		 * this time period the INDEX register could get
+		 * changed by the gadget_queue function especially
+		 * on SMP systems. Reselect the INDEX to be sure
+		 * we are reading/modifying the right registers
+		 */
+		musb_ep_select(mbase, epnum);
 
 		req = next_request(musb_ep);
 		if (!req)
author maintainer
#15 lore raw

PATCH 13/108 usb: gadgetfs: return number of bytes on ep0 read request

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Faber <[email protected]>

commit 85b4b3c8c189e0159101f7628a71411af072ff69 upstream.

A read from GadgetFS endpoint 0 during the data stage of a control request would always return 0 on success (as returned by wait_event_interruptible) despite having written data into the user buffer.
This patch makes it correctly set the return value to the number of bytes read.

---
 drivers/usb/gadget/inode.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/gadget/inode.c +2 -0
@@ -1050,6 +1050,8 @@ ep0_read (struct file *fd, char __user *
 // FIXME don't call this with the spinlock held ...
 				if (copy_to_user (buf, dev->req->buf, len))
 					retval = -EFAULT;
+				else
+					retval = len;
 				clean_req (dev->gadget->ep0, dev->req);
 				/* NOTE userspace can't yet choose to stall */
 			}
author maintainer
#16 lore raw

PATCH 14/108 USB: gadget: Make g_hid device class conform to spec.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Orjan Friberg <[email protected]>

commit 33d2832ab0149a26418d360af3c444969a63fb28 upstream.

HID devices should specify this in their interface descriptors, not in the device descriptor. This fixes a "missing hardware id" bug under Windows 7 with a VIA VL800 (3.0) controller.

---
 drivers/usb/gadget/hid.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/usb/gadget/hid.c +3 -3
@@ -69,9 +69,9 @@ static struct usb_device_descriptor devi
 	/* .bDeviceClass =		USB_CLASS_COMM, */
 	/* .bDeviceSubClass =	0, */
 	/* .bDeviceProtocol =	0, */
-	.bDeviceClass =		0xEF,
-	.bDeviceSubClass =	2,
-	.bDeviceProtocol =	1,
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
 	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */
author maintainer
#17 lore raw

PATCH 15/108 futex: Cover all PI opcodes with cmpxchg enabled check

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <[email protected]>

commit 59263b513c11398cd66a52d4c5b2b118ce1e0359 upstream.

Some of the newer futex PI opcodes do not check the cmpxchg enabled variable and call unconditionally into the handling functions. Cover all PI opcodes in a separate check.

---
 kernel/futex.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
kernel/futex.c +13 -6
@@ -2641,6 +2641,16 @@ long do_futex(u32 __user *uaddr, int op,
 	}
 
 	switch (cmd) {
+	case FUTEX_LOCK_PI:
+	case FUTEX_UNLOCK_PI:
+	case FUTEX_TRYLOCK_PI:
+	case FUTEX_WAIT_REQUEUE_PI:
+	case FUTEX_CMP_REQUEUE_PI:
+		if (!futex_cmpxchg_enabled)
+			return -ENOSYS;
+	}
+
+	switch (cmd) {
 	case FUTEX_WAIT:
 		val3 = FUTEX_BITSET_MATCH_ANY;
 	case FUTEX_WAIT_BITSET:
@@ -2661,16 +2671,13 @@ long do_futex(u32 __user *uaddr, int op,
 		ret = futex_wake_op(uaddr, flags, uaddr2, val, val2, val3);
 		break;
 	case FUTEX_LOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, flags, val, timeout, 0);
+		ret = futex_lock_pi(uaddr, flags, val, timeout, 0);
 		break;
 	case FUTEX_UNLOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_unlock_pi(uaddr, flags);
+		ret = futex_unlock_pi(uaddr, flags);
 		break;
 	case FUTEX_TRYLOCK_PI:
-		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, flags, 0, timeout, 1);
+		ret = futex_lock_pi(uaddr, flags, 0, timeout, 1);
 		break;
 	case FUTEX_WAIT_REQUEUE_PI:
 		val3 = FUTEX_BITSET_MATCH_ANY;
author maintainer
#18 lore raw

PATCH 16/108 sysfs: Fix memory leak in sysfs_sd_setsecdata().

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masami Ichikawa <[email protected]>

commit 93518dd2ebafcc761a8637b2877008cfd748c202 upstream.

This patch fixies follwing two memory leak patterns that reported by kmemleak. sysfs_sd_setsecdata() is called during sys_lsetxattr() operation. It checks sd->s_iattr is NULL or not. Then if it is NULL, it calls sysfs_init_inode_attrs() to allocate memory.
That code is this.

iattrs = sd->s_iattr;
if (!iattrs)

                iattrs = sysfs_init_inode_attrs(sd);

The iattrs recieves sysfs_init_inode_attrs()'s result, but sd->s_iattr doesn't know the address. so it needs to set correct address to sd->s_iattr to free memory in other function.

unreferenced object 0xffff880250b73e60 (size 32):
comm "systemd", pid 1, jiffies 4294683888 (age 94.553s) hex dump (first 32 bytes):

    73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f  system_u:object_
    72 3a 73 79 73 66 73 5f 74 3a 73 30 00 00 00 00  r:sysfs_t:s0....
  backtrace:
    [<ffffffff814cb1d0>] kmemleak_alloc+0x73/0x98
    [<ffffffff811270ab>] __kmalloc+0x100/0x12c
    [<ffffffff8120775a>] context_struct_to_string+0x106/0x210
    [<ffffffff81207cc1>] security_sid_to_context_core+0x10b/0x129
    [<ffffffff812090ef>] security_sid_to_context+0x10/0x12
    [<ffffffff811fb0da>] selinux_inode_getsecurity+0x7d/0xa8
    [<ffffffff811fb127>] selinux_inode_getsecctx+0x22/0x2e
    [<ffffffff811f4d62>] security_inode_getsecctx+0x16/0x18
    [<ffffffff81191dad>] sysfs_setxattr+0x96/0x117
    [<ffffffff811542f0>] __vfs_setxattr_noperm+0x73/0xd9
    [<ffffffff811543d9>] vfs_setxattr+0x83/0xa1
    [<ffffffff811544c6>] setxattr+0xcf/0x101
    [<ffffffff81154745>] sys_lsetxattr+0x6a/0x8f
    [<ffffffff814efda9>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff88024163c5a0 (size 96):
  comm "systemd", pid 1, jiffies 4294683888 (age 94.553s)
  hex dump (first 32 bytes):
    00 00 00 00 ed 41 00 00 00 00 00 00 00 00 00 00  .....A..........
    00 00 00 00 00 00 00 00 0c 64 42 4f 00 00 00 00  .........dBO....
  backtrace:
    [<ffffffff814cb1d0>] kmemleak_alloc+0x73/0x98
    [<ffffffff81127402>] kmem_cache_alloc_trace+0xc4/0xee
    [<ffffffff81191cbe>] sysfs_init_inode_attrs+0x2a/0x83
    [<ffffffff81191dd6>] sysfs_setxattr+0xbf/0x117
    [<ffffffff811542f0>] __vfs_setxattr_noperm+0x73/0xd9
    [<ffffffff811543d9>] vfs_setxattr+0x83/0xa1
    [<ffffffff811544c6>] setxattr+0xcf/0x101
    [<ffffffff81154745>] sys_lsetxattr+0x6a/0x8f
    [<ffffffff814efda9>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

`

---
 fs/sysfs/inode.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
fs/sysfs/inode.c +6 -5
@@ -136,12 +136,13 @@ static int sysfs_sd_setsecdata(struct sy
 	void *old_secdata;
 	size_t old_secdata_len;
 
-	iattrs = sd->s_iattr;
-	if (!iattrs)
-		iattrs = sysfs_init_inode_attrs(sd);
-	if (!iattrs)
-		return -ENOMEM;
+	if (!sd->s_iattr) {
+		sd->s_iattr = sysfs_init_inode_attrs(sd);
+		if (!sd->s_iattr)
+			return -ENOMEM;
+	}
 
+	iattrs = sd->s_iattr;
 	old_secdata = iattrs->ia_secdata;
 	old_secdata_len = iattrs->ia_secdata_len;
 
author maintainer
#19 lore raw

PATCH 17/108 tty: moxa: fix bit test in moxa_start()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 58112dfbfe02d803566a2c6c8bd97b5fa3c62cdc upstream.

This is supposed to be doing a shift before the comparison instead of just doing a bitwise AND directly. The current code means the start() just returns without doing anything.

---
 drivers/tty/moxa.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/moxa.c +1 -1
@@ -1330,7 +1330,7 @@ static void moxa_start(struct tty_struct
 	if (ch == NULL)
 		return;
 
-	if (!(ch->statusflags & TXSTOPPED))
+	if (!test_bit(TXSTOPPED, &ch->statusflags))
 		return;
 
 	MoxaPortTxEnable(ch);
author maintainer
#20 lore raw

PATCH 18/108 TTY: Wrong unicode value copied in con_set_unimap()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liz Clark <[email protected]>

commit 4a4c61b7ce26bfc9d49ea4bd121d52114bad9f99 upstream.

Bugzilla 40012: PIO_UNIMAP bug: error updating Unicode-to-font map
https://bugzilla.kernel.org/show_bug.cgi?id=40012

The unicode font map for the virtual console is a 32x32x64 table which allocates rows dynamically as entries are added. The unicode value increases sequentially and should count all entries even in empty rows. The defect is when copying the unicode font map in con_set_unimap(), the unicode value is not incremented properly. The wrong unicode value is entered in the new font map.

---
 drivers/tty/vt/consolemap.c |   51 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 43 insertions(+), 8 deletions(-)
drivers/tty/vt/consolemap.c +43 -8
@@ -516,6 +516,7 @@ int con_set_unimap(struct vc_data *vc, u
 	int err = 0, err1, i;
 	struct uni_pagedir *p, *q;
 
+	/* Save original vc_unipagdir_loc in case we allocate a new one */
 	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
 	if (p->readonly) return -EIO;
 	
@@ -528,26 +529,57 @@ int con_set_unimap(struct vc_data *vc, u
 		err1 = con_clear_unimap(vc, NULL);
 		if (err1) return err1;
 		
+		/*
+		 * Since refcount was > 1, con_clear_unimap() allocated a
+		 * a new uni_pagedir for this vc.  Re: p != q
+		 */
 		q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-		for (i = 0, l = 0; i < 32; i++)
+
+		/*
+		 * uni_pgdir is a 32*32*64 table with rows allocated
+		 * when its first entry is added.  The unicode value must
+		 * still be incremented for empty rows.  We are copying
+		 * entries from "p" (old) to "q" (new).
+		 */
+		l = 0;		/* unicode value */
+		for (i = 0; i < 32; i++)
 		if ((p1 = p->uni_pgdir[i]))
 			for (j = 0; j < 32; j++)
-			if ((p2 = p1[j]))
+			if ((p2 = p1[j])) {
 				for (k = 0; k < 64; k++, l++)
 				if (p2[k] != 0xffff) {
+					/*
+					 * Found one, copy entry for unicode
+					 * l with fontpos value p2[k].
+					 */
 					err1 = con_insert_unipair(q, l, p2[k]);
 					if (err1) {
 						p->refcount++;
 						*vc->vc_uni_pagedir_loc = (unsigned long)p;
 						con_release_unimap(q);
 						kfree(q);
-						return err1; 
+						return err1;
 					}
-              			}
-              	p = q;
-	} else if (p == dflt)
+				}
+			} else {
+				/* Account for row of 64 empty entries */
+				l += 64;
+			}
+		else
+			/* Account for empty table */
+			l += 32 * 64;
+
+		/*
+		 * Finished copying font table, set vc_uni_pagedir to new table
+		 */
+		p = q;
+	} else if (p == dflt) {
 		dflt = NULL;
-	
+	}
+
+	/*
+	 * Insert user specified unicode pairs into new table.
+	 */
 	while (ct--) {
 		unsigned short unicode, fontpos;
 		__get_user(unicode, &list->unicode);
@@ -557,11 +589,14 @@ int con_set_unimap(struct vc_data *vc, u
 		list++;
 	}
 	
+	/*
+	 * Merge with fontmaps of any other virtual consoles.
+	 */
 	if (con_unify_unimap(vc, p))
 		return err;
 
 	for (i = 0; i <= 3; i++)
-		set_inverse_transl(vc, p, i); /* Update all inverse translations */
+		set_inverse_transl(vc, p, i); /* Update inverse translations */
 	set_inverse_trans_unicode(vc, p);
   
 	return err;
author maintainer
#21 lore raw

PATCH 19/108 USB: serial: fix console error reporting

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold <[email protected]>

commit 548dd4b6da8a8e428453d55f7fa7b8a46498d147 upstream.

Do not report errors in write path if port is used as a console as this may trigger the same error (and error report) resulting in a loop.

---
 drivers/usb/serial/generic.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/serial/generic.c +3 -1
@@ -215,8 +215,10 @@ retry:
 	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
+		if (!port->port.console) {
+			dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
+		}
 		set_bit(i, &port->write_urbs_free);
 		spin_lock_irqsave(&port->lock, flags);
 		port->tx_bytes -= count;
author maintainer
#22 lore raw

PATCH 20/108 cdc-wdm: Fix more races on the read path

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

commit 711c68b3c0f7a924ffbee4aa962d8f62b85188ff upstream.

We must not allow the input buffer length to change while we're shuffling the buffer contents. We also mustn't clear the WDM_READ flag after more data might have arrived. Therefore move both of these into the spinlocked region at the bottom of wdm_read().

When reading desc->length without holding the iuspin lock, use ACCESS_ONCE() to ensure the compiler doesn't re-read it with inconsistent results.

---
 drivers/usb/class/cdc-wdm.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/usb/class/cdc-wdm.c +11 -5
@@ -397,7 +397,7 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr = 0;
+	int rv, cntr;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 
@@ -406,7 +406,8 @@ static ssize_t wdm_read
 	if (rv < 0)
 		return -ERESTARTSYS;
 
-	if (desc->length == 0) {
+	cntr = ACCESS_ONCE(desc->length);
+	if (cntr == 0) {
 		desc->read = 0;
 retry:
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
@@ -457,25 +458,30 @@ retry:
 			goto retry;
 		}
 		clear_bit(WDM_READ, &desc->flags);
+		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}
 
-	cntr = count > desc->length ? desc->length : count;
+	if (cntr > count)
+		cntr = count;
 	rv = copy_to_user(buffer, desc->ubuf, cntr);
 	if (rv > 0) {
 		rv = -EFAULT;
 		goto err;
 	}
 
+	spin_lock_irq(&desc->iuspin);
+
 	for (i = 0; i < desc->length - cntr; i++)
 		desc->ubuf[i] = desc->ubuf[i + cntr];
 
-	spin_lock_irq(&desc->iuspin);
 	desc->length -= cntr;
-	spin_unlock_irq(&desc->iuspin);
 	/* in case we had outstanding data */
 	if (!desc->length)
 		clear_bit(WDM_READ, &desc->flags);
+
+	spin_unlock_irq(&desc->iuspin);
+
 	rv = cntr;
 
 err:
author maintainer
#23 lore raw

PATCH 21/108 cdc-wdm: Dont clear WDM_READ unless entire read buffer is emptied

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <[email protected]>

commit b7a205545345578712611106b371538992e142ff upstream.

The WDM_READ flag is cleared later iff desc->length is reduced to 0.

---
 drivers/usb/class/cdc-wdm.c |    1 -
 1 file changed, 1 deletion(-)
drivers/usb/class/cdc-wdm.c +0 -1
@@ -457,7 +457,6 @@ retry:
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
-		clear_bit(WDM_READ, &desc->flags);
 		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}
author maintainer
#24 lore raw

PATCH 22/108 usb: fsl_udc_core: Fix scheduling while atomic dump message

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Chen <[email protected]>

commit c5cc5ed86667d4ae74fe40ee4ed893f4b46aba05 upstream.

When loading g_ether gadget, there is below message:

Backtrace:
[<80012248>] (dump_backtrace+0x0/0x10c) from [<803cb42c>] (dump_stack+0x18/0x1c)
r7:00000000 r6:80512000 r5:8052bef8 r4:80513f30
[<803cb414>] (dump_stack+0x0/0x1c) from [<8000feb4>] (show_regs+0x44/0x50)
[<8000fe70>] (show_regs+0x0/0x50) from [<8004c840>] (__schedule_bug+0x68/0x84)
r5:8052bef8 r4:80513f30
[<8004c7d8>] (__schedule_bug+0x0/0x84) from [<803cd0e4>] (__schedule+0x4b0/0x528)
r5:8052bef8 r4:809aad00
[<803ccc34>] (__schedule+0x0/0x528) from [<803cd214>] (_cond_resched+0x44/0x58)
[<803cd1d0>] (_cond_resched+0x0/0x58) from [<800a9488>] (dma_pool_alloc+0x184/0x250)
 r5:9f9b4000 r4:9fb4fb80
 [<800a9304>] (dma_pool_alloc+0x0/0x250) from [<802a8ad8>] (fsl_req_to_dtd+0xac/0x180)
[<802a8a2c>] (fsl_req_to_dtd+0x0/0x180) from [<802a8ce4>] (fsl_ep_queue+0x138/0x274)
[<802a8bac>] (fsl_ep_queue+0x0/0x274) from [<7f004328>] (composite_setup+0x2d4/0xfac [g_ether])
[<7f004054>] (composite_setup+0x0/0xfac [g_ether]) from [<802a9bb4>] (fsl_udc_irq+0x8dc/0xd38)
[<802a92d8>] (fsl_udc_irq+0x0/0xd38) from [<800704f8>] (handle_irq_event_percpu+0x54/0x188)
[<800704a4>] (handle_irq_event_percpu+0x0/0x188) from [<80070674>] (handle_irq_event+0x48/0x68)
[<8007062c>] (handle_irq_event+0x0/0x68) from [<800738ec>] (handle_level_irq+0xb4/0x138)
 r5:80514f94 r4:80514f40
 [<80073838>] (handle_level_irq+0x0/0x138) from [<8006ffa4>] (generic_handle_irq+0x38/0x44)
 r7:00000012 r6:80510b1c r5:80529860 r4:80512000
 [<8006ff6c>] (generic_handle_irq+0x0/0x44) from [<8000f4c4>] (handle_IRQ+0x54/0xb4)
[<8000f470>] (handle_IRQ+0x0/0xb4) from [<800085b8>] (tzic_handle_irq+0x64/0x94)
 r9:412fc085 r8:00000000 r7:80513f30 r6:00000001 r5:00000000
 r4:00000000
 [<80008554>] (tzic_handle_irq+0x0/0x94) from [<8000e680>] (__irq_svc+0x40/0x60)

The reason of above dump message is calling dma_poll_alloc with can-schedule mem_flags at atomic context.

To fix this problem, below changes are made:
- fsl_req_to_dtd doesn't need to be protected by spin_lock_irqsave, as struct usb_request can be access at process context. Move lock to beginning of hardware visit (fsl_queue_td).
- Change the memory flag which using to allocate dTD descriptor buffer, the memory flag can be from gadget layer.

It is tested at i.mx51 bbg board with g_mass_storage, g_ether, g_serial.

---
 drivers/usb/gadget/fsl_udc_core.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)
drivers/usb/gadget/fsl_udc_core.c +8 -10
@@ -767,7 +767,7 @@ out:
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-		dma_addr_t *dma, int *is_last)
+		dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
 {
 	u32 swap_temp;
 	struct ep_td_struct *dtd;
@@ -776,7 +776,7 @@ static struct ep_td_struct *fsl_build_dt
 	*length = min(req->req.length - req->req.actual,
 			(unsigned)EP_MAX_LENGTH_TRANSFER);
 
-	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
 	if (dtd == NULL)
 		return dtd;
 
@@ -826,7 +826,7 @@ static struct ep_td_struct *fsl_build_dt
 }
 
 /* Generate dtd chain for a request */
-static int fsl_req_to_dtd(struct fsl_req *req)
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
 {
 	unsigned	count;
 	int		is_last;
@@ -835,7 +835,7 @@ static int fsl_req_to_dtd(struct fsl_req
 	dma_addr_t dma;
 
 	do {
-		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+		dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
 		if (dtd == NULL)
 			return -ENOMEM;
 
@@ -909,13 +909,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct
 	req->req.actual = 0;
 	req->dtd_count = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-
 	/* build dtds and push them to device queue */
-	if (!fsl_req_to_dtd(req)) {
+	if (!fsl_req_to_dtd(req, gfp_flags)) {
+		spin_lock_irqsave(&udc->lock, flags);
 		fsl_queue_td(ep, req);
 	} else {
-		spin_unlock_irqrestore(&udc->lock, flags);
 		return -ENOMEM;
 	}
 
@@ -1294,7 +1292,7 @@ static int ep0_prime_status(struct fsl_u
 			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	req->mapped = 1;
 
-	if (fsl_req_to_dtd(req) == 0)
+	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
 		fsl_queue_td(ep, req);
 	else
 		return -ENOMEM;
@@ -1378,7 +1376,7 @@ static void ch9getstatus(struct fsl_udc
 	req->mapped = 1;
 
 	/* prime the data phase */
-	if ((fsl_req_to_dtd(req) == 0))
+	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
 		fsl_queue_td(ep, req);
 	else			/* no mem */
 		goto stall;
author maintainer
#25 lore raw

PATCH 23/108 usb: Fix build error due to dma_mask is not at pdev_archdata at ARM

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Chen <[email protected]>

commit e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream.

When build i.mx platform with imx_v6_v7_defconfig, and after adding USB Gadget support, it has below build error:

CC drivers/usb/host/fsl-mph-dr-of.o
drivers/usb/host/fsl-mph-dr-of.c: In function 'fsl_usb2_device_register':
drivers/usb/host/fsl-mph-dr-of.c:97: error: 'struct pdev_archdata' has no member named 'dma_mask'

It has discussed at: http://www.spinics.net/lists/linux-usb/msg57302.html

For PowerPC, there is dma_mask at struct pdev_archdata, but there is no dma_mask at struct pdev_archdata for ARM. The pdev_archdata is related to specific platform, it should NOT be accessed by cross platform drivers, like USB.

The code for pdev_archdata should be useless, as for PowerPC, it has already gotten the value for pdev->dev.dma_mask at function arch_setup_pdev_archdata of arch/powerpc/kernel/setup-common.c.

---
 drivers/usb/host/fsl-mph-dr-of.c |    1 -
 1 file changed, 1 deletion(-)
drivers/usb/host/fsl-mph-dr-of.c +0 -1
@@ -93,7 +93,6 @@ struct platform_device * __devinit fsl_u
 	pdev->dev.parent = &ofdev->dev;
 
 	pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
-	pdev->dev.dma_mask = &pdev->archdata.dma_mask;
 	*pdev->dev.dma_mask = *ofdev->dev.dma_mask;
 
 	retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
author maintainer
#26 lore raw

PATCH 24/108 USB: qcserial: add several new serial devices

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Tuttle <[email protected]>

commit 2db4d87070e87d198ab630e66a898b45eff316d9 upstream.

---
 drivers/usb/serial/qcserial.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/usb/serial/qcserial.c +14 -0
@@ -35,6 +35,11 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
 	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
 	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi QDL device */
 	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
 	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
 	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
@@ -85,7 +90,16 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+
+	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
+	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
+	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
+	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
+	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
author maintainer
#27 lore raw

PATCH 25/108 USB: qcserial: dont grab QMI port on Gobi 1000 devices

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams <[email protected]>

commit c192c8e71a2ded01170c1a992cd21aaedc822756 upstream.

Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond.

---
 drivers/usb/serial/qcserial.c |  105 ++++++++++++++++++++++++------------------
 1 file changed, 62 insertions(+), 43 deletions(-)
drivers/usb/serial/qcserial.c +62 -43
@@ -23,39 +23,44 @@
 
 static int debug;
 
+#define DEVICE_G1K(v, p) \
+	USB_DEVICE(v, p), .driver_info = 1
+
 static const struct usb_device_id id_table[] = {
-	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
-	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
-	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
-	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
-	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	/* Gobi 1000 devices */
+	{DEVICE_G1K(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{DEVICE_G1K(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{DEVICE_G1K(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{DEVICE_G1K(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+
+	/* Gobi 2000 devices */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
@@ -91,6 +96,8 @@ static const struct usb_device_id id_tab
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 
+	/* Gobi 3000 devices */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
 	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
@@ -121,8 +128,10 @@ static int qcprobe(struct usb_serial *se
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
+	bool is_gobi1k = id->driver_info ? true : false;
 
 	dbg("%s", __func__);
+	dbg("Is Gobi 1000 = %d", is_gobi1k);
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
@@ -170,15 +179,25 @@ static int qcprobe(struct usb_serial *se
 
 	case 3:
 	case 4:
-		/* Composite mode */
-		/* ifnum == 0 is a broadband network adapter */
-		if (ifnum == 1) {
-			/*
-			 * Diagnostics Monitor (serial line 9600 8N1)
-			 * Qualcomm DM protocol
-			 * use "libqcdm" (ModemManager) for communication
-			 */
-			dbg("Diagnostics Monitor found");
+		/* Composite mode; don't bind to the QMI/net interface as that
+		 * gets handled by other drivers.
+		 */
+
+		/* Gobi 1K USB layout:
+		 * 0: serial port (doesn't respond)
+		 * 1: serial port (doesn't respond)
+		 * 2: AT-capable modem port
+		 * 3: QMI/net
+		 *
+		 * Gobi 2K+ USB layout:
+		 * 0: QMI/net
+		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: AT-capable modem port
+		 * 3: NMEA
+		 */
+
+		if (ifnum == 1 && !is_gobi1k) {
+			dbg("Gobi 2K+ DM/DIAG interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
@@ -197,13 +216,13 @@ static int qcprobe(struct usb_serial *se
 				retval = -ENODEV;
 				kfree(data);
 			}
-		} else if (ifnum==3) {
+		} else if (ifnum==3 && !is_gobi1k) {
 			/*
 			 * NMEA (serial line 9600 8N1)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
-			dbg("NMEA GPS interface found");
+			dbg("Gobi 2K+ NMEA GPS interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
author maintainer
#28 lore raw

PATCH 26/108 usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS device

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Scott Dial <[email protected]>

commit 6d161b99f875269ad4ffa44375e1e54bca6fd02e upstream.

This patch adds new device IDs to the ftdi_sio module to support the new Sealevel SeaLINK+8 2038-ROHS device.

---
 drivers/usb/serial/ftdi_sio.c     |    4 ++++
 drivers/usb/serial/ftdi_sio_ids.h |    4 ++++
 2 files changed, 8 insertions(+)
drivers/usb/serial/ftdi_sio.c +4 -0
@@ -536,6 +536,10 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
drivers/usb/serial/ftdi_sio_ids.h +4 -0
@@ -689,6 +689,10 @@
 #define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
 #define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
 #define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
author maintainer
#29 lore raw

PATCH 27/108 usb: cp210x: Update to support CP2105 and multiple interface devices

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Preston Fick <[email protected]>

commit a5360a53a7ccad5ed9ccef210b94fef13c6e5529 upstream.

This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices.

Here are the changes included in this patch:
- Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices
- Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number
- Added a cp210x_release function to clean up the cp210x_port_private memory created on startup
- Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param

---
 drivers/usb/serial/cp210x.c |   44 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)
drivers/usb/serial/cp210x.c +41 -3
@@ -49,6 +49,7 @@ static int cp210x_tiocmset_port(struct u
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static int debug;
@@ -121,6 +122,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
@@ -149,6 +152,10 @@ static const struct usb_device_id id_tab
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+struct cp210x_port_private {
+	__u8			bInterfaceNumber;
+};
+
 static struct usb_driver cp210x_driver = {
 	.name		= "cp210x",
 	.probe		= usb_serial_probe,
@@ -174,6 +181,7 @@ static struct usb_serial_driver cp210x_d
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
+	.release		= cp210x_release,
 	.dtr_rts		= cp210x_dtr_rts
 };
 
@@ -261,6 +269,7 @@ static int cp210x_get_config(struct usb_
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -276,7 +285,7 @@ static int cp210x_get_config(struct usb_
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 
 	/* Convert data into an array of integers */
 	for (i = 0; i < length; i++)
@@ -304,6 +313,7 @@ static int cp210x_set_config(struct usb_
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -325,12 +335,12 @@ static int cp210x_set_config(struct usb_
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, data[0],
-				0, NULL, 0, 300);
+				port_priv->bInterfaceNumber, NULL, 0, 300);
 	}
 
 	kfree(buf);
@@ -830,11 +840,39 @@ static void cp210x_break_ctl (struct tty
 
 static int cp210x_startup(struct usb_serial *serial)
 {
+	struct cp210x_port_private *port_priv;
+	int i;
+
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+		if (!port_priv)
+			return -ENOMEM;
+
+		memset(port_priv, 0x00, sizeof(*port_priv));
+		port_priv->bInterfaceNumber =
+		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+		usb_set_serial_port_data(serial->port[i], port_priv);
+	}
+
 	return 0;
 }
 
+static void cp210x_release(struct usb_serial *serial)
+{
+	struct cp210x_port_private *port_priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(port_priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
+}
+
 static int __init cp210x_init(void)
 {
 	int retval;
author maintainer
#30 lore raw

PATCH 28/108 USB: serial: mos7840: Fixed MCS7820 device attach problem

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Donald Lee <[email protected]>

commit 093ea2d3a766cb8a4c4de57efec6c0a127a58792 upstream.

A MCS7820 device supports two serial ports and a MCS7840 device supports four serial ports. Both devices use the same driver, but the attach function in driver was unable to correctly handle the port numbers for MCS7820 device. This problem has been fixed in this patch and this fix has been verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices.

---
 drivers/usb/serial/mos7840.c |   81 +++++++++++++++++++++++++++++--------------
 1 file changed, 56 insertions(+), 25 deletions(-)
drivers/usb/serial/mos7840.c +56 -25
@@ -174,6 +174,7 @@
 
 #define CLK_MULTI_REGISTER         ((__u16)(0x02))
 #define CLK_START_VALUE_REGISTER   ((__u16)(0x03))
+#define GPIO_REGISTER              ((__u16)(0x07))
 
 #define SERIAL_LCR_DLAB            ((__u16)(0x0080))
 
@@ -1103,14 +1104,25 @@ static int mos7840_open(struct tty_struc
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
-
-	usb_fill_bulk_urb(mos7840_port->read_urb,
-			  serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  mos7840_port->read_urb->transfer_buffer_length,
-			  mos7840_bulk_in_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				(port->bulk_in_endpointAddress) + 2),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	}
 
 	dbg("mos7840_open: bulkin endpoint is %d",
 	    port->bulk_in_endpointAddress);
@@ -1521,13 +1533,25 @@ static int mos7840_write(struct tty_stru
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 	/* fill urb with data and submit  */
-	usb_fill_bulk_urb(urb,
-			  serial->dev,
-			  usb_sndbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-			  urb->transfer_buffer,
-			  transfer_size,
-			  mos7840_bulk_out_data_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				(port->bulk_out_endpointAddress) + 2),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	}
 
 	data1 = urb->transfer_buffer;
 	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
@@ -1840,7 +1864,7 @@ static int mos7840_send_cmd_write_baud_r
 
 	} else {
 #ifdef HW_flow_control
-		/ *setting h/w flow control bit to 0 */
+		/* setting h/w flow control bit to 0 */
 		Data = 0xb;
 		mos7840_port->shadowMCR = Data;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
@@ -2310,19 +2334,26 @@ static int mos7840_ioctl(struct tty_stru
 
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
-	int mos7840_num_ports = 0;
+	__u16 Data = 0x00;
+	int ret = 0;
+	int mos7840_num_ports;
 
-	dbg("numberofendpoints: cur %d, alt %d",
-	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
-	    (int)serial->interface->altsetting->desc.bNumEndpoints);
-	if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
-		mos7840_num_ports = serial->num_ports = 2;
-	} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	if ((Data & 0x01) == 0) {
+		mos7840_num_ports = 2;
+		serial->num_bulk_in = 2;
+		serial->num_bulk_out = 2;
+		serial->num_ports = 2;
+	} else {
+		mos7840_num_ports = 4;
 		serial->num_bulk_in = 4;
 		serial->num_bulk_out = 4;
-		mos7840_num_ports = serial->num_ports = 4;
+		serial->num_ports = 4;
 	}
-	dbg ("mos7840_num_ports = %d", mos7840_num_ports);
+
 	return mos7840_num_ports;
 }
 
author maintainer
#31 lore raw

PATCH 29/108 rt2x00: Add support for D-Link DWA-127 to rt2800usb.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gertjan van Wingerde <[email protected]>

commit d42a179b941a9e4cc6cf41d0f3cbadd75fc48a89 upstream.

This is an RT3070 based device.

---
 drivers/net/wireless/rt2x00/rt2800usb.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/rt2x00/rt2800usb.c +1 -0
@@ -839,6 +839,7 @@ static struct usb_device_id rt2800usb_de
 	{ USB_DEVICE(0x07d1, 0x3c0f) },
 	{ USB_DEVICE(0x07d1, 0x3c11) },
 	{ USB_DEVICE(0x07d1, 0x3c16) },
+	{ USB_DEVICE(0x2001, 0x3c1b) },
 	/* Draytek */
 	{ USB_DEVICE(0x07fa, 0x7712) },
 	/* Edimax */
author maintainer
#32 lore raw

PATCH 30/108 rtlwifi: Handle previous allocation failures when freeing device memory

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Graham <[email protected]>

commit 7f66c2f93e5779625c10d262c84537427a2673ca upstream.

Handle previous allocation failures when freeing device memory

---
 drivers/net/wireless/rtlwifi/pci.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/net/wireless/rtlwifi/pci.c +10 -6
@@ -1180,10 +1180,12 @@ static void _rtl_pci_free_tx_ring(struct
 		ring->idx = (ring->idx + 1) % ring->entries;
 	}
 
-	pci_free_consistent(rtlpci->pdev,
-			    sizeof(*ring->desc) * ring->entries,
-			    ring->desc, ring->dma);
-	ring->desc = NULL;
+	if (ring->desc) {
+		pci_free_consistent(rtlpci->pdev,
+				    sizeof(*ring->desc) * ring->entries,
+				    ring->desc, ring->dma);
+		ring->desc = NULL;
+	}
 }
 
 static void _rtl_pci_free_rx_ring(struct rtl_pci *rtlpci)
@@ -1207,12 +1209,14 @@ static void _rtl_pci_free_rx_ring(struct
 			kfree_skb(skb);
 		}
 
-		pci_free_consistent(rtlpci->pdev,
+		if (rtlpci->rx_ring[rx_queue_idx].desc) {
+			pci_free_consistent(rtlpci->pdev,
 				    sizeof(*rtlpci->rx_ring[rx_queue_idx].
 					   desc) * rtlpci->rxringcount,
 				    rtlpci->rx_ring[rx_queue_idx].desc,
 				    rtlpci->rx_ring[rx_queue_idx].dma);
-		rtlpci->rx_ring[rx_queue_idx].desc = NULL;
+			rtlpci->rx_ring[rx_queue_idx].desc = NULL;
+		}
 	}
 }
 
author maintainer
#33 lore raw

PATCH 31/108 rtlwifi: rtl8192c: Prevent sleeping from invalid context in rtl8192cu

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larry Finger <[email protected]>

commit ebecdcc12fed5d3c81853dea61a0a78a5aefab52 upstream.

When driver rtl8192cu is used with the debug level set to 3 or greater, the result is "sleeping function called from invalid context" due to an rcu_read_lock() call in the DM refresh routine in driver rtl8192c. This lock is not necessary as the USB driver does not use the struct being protected, thus the lock is set only when a PCI interface is active.

This bug is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42775.

---
 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +8 -3
@@ -1218,13 +1218,18 @@ static void rtl92c_dm_refresh_rate_adapt
 				 ("PreState = %d, CurState = %d\n",
 				  p_ra->pre_ratr_state, p_ra->ratr_state));
 
-			rcu_read_lock();
-			sta = ieee80211_find_sta(mac->vif, mac->bssid);
+			/* Only the PCI card uses sta in the update rate table
+			 * callback routine */
+			if (rtlhal->interface == INTF_PCI) {
+				rcu_read_lock();
+				sta = ieee80211_find_sta(mac->vif, mac->bssid);
+			}
 			rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
 					p_ra->ratr_state);
 
 			p_ra->pre_ratr_state = p_ra->ratr_state;
-			rcu_read_unlock();
+			if (rtlhal->interface == INTF_PCI)
+				rcu_read_unlock();
 		}
 	}
 }
author maintainer
#34 lore raw

PATCH 32/108 rtlwifi: rtl8192ce: Fix loss of receive performance

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jingjun Wu <[email protected]>

commit a9b89e2567c743483e6354f64d7a7e3a8c101e9e upstream.

Driver rtl8192ce when used with the RTL8188CE device would start at about 20 Mbps on a 54 Mbps connection, but quickly drop to 1 Mbps. One of the symptoms is that the AP would need to retransmit each packet 4 of 5 times before the driver would acknowledge it. Recovery is possible only by unloading and reloading the driver. This problem was reported at
https://bugzilla.redhat.com/show_bug.cgi?id=770207.

The problem is due to a missing update of the gain setting.

---
 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +4 -0
@@ -523,6 +523,10 @@ void rtl92c_dm_write_dig(struct ieee8021
 		  dm_digtable.cur_igvalue, dm_digtable.pre_igvalue,
 		  dm_digtable.backoff_val));
 
+	dm_digtable.cur_igvalue += 2;
+	if (dm_digtable.cur_igvalue > 0x3f)
+		dm_digtable.cur_igvalue = 0x3f;
+
 	if (dm_digtable.pre_igvalue != dm_digtable.cur_igvalue) {
 		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, 0x7f,
 			      dm_digtable.cur_igvalue);
author maintainer
#35 lore raw

PATCH 33/108 serial: PL011: clear pending interrupts

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Walleij <[email protected]>

commit 9b96fbacda34079dea0638ee1e92c56286f6114a upstream.

Chanho Min reported that when the boot loader transfers control to the kernel, there may be pending interrupts causing the UART to lock up in an eternal loop trying to pick tokens from the FIFO (since the RX interrupt flag indicates there are tokens) while in practice there are no tokens - in fact there is only a pending IRQ flag.

This patch address the issue with a combination of two patches suggested by Russell King that clears and mask all interrupts at probe() and clears any pending error and RX interrupts at port startup time.

We suspect the spurious interrupts are a side-effect of switching the UART from FIFO to non-FIFO mode.

---
 drivers/tty/serial/amba-pl011.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/tty/serial/amba-pl011.c +11 -4
@@ -1376,6 +1376,10 @@ static int pl011_startup(struct uart_por
 
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
+	/* Clear pending error and receive interrupts */
+	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+	       UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+
 	/*
 	 * Allocate the IRQ
 	 */
@@ -1410,10 +1414,6 @@ static int pl011_startup(struct uart_por
 	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
-	/* Clear pending error interrupts */
-	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
-	       uap->port.membase + UART011_ICR);
-
 	/*
 	 * initialise the old status of the modem signals
 	 */
@@ -1428,6 +1428,9 @@ static int pl011_startup(struct uart_por
 	 * as well.
 	 */
 	spin_lock_irq(&uap->port.lock);
+	/* Clear out any spuriously appearing RX interrupts */
+	 writew(UART011_RTIS | UART011_RXIS,
+		uap->port.membase + UART011_ICR);
 	uap->im = UART011_RTIM;
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
@@ -1904,6 +1907,10 @@ static int pl011_probe(struct amba_devic
 		goto unmap;
 	}
 
+	/* Ensure interrupts from this UART are masked and cleared */
+	writew(0, uap->port.membase + UART011_IMSC);
+	writew(0xffff, uap->port.membase + UART011_ICR);
+
 	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
#36 lore raw

Re: [ 033/108] serial: PL011: clear pending interrupts

Quoted 1 line · Greg KH

3.0-stable review patch. �If anyone has any objections, please let me know.

Objections: do not add this to the stable series unless the currently under-review patch "serial: PL011: move interrupt clearing" is also included.

Together they solve a real problem, but alone this causes a new problem.

Yours,
Linus Walleij

author maintainer
#37 lore raw

Re: [ 033/108] serial: PL011: clear pending interrupts

Quoted 10 lines · Linus Walleij
Quoted 1 line · Greg KH

3.0-stable review patch. �If anyone has any objections, please let me know.

Objections: do not add this to the stable series unless the currently under-review patch "serial: PL011: move interrupt clearing" is also included.

Together they solve a real problem, but alone this causes a new problem.

Ok, sorry about that, now removed from the 3.0, 3.2, and 3.3-stable trees.

When the other fix makes it into Linus's tree, care to remind me about this one so I can add it back?

thanks,

greg k-h

#38 lore raw

Re: [ 033/108] serial: PL011: clear pending interrupts

Quoted 2 lines · Greg KH

When the other fix makes it into Linus's tree, care to remind me about this one so I can add it back?

Sure!

Thanks a ton Greg.
Linus Walleij

author maintainer
#39 lore raw

PATCH 34/108 math: Introduce div64_long

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sasha Levin <[email protected]>

commit f910381a55cdaa097030291f272f6e6e4380c39a upstream.

Add a div64_long macro which is used to devide a 64bit number by a long (which can be 4 bytes on 32bit systems and 8 bytes on 64bit systems).

---
 include/linux/math64.h |    4 ++++
 1 file changed, 4 insertions(+)
include/linux/math64.h +4 -0
@@ -6,6 +6,8 @@
 
 #if BITS_PER_LONG == 64
 
+#define div64_long(x,y) div64_s64((x),(y))
+
 /**
  * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
  *
@@ -45,6 +47,8 @@ static inline s64 div64_s64(s64 dividend
 
 #elif BITS_PER_LONG == 32
 
+#define div64_long(x,y) div_s64((x),(y))
+
 #ifndef div_u64_rem
 static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
 {
author maintainer
#40 lore raw

PATCH 35/108 ntp: Fix integer overflow when setting time

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sasha Levin <[email protected]>

commit a078c6d0e6288fad6d83fb6d5edd91ddb7b6ab33 upstream.

'long secs' is passed as divisor to div_s64, which accepts a 32bit divisor. On 64bit machines that value is trimmed back from 8 bytes back to 4, causing a divide by zero when the number is bigger than (1 << 32) - 1 and all 32 lower bits are 0.

Use div64_long() instead.

---
 kernel/time/ntp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/time/ntp.c +1 -1
@@ -275,7 +275,7 @@ static inline s64 ntp_update_offset_fll(
 
 	time_status |= STA_MODE;
 
-	return div_s64(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
+	return div64_long(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);
 }
 
 static void ntp_update_offset(long offset)
author maintainer
#41 lore raw

PATCH 36/108 uevent: send events in correct order according to seqnum (v3)

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Vagin <[email protected]>

commit 7b60a18da393ed70db043a777fd9e6d5363077c4 upstream.

The queue handling in the udev daemon assumes that the events are ordered.

Before this patch uevent_seqnum is incremented under sequence_lock, than an event is send uner uevent_sock_mutex. I want to say that code contained a window between incrementing seqnum and sending an event.

This patch locks uevent_sock_mutex before incrementing uevent_seqnum.

v2: delete sequence_lock, uevent_seqnum is protected by uevent_sock_mutex
v3: unlock the mutex before the goto exit

Thanks for Kay for the comments.

---
 lib/kobject_uevent.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
lib/kobject_uevent.c +9 -10
@@ -29,16 +29,17 @@
 
 u64 uevent_seqnum;
 char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
-static DEFINE_SPINLOCK(sequence_lock);
 #ifdef CONFIG_NET
 struct uevent_sock {
 	struct list_head list;
 	struct sock *sk;
 };
 static LIST_HEAD(uevent_sock_list);
-static DEFINE_MUTEX(uevent_sock_mutex);
 #endif
 
+/* This lock protects uevent_seqnum and uevent_sock_list */
+static DEFINE_MUTEX(uevent_sock_mutex);
+
 /* the strings here must match the enum in include/linux/kobject.h */
 static const char *kobject_actions[] = {
 	[KOBJ_ADD] =		"add",
@@ -136,7 +137,6 @@ int kobject_uevent_env(struct kobject *k
 	struct kobject *top_kobj;
 	struct kset *kset;
 	const struct kset_uevent_ops *uevent_ops;
-	u64 seq;
 	int i = 0;
 	int retval = 0;
 #ifdef CONFIG_NET
@@ -243,17 +243,16 @@ int kobject_uevent_env(struct kobject *k
 	else if (action == KOBJ_REMOVE)
 		kobj->state_remove_uevent_sent = 1;
 
+	mutex_lock(&uevent_sock_mutex);
 	/* we will send an event, so request a new sequence number */
-	spin_lock(&sequence_lock);
-	seq = ++uevent_seqnum;
-	spin_unlock(&sequence_lock);
-	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
-	if (retval)
+	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)++uevent_seqnum);
+	if (retval) {
+		mutex_unlock(&uevent_sock_mutex);
 		goto exit;
+	}
 
 #if defined(CONFIG_NET)
 	/* send netlink message */
-	mutex_lock(&uevent_sock_mutex);
 	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
 		struct sock *uevent_sock = ue_sk->sk;
 		struct sk_buff *skb;
@@ -287,8 +286,8 @@ int kobject_uevent_env(struct kobject *k
 		} else
 			retval = -ENOMEM;
 	}
-	mutex_unlock(&uevent_sock_mutex);
 #endif
+	mutex_unlock(&uevent_sock_mutex);
 
 	/* call uevent_helper, usually only enabled during early boot */
 	if (uevent_helper[0] && !kobj_usermode_filter(kobj)) {
author maintainer
#42 lore raw

PATCH 37/108 genirq: Fix long-term regression in genirq irq_set_irq_type() handling

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Russell King <[email protected]>

commit a09b659cd68c10ec6a30cb91ebd2c327fcd5bfe5 upstream.

In 2008, commit 0c5d1eb77a8be ("genirq: record trigger type") modified the way set_irq_type() handles the 'no trigger' condition. However, this has an adverse effect on PCMCIA support on Intel StrongARM and probably PXA platforms.

PCMCIA has several status signals on the socket which can trigger interrupts; some of these status signals depend on the card's mode (whether it is configured in memory or IO mode). For example, cards have a 'Ready/IRQ' signal: in memory mode, this provides an indication to PCMCIA that the card has finished its power up initialization. In IO mode, it provides the device interrupt signal. Other status signals switch between on-board battery status and loud speaker output.

In classical PCMCIA implementations, where you have a specific socket controller, the controller provides a method to mask interrupts from the socket, and importantly ignore any state transitions on the pins which correspond with interrupts once masked. This masking prevents unwanted events caused by the removal and application of socket power being forwarded.

However, on platforms where there is no socket controller, the PCMCIA status and interrupt signals are routed to standard edge-triggered GPIOs. These GPIOs can be configured to interrupt on rising edge, falling edge, or never. This is where the problems start.

Edge triggered interrupts are required to record events while disabled via the usual methods of {free,request,disable,enable}_irq() to prevent problems with dropped interrupts (eg, the 8390 driver uses disable_irq() to defer the delivery of interrupts). As a result, these interfaces can not be used to implement the desired behaviour.

The side effect of this is that if the 'Ready/IRQ' GPIO is disabled via disable_irq() on suspend, and enabled via enable_irq() after resume, we will record the state transitions caused by powering events as valid interrupts, and foward them to the card driver, which may attempt to access a card which is not powered up.

This leads delays resume while drivers spin in their interrupt handlers, and complaints from drivers before they realize what's happened.

Moreover, in the case of the 'Ready/IRQ' signal, this is requested and freed by the card driver itself; the PCMCIA core has no idea whether the interrupt is requested, and, therefore, whether a call to disable_irq() would be valid. (We tried this around 2.4.17 / 2.5.1 kernel era, and ended up throwing it out because of this problem.)

Therefore, it was decided back in around 2002 to disable the edge triggering instead, resulting in all state transitions on the GPIO being ignored. That's what we actually need the hardware to do.

The commit above changes this behaviour; it explicitly prevents the 'no trigger' state being selected.

The reason that request_irq() does not accept the 'no trigger' state is for compatibility with existing drivers which do not provide their desired triggering configuration. The set_irq_type() function is 'new' and not used by non-trigger aware drivers.

Therefore, revert this change, and restore previously working platforms back to their former state.

---
 kernel/irq/chip.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
kernel/irq/chip.c +1 -2
@@ -61,8 +61,7 @@ int irq_set_irq_type(unsigned int irq, u
 		return -EINVAL;
 
 	type &= IRQ_TYPE_SENSE_MASK;
-	if (type != IRQ_TYPE_NONE)
-		ret = __irq_set_trigger(desc, irq, type);
+	ret = __irq_set_trigger(desc, irq, type);
 	irq_put_desc_busunlock(desc, flags);
 	return ret;
 }
author maintainer
#43 lore raw

PATCH 38/108 genirq: Fix incorrect check for forced IRQ thread handler

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Gordeev <[email protected]>

commit 540b60e24f3f4781d80e47122f0c4486a03375b8 upstream.

We do not want a bitwise AND between boolean operands

---
 kernel/irq/manage.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/irq/manage.c +1 -1
@@ -770,7 +770,7 @@ static int irq_thread(void *data)
 			struct irqaction *action);
 	int wake;
 
-	if (force_irqthreads & test_bit(IRQTF_FORCED_THREAD,
+	if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
 					&action->thread_flags))
 		handler_fn = irq_forced_thread_fn;
 	else
author maintainer
#44 lore raw

PATCH 39/108 rtc: Disable the alarm in the hardware (v2)

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rabin Vincent <[email protected]>

commit 41c7f7424259ff11009449f87c95656f69f9b186 upstream.

Currently, the RTC code does not disable the alarm in the hardware.

This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off.

	# echo $((`cat since_epoch`)+120) > wakealarm
	# echo 0 > wakealarm
	# poweroff

Fix this by disabling the alarm when there are no timers to run.

The original version of this patch was reverted. This version disables the irq directly instead of setting a disabled timer in the future.

Cc John Stultz <[email protected]>
[Merged in the second revision from Rabin]
---
 drivers/rtc/interface.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/rtc/interface.c +13 -2
@@ -762,6 +762,14 @@ static int rtc_timer_enqueue(struct rtc_
 	return 0;
 }
 
+static void rtc_alarm_disable(struct rtc_device *rtc)
+{
+	if (!rtc->ops || !rtc->ops->alarm_irq_enable)
+		return;
+
+	rtc->ops->alarm_irq_enable(rtc->dev.parent, false);
+}
+
 /**
  * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue
  * @rtc rtc device
@@ -783,8 +791,10 @@ static void rtc_timer_remove(struct rtc_
 		struct rtc_wkalrm alarm;
 		int err;
 		next = timerqueue_getnext(&rtc->timerqueue);
-		if (!next)
+		if (!next) {
+			rtc_alarm_disable(rtc);
 			return;
+		}
 		alarm.time = rtc_ktime_to_tm(next->expires);
 		alarm.enabled = 1;
 		err = __rtc_set_alarm(rtc, &alarm);
@@ -846,7 +856,8 @@ again:
 		err = __rtc_set_alarm(rtc, &alarm);
 		if (err == -ETIME)
 			goto again;
-	}
+	} else
+		rtc_alarm_disable(rtc);
 
 	mutex_unlock(&rtc->ops_lock);
 }
author maintainer
#45 lore raw

PATCH 40/108 p54spi: Release GPIO lines and IRQ on error in p54spi_probe

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Max Filippov <[email protected]>

commit 62ebeed8d00aef75eac4fd6c161cae75a41965ca upstream.

This makes it possible to reload driver if insmod has failed due to missing firmware.

---
 drivers/net/wireless/p54/p54spi.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/net/wireless/p54/p54spi.c +10 -4
@@ -623,19 +623,19 @@ static int __devinit p54spi_probe(struct
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "spi_setup failed");
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_power, "p54spi power");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free;
 	}
 
 	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_common;
+		goto err_free_gpio_power;
 	}
 
 	gpio_direction_output(p54spi_gpio_power, 0);
@@ -646,7 +646,7 @@ static int __devinit p54spi_probe(struct
 			  priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_common;
+		goto err_free_gpio_irq;
 	}
 
 	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
@@ -678,6 +678,12 @@ static int __devinit p54spi_probe(struct
 	return 0;
 
 err_free_common:
+	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
+err_free_gpio_irq:
+	gpio_free(p54spi_gpio_irq);
+err_free_gpio_power:
+	gpio_free(p54spi_gpio_power);
+err_free:
 	p54_free_common(priv->hw);
 	return ret;
 }
author maintainer
#46 lore raw

PATCH 41/108 IB/iser: Post initial receive buffers before sending the final login request

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Or Gerlitz <[email protected]>

commit 89e984e2c2cd14f77ccb26c47726ac7f13b70ae8 upstream.

An iser target may send iscsi NO-OP PDUs as soon as it marks the iSER iSCSI session as fully operative. This means that there is window where there are no posted receive buffers on the initiator side, so it's possible for the iSER RC connection to break because of RNR NAK / retry errors. To fix this, rely on the flags bits in the login request to have FFP (0x3) in the lower nibble as a marker for the final login request, and post an initial chunk of receive buffers before sending that login request instead of after getting the login response.

---
 drivers/infiniband/ulp/iser/iscsi_iser.c     |   18 +++-------------
 drivers/infiniband/ulp/iser/iscsi_iser.h     |    1 
 drivers/infiniband/ulp/iser/iser_initiator.c |   30 +++++++++++++++------------
 3 files changed, 22 insertions(+), 27 deletions(-)
drivers/infiniband/ulp/iser/iscsi_iser.c +4 -14
@@ -354,6 +354,9 @@ iscsi_iser_conn_bind(struct iscsi_cls_se
 	}
 	ib_conn = ep->dd_data;
 
+	if (iser_alloc_rx_descriptors(ib_conn))
+		return -ENOMEM;
+
 	/* binds the iSER connection retrieved from the previously
 	 * connected ep_handle to the iSCSI layer connection. exchanges
 	 * connection pointers */
@@ -388,19 +391,6 @@ iscsi_iser_conn_stop(struct iscsi_cls_co
 	iser_conn->ib_conn = NULL;
 }
 
-static int
-iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn)
-{
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	int err;
-
-	err = iser_conn_set_full_featured_mode(conn);
-	if (err)
-		return err;
-
-	return iscsi_conn_start(cls_conn);
-}
-
 static void iscsi_iser_session_destroy(struct iscsi_cls_session *cls_session)
 {
 	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
@@ -686,7 +676,7 @@ static struct iscsi_transport iscsi_iser
 	.get_conn_param		= iscsi_conn_get_param,
 	.get_ep_param		= iscsi_iser_get_ep_param,
 	.get_session_param	= iscsi_session_get_param,
-	.start_conn             = iscsi_iser_conn_start,
+	.start_conn             = iscsi_conn_start,
 	.stop_conn              = iscsi_iser_conn_stop,
 	/* iscsi host params */
 	.get_host_param		= iscsi_host_get_param,
drivers/infiniband/ulp/iser/iscsi_iser.h +1 -0
@@ -365,4 +365,5 @@ int iser_dma_map_task_data(struct iscsi_
 void iser_dma_unmap_task_data(struct iscsi_iser_task *iser_task);
 int  iser_initialize_task_headers(struct iscsi_task *task,
 			struct iser_tx_desc *tx_desc);
+int iser_alloc_rx_descriptors(struct iser_conn *ib_conn);
 #endif
drivers/infiniband/ulp/iser/iser_initiator.c +17 -13
@@ -170,7 +170,7 @@ static void iser_create_send_desc(struct
 }
 
 
-static int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
+int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
 {
 	int i, j;
 	u64 dma_addr;
@@ -236,23 +236,24 @@ void iser_free_rx_descriptors(struct ise
 	kfree(ib_conn->rx_descs);
 }
 
-/**
- *  iser_conn_set_full_featured_mode - (iSER API)
- */
-int iser_conn_set_full_featured_mode(struct iscsi_conn *conn)
+static int iser_post_rx_bufs(struct iscsi_conn *conn, struct iscsi_hdr *req)
 {
 	struct iscsi_iser_conn *iser_conn = conn->dd_data;
 
-	iser_dbg("Initially post: %d\n", ISER_MIN_POSTED_RX);
+	iser_dbg("req op %x flags %x\n", req->opcode, req->flags);
+	/* check if this is the last login - going to full feature phase */
+	if ((req->flags & ISCSI_FULL_FEATURE_PHASE) != ISCSI_FULL_FEATURE_PHASE)
+		return 0;
 
-	/* Check that there is no posted recv or send buffers left - */
-	/* they must be consumed during the login phase */
-	BUG_ON(iser_conn->ib_conn->post_recv_buf_count != 0);
-	BUG_ON(atomic_read(&iser_conn->ib_conn->post_send_buf_count) != 0);
-
-	if (iser_alloc_rx_descriptors(iser_conn->ib_conn))
-		return -ENOMEM;
+	/*
+	 * Check that there is one posted recv buffer (for the last login
+	 * response) and no posted send buffers left - they must have been
+	 * consumed during previous login phases.
+	 */
+	WARN_ON(iser_conn->ib_conn->post_recv_buf_count != 1);
+	WARN_ON(atomic_read(&iser_conn->ib_conn->post_send_buf_count) != 0);
 
+	iser_dbg("Initially post: %d\n", ISER_MIN_POSTED_RX);
 	/* Initial post receive buffers */
 	if (iser_post_recvm(iser_conn->ib_conn, ISER_MIN_POSTED_RX))
 		return -ENOMEM;
@@ -421,6 +422,9 @@ int iser_send_control(struct iscsi_conn
 		err = iser_post_recvl(iser_conn->ib_conn);
 		if (err)
 			goto send_control_error;
+		err = iser_post_rx_bufs(conn, task->hdr);
+		if (err)
+			goto send_control_error;
 	}
 
 	err = iser_post_send(iser_conn->ib_conn, mdesc);
author maintainer
#47 lore raw

PATCH 42/108 x86/ioapic: Add register level checks to detect bogus io-apic entries

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Suresh Siddha <[email protected]>

commit 73d63d038ee9f769f5e5b46792d227fe20e442c5 upstream.

With the recent changes to clear_IO_APIC_pin() which tries to clear remoteIRR bit explicitly, some of the users started to see "Unable to reset IRR for apic .." messages.

Close look shows that these are related to bogus IO-APIC entries which return's all 1's for their io-apic registers. And the above mentioned error messages are benign. But kernel should have ignored such io-apic's in the first place.

Check if register 0, 1, 2 of the listed io-apic are all 1's and ignore such io-apic.

---
 arch/x86/kernel/apic/io_apic.c |   40 ++++++++++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 8 deletions(-)
arch/x86/kernel/apic/io_apic.c +32 -8
@@ -3927,18 +3927,36 @@ int mp_find_ioapic_pin(int ioapic, u32 g
 static __init int bad_ioapic(unsigned long address)
 {
 	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_WARNING "WARNING: Max # of I/O APICs (%d) exceeded "
-		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+		pr_warn("WARNING: Max # of I/O APICs (%d) exceeded (found %d), skipping\n",
+			MAX_IO_APICS, nr_ioapics);
 		return 1;
 	}
 	if (!address) {
-		printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
+		pr_warn("WARNING: Bogus (zero) I/O APIC address found in table, skipping!\n");
 		return 1;
 	}
 	return 0;
 }
 
+static __init int bad_ioapic_register(int idx)
+{
+	union IO_APIC_reg_00 reg_00;
+	union IO_APIC_reg_01 reg_01;
+	union IO_APIC_reg_02 reg_02;
+
+	reg_00.raw = io_apic_read(idx, 0);
+	reg_01.raw = io_apic_read(idx, 1);
+	reg_02.raw = io_apic_read(idx, 2);
+
+	if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) {
+		pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n",
+			mpc_ioapic_addr(idx));
+		return 1;
+	}
+
+	return 0;
+}
+
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 {
 	int idx = 0;
@@ -3955,6 +3973,12 @@ void __init mp_register_ioapic(int id, u
 	ioapics[idx].mp_config.apicaddr = address;
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+
+	if (bad_ioapic_register(idx)) {
+		clear_fixmap(FIX_IO_APIC_BASE_0 + idx);
+		return;
+	}
+
 	ioapics[idx].mp_config.apicid = io_apic_unique_id(id);
 	ioapics[idx].mp_config.apicver = io_apic_get_version(idx);
 
@@ -3975,10 +3999,10 @@ void __init mp_register_ioapic(int id, u
 	if (gsi_cfg->gsi_end >= gsi_top)
 		gsi_top = gsi_cfg->gsi_end + 1;
 
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mpc_ioapic_id(idx),
-	       mpc_ioapic_ver(idx), mpc_ioapic_addr(idx),
-	       gsi_cfg->gsi_base, gsi_cfg->gsi_end);
+	pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n",
+		idx, mpc_ioapic_id(idx),
+		mpc_ioapic_ver(idx), mpc_ioapic_addr(idx),
+		gsi_cfg->gsi_base, gsi_cfg->gsi_end);
 
 	nr_ioapics++;
 }
author maintainer
#48 lore raw

PATCH 43/108 mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read mode

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrea Arcangeli <[email protected]>

commit 1a5a9906d4e8d1976b701f889d8f35d54b928f25 upstream.

In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge.

It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge().

Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped.

Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()).

The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above).

All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad).

		if (pmd_trans_huge(*pmd)) {
			if (next-addr != HPAGE_PMD_SIZE) {
				VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
				split_huge_page_pmd(vma->vm_mm, pmd);
			} else if (zap_huge_pmd(tlb, vma, pmd, addr))
				continue;
			/* fall through */
		}
		if (pmd_none_or_clear_bad(pmd))

Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179.

The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference.

====== start quote =======

      mapcount 0 page_mapcount 1
      kernel BUG at mm/huge_memory.c:1384!

    At some point prior to the panic, a "bad pmd ..." message similar to the
    following is logged on the console:

      mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7).

    The "bad pmd ..." message is logged by pmd_clear_bad() before it clears
    the page's PMD table entry.

        143 void pmd_clear_bad(pmd_t *pmd)
        144 {
    ->  145         pmd_ERROR(*pmd);
        146         pmd_clear(pmd);
        147 }

    After the PMD table entry has been cleared, there is an inconsistency
    between the actual number of PMD table entries that are mapping the page
    and the page's map count (_mapcount field in struct page). When the page
    is subsequently reclaimed, __split_huge_page() detects this inconsistency.

       1381         if (mapcount != page_mapcount(page))
       1382                 printk(KERN_ERR "mapcount %d page_mapcount %d\n",
       1383                        mapcount, page_mapcount(page));
    -> 1384         BUG_ON(mapcount != page_mapcount(page));

    The root cause of the problem is a race of two threads in a multithreaded
    process. Thread B incurs a page fault on a virtual address that has never
    been accessed (PMD entry is zero) while Thread A is executing an madvise()
    system call on a virtual address within the same 2 MB (huge page) range.

               virtual address space
              .---------------------.
              |                     |
              |                     |
            .-|---------------------|
            | |                     |
            | |                     |<-- B(fault)
            | |                     |
      2 MB  | |/////////////////////|-.
      huge <  |/////////////////////|  > A(range)
      page  | |/////////////////////|-'
            | |                     |
            | |                     |
            '-|---------------------|
              |                     |
              |                     |
              '---------------------'

    - Thread A is executing an madvise(..., MADV_DONTNEED) system call
      on the virtual address range "A(range)" shown in the picture.

    sys_madvise
      // Acquire the semaphore in shared mode.
      down_read(&current->mm->mmap_sem)
      ...
      madvise_vma
        switch (behavior)
        case MADV_DONTNEED:
             madvise_dontneed
               zap_page_range
                 unmap_vmas
                   unmap_page_range
                     zap_pud_range
                       zap_pmd_range
                         //
                         // Assume that this huge page has never been accessed.
                         // I.e. content of the PMD entry is zero (not mapped).
                         //
                         if (pmd_trans_huge(*pmd)) {
                             // We don't get here due to the above assumption.
                         }
                         //
                         // Assume that Thread B incurred a page fault and
             .---------> // sneaks in here as shown below.
             |           //
             |           if (pmd_none_or_clear_bad(pmd))
             |               {
             |                 if (unlikely(pmd_bad(*pmd)))
             |                     pmd_clear_bad
             |                     {
             |                       pmd_ERROR
             |                         // Log "bad pmd ..." message here.
             |                       pmd_clear
             |                         // Clear the page's PMD entry.
             |                         // Thread B incremented the map count
             |                         // in page_add_new_anon_rmap(), but
             |                         // now the page is no longer mapped
             |                         // by a PMD entry (-> inconsistency).
             |                     }
             |               }
             |
             v
    - Thread B is handling a page fault on virtual address "B(fault)" shown
      in the picture.

    ...
    do_page_fault
      __do_page_fault
        // Acquire the semaphore in shared mode.
        down_read_trylock(&mm->mmap_sem)
        ...
        handle_mm_fault
          if (pmd_none(*pmd) && transparent_hugepage_enabled(vma))
              // We get here due to the above assumption (PMD entry is zero).
              do_huge_pmd_anonymous_page
                alloc_hugepage_vma
                  // Allocate a new transparent huge page here.
                ...
                __do_huge_pmd_anonymous_page
                  ...
                  spin_lock(&mm->page_table_lock)
                  ...
                  page_add_new_anon_rmap
                    // Here we increment the page's map count (starts at -1).
                    atomic_set(&page->_mapcount, 0)
                  set_pmd_at
                    // Here we set the page's PMD entry which will be cleared
                    // when Thread A calls pmd_clear_bad().
                  ...
                  spin_unlock(&mm->page_table_lock)

    The mmap_sem does not prevent the race because both threads are acquiring
    it in shared mode (down_read).  Thread B holds the page_table_lock while
    the page's map count and PMD table entry are updated.  However, Thread A
    does not synchronize on that lock.

====== end quote =======

---
 arch/x86/kernel/vm86_32.c     |    2 +
 fs/proc/task_mmu.c            |    9 ++++++
 include/asm-generic/pgtable.h |   61 ++++++++++++++++++++++++++++++++++++++++++
 mm/memcontrol.c               |    4 ++
 mm/memory.c                   |   16 ++++++++---
 mm/mempolicy.c                |    2 -
 mm/mincore.c                  |    2 -
 mm/pagewalk.c                 |    2 -
 mm/swapfile.c                 |    4 --
 9 files changed, 92 insertions(+), 10 deletions(-)
arch/x86/kernel/vm86_32.c +2 -0
@@ -172,6 +172,7 @@ static void mark_screen_rdonly(struct mm
 	spinlock_t *ptl;
 	int i;
 
+	down_write(&mm->mmap_sem);
 	pgd = pgd_offset(mm, 0xA0000);
 	if (pgd_none_or_clear_bad(pgd))
 		goto out;
@@ -190,6 +191,7 @@ static void mark_screen_rdonly(struct mm
 	}
 	pte_unmap_unlock(pte, ptl);
 out:
+	up_write(&mm->mmap_sem);
 	flush_tlb();
 }
 
fs/proc/task_mmu.c +9 -0
@@ -407,6 +407,9 @@ static int smaps_pte_range(pmd_t *pmd, u
 	} else {
 		spin_unlock(&walk->mm->page_table_lock);
 	}
+
+	if (pmd_trans_unstable(pmd))
+		return 0;
 	/*
 	 * The mmap_sem held all the way back in m_start() is what
 	 * keeps khugepaged out of here and from collapsing things
@@ -505,6 +508,8 @@ static int clear_refs_pte_range(pmd_t *p
 	struct page *page;
 
 	split_huge_page_pmd(walk->mm, pmd);
+	if (pmd_trans_unstable(pmd))
+		return 0;
 
 	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
 	for (; addr != end; pte++, addr += PAGE_SIZE) {
@@ -668,6 +673,8 @@ static int pagemap_pte_range(pmd_t *pmd,
 	int err = 0;
 
 	split_huge_page_pmd(walk->mm, pmd);
+	if (pmd_trans_unstable(pmd))
+		return 0;
 
 	/* find the first VMA at or above 'addr' */
 	vma = find_vma(walk->mm, addr);
@@ -959,6 +966,8 @@ static int gather_pte_stats(pmd_t *pmd,
 		spin_unlock(&walk->mm->page_table_lock);
 	}
 
+	if (pmd_trans_unstable(pmd))
+		return 0;
 	orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
 	do {
 		struct page *page = can_gather_numa_stats(*pte, md->vma, addr);
include/asm-generic/pgtable.h +61 -0

74 lines not on this page · raw message

mm/memcontrol.c +4 -0
@@ -5290,6 +5290,8 @@ static int mem_cgroup_count_precharge_pt
 	spinlock_t *ptl;
 
 	split_huge_page_pmd(walk->mm, pmd);
+	if (pmd_trans_unstable(pmd))
+		return 0;
 
 	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
 	for (; addr != end; pte++, addr += PAGE_SIZE)
@@ -5451,6 +5453,8 @@ static int mem_cgroup_move_charge_pte_ra
 	spinlock_t *ptl;
 
 	split_huge_page_pmd(walk->mm, pmd);
+	if (pmd_trans_unstable(pmd))
+		return 0;
 retry:
 	pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
 	for (; addr != end; addr += PAGE_SIZE) {
mm/memory.c +12 -4
@@ -1228,16 +1228,24 @@ static inline unsigned long zap_pmd_rang
 	do {
 		next = pmd_addr_end(addr, end);
 		if (pmd_trans_huge(*pmd)) {
-			if (next-addr != HPAGE_PMD_SIZE) {
+			if (next - addr != HPAGE_PMD_SIZE) {
 				VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
 				split_huge_page_pmd(vma->vm_mm, pmd);
 			} else if (zap_huge_pmd(tlb, vma, pmd))
-				continue;
+				goto next;
 			/* fall through */
 		}
-		if (pmd_none_or_clear_bad(pmd))
-			continue;
+		/*
+		 * Here there can be other concurrent MADV_DONTNEED or
+		 * trans huge page faults running, and if the pmd is
+		 * none or trans huge it can change under us. This is
+		 * because MADV_DONTNEED holds the mmap_sem in read
+		 * mode.
+		 */
+		if (pmd_none_or_trans_huge_or_clear_bad(pmd))
+			goto next;
 		next = zap_pte_range(tlb, vma, pmd, addr, next, details);
+next:
 		cond_resched();
 	} while (pmd++, addr = next, addr != end);
 
mm/mempolicy.c +1 -1
@@ -511,7 +511,7 @@ static inline int check_pmd_range(struct
 	do {
 		next = pmd_addr_end(addr, end);
 		split_huge_page_pmd(vma->vm_mm, pmd);
-		if (pmd_none_or_clear_bad(pmd))
+		if (pmd_none_or_trans_huge_or_clear_bad(pmd))
 			continue;
 		if (check_pte_range(vma, pmd, addr, next, nodes,
 				    flags, private))
mm/mincore.c +1 -1
@@ -161,7 +161,7 @@ static void mincore_pmd_range(struct vm_
 			}
 			/* fall through */
 		}
-		if (pmd_none_or_clear_bad(pmd))
+		if (pmd_none_or_trans_huge_or_clear_bad(pmd))
 			mincore_unmapped_range(vma, addr, next, vec);
 		else
 			mincore_pte_range(vma, pmd, addr, next, vec);
mm/pagewalk.c +1 -1
@@ -59,7 +59,7 @@ again:
 			continue;
 
 		split_huge_page_pmd(walk->mm, pmd);
-		if (pmd_none_or_clear_bad(pmd))
+		if (pmd_none_or_trans_huge_or_clear_bad(pmd))
 			goto again;
 		err = walk_pte_range(pmd, addr, next, walk);
 		if (err)
mm/swapfile.c +1 -3
@@ -932,9 +932,7 @@ static inline int unuse_pmd_range(struct
 	pmd = pmd_offset(pud, addr);
 	do {
 		next = pmd_addr_end(addr, end);
-		if (unlikely(pmd_trans_huge(*pmd)))
-			continue;
-		if (pmd_none_or_clear_bad(pmd))
+		if (pmd_none_or_trans_huge_or_clear_bad(pmd))
 			continue;
 		ret = unuse_pte_range(vma, pmd, addr, next, entry, page);
 		if (ret)
author maintainer
#49 lore raw

PATCH 44/108 bootmem/sparsemem: remove limit constraint in alloc_bootmem_section

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nishanth Aravamudan <[email protected]>

commit f5bf18fa22f8c41a13eb8762c7373eb3a93a7333 upstream.

While testing AMS (Active Memory Sharing) / CMO (Cooperative Memory Overcommit) on powerpc, we tripped the following:

kernel BUG at mm/bootmem.c:483!
cpu 0x0: Vector: 700 (Program Check) at [c000000000c03940]

      pc: c000000000a62bd8: .alloc_bootmem_core+0x90/0x39c
      lr: c000000000a64bcc: .sparse_early_usemaps_alloc_node+0x84/0x29c
      sp: c000000000c03bc0
     msr: 8000000000021032
    current = 0xc000000000b0cce0
    paca    = 0xc000000001d80000
      pid   = 0, comm = swapper
  kernel BUG at mm/bootmem.c:483!
  enter ? for help
  [c000000000c03c80] c000000000a64bcc
  .sparse_early_usemaps_alloc_node+0x84/0x29c
  [c000000000c03d50] c000000000a64f10 .sparse_init+0x12c/0x28c
  [c000000000c03e20] c000000000a474f4 .setup_arch+0x20c/0x294
  [c000000000c03ee0] c000000000a4079c .start_kernel+0xb4/0x460
  [c000000000c03f90] c000000000009670 .start_here_common+0x1c/0x2c

This is

        BUG_ON(limit && goal + size > limit);

and after some debugging, it seems that

	goal = 0x7ffff000000
	limit = 0x80000000000

and sparse_early_usemaps_alloc_node ->
sparse_early_usemaps_alloc_pgdat_section calls

	return alloc_bootmem_section(usemap_size() * count, section_nr);

This is on a system with 8TB available via the AMS pool, and as a quirk of AMS in firmware, all of that memory shows up in node 0. So, we end up with an allocation that will fail the goal/limit constraints.

In theory, we could "fall-back" to alloc_bootmem_node() in sparse_early_usemaps_alloc_node(), but since we actually have HOTREMOVE defined, we'll BUG_ON() instead. A simple solution appears to be to unconditionally remove the limit condition in alloc_bootmem_section, meaning allocations are allowed to cross section boundaries (necessary for systems of this size).

Johannes Weiner pointed out that if alloc_bootmem_section() no longer guarantees section-locality, we need check_usemap_section_nr() to print possible cross-dependencies between node descriptors and the usemaps allocated through it. That makes the two loops in sparse_early_usemaps_alloc_node() identical, so re-factor the code a bit.

---
 mm/bootmem.c |    5 ++---
 mm/sparse.c  |   30 +++++++++++-------------------
 2 files changed, 13 insertions(+), 22 deletions(-)
mm/bootmem.c +2 -3
@@ -768,14 +768,13 @@ void * __init alloc_bootmem_section(unsi
 				    unsigned long section_nr)
 {
 	bootmem_data_t *bdata;
-	unsigned long pfn, goal, limit;
+	unsigned long pfn, goal;
 
 	pfn = section_nr_to_pfn(section_nr);
 	goal = pfn << PAGE_SHIFT;
-	limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
 	bdata = &bootmem_node_data[early_pfn_to_nid(pfn)];
 
-	return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, limit);
+	return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, 0);
 }
 #endif
 
mm/sparse.c +11 -19
@@ -353,29 +353,21 @@ static void __init sparse_early_usemaps_
 
 	usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nodeid),
 								 usemap_count);
-	if (usemap) {
-		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
-			if (!present_section_nr(pnum))
-				continue;
-			usemap_map[pnum] = usemap;
-			usemap += size;
+	if (!usemap) {
+		usemap = alloc_bootmem_node(NODE_DATA(nodeid), size * usemap_count);
+		if (!usemap) {
+			printk(KERN_WARNING "%s: allocation failed\n", __func__);
+			return;
 		}
-		return;
 	}
 
-	usemap = alloc_bootmem_node(NODE_DATA(nodeid), size * usemap_count);
-	if (usemap) {
-		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
-			if (!present_section_nr(pnum))
-				continue;
-			usemap_map[pnum] = usemap;
-			usemap += size;
-			check_usemap_section_nr(nodeid, usemap_map[pnum]);
-		}
-		return;
+	for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
+		if (!present_section_nr(pnum))
+			continue;
+		usemap_map[pnum] = usemap;
+		usemap += size;
+		check_usemap_section_nr(nodeid, usemap_map[pnum]);
 	}
-
-	printk(KERN_WARNING "%s: allocation failed\n", __func__);
 }
 
 #ifndef CONFIG_SPARSEMEM_VMEMMAP
author maintainer
#50 lore raw

PATCH 45/108 hugetlbfs: avoid taking i_mutex from hugetlbfs_read()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Aneesh Kumar K.V" <[email protected]>

commit a05b0855fd15504972dba2358e5faa172a1e50ba upstream.

Taking i_mutex in hugetlbfs_read() can result in deadlock with mmap as explained below

Thread A:
read() on hugetlbfs
hugetlbfs_read() called
i_mutex grabbed
hugetlbfs_read_actor() called
__copy_to_user() called
page fault is triggered
Thread B, sharing address space with A:
mmap() the same file
->mmap_sem is grabbed on task_B->mm->mmap_sem
hugetlbfs_file_mmap() is called
attempt to grab ->i_mutex and block waiting for A to give it up
Thread A:
pagefault handled blocked on attempt to grab task_A->mm->mmap_sem,
which happens to be the same thing as task_B->mm->mmap_sem. Block waiting for B to give it up.

AFAIU the i_mutex locking was added to hugetlbfs_read() as per
http://lkml.indiana.edu/hypermail/linux/kernel/0707.2/3066.html to take care of the race between truncate and read. This patch fixes this by looking at page->mapping under lock_page() (find_lock_page()) to ensure that the inode didn't get truncated in the range during a parallel read.

Ideally we can extend the patch to make sure we don't increase i_size in mmap. But that will break userspace, because applications will now have to use truncate(2) to increase i_size in hugetlbfs.

Based on the original patch from Hillf Danton.

---
 fs/hugetlbfs/inode.c |   25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)
fs/hugetlbfs/inode.c +9 -16
@@ -238,17 +238,10 @@ static ssize_t hugetlbfs_read(struct fil
 	loff_t isize;
 	ssize_t retval = 0;
 
-	mutex_lock(&inode->i_mutex);
-
 	/* validate length */
 	if (len == 0)
 		goto out;
 
-	isize = i_size_read(inode);
-	if (!isize)
-		goto out;
-
-	end_index = (isize - 1) >> huge_page_shift(h);
 	for (;;) {
 		struct page *page;
 		unsigned long nr, ret;
@@ -256,18 +249,21 @@ static ssize_t hugetlbfs_read(struct fil
 
 		/* nr is the maximum number of bytes to copy from this page */
 		nr = huge_page_size(h);
+		isize = i_size_read(inode);
+		if (!isize)
+			goto out;
+		end_index = (isize - 1) >> huge_page_shift(h);
 		if (index >= end_index) {
 			if (index > end_index)
 				goto out;
 			nr = ((isize - 1) & ~huge_page_mask(h)) + 1;
-			if (nr <= offset) {
+			if (nr <= offset)
 				goto out;
-			}
 		}
 		nr = nr - offset;
 
 		/* Find the page */
-		page = find_get_page(mapping, index);
+		page = find_lock_page(mapping, index);
 		if (unlikely(page == NULL)) {
 			/*
 			 * We have a HOLE, zero out the user-buffer for the
@@ -279,17 +275,18 @@ static ssize_t hugetlbfs_read(struct fil
 			else
 				ra = 0;
 		} else {
+			unlock_page(page);
+
 			/*
 			 * We have the page, copy it to user space buffer.
 			 */
 			ra = hugetlbfs_read_actor(page, offset, buf, len, nr);
 			ret = ra;
+			page_cache_release(page);
 		}
 		if (ra < 0) {
 			if (retval == 0)
 				retval = ra;
-			if (page)
-				page_cache_release(page);
 			goto out;
 		}
 
@@ -299,16 +296,12 @@ static ssize_t hugetlbfs_read(struct fil
 		index += offset >> huge_page_shift(h);
 		offset &= ~huge_page_mask(h);
 
-		if (page)
-			page_cache_release(page);
-
 		/* short read or no more work */
 		if ((ret != nr) || (len == 0))
 			break;
 	}
 out:
 	*ppos = ((loff_t)index << huge_page_shift(h)) + offset;
-	mutex_unlock(&inode->i_mutex);
 	return retval;
 }
 
author maintainer
#51 lore raw

PATCH 46/108 ASoC: pxa-ssp: atomically set stream active masks

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Mack <[email protected]>

commit 273b72c8ce6b28df6b49423d775c3e59072c73c5 upstream.

PXA's SSP engine fails to take its current channel phase into account when enabling a stream while the engine is already running. This results in randomly swapped left/right channels on either the record or the playback side, depending on which one was enabled first.

The following patch fixes this by factoring out the bit field modifications in question to a separate function that pauses the engine temporarily, modifies the bits and kicks it off again afterwards. Appearantly, a transition of SSCR0_SSE syncs both directions properly.

The patch has been rolled out to quite a number of devices over the last weeks and seems to fix the issue reliably.

---
 sound/soc/pxa/pxa-ssp.c |   61 ++++++++++++++++++++++++++++--------------------
 1 file changed, 36 insertions(+), 25 deletions(-)
sound/soc/pxa/pxa-ssp.c +36 -25
@@ -668,6 +668,38 @@ static int pxa_ssp_hw_params(struct snd_
 	return 0;
 }
 
+static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
+				    struct ssp_device *ssp, int value)
+{
+	uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+	uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+	uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+	uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
+
+	if (value && (sscr0 & SSCR0_SSE))
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (value)
+			sscr1 |= SSCR1_TSRE;
+		else
+			sscr1 &= ~SSCR1_TSRE;
+	} else {
+		if (value)
+			sscr1 |= SSCR1_RSRE;
+		else
+			sscr1 &= ~SSCR1_RSRE;
+	}
+
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+	if (value) {
+		pxa_ssp_write_reg(ssp, SSSR, sssr);
+		pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
+	}
+}
+
 static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
 			   struct snd_soc_dai *cpu_dai)
 {
@@ -681,42 +713,21 @@ static int pxa_ssp_trigger(struct snd_pc
 		pxa_ssp_enable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		val = pxa_ssp_read_reg(ssp, SSCR1);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			val |= SSCR1_TSRE;
-		else
-			val |= SSCR1_RSRE;
-		pxa_ssp_write_reg(ssp, SSCR1, val);
+		pxa_ssp_set_running_bit(substream, ssp, 1);
 		val = pxa_ssp_read_reg(ssp, SSSR);
 		pxa_ssp_write_reg(ssp, SSSR, val);
 		break;
 	case SNDRV_PCM_TRIGGER_START:
-		val = pxa_ssp_read_reg(ssp, SSCR1);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			val |= SSCR1_TSRE;
-		else
-			val |= SSCR1_RSRE;
-		pxa_ssp_write_reg(ssp, SSCR1, val);
-		pxa_ssp_enable(ssp);
+		pxa_ssp_set_running_bit(substream, ssp, 1);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
-		val = pxa_ssp_read_reg(ssp, SSCR1);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			val &= ~SSCR1_TSRE;
-		else
-			val &= ~SSCR1_RSRE;
-		pxa_ssp_write_reg(ssp, SSCR1, val);
+		pxa_ssp_set_running_bit(substream, ssp, 0);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		pxa_ssp_disable(ssp);
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		val = pxa_ssp_read_reg(ssp, SSCR1);
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			val &= ~SSCR1_TSRE;
-		else
-			val &= ~SSCR1_RSRE;
-		pxa_ssp_write_reg(ssp, SSCR1, val);
+		pxa_ssp_set_running_bit(substream, ssp, 0);
 		break;
 
 	default:
author maintainer
#52 lore raw

PATCH 47/108 tcm_loop: Set residual field for SCSI commands

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Dreier <[email protected]>

commit 6cf3fa6918baab0c447f1206f1cef9166ad04864 upstream.

If the target core signals an over- or under-run, tcm_loop should call scsi_set_resid() to tell the SCSI midlayer about the residual data length.

The difference can be seen by doing something like

    strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null

and looking at the "resid=" part of the SG_IO ioctl -- after this patch, the field is correctly reported as 512.

---
 drivers/target/loopback/tcm_loop.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/target/loopback/tcm_loop.c +6 -0
@@ -905,6 +905,9 @@ static int tcm_loop_queue_data_in(struct
 
 	sc->result = SAM_STAT_GOOD;
 	set_host_byte(sc, DID_OK);
+	if ((se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) ||
+	    (se_cmd->se_cmd_flags & SCF_UNDERFLOW_BIT))
+		scsi_set_resid(sc, se_cmd->residual_count);
 	sc->scsi_done(sc);
 	return 0;
 }
@@ -930,6 +933,9 @@ static int tcm_loop_queue_status(struct
 		sc->result = se_cmd->scsi_status;
 
 	set_host_byte(sc, DID_OK);
+	if ((se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) ||
+	    (se_cmd->se_cmd_flags & SCF_UNDERFLOW_BIT))
+		scsi_set_resid(sc, se_cmd->residual_count);
 	sc->scsi_done(sc);
 	return 0;
 }
author maintainer
#53 lore raw

PATCH 48/108 udlfb: remove sysfs framebuffer device with USB .disconnect()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kay Sievers <[email protected]>

commit ce880cb860f36694d2cdebfac9e6ae18176fe4c4 upstream.

The USB graphics card driver delays the unregistering of the framebuffer device to a workqueue, which breaks the userspace visible remove uevent sequence. Recent userspace tools started to support USB graphics card hotplug out-of-the-box and rely on proper events sent by the kernel.

The framebuffer device is a direct child of the USB interface which is removed immediately after the USB .disconnect() callback. But the fb device in /sys stays around until its final cleanup, at a time where all the parent devices have been removed already.

To work around that, we remove the sysfs fb device directly in the USB .disconnect() callback and leave only the cleanup of the internal fb data to the delayed work.

Before:

 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 remove   /2-1.2:1.0/graphics/fb0 (graphics)

After:

 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
---
 drivers/video/fbmem.c |   18 +++++++++++++++++-
 drivers/video/udlfb.c |    2 +-
 include/linux/fb.h    |    1 +
 3 files changed, 19 insertions(+), 2 deletions(-)
drivers/video/fbmem.c +17 -1
@@ -1651,6 +1651,7 @@ static int do_unregister_framebuffer(str
 	if (ret)
 		return -EINVAL;
 
+	unlink_framebuffer(fb_info);
 	if (fb_info->pixmap.addr &&
 	    (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
 		kfree(fb_info->pixmap.addr);
@@ -1658,7 +1659,6 @@ static int do_unregister_framebuffer(str
 	registered_fb[i] = NULL;
 	num_registered_fb--;
 	fb_cleanup_device(fb_info);
-	device_destroy(fb_class, MKDEV(FB_MAJOR, i));
 	event.info = fb_info;
 	fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
 
@@ -1667,6 +1667,22 @@ static int do_unregister_framebuffer(str
 	return 0;
 }
 
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+	int i;
+
+	i = fb_info->node;
+	if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
+		return -EINVAL;
+
+	if (fb_info->dev) {
+		device_destroy(fb_class, MKDEV(FB_MAJOR, i));
+		fb_info->dev = NULL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(unlink_framebuffer);
+
 void remove_conflicting_framebuffers(struct apertures_struct *a,
 				     const char *name, bool primary)
 {
drivers/video/udlfb.c +1 -1
@@ -1666,7 +1666,7 @@ static void dlfb_usb_disconnect(struct u
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
 		device_remove_file(info->dev, &fb_device_attrs[i]);
 	device_remove_bin_file(info->dev, &edid_attr);
-
+	unlink_framebuffer(info);
 	usb_set_intfdata(interface, NULL);
 
 	/* if clients still have us open, will be freed on last close */
include/linux/fb.h +1 -0
@@ -997,6 +997,7 @@ extern ssize_t fb_sys_write(struct fb_in
 /* drivers/video/fbmem.c */
 extern int register_framebuffer(struct fb_info *fb_info);
 extern int unregister_framebuffer(struct fb_info *fb_info);
+extern int unlink_framebuffer(struct fb_info *fb_info);
 extern void remove_conflicting_framebuffers(struct apertures_struct *a,
 				const char *name, bool primary);
 extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
author maintainer
#54 lore raw

PATCH 49/108 tcm_fc: Fix fc_exch memory leak in ft_send_resp_status

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <[email protected]>

commit 031ed4d565b31880a4136bb7366bc89f5b1dba7d upstream.

This patch fixes a bug in tcm_fc where fc_exch memory from fc_exch_mgr->ep_pool is currently being leaked by ft_send_resp_status() usage. Following current code in ft_queue_status() response path, using lport->tt.seq_send() needs to be followed by a lport->tt.exch_done() in order to release fc_exch memory back into libfc_em kmem_cache.

ft_send_resp_status() code is currently used in pre submit se_cmd ft_send_work() error exceptions, TM request setup exceptions, and main TM response callback path in ft_queue_tm_resp(). This bugfix addresses the leak in these cases.

---
 drivers/target/tcm_fc/tfc_cmd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/target/tcm_fc/tfc_cmd.c +4 -2
@@ -371,10 +371,12 @@ static void ft_send_resp_status(struct f
 
 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_DD_CMD_STATUS, 0);
 	sp = fr_seq(fp);
-	if (sp)
+	if (sp) {
 		lport->tt.seq_send(lport, sp, fp);
-	else
+		lport->tt.exch_done(sp);
+	} else {
 		lport->tt.frame_send(lport, fp);
+	}
 }
 
 /*
author maintainer
#55 lore raw

PATCH 50/108 md/bitmap: ensure to load bitmap when creating via sysfs.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: NeilBrown <[email protected]>

commit 4474ca42e2577563a919fd3ed782e2ec55bf11a2 upstream.

When commit 69e51b449d383e (md/bitmap: separate out loading a bitmap...) created bitmap_load, it missed calling it after bitmap_create when a bitmap is created through the sysfs interface.
So if a bitmap is added this way, we don't allocate memory properly and can crash.

This is suitable for any -stable release since 2.6.35.

---
 drivers/md/bitmap.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/md/bitmap.c +2 -0
@@ -1982,6 +1982,8 @@ location_store(mddev_t *mddev, const cha
 			if (mddev->pers) {
 				mddev->pers->quiesce(mddev, 1);
 				rv = bitmap_create(mddev);
+				if (!rv)
+					rv = bitmap_load(mddev);
 				if (rv) {
 					bitmap_destroy(mddev);
 					mddev->bitmap_info.offset = 0;
author maintainer
#56 lore raw

PATCH 51/108 md/raid1,raid10: avoid deadlock during resync/recovery.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: NeilBrown <[email protected]>

commit d6b42dcb995e6acd7cc276774e751ffc9f0ef4bf upstream.

If RAID1 or RAID10 is used under LVM or some other stacking block device, it is possible to enter a deadlock during resync or recovery.
This can happen if the upper level block device creates two requests to the RAID1 or RAID10. The first request gets processed, blocks recovery and queue requests for underlying requests in current->bio_list. A resync request then starts which will wait for those requests and block new IO.

But then the second request to the RAID1/10 will be attempted and it cannot progress until the resync request completes, which cannot progress until the underlying device requests complete, which are on a queue behind that second request.

So allow that second request to proceed even though there is a resync request about to start.

This is suitable for any -stable kernel.

---
 drivers/md/raid1.c  |   17 +++++++++++++++--
 drivers/md/raid10.c |   17 +++++++++++++++--
 2 files changed, 30 insertions(+), 4 deletions(-)
drivers/md/raid1.c +15 -2
@@ -614,9 +614,22 @@ static void wait_barrier(conf_t *conf)
 	spin_lock_irq(&conf->resync_lock);
 	if (conf->barrier) {
 		conf->nr_waiting++;
-		wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
+		/* Wait for the barrier to drop.
+		 * However if there are already pending
+		 * requests (preventing the barrier from
+		 * rising completely), and the
+		 * pre-process bio queue isn't empty,
+		 * then don't wait, as we need to empty
+		 * that queue to get the nr_pending
+		 * count down.
+		 */
+		wait_event_lock_irq(conf->wait_barrier,
+				    !conf->barrier ||
+				    (conf->nr_pending &&
+				     current->bio_list &&
+				     !bio_list_empty(current->bio_list)),
 				    conf->resync_lock,
-				    );
+			);
 		conf->nr_waiting--;
 	}
 	conf->nr_pending++;
drivers/md/raid10.c +15 -2
@@ -667,9 +667,22 @@ static void wait_barrier(conf_t *conf)
 	spin_lock_irq(&conf->resync_lock);
 	if (conf->barrier) {
 		conf->nr_waiting++;
-		wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
+		/* Wait for the barrier to drop.
+		 * However if there are already pending
+		 * requests (preventing the barrier from
+		 * rising completely), and the
+		 * pre-process bio queue isn't empty,
+		 * then don't wait, as we need to empty
+		 * that queue to get the nr_pending
+		 * count down.
+		 */
+		wait_event_lock_irq(conf->wait_barrier,
+				    !conf->barrier ||
+				    (conf->nr_pending &&
+				     current->bio_list &&
+				     !bio_list_empty(current->bio_list)),
 				    conf->resync_lock,
-				    );
+			);
 		conf->nr_waiting--;
 	}
 	conf->nr_pending++;
author maintainer
#57 lore raw

PATCH 52/108 drm/radeon: Restrict offset for legacy hardware cursor.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michel Dänzer <[email protected]>

commit c4353016dac10133fa5d8535af83f0c4845a2915 upstream.

The hardware only takes 27 bits for the offset, so larger offsets are truncated, and the hardware cursor shows random bits other than the intended ones.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46796

---
 drivers/gpu/drm/radeon/radeon_cursor.c |   13 +++++++++++--
 drivers/gpu/drm/radeon/radeon_object.c |   18 +++++++++++++++++-
 drivers/gpu/drm/radeon/radeon_object.h |    2 ++
 3 files changed, 30 insertions(+), 3 deletions(-)
drivers/gpu/drm/radeon/radeon_cursor.c +11 -2
@@ -151,7 +151,9 @@ int radeon_crtc_cursor_set(struct drm_cr
 			   uint32_t height)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_device *rdev = crtc->dev->dev_private;
 	struct drm_gem_object *obj;
+	struct radeon_bo *robj;
 	uint64_t gpu_addr;
 	int ret;
 
@@ -173,7 +175,15 @@ int radeon_crtc_cursor_set(struct drm_cr
 		return -ENOENT;
 	}
 
-	ret = radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &gpu_addr);
+	robj = gem_to_radeon_bo(obj);
+	ret = radeon_bo_reserve(robj, false);
+	if (unlikely(ret != 0))
+		goto fail;
+	/* Only 27 bit offset for legacy cursor */
+	ret = radeon_bo_pin_restricted(robj, RADEON_GEM_DOMAIN_VRAM,
+				       ASIC_IS_AVIVO(rdev) ? 0 : 1 << 27,
+				       &gpu_addr);
+	radeon_bo_unreserve(robj);
 	if (ret)
 		goto fail;
 
@@ -181,7 +191,6 @@ int radeon_crtc_cursor_set(struct drm_cr
 	radeon_crtc->cursor_height = height;
 
 	radeon_lock_cursor(crtc, true);
-	/* XXX only 27 bit offset for legacy cursor */
 	radeon_set_cursor(crtc, obj, gpu_addr);
 	radeon_show_cursor(crtc);
 	radeon_lock_cursor(crtc, false);
drivers/gpu/drm/radeon/radeon_object.c +17 -1
@@ -204,7 +204,8 @@ void radeon_bo_unref(struct radeon_bo **
 		*bo = NULL;
 }
 
-int radeon_bo_pin(struct radeon_bo *bo, u32 domain, u64 *gpu_addr)
+int radeon_bo_pin_restricted(struct radeon_bo *bo, u32 domain, u64 max_offset,
+			     u64 *gpu_addr)
 {
 	int r, i;
 
@@ -212,6 +213,7 @@ int radeon_bo_pin(struct radeon_bo *bo,
 		bo->pin_count++;
 		if (gpu_addr)
 			*gpu_addr = radeon_bo_gpu_offset(bo);
+		WARN_ON_ONCE(max_offset != 0);
 		return 0;
 	}
 	radeon_ttm_placement_from_domain(bo, domain);
@@ -219,6 +221,15 @@ int radeon_bo_pin(struct radeon_bo *bo,
 		/* force to pin into visible video ram */
 		bo->placement.lpfn = bo->rdev->mc.visible_vram_size >> PAGE_SHIFT;
 	}
+	if (max_offset) {
+		u64 lpfn = max_offset >> PAGE_SHIFT;
+
+		if (!bo->placement.lpfn)
+			bo->placement.lpfn = bo->rdev->mc.gtt_size >> PAGE_SHIFT;
+
+		if (lpfn < bo->placement.lpfn)
+			bo->placement.lpfn = lpfn;
+	}
 	for (i = 0; i < bo->placement.num_placement; i++)
 		bo->placements[i] |= TTM_PL_FLAG_NO_EVICT;
 	r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false, false);
@@ -232,6 +243,11 @@ int radeon_bo_pin(struct radeon_bo *bo,
 	return r;
 }
 
+int radeon_bo_pin(struct radeon_bo *bo, u32 domain, u64 *gpu_addr)
+{
+	return radeon_bo_pin_restricted(bo, domain, 0, gpu_addr);
+}
+
 int radeon_bo_unpin(struct radeon_bo *bo)
 {
 	int r, i;
drivers/gpu/drm/radeon/radeon_object.h +2 -0
@@ -144,6 +144,8 @@ extern int radeon_bo_kmap(struct radeon_
 extern void radeon_bo_kunmap(struct radeon_bo *bo);
 extern void radeon_bo_unref(struct radeon_bo **bo);
 extern int radeon_bo_pin(struct radeon_bo *bo, u32 domain, u64 *gpu_addr);
+extern int radeon_bo_pin_restricted(struct radeon_bo *bo, u32 domain,
+				    u64 max_offset, u64 *gpu_addr);
 extern int radeon_bo_unpin(struct radeon_bo *bo);
 extern int radeon_bo_evict_vram(struct radeon_device *rdev);
 extern void radeon_bo_force_delete(struct radeon_device *rdev);
author maintainer
#58 lore raw

PATCH 53/108 drm/radeon/kms: fix analog load detection on DVI-I connectors

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Deucher <[email protected]>

commit e00e8b5e760cbbe9067daeae5454d67c44c8d035 upstream.

We digital encoders have a detect function as well (for DP to VGA bridges), so we make sure we choose the analog one here.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=47007

---
 drivers/gpu/drm/radeon/radeon_connectors.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/radeon/radeon_connectors.c +4 -0
@@ -990,6 +990,10 @@ radeon_dvi_detect(struct drm_connector *
 
 			encoder = obj_to_encoder(obj);
 
+			if (encoder->encoder_type != DRM_MODE_ENCODER_DAC ||
+			    encoder->encoder_type != DRM_MODE_ENCODER_TVDAC)
+				continue;
+
 			encoder_funcs = encoder->helper_private;
 			if (encoder_funcs->detect) {
 				if (ret != connector_status_connected) {
author maintainer
#59 lore raw

PATCH 54/108 drm/radeon/kms: add connector quirk for Fujitsu D3003-S2 board

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Deucher <[email protected]>

commit 4c1b2d2da3451f5c8dd59bd7e05bd9729d2aee05 upstream.

vbios lists DVI-I port as VGA and DVI-D.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=47007

---
 drivers/gpu/drm/radeon/radeon_atombios.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/gpu/drm/radeon/radeon_atombios.c +14 -0
@@ -484,6 +484,20 @@ static bool radeon_atom_apply_quirks(str
 		struct radeon_device *rdev = dev->dev_private;
 		*i2c_bus = radeon_lookup_i2c_gpio(rdev, 0x93);
 	}
+
+	/* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */
+	if ((dev->pdev->device == 0x9802) &&
+	    (dev->pdev->subsystem_vendor == 0x1734) &&
+	    (dev->pdev->subsystem_device == 0x11bd)) {
+		if (*connector_type == DRM_MODE_CONNECTOR_VGA) {
+			*connector_type = DRM_MODE_CONNECTOR_DVII;
+			*line_mux = 0x3103;
+		} else if (*connector_type == DRM_MODE_CONNECTOR_DVID) {
+			*connector_type = DRM_MODE_CONNECTOR_DVII;
+		}
+	}
+
+
 	return true;
 }
 
author maintainer
#60 lore raw

PATCH 55/108 target: Dont set WBUS16 or SYNC bits in INQUIRY response

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Dreier <[email protected]>

commit effc6cc8828257c32c37635e737f14fd6e19ecd7 upstream.

SPC-4 says about the WBUS16 and SYNC bits:

The meanings of these fields are specific to SPI-5 (see 6.4.3). For SCSI transport protocols other than the SCSI Parallel Interface, these fields are reserved.

We don't have a SPI fabric module, so we should never set these bits. (The comment was misleading, since it only mentioned Sync but the actual code set WBUS16 too).

---
 drivers/target/target_core_cdb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_cdb.c +1 -1
@@ -106,7 +106,7 @@ target_emulate_inquiry_std(struct se_cmd
 		return 0;
 	}
 
-	buf[7] = 0x32; /* Sync=1 and CmdQue=1 */
+	buf[7] = 0x2; /* CmdQue=1 */
 
 	/*
 	 * Do not include vendor, product, reversion info in INQUIRY
author maintainer
#61 lore raw

PATCH 56/108 target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulation

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Roland Dreier <[email protected]>

commit 33395fb8a13731c7ef7b175dbf5a4d8a6738fe6c upstream.

The old code did (MSB << 8) & 0xff, which always evaluates to 0. Just use get_unaligned_be16() so we don't have to worry about whether our open-coded version is correct or not.

---
 drivers/target/target_core_alua.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/target/target_core_alua.c +3 -4
@@ -30,6 +30,7 @@
 #include <linux/configfs.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
+#include <asm/unaligned.h>
 
 #include <target/target_core_base.h>
 #include <target/target_core_device.h>
@@ -238,8 +239,7 @@ int core_emulate_set_target_port_groups(
 		 * changed.
 		 */
 		if (primary) {
-			tg_pt_id = ((ptr[2] << 8) & 0xff);
-			tg_pt_id |= (ptr[3] & 0xff);
+			tg_pt_id = get_unaligned_be16(ptr + 2);
 			/*
 			 * Locate the matching target port group ID from
 			 * the global tg_pt_gp list
@@ -280,8 +280,7 @@ int core_emulate_set_target_port_groups(
 			 * the Target Port in question for the the incoming
 			 * SET_TARGET_PORT_GROUPS op.
 			 */
-			rtpi = ((ptr[2] << 8) & 0xff);
-			rtpi |= (ptr[3] & 0xff);
+			rtpi = get_unaligned_be16(ptr + 2);
 			/*
 			 * Locate the matching relative target port identifer
 			 * for the struct se_device storage object.
author maintainer
#62 lore raw

PATCH 57/108 Bluetooth: Add AR30XX device ID on Asus laptops

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keng-Yu Lin <[email protected]>

commit 6b6ba88b5bb8779156b21bb957520a448c3642e2 upstream.

The ID is found on Asus K54HR and K53U.
Blacklist the AR3011-based device ID [0489:e03d]
and add to ath3k.c for firmware loading.

Below is the output of usb-devices script:

Before the fiwmware loading:

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e03d Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

After the fiwmware loading:

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3005 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
---
 drivers/bluetooth/ath3k.c |    1 +
 drivers/bluetooth/btusb.c |    1 +
 2 files changed, 2 insertions(+)
drivers/bluetooth/ath3k.c +1 -0
@@ -64,6 +64,7 @@ static struct usb_device_id ath3k_table[
 	{ USB_DEVICE(0x0CF3, 0x3002) },
 	{ USB_DEVICE(0x13d3, 0x3304) },
 	{ USB_DEVICE(0x0930, 0x0215) },
+	{ USB_DEVICE(0x0489, 0xE03D) },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03F0, 0x311D) },
drivers/bluetooth/btusb.c +1 -0
@@ -116,6 +116,7 @@ static struct usb_device_id blacklist_ta
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros AR9285 Malbec with sflash firmware */
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
author maintainer
#63 lore raw

PATCH 58/108 HID: add extra hotkeys in Asus AIO keyboards

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keng-Yu Lin <[email protected]>

commit 3596bb929f2abd3433c2eaa5755fad48ac207af1 upstream.

The Asus All-In-One PC has a wireless keyboard with wifi toggle, brightness up, brightness down and display off hotkeys.

This patch adds suppoort for these hotkeys.

---
 drivers/hid/hid-chicony.c |    5 +++++
 drivers/hid/hid-core.c    |    1 +
 drivers/hid/hid-ids.h     |    1 +
 3 files changed, 7 insertions(+)
drivers/hid/hid-chicony.c +5 -0
@@ -45,6 +45,10 @@ static int ch_input_mapping(struct hid_d
 	case 0xff09: ch_map_key_clear(BTN_9);	break;
 	case 0xff0a: ch_map_key_clear(BTN_A);	break;
 	case 0xff0b: ch_map_key_clear(BTN_B);	break;
+	case 0x00f1: ch_map_key_clear(KEY_WLAN);	break;
+	case 0x00f2: ch_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
+	case 0x00f3: ch_map_key_clear(KEY_BRIGHTNESSUP);	break;
+	case 0x00f4: ch_map_key_clear(KEY_DISPLAY_OFF);	break;
 	default:
 		return 0;
 	}
@@ -53,6 +57,7 @@ static int ch_input_mapping(struct hid_d
 
 static const struct hid_device_id ch_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ch_devices);
drivers/hid/hid-core.c +1 -0
@@ -1372,6 +1372,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
drivers/hid/hid-ids.h +1 -0
@@ -189,6 +189,7 @@
 #define USB_DEVICE_ID_CHICONY_TACTICAL_PAD	0x0418
 #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH	0xb19d
 #define USB_DEVICE_ID_CHICONY_WIRELESS	0x0618
+#define USB_DEVICE_ID_CHICONY_WIRELESS2	0x1123
 
 #define USB_VENDOR_ID_CHUNGHWAT		0x2247
 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH	0x0001
author maintainer
#64 lore raw

PATCH 59/108 HID: add more hotkeys in Asus AIO keyboards

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keng-Yu Lin <[email protected]>

commit 6c30d5a53229aad22bb675e0bd6eb518ecaa4316 upstream.

Add support for the camera key. The hotkey for
Asus S.H.E(Super Hybrid Engine) mode is mapped to KEY_KEY_PROG1 just for notifying the userspace.

---
 drivers/hid/hid-chicony.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/hid/hid-chicony.c +2 -0
@@ -49,6 +49,8 @@ static int ch_input_mapping(struct hid_d
 	case 0x00f2: ch_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
 	case 0x00f3: ch_map_key_clear(KEY_BRIGHTNESSUP);	break;
 	case 0x00f4: ch_map_key_clear(KEY_DISPLAY_OFF);	break;
+	case 0x00f7: ch_map_key_clear(KEY_CAMERA);	break;
+	case 0x00f8: ch_map_key_clear(KEY_PROG1);	break;
 	default:
 		return 0;
 	}
author maintainer
#65 lore raw

PATCH 60/108 pata_legacy: correctly mask recovery field for HT6560B

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <[email protected]>

commit 9716387311c790de381214c03e7f1b72b91a8189 upstream.

According to the HT6560H datasheet, the recovery timing field is 4-bit wide, with a value of 0 meaning 16 cycles. Correct obvious thinko in the recovery field mask.

---
 drivers/ata/pata_legacy.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/ata/pata_legacy.c +1 -2
@@ -396,8 +396,7 @@ static void ht6560b_set_piomode(struct a
 	ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
 
 	active = clamp_val(t.active, 2, 15);
-	recover = clamp_val(t.recover, 2, 16);
-	recover &= 0x15;
+	recover = clamp_val(t.recover, 2, 16) & 0x0F;
 
 	inb(0x3E6);
 	inb(0x3E6);
author maintainer
#66 lore raw

PATCH 61/108 firewire: ohci: fix too-early completion of IR multichannel buffers

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <[email protected]>

commit 0c0efbacab8d70700d13301e0ae7975783c0cb0a upstream.

handle_ir_buffer_fill() assumed that a completed descriptor would be indicated by a non-zero transfer_status (as in most other descriptors). However, this field is written by the controller as soon as (the end of) the first packet has been written into the buffer. As a consequence, if we happen to run into such a descriptor when the interrupt handler is executed after such a packet has completed, the descriptor would be taken out of the list of active descriptors as soon as the buffer had been partially filled, so the event for the buffer being completely filled would never be sent.

To fix this, handle descriptors only when they have been completely filled, i.e., when res_count == 0. (This also matches the condition that is reported by the controller with an interrupt.)

---
 drivers/firewire/ohci.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/firewire/ohci.c +2 -3
@@ -2558,15 +2558,14 @@ static int handle_ir_buffer_fill(struct
 	struct iso_context *ctx =
 		container_of(context, struct iso_context, context);
 
-	if (!last->transfer_status)
+	if (last->res_count != 0)
 		/* Descriptor(s) not done yet, stop iteration */
 		return 0;
 
 	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
 		ctx->base.callback.mc(&ctx->base,
 				      le32_to_cpu(last->data_address) +
-				      le16_to_cpu(last->req_count) -
-				      le16_to_cpu(last->res_count),
+				      le16_to_cpu(last->req_count),
 				      ctx->base.callback_data);
 
 	return 1;
author maintainer
#67 lore raw

PATCH 62/108 video:uvesafb: Fix oops that uvesafb try to execute NX-protected page

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang YanQing <[email protected]>

commit ec0d22e4d563e7cce9f6678e2000900755c2989d upstream.

This patch fixes the oops below

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---
---
 drivers/video/uvesafb.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/video/uvesafb.c +10 -2
@@ -23,6 +23,7 @@
 #include <video/uvesafb.h>
 #ifdef CONFIG_X86
 #include <video/vga.h>
+#include <linux/pci.h>
 #endif
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
@@ -815,8 +816,15 @@ static int __devinit uvesafb_vbe_init(st
 	par->pmi_setpal = pmi_setpal;
 	par->ypan = ypan;
 
-	if (par->pmi_setpal || par->ypan)
-		uvesafb_vbe_getpmi(task, par);
+	if (par->pmi_setpal || par->ypan) {
+		if (pcibios_enabled) {
+			uvesafb_vbe_getpmi(task, par);
+		} else {
+			par->pmi_setpal = par->ypan = 0;
+			printk(KERN_WARNING "uvesafb: PCI BIOS area is NX."
+				"Can't use protected mode interface\n");
+		}
+	}
 #else
 	/* The protected mode interface is not available on non-x86. */
 	par->pmi_setpal = par->ypan = 0;
#68 lore raw

Re: [ 062/108] video:uvesafb: Fix oops that uvesafb try to execute NX-protected page

Hi Greg,

Quoted 1 line · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

the same as for 3.3: This patch would require exporting 'pcibios_enabled' to not break building uvesafb as a module. As Alan did not agree with this approach it is not suitable for stable as is.

Best regards,

Florian Tobias Schandinat

Quoted 122 lines

------------------

From: Wang YanQing <[email protected]>

commit ec0d22e4d563e7cce9f6678e2000900755c2989d upstream.

This patch fixes the oops below

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---
---
 drivers/video/uvesafb.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/video/uvesafb.c +10 -2
@@ -23,6 +23,7 @@
 #include <video/uvesafb.h>
 #ifdef CONFIG_X86
 #include <video/vga.h>
+#include <linux/pci.h>
 #endif
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
@@ -815,8 +816,15 @@ static int __devinit uvesafb_vbe_init(st
 	par->pmi_setpal = pmi_setpal;
 	par->ypan = ypan;
 
-	if (par->pmi_setpal || par->ypan)
-		uvesafb_vbe_getpmi(task, par);
+	if (par->pmi_setpal || par->ypan) {
+		if (pcibios_enabled) {
+			uvesafb_vbe_getpmi(task, par);
+		} else {
+			par->pmi_setpal = par->ypan = 0;
+			printk(KERN_WARNING "uvesafb: PCI BIOS area is NX."
+				"Can't use protected mode interface\n");
+		}
+	}
 #else
 	/* The protected mode interface is not available on non-x86. */
 	par->pmi_setpal = par->ypan = 0;
author maintainer
#69 lore raw

Re: [ 062/108] video:uvesafb: Fix oops that uvesafb try to execute NX-protected page

Quoted 8 lines · Florian Tobias Schandinat

Hi Greg,

Quoted 1 line · Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

the same as for 3.3: This patch would require exporting 'pcibios_enabled' to not break building uvesafb as a module. As Alan did not agree with this approach it is not suitable for stable as is.

Now removed, thanks.

greg k-h

author maintainer
#70 lore raw

PATCH 63/108 KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Stephan=20B=C3=A4rwolf?= <[email protected]>

commit bdb42f5afebe208eae90406959383856ae2caf2b upstream.

In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context.

[mtosatti: cleanup/beautify code]

---
 arch/x86/include/asm/kvm_emulate.h |    3 +++
 arch/x86/kvm/x86.c                 |   23 +++++++++++++++++++++++
 2 files changed, 26 insertions(+)
arch/x86/include/asm/kvm_emulate.h +3 -0
@@ -189,6 +189,9 @@ struct x86_emulate_ops {
 	int (*intercept)(struct x86_emulate_ctxt *ctxt,
 			 struct x86_instruction_info *info,
 			 enum x86_intercept_stage stage);
+
+	bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+			 u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
 };
 
 typedef u32 __attribute__((vector_size(16))) sse128_t;
arch/x86/kvm/x86.c +23 -0
@@ -4407,6 +4407,28 @@ static int emulator_intercept(struct x86
 	return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage);
 }
 
+static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
+			       u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
+{
+	struct kvm_cpuid_entry2 *cpuid = NULL;
+
+	if (eax && ecx)
+		cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt),
+					    *eax, *ecx);
+
+	if (cpuid) {
+		*eax = cpuid->eax;
+		*ecx = cpuid->ecx;
+		if (ebx)
+			*ebx = cpuid->ebx;
+		if (edx)
+			*edx = cpuid->edx;
+		return true;
+	}
+
+	return false;
+}
+
 static struct x86_emulate_ops emulate_ops = {
 	.read_std            = kvm_read_guest_virt_system,
 	.write_std           = kvm_write_guest_virt_system,
@@ -4437,6 +4459,7 @@ static struct x86_emulate_ops emulate_op
 	.get_fpu             = emulator_get_fpu,
 	.put_fpu             = emulator_put_fpu,
 	.intercept           = emulator_intercept,
+	.get_cpuid           = emulator_get_cpuid,
 };
 
 static void cache_all_regs(struct kvm_vcpu *vcpu)
author maintainer
#71 lore raw

PATCH 64/108 KVM: x86: fix missing checks in syscall emulation

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Stephan=20B=C3=A4rwolf?= <[email protected]>

commit c2226fc9e87ba3da060e47333657cd6616652b84 upstream.

On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application:

    [bits 32]
    global _start
    SECTION .text
    _start: syscall

(I tested it with winxp and linux - both always crashed)

Disassembly of section .text:

00000000 <_start>:
0: 0f 05 syscall

The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid)

Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs.

Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts.

[mtosatti: cleanup/beautify code]

---
 arch/x86/include/asm/kvm_emulate.h |   13 +++++++++
 arch/x86/kvm/emulate.c             |   51 +++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)
arch/x86/include/asm/kvm_emulate.h +13 -0
@@ -301,6 +301,19 @@ struct x86_emulate_ctxt {
 #define X86EMUL_MODE_PROT     (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
 			       X86EMUL_MODE_PROT64)
 
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
 enum x86_intercept_stage {
 	X86_ICTP_NONE = 0,   /* Allow zero-init to not match anything */
 	X86_ICPT_PRE_EXCEPT,
arch/x86/kvm/emulate.c +51 -0

66 lines not on this page · raw message

author maintainer
#72 lore raw

PATCH 65/108 NFS: Properly handle the case where the delegation is revoked

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit a1d0b5eebc4fd6e0edb02688b35f17f67f42aea5 upstream.

If we know that the delegation stateid is bad or revoked, we need to remove that delegation as soon as possible, and then mark all the stateids that relied on that delegation for recovery. We cannot use the delegation as part of the recovery process.

Also note that NFSv4.1 uses a different error code (NFS4ERR_DELEG_REVOKED) to indicate that the delegation was revoked.

Finally, ensure that setlk() and setattr() can both recover safely from a revoked delegation.

---
 fs/nfs/delegation.c |   11 +++++++++++
 fs/nfs/delegation.h |    1 +
 fs/nfs/nfs4_fs.h    |    2 ++
 fs/nfs/nfs4proc.c   |   18 ++++++++++++++++--
 fs/nfs/nfs4state.c  |   29 +++++++++++++++++++++++++++--
 5 files changed, 57 insertions(+), 4 deletions(-)
fs/nfs/delegation.c +11 -0
@@ -466,6 +466,17 @@ static void nfs_delegation_run_state_man
 		nfs4_schedule_state_manager(clp);
 }
 
+void nfs_remove_bad_delegation(struct inode *inode)
+{
+	struct nfs_delegation *delegation;
+
+	delegation = nfs_detach_delegation(NFS_I(inode), NFS_SERVER(inode));
+	if (delegation) {
+		nfs_inode_find_state_and_recover(inode, &delegation->stateid);
+		nfs_free_delegation(delegation);
+	}
+}
+
 /**
  * nfs_expire_all_delegation_types
  * @clp: client to process
fs/nfs/delegation.h +1 -0
@@ -45,6 +45,7 @@ void nfs_expire_unreferenced_delegations
 void nfs_handle_cb_pathdown(struct nfs_client *clp);
 int nfs_client_return_marked_delegations(struct nfs_client *clp);
 int nfs_delegations_present(struct nfs_client *clp);
+void nfs_remove_bad_delegation(struct inode *inode);
 
 void nfs_delegation_mark_reclaim(struct nfs_client *clp);
 void nfs_delegation_reap_unclaimed(struct nfs_client *clp);
fs/nfs/nfs4_fs.h +2 -0
@@ -344,6 +344,8 @@ extern void nfs4_put_open_state(struct n
 extern void nfs4_close_state(struct path *, struct nfs4_state *, fmode_t);
 extern void nfs4_close_sync(struct path *, struct nfs4_state *, fmode_t);
 extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t);
+extern void nfs_inode_find_state_and_recover(struct inode *inode,
+		const nfs4_stateid *stateid);
 extern void nfs4_schedule_lease_recovery(struct nfs_client *);
 extern void nfs4_schedule_state_manager(struct nfs_client *);
 extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *);
fs/nfs/nfs4proc.c +16 -2
@@ -260,8 +260,11 @@ static int nfs4_handle_exception(struct
 	switch(errorcode) {
 		case 0:
 			return 0;
+		case -NFS4ERR_DELEG_REVOKED:
 		case -NFS4ERR_ADMIN_REVOKED:
 		case -NFS4ERR_BAD_STATEID:
+			if (state != NULL)
+				nfs_remove_bad_delegation(state->inode);
 		case -NFS4ERR_OPENMODE:
 			if (state == NULL)
 				break;
@@ -1305,8 +1308,11 @@ int nfs4_open_delegation_recall(struct n
 				 * The show must go on: exit, but mark the
 				 * stateid as needing recovery.
 				 */
+			case -NFS4ERR_DELEG_REVOKED:
 			case -NFS4ERR_ADMIN_REVOKED:
 			case -NFS4ERR_BAD_STATEID:
+				nfs_inode_find_state_and_recover(state->inode,
+						stateid);
 				nfs4_schedule_stateid_recovery(server, state);
 			case -EKEYEXPIRED:
 				/*
@@ -1862,7 +1868,9 @@ static int nfs4_do_setattr(struct inode
 			   struct nfs4_state *state)
 {
 	struct nfs_server *server = NFS_SERVER(inode);
-	struct nfs4_exception exception = { };
+	struct nfs4_exception exception = {
+		.state = state,
+	};
 	int err;
 	do {
 		err = nfs4_handle_exception(server,
@@ -3678,8 +3686,11 @@ nfs4_async_handle_error(struct rpc_task
 	if (task->tk_status >= 0)
 		return 0;
 	switch(task->tk_status) {
+		case -NFS4ERR_DELEG_REVOKED:
 		case -NFS4ERR_ADMIN_REVOKED:
 		case -NFS4ERR_BAD_STATEID:
+			if (state != NULL)
+				nfs_remove_bad_delegation(state->inode);
 		case -NFS4ERR_OPENMODE:
 			if (state == NULL)
 				break;
@@ -4484,7 +4495,9 @@ out:
 
 static int nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock *request)
 {
-	struct nfs4_exception exception = { };
+	struct nfs4_exception exception = {
+		.state = state,
+	};
 	int err;
 
 	do {
@@ -4577,6 +4590,7 @@ int nfs4_lock_delegation_recall(struct n
 				 * The show must go on: exit, but mark the
 				 * stateid as needing recovery.
 				 */
+			case -NFS4ERR_DELEG_REVOKED:
 			case -NFS4ERR_ADMIN_REVOKED:
 			case -NFS4ERR_BAD_STATEID:
 			case -NFS4ERR_OPENMODE:
fs/nfs/nfs4state.c +27 -2
@@ -1065,12 +1065,37 @@ void nfs4_schedule_stateid_recovery(cons
 {
 	struct nfs_client *clp = server->nfs_client;
 
-	if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
-		nfs_async_inode_return_delegation(state->inode, &state->stateid);
 	nfs4_state_mark_reclaim_nograce(clp, state);
 	nfs4_schedule_state_manager(clp);
 }
 
+void nfs_inode_find_state_and_recover(struct inode *inode,
+		const nfs4_stateid *stateid)
+{
+	struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
+	struct nfs_inode *nfsi = NFS_I(inode);
+	struct nfs_open_context *ctx;
+	struct nfs4_state *state;
+	bool found = false;
+
+	spin_lock(&inode->i_lock);
+	list_for_each_entry(ctx, &nfsi->open_files, list) {
+		state = ctx->state;
+		if (state == NULL)
+			continue;
+		if (!test_bit(NFS_DELEGATED_STATE, &state->flags))
+			continue;
+		if (memcmp(state->stateid.data, stateid->data, sizeof(state->stateid.data)) != 0)
+			continue;
+		nfs4_state_mark_reclaim_nograce(clp, state);
+		found = true;
+	}
+	spin_unlock(&inode->i_lock);
+	if (found)
+		nfs4_schedule_state_manager(clp);
+}
+
+
 static int nfs4_reclaim_locks(struct nfs4_state *state, const struct nfs4_state_recovery_ops *ops)
 {
 	struct inode *inode = state->inode;
author maintainer
#73 lore raw

PATCH 66/108 NFSv4: Return the delegation if the server returns NFS4ERR_OPENMODE

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 3114ea7a24d3264c090556a2444fc6d2c06176d4 upstream.

If a setattr() fails because of an NFS4ERR_OPENMODE error, it is probably due to us holding a read delegation. Ensure that the recovery routines return that delegation in this case.

---
 fs/nfs/nfs4_fs.h  |    1 +
 fs/nfs/nfs4proc.c |   13 ++++++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)
fs/nfs/nfs4_fs.h +1 -0
@@ -209,6 +209,7 @@ struct nfs4_exception {
 	long timeout;
 	int retry;
 	struct nfs4_state *state;
+	struct inode *inode;
 };
 
 struct nfs4_state_recovery_ops {
fs/nfs/nfs4proc.c +12 -1
@@ -254,18 +254,28 @@ static int nfs4_handle_exception(struct
 {
 	struct nfs_client *clp = server->nfs_client;
 	struct nfs4_state *state = exception->state;
+	struct inode *inode = exception->inode;
 	int ret = errorcode;
 
 	exception->retry = 0;
 	switch(errorcode) {
 		case 0:
 			return 0;
+		case -NFS4ERR_OPENMODE:
+			if (nfs_have_delegation(inode, FMODE_READ)) {
+				nfs_inode_return_delegation(inode);
+				exception->retry = 1;
+				return 0;
+			}
+			if (state == NULL)
+				break;
+			nfs4_schedule_stateid_recovery(server, state);
+			goto wait_on_recovery;
 		case -NFS4ERR_DELEG_REVOKED:
 		case -NFS4ERR_ADMIN_REVOKED:
 		case -NFS4ERR_BAD_STATEID:
 			if (state != NULL)
 				nfs_remove_bad_delegation(state->inode);
-		case -NFS4ERR_OPENMODE:
 			if (state == NULL)
 				break;
 			nfs4_schedule_stateid_recovery(server, state);
@@ -1870,6 +1880,7 @@ static int nfs4_do_setattr(struct inode
 	struct nfs_server *server = NFS_SERVER(inode);
 	struct nfs4_exception exception = {
 		.state = state,
+		.inode = inode,
 	};
 	int err;
 	do {
author maintainer
#74 lore raw

PATCH 67/108 xfs: fix inode lookup race

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Chinner <[email protected]>

commit f30d500f809eca67a21704347ab14bb35877b5ee upstream.

When we get concurrent lookups of the same inode that is not in the per-AG inode cache, there is a race condition that triggers warnings in unlock_new_inode() indicating that we are initialising an inode that isn't in a the correct state for a new inode.

When we do an inode lookup via a file handle or a bulkstat, we don't serialise lookups at a higher level through the dentry cache (i.e. pathless lookup), and so we can get concurrent lookups of the same inode.

The race condition is between the insertion of the inode into the cache in the case of a cache miss and a concurrently lookup:

Thread 1 Thread 2
xfs_iget()
xfs_iget_cache_miss()
xfs_iread()
lock radix tree
radix_tree_insert()
rcu_read_lock radix_tree_lookup lock inode flags XFS_INEW not set igrab()
unlock inode flags rcu_read_unlock use uninitialised inode
.....
lock inode flags
set XFS_INEW
unlock inode flags
unlock radix tree
xfs_setup_inode()
inode flags = I_NEW
unlock_new_inode()
WARNING as inode flags != I_NEW

This can lead to inode corruption, inode list corruption, etc, and is generally a bad thing to occur.

Fix this by setting XFS_INEW before inserting the inode into the radix tree. This will ensure any concurrent lookup will find the new inode with XFS_INEW set and that forces the lookup to wait until the XFS_INEW flag is removed before allowing the lookup to succeed.

---
 fs/xfs/xfs_iget.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
fs/xfs/xfs_iget.c +12 -6
@@ -356,9 +356,20 @@ xfs_iget_cache_miss(
 			BUG();
 	}
 
-	spin_lock(&pag->pag_ici_lock);
+	/*
+	 * These values must be set before inserting the inode into the radix
+	 * tree as the moment it is inserted a concurrent lookup (allowed by the
+	 * RCU locking mechanism) can find it and that lookup must see that this
+	 * is an inode currently under construction (i.e. that XFS_INEW is set).
+	 * The ip->i_flags_lock that protects the XFS_INEW flag forms the
+	 * memory barrier that ensures this detection works correctly at lookup
+	 * time.
+	 */
+	ip->i_udquot = ip->i_gdquot = NULL;
+	xfs_iflags_set(ip, XFS_INEW);
 
 	/* insert the new inode */
+	spin_lock(&pag->pag_ici_lock);
 	error = radix_tree_insert(&pag->pag_ici_root, agino, ip);
 	if (unlikely(error)) {
 		WARN_ON(error != -EEXIST);
@@ -366,11 +377,6 @@ xfs_iget_cache_miss(
 		error = EAGAIN;
 		goto out_preload_end;
 	}
-
-	/* These values _must_ be set before releasing the radix tree lock! */
-	ip->i_udquot = ip->i_gdquot = NULL;
-	xfs_iflags_set(ip, XFS_INEW);
-
 	spin_unlock(&pag->pag_ici_lock);
 	radix_tree_preload_end();
 
author maintainer
#75 lore raw

PATCH 68/108 cifs: fix issue mounting of DFS ROOT when redirecting from one domain controller to the next

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeff Layton <[email protected]>

commit 1daaae8fa4afe3df78ca34e724ed7e8187e4eb32 upstream.

This patch fixes an issue when cifs_mount receives a STATUS_BAD_NETWORK_NAME error during cifs_get_tcon but is able to continue after an DFS ROOT referral. In this case, the return code variable is not reset prior to trying to mount from the system referred to. Thus, is_path_accessible is not executed and the final DFS referral is not performed causing a mount error.

Use case: In DNS, example.com resolves to the secondary AD server ad2.example.com Our primary domain controller is ad1.example.com and has a DFS redirection set up from \\ad1\share\Users to \\files\share\Users. Mounting \\example.com\share\Users fails.

Regression introduced by commit 724d9f1.

---
 fs/cifs/connect.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/cifs/connect.c +2 -1
@@ -3004,7 +3004,7 @@ cifs_get_volume_info(char *mount_data, c
 int
 cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info)
 {
-	int rc = 0;
+	int rc;
 	int xid;
 	struct cifs_ses *pSesInfo;
 	struct cifs_tcon *tcon;
@@ -3033,6 +3033,7 @@ try_mount_again:
 		FreeXid(xid);
 	}
 #endif
+	rc = 0;
 	tcon = NULL;
 	pSesInfo = NULL;
 	srvTcp = NULL;
author maintainer
#76 lore raw

PATCH 69/108 UBI: fix error handling in ubi_scan()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <[email protected]>

commit a29852be492d61001d86c6ebf5fff9b93d7b4be9 upstream.

Two bad things can happen in ubi_scan():
1. If kmem_cache_create() fails we jump to out_si and call ubi_scan_destroy_si() which calls kmem_cache_destroy(). But si->scan_leb_slab is NULL.
2. If process_eb() fails we jump to out_vidh, call kmem_cache_destroy() and ubi_scan_destroy_si() which calls again kmem_cache_destroy().

---
 drivers/mtd/ubi/scan.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/mtd/ubi/scan.c +4 -4
@@ -1174,7 +1174,7 @@ struct ubi_scan_info *ubi_scan(struct ub
 
 	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
 	if (!ech)
-		goto out_slab;
+		goto out_si;
 
 	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
 	if (!vidh)
@@ -1235,8 +1235,6 @@ out_vidh:
 	ubi_free_vid_hdr(ubi, vidh);
 out_ech:
 	kfree(ech);
-out_slab:
-	kmem_cache_destroy(si->scan_leb_slab);
 out_si:
 	ubi_scan_destroy_si(si);
 	return ERR_PTR(err);
@@ -1325,7 +1323,9 @@ void ubi_scan_destroy_si(struct ubi_scan
 		}
 	}
 
-	kmem_cache_destroy(si->scan_leb_slab);
+	if (si->scan_leb_slab)
+		kmem_cache_destroy(si->scan_leb_slab);
+
 	kfree(si);
 }
 
author maintainer
#77 lore raw

PATCH 70/108 UBI: fix eraseblock picking criteria

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <[email protected]>

commit 7eb3aa65853e1b223bfc786b023b702018cb76c0 upstream.

The 'find_wl_entry()' function expects the maximum difference as the second argument, not the maximum absolute value. So the "unknown" eraseblock picking was incorrect, as Shmulik Ladkani spotted. This patch fixes the issue.

---
 drivers/mtd/ubi/wl.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/mtd/ubi/wl.c +4 -6
@@ -386,7 +386,7 @@ static struct ubi_wl_entry *find_wl_entr
  */
 int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
 {
-	int err, medium_ec;
+	int err;
 	struct ubi_wl_entry *e, *first, *last;
 
 	ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
@@ -424,7 +424,7 @@ retry:
 		 * For unknown data we pick a physical eraseblock with medium
 		 * erase counter. But we by no means can pick a physical
 		 * eraseblock with erase counter greater or equivalent than the
-		 * lowest erase counter plus %WL_FREE_MAX_DIFF.
+		 * lowest erase counter plus %WL_FREE_MAX_DIFF/2.
 		 */
 		first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry,
 					u.rb);
@@ -433,10 +433,8 @@ retry:
 		if (last->ec - first->ec < WL_FREE_MAX_DIFF)
 			e = rb_entry(ubi->free.rb_node,
 					struct ubi_wl_entry, u.rb);
-		else {
-			medium_ec = (first->ec + WL_FREE_MAX_DIFF)/2;
-			e = find_wl_entry(&ubi->free, medium_ec);
-		}
+		else
+			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF/2);
 		break;
 	case UBI_SHORTTERM:
 		/*
author maintainer
#78 lore raw

PATCH 71/108 SUNRPC: We must not use list_for_each_entry_safe() in rpc_wake_up()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

commit 540a0f7584169651f485e8ab67461fcb06934e38 upstream.

The problem is that for the case of priority queues, we
have to assume that __rpc_remove_wait_queue_priority will move new elements from the tk_wait.links lists into the queue->tasks[] list. We therefore cannot use list_for_each_entry_safe() on queue->tasks[], since that will skip these new tasks that __rpc_remove_wait_queue_priority is adding.

Without this fix, rpc_wake_up and rpc_wake_up_status will both fail to wake up all functions on priority wait queues, which can result in some nasty hangs.

---
 net/sunrpc/sched.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
net/sunrpc/sched.c +11 -4
@@ -480,14 +480,18 @@ EXPORT_SYMBOL_GPL(rpc_wake_up_next);
  */
 void rpc_wake_up(struct rpc_wait_queue *queue)
 {
-	struct rpc_task *task, *next;
 	struct list_head *head;
 
 	spin_lock_bh(&queue->lock);
 	head = &queue->tasks[queue->maxpriority];
 	for (;;) {
-		list_for_each_entry_safe(task, next, head, u.tk_wait.list)
+		while (!list_empty(head)) {
+			struct rpc_task *task;
+			task = list_first_entry(head,
+					struct rpc_task,
+					u.tk_wait.list);
 			rpc_wake_up_task_queue_locked(queue, task);
+		}
 		if (head == &queue->tasks[0])
 			break;
 		head--;
@@ -505,13 +509,16 @@ EXPORT_SYMBOL_GPL(rpc_wake_up);
  */
 void rpc_wake_up_status(struct rpc_wait_queue *queue, int status)
 {
-	struct rpc_task *task, *next;
 	struct list_head *head;
 
 	spin_lock_bh(&queue->lock);
 	head = &queue->tasks[queue->maxpriority];
 	for (;;) {
-		list_for_each_entry_safe(task, next, head, u.tk_wait.list) {
+		while (!list_empty(head)) {
+			struct rpc_task *task;
+			task = list_first_entry(head,
+					struct rpc_task,
+					u.tk_wait.list);
 			task->tk_status = status;
 			rpc_wake_up_task_queue_locked(queue, task);
 		}
author maintainer
#79 lore raw

PATCH 72/108 usbnet: increase URB reference count before usb_unlink_urb

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

commit 0956a8c20b23d429e79ff86d4325583fc06f9eb4 upstream.

Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock, but it makes usb_unlink_urb racing with defer_bh, and the URB to being unlinked may be freed before or during calling usb_unlink_urb, so use-after-free problem may be triggerd inside usb_unlink_urb.

The patch fixes the use-after-free problem by increasing URB reference count with skb queue lock held before calling usb_unlink_urb, so the URB won't be freed until return from usb_unlink_urb.

---
 drivers/net/usb/usbnet.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/usb/usbnet.c +9 -0
@@ -585,6 +585,14 @@ static int unlink_urbs (struct usbnet *d
 		entry = (struct skb_data *) skb->cb;
 		urb = entry->urb;
 
+		/*
+		 * Get reference count of the URB to avoid it to be
+		 * freed during usb_unlink_urb, which may trigger
+		 * use-after-free problem inside usb_unlink_urb since
+		 * usb_unlink_urb is always racing with .complete
+		 * handler(include defer_bh).
+		 */
+		usb_get_urb(urb);
 		spin_unlock_irqrestore(&q->lock, flags);
 		// during some PM-driven resume scenarios,
 		// these (async) unlinks complete immediately
@@ -593,6 +601,7 @@ static int unlink_urbs (struct usbnet *d
 			netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
 		else
 			count++;
+		usb_put_urb(urb);
 		spin_lock_irqsave(&q->lock, flags);
 	}
 	spin_unlock_irqrestore (&q->lock, flags);
author maintainer
#80 lore raw

PATCH 73/108 usbnet: dont clear urb->dev in tx_complete

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "[email protected]" <[email protected]>

commit 5d5440a835710d09f0ef18da5000541ec98b537a upstream.

URB unlinking is always racing with its completion and tx_complete may be called before or during running usb_unlink_urb, so tx_complete must not clear urb->dev since it will be used in unlink path, otherwise invalid memory accesses or usb device leak may be caused inside usb_unlink_urb.

---
 drivers/net/usb/usbnet.c |    1 -
 1 file changed, 1 deletion(-)
drivers/net/usb/usbnet.c +0 -1
@@ -1033,7 +1033,6 @@ static void tx_complete (struct urb *urb
 	}
 
 	usb_autopm_put_interface_async(dev->intf);
-	urb->dev = NULL;
 	entry->state = tx_done;
 	defer_bh(dev, skb, &dev->txq);
 }
author maintainer
#81 lore raw

PATCH 74/108 x86-32: Fix endless loop when processing signals for kernel tasks

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Adamushko <[email protected]>

commit 29a2e2836ff9ea65a603c89df217f4198973a74f upstream.

The problem occurs on !CONFIG_VM86 kernels [1] when a kernel-mode task returns from a system call with a pending signal.

A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot).

The loop is as follows:

* syscall_exit_work:
- work_pending: // start_of_the_loop
- work_notify_sig:
- do_notify_resume()
- do_signal()
- if (!user_mode(regs)) return;
- resume_userspace // TIF_SIGPENDING is still set
- work_pending // so we call work_pending => goto

                            // start_of_the_loop

More information can be found in another LKML thread:
http://www.serverphorums.com/read.php?12,457826

[1] the problem was also seen on MIPS.

---
 arch/x86/kernel/entry_32.S |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
arch/x86/kernel/entry_32.S +10 -7
@@ -98,12 +98,6 @@
 #endif
 .endm
 
-#ifdef CONFIG_VM86
-#define resume_userspace_sig	check_userspace
-#else
-#define resume_userspace_sig	resume_userspace
-#endif
-
 /*
  * User gs save/restore
  *
@@ -327,10 +321,19 @@ ret_from_exception:
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 	GET_THREAD_INFO(%ebp)
-check_userspace:
+resume_userspace_sig:
+#ifdef CONFIG_VM86
 	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
 	movb PT_CS(%esp), %al
 	andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+#else
+	/*
+	 * We can be coming here from a syscall done in the kernel space,
+	 * e.g. a failed kernel_execve().
+	 */
+	movl PT_CS(%esp), %eax
+	andl $SEGMENT_RPL_MASK, %eax
+#endif
 	cmpl $USER_RPL, %eax
 	jb resume_kernel		# not returning to v8086 or userspace
 
author maintainer
#82 lore raw

PATCH 75/108 proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate().

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pravin B Shelar <[email protected]>

commit 1b26c9b334044cff6d1d2698f2be41bc7d9a0864 upstream.

The namespace cleanup path leaks a dentry which holds a reference count on a network namespace. Keeping that network namespace from being freed when the last user goes away. Leaving things like vlan devices in the leaked network namespace.

If you use ip netns add for much real work this problem becomes apparent pretty quickly. It light testing the problem hides because frequently you simply don't notice the leak.

Use d_set_d_op() so that DCACHE_OP_* flags are set correctly.

This issue exists back to 3.0.

---
 fs/proc/namespaces.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/proc/namespaces.c +1 -1
@@ -54,7 +54,7 @@ static struct dentry *proc_ns_instantiat
 	ei->ns_ops    = ns_ops;
 	ei->ns	      = ns;
 
-	dentry->d_op = &pid_dentry_operations;
+	d_set_d_op(dentry, &pid_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
 	if (pid_revalidate(dentry, NULL))
author maintainer
#83 lore raw

PATCH 76/108 hwmon: (fam15h_power) Correct sign extension of running_avg_capture

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Herrmann <[email protected]>

commit fc0900cbda9243957d812cd6b4cc87965f9fe75f upstream.

Wrong bit was used for sign extension which caused wrong end results. Thanks to Andre for spotting this bug.

---
 drivers/hwmon/fam15h_power.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/fam15h_power.c +1 -1
@@ -60,7 +60,7 @@ static ssize_t show_power(struct device
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_RUNNING_AVERAGE, &val);
 	running_avg_capture = (val >> 4) & 0x3fffff;
-	running_avg_capture = sign_extend32(running_avg_capture, 22);
+	running_avg_capture = sign_extend32(running_avg_capture, 21);
 	running_avg_range = val & 0xf;
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
author maintainer
#84 lore raw

PATCH 77/108 lgdt330x: fix signedness error in i2c_read_demod_bytes()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xi Wang <[email protected]>

commit 34817174fca0c5512c2d5b6ea0fc37a0337ce1d8 upstream.

The error handling in lgdt3303_read_status() and lgdt330x_read_ucblocks() doesn't work, because i2c_read_demod_bytes() returns a u8 and (err < 0) is always false.

        err = i2c_read_demod_bytes(state, 0x58, buf, 1);
        if (err < 0)
                return err;

Change the return type of i2c_read_demod_bytes() to int. Also change the return value on error to -EIO to make (err < 0) work.

---
 drivers/media/dvb/frontends/lgdt330x.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/dvb/frontends/lgdt330x.c +4 -2
@@ -104,8 +104,8 @@ static int i2c_write_demod_bytes (struct
  * then reads the data returned for (len) bytes.
  */
 
-static u8 i2c_read_demod_bytes (struct lgdt330x_state* state,
-			       enum I2C_REG reg, u8* buf, int len)
+static int i2c_read_demod_bytes(struct lgdt330x_state *state,
+				enum I2C_REG reg, u8 *buf, int len)
 {
 	u8 wr [] = { reg };
 	struct i2c_msg msg [] = {
@@ -118,6 +118,8 @@ static u8 i2c_read_demod_bytes (struct l
 	ret = i2c_transfer(state->i2c, msg, 2);
 	if (ret != 2) {
 		printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret);
+		if (ret >= 0)
+			ret = -EIO;
 	} else {
 		ret = 0;
 	}
author maintainer
#85 lore raw

PATCH 78/108 pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Krufky <[email protected]>

commit 9ab2393fc3e460cd2040de1483918eb17abb822f upstream.

The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner instead of a tda18271c1 tuner as used in revision D1E9. To account for this, we must hardcode the frontend configuration to use the same IF frequency configuration for both revisions of the device.

6MHz DVB-T is unaffected by this issue, as the recommended IF Frequency configuration for 6MHz DVB-T is the same on both c1 and c2 revisions of the tda18271 tuner.

---
 drivers/media/video/pvrusb2/pvrusb2-devattr.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/media/video/pvrusb2/pvrusb2-devattr.c +10 -0
@@ -319,7 +319,17 @@ static struct tda829x_config tda829x_no_
 	.probe_tuner = TDA829X_DONT_PROBE,
 };
 
+static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
+        .dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+                      .if_lvl = 1, .rfagc_top = 0x37, },
+        .dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+                      .if_lvl = 1, .rfagc_top = 0x37, },
+        .dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+                      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config hauppauge_tda18271_dvb_config = {
+	.std_map = &hauppauge_tda18271_dvbt_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
author maintainer
#86 lore raw

PATCH 79/108 e1000e: Avoid wrong check on TX hang

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeff Kirsher <[email protected]>

commit 09357b00255c233705b1cf6d76a8d147340545b8 upstream.

Based on the original patch submitted my Michael Wang <[email protected]>.
Descriptors may not be write-back while checking TX hang with flag FLAG2_DMA_BURST on.
So when we detect hang, we just flush the descriptor and detect again for once.

-v2 change 1 to true and 0 to false and remove extra ()

---
 drivers/net/e1000e/e1000.h  |    1 +
 drivers/net/e1000e/netdev.c |   23 ++++++++++++++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/net/e1000e/e1000.h +1 -0
@@ -311,6 +311,7 @@ struct e1000_adapter {
 	u32 txd_cmd;
 
 	bool detect_tx_hung;
+	bool tx_hang_recheck;
 	u8 tx_timeout_factor;
 
 	u32 tx_int_delay;
drivers/net/e1000e/netdev.c +20 -3
@@ -930,6 +930,7 @@ static void e1000_print_hw_hang(struct w
 	struct e1000_adapter *adapter = container_of(work,
 	                                             struct e1000_adapter,
 	                                             print_hang_task);
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
@@ -941,6 +942,21 @@ static void e1000_print_hw_hang(struct w
 	if (test_bit(__E1000_DOWN, &adapter->state))
 		return;
 
+	if (!adapter->tx_hang_recheck &&
+	    (adapter->flags2 & FLAG2_DMA_BURST)) {
+		/* May be block on write-back, flush and detect again
+		 * flush pending descriptor writebacks to memory
+		 */
+		ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+		/* execute the writes immediately */
+		e1e_flush();
+		adapter->tx_hang_recheck = true;
+		return;
+	}
+	/* Real hang detected */
+	adapter->tx_hang_recheck = false;
+	netif_stop_queue(netdev);
+
 	e1e_rphy(hw, PHY_STATUS, &phy_status);
 	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
 	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
@@ -1054,10 +1070,10 @@ static bool e1000_clean_tx_irq(struct e1
 		if (tx_ring->buffer_info[i].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp
 			       + (adapter->tx_timeout_factor * HZ)) &&
-		    !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+		    !(er32(STATUS) & E1000_STATUS_TXOFF))
 			schedule_work(&adapter->print_hang_task);
-			netif_stop_queue(netdev);
-		}
+		else
+			adapter->tx_hang_recheck = false;
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
@@ -3678,6 +3694,7 @@ static int e1000_open(struct net_device
 
 	e1000_irq_enable(adapter);
 
+	adapter->tx_hang_recheck = false;
 	netif_start_queue(netdev);
 
 	adapter->idle_check = true;
author maintainer
#87 lore raw

PATCH 80/108 PM / Hibernate: Enable usermodehelpers in hibernate() error path

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Srivatsa S. Bhat" <[email protected]>

commit 05b4877f6a4f1ba4952d1222213d262bf8c132b7 upstream.

If create_basic_memory_bitmaps() fails, usermodehelpers are not re-enabled before returning. Fix this. And while at it, reword the goto labels so that they look more meaningful.

---
 kernel/power/hibernate.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
kernel/power/hibernate.c +4 -3
@@ -623,7 +623,7 @@ int hibernate(void)
 	/* Allocate memory management structures */
 	error = create_basic_memory_bitmaps();
 	if (error)
-		goto Exit;
+		goto Enable_umh;
 
 	printk(KERN_INFO "PM: Syncing filesystems ... ");
 	sys_sync();
@@ -631,7 +631,7 @@ int hibernate(void)
 
 	error = prepare_processes();
 	if (error)
-		goto Finish;
+		goto Free_bitmaps;
 
 	if (hibernation_test(TEST_FREEZER))
 		goto Thaw;
@@ -663,8 +663,9 @@ int hibernate(void)
 
  Thaw:
 	thaw_processes();
- Finish:
+ Free_bitmaps:
 	free_basic_memory_bitmaps();
+ Enable_umh:
 	usermodehelper_enable();
  Exit:
 	pm_notifier_call_chain(PM_POST_HIBERNATION);
author maintainer
#88 lore raw

PATCH 81/108 ext4: flush any pending end_io requests before DIO reads w/dioread_nolock

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiaying Zhang <[email protected]>

commit dccaf33fa37a1bc5d651baeb3bfeb6becb86597b upstream.

(backported to 3.0 by mjt)

There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data.

This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents.

---
 fs/ext4/inode.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
fs/ext4/inode.c +7 -2
@@ -3510,12 +3510,17 @@ static ssize_t ext4_ind_direct_IO(int rw
 	}
 
 retry:
-	if (rw == READ && ext4_should_dioread_nolock(inode))
+	if (rw == READ && ext4_should_dioread_nolock(inode)) {
+		if (unlikely(!list_empty(&ei->i_completed_io_list))) {
+			mutex_lock(&inode->i_mutex);
+			ext4_flush_completed_IO(inode);
+			mutex_unlock(&inode->i_mutex);
+		}
 		ret = __blockdev_direct_IO(rw, iocb, inode,
 				 inode->i_sb->s_bdev, iov,
 				 offset, nr_segs,
 				 ext4_get_block, NULL, NULL, 0);
-	else {
+	} else {
 		ret = blockdev_direct_IO(rw, iocb, inode,
 				 inode->i_sb->s_bdev, iov,
 				 offset, nr_segs,
author maintainer
#89 lore raw

PATCH 82/108 jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <[email protected]>

commit 15291164b22a357cb211b618adfef4fa82fc0de3 upstream.

journal_unmap_buffer()'s zap_buffer: code clears a lot of buffer head state ala discard_buffer(), but does not touch _Delay or _Unwritten as discard_buffer() does.

This can be problematic in some areas of the ext4 code which assume that if they have found a buffer marked unwritten or delay, then it's a live one. Perhaps those spots should check whether it is mapped as well, but if jbd2 is going to tear down a buffer, let's really tear it down completely.

Without this I get some fsx failures on sub-page-block filesystems up until v3.2, at which point 4e96b2dbbf1d7e81f22047a50f862555a6cb87cb and 189e868fa8fdca702eb9db9d8afc46b5cb9144c9 make the failures go away, because buried within that large change is some more flag clearing. I still think it's worth doing in jbd2, since ->invalidatepage leads here directly, and it's the right place to clear away these flags.

---
 fs/jbd2/transaction.c |    2 ++
 1 file changed, 2 insertions(+)
fs/jbd2/transaction.c +2 -0
@@ -1902,6 +1902,8 @@ zap_buffer_unlocked:
 	clear_buffer_mapped(bh);
 	clear_buffer_req(bh);
 	clear_buffer_new(bh);
+	clear_buffer_delay(bh);
+	clear_buffer_unwritten(bh);
 	bh->b_bdev = NULL;
 	return may_free;
 }
author maintainer
#90 lore raw

PATCH 83/108 ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <[email protected]>

commit 3d2b158262826e8b75bbbfb7b97010838dd92ac7 upstream.

Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands:

mkfs.ext4 /dev/sdd
mount /dev/sdd /mnt/test1
dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file
dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file

Additionally it can be reproduced quite reliably with xfstests 272 and
269. In fact the above reproducer is a part of test 272.

To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled).

Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read.

Successfully tested with xfstests in following configurations:

delalloc + data=ordered
delalloc + data=writeback
data=journal
nodelalloc + data=ordered
nodelalloc + data=writeback
nodelalloc + data=journal

---
 fs/ext4/ext4_jbd2.h |   56 ++++++++++++++++++++++++++--------------------------
 fs/ext4/inode.c     |   36 ++++++++++++++++++++-------------
 2 files changed, 51 insertions(+), 41 deletions(-)
fs/ext4/ext4_jbd2.h +29 -27
@@ -261,43 +261,45 @@ static inline void ext4_update_inode_fsy
 /* super.c */
 int ext4_force_commit(struct super_block *sb);
 
-static inline int ext4_should_journal_data(struct inode *inode)
+/*
+ * Ext4 inode journal modes
+ */
+#define EXT4_INODE_JOURNAL_DATA_MODE	0x01 /* journal data mode */
+#define EXT4_INODE_ORDERED_DATA_MODE	0x02 /* ordered data mode */
+#define EXT4_INODE_WRITEBACK_DATA_MODE	0x04 /* writeback data mode */
+
+static inline int ext4_inode_journal_mode(struct inode *inode)
 {
 	if (EXT4_JOURNAL(inode) == NULL)
-		return 0;
-	if (!S_ISREG(inode->i_mode))
-		return 1;
-	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
-		return 1;
-	if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
-		return 1;
-	return 0;
+		return EXT4_INODE_WRITEBACK_DATA_MODE;	/* writeback */
+	/* We do not support data journalling with delayed allocation */
+	if (!S_ISREG(inode->i_mode) ||
+	    test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
+		return EXT4_INODE_JOURNAL_DATA_MODE;	/* journal data */
+	if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA) &&
+	    !test_opt(inode->i_sb, DELALLOC))
+		return EXT4_INODE_JOURNAL_DATA_MODE;	/* journal data */
+	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
+		return EXT4_INODE_ORDERED_DATA_MODE;	/* ordered */
+	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
+		return EXT4_INODE_WRITEBACK_DATA_MODE;	/* writeback */
+	else
+		BUG();
+}
+
+static inline int ext4_should_journal_data(struct inode *inode)
+{
+	return ext4_inode_journal_mode(inode) & EXT4_INODE_JOURNAL_DATA_MODE;
 }
 
 static inline int ext4_should_order_data(struct inode *inode)
 {
-	if (EXT4_JOURNAL(inode) == NULL)
-		return 0;
-	if (!S_ISREG(inode->i_mode))
-		return 0;
-	if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
-		return 0;
-	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
-		return 1;
-	return 0;
+	return ext4_inode_journal_mode(inode) & EXT4_INODE_ORDERED_DATA_MODE;
 }
 
 static inline int ext4_should_writeback_data(struct inode *inode)
 {
-	if (EXT4_JOURNAL(inode) == NULL)
-		return 1;
-	if (!S_ISREG(inode->i_mode))
-		return 0;
-	if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
-		return 0;
-	if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
-		return 1;
-	return 0;
+	return ext4_inode_journal_mode(inode) & EXT4_INODE_WRITEBACK_DATA_MODE;
 }
 
 /*
fs/ext4/inode.c +22 -14
@@ -3212,13 +3212,14 @@ static int ext4_da_write_end(struct file
 	int write_mode = (int)(unsigned long)fsdata;
 
 	if (write_mode == FALL_BACK_TO_NONDELALLOC) {
-		if (ext4_should_order_data(inode)) {
+		switch (ext4_inode_journal_mode(inode)) {
+		case EXT4_INODE_ORDERED_DATA_MODE:
 			return ext4_ordered_write_end(file, mapping, pos,
 					len, copied, page, fsdata);
-		} else if (ext4_should_writeback_data(inode)) {
+		case EXT4_INODE_WRITEBACK_DATA_MODE:
 			return ext4_writeback_write_end(file, mapping, pos,
 					len, copied, page, fsdata);
-		} else {
+		default:
 			BUG();
 		}
 	}
@@ -3918,18 +3919,25 @@ static const struct address_space_operat
 
 void ext4_set_aops(struct inode *inode)
 {
-	if (ext4_should_order_data(inode) &&
-		test_opt(inode->i_sb, DELALLOC))
-		inode->i_mapping->a_ops = &ext4_da_aops;
-	else if (ext4_should_order_data(inode))
-		inode->i_mapping->a_ops = &ext4_ordered_aops;
-	else if (ext4_should_writeback_data(inode) &&
-		 test_opt(inode->i_sb, DELALLOC))
-		inode->i_mapping->a_ops = &ext4_da_aops;
-	else if (ext4_should_writeback_data(inode))
-		inode->i_mapping->a_ops = &ext4_writeback_aops;
-	else
+	switch (ext4_inode_journal_mode(inode)) {
+	case EXT4_INODE_ORDERED_DATA_MODE:
+		if (test_opt(inode->i_sb, DELALLOC))
+			inode->i_mapping->a_ops = &ext4_da_aops;
+		else
+			inode->i_mapping->a_ops = &ext4_ordered_aops;
+		break;
+	case EXT4_INODE_WRITEBACK_DATA_MODE:
+		if (test_opt(inode->i_sb, DELALLOC))
+			inode->i_mapping->a_ops = &ext4_da_aops;
+		else
+			inode->i_mapping->a_ops = &ext4_writeback_aops;
+		break;
+	case EXT4_INODE_JOURNAL_DATA_MODE:
 		inode->i_mapping->a_ops = &ext4_journalled_aops;
+		break;
+	default:
+		BUG();
+	}
 }
 
 /*
author maintainer
#91 lore raw

PATCH 84/108 ext4: check for zero length extent

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <[email protected]>

commit 31d4f3a2f3c73f279ff96a7135d7202ef6833f12 upstream.

Explicitly test for an extent whose length is zero, and flag that as a corrupted extent.

This avoids a kernel BUG_ON assertion failure.

Tested: Without this patch, the file system image found in tests/f_ext_zero_len/image.gz in the latest e2fsprogs sources causes a kernel panic. With this patch, an ext4 file system error is noted instead, and the file system is marked as being corrupted.

https://bugzilla.kernel.org/show_bug.cgi?id=42859

---
 fs/ext4/extents.c |    2 ++
 1 file changed, 2 insertions(+)
fs/ext4/extents.c +2 -0
@@ -341,6 +341,8 @@ static int ext4_valid_extent(struct inod
 	ext4_fsblk_t block = ext4_ext_pblock(ext);
 	int len = ext4_ext_get_actual_len(ext);
 
+	if (len == 0)
+		return 0;
 	return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len);
 }
 
author maintainer
#92 lore raw

PATCH 85/108 vfs: fix d_ancestor() case in d_materialize_unique

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michel Lespinasse <[email protected]>

commit b18dafc86bb879d2f38a1743985d7ceb283c2f4d upstream.

In d_materialise_unique() there are 3 subcases to the 'aliased dentry' case; in two subcases the inode i_lock is properly released but this does not occur in the -ELOOP subcase.

This seems to have been introduced by commit 1836750115f2 ("fix loop checks in d_materialise_unique()").

[ Added a comment, and moved the unlock to where we generate the -ELOOP,
which seems to be more natural.

You probably can't actually trigger this without a buggy network file server - d_materialize_unique() is for finding aliases on non-local filesystems, and the d_ancestor() case is for a hardlinked directory loop.

But we should be robust in the case of such buggy servers anyway. ]

---
 fs/dcache.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/dcache.c +2 -1
@@ -2433,6 +2433,7 @@ struct dentry *d_materialise_unique(stru
 			if (d_ancestor(alias, dentry)) {
 				/* Check for loops */
 				actual = ERR_PTR(-ELOOP);
+				spin_unlock(&inode->i_lock);
 			} else if (IS_ROOT(alias)) {
 				/* Is this an anonymous mountpoint that we
 				 * could splice into our tree? */
@@ -2442,7 +2443,7 @@ struct dentry *d_materialise_unique(stru
 				goto found;
 			} else {
 				/* Nope, but we must(!) avoid directory
-				 * aliasing */
+				 * aliasing. This drops inode->i_lock */
 				actual = __d_unalias(inode, dentry, alias);
 			}
 			write_sequnlock(&rename_lock);
author maintainer
#93 lore raw

PATCH 86/108 udf: Fix deadlock in udf_release_file()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit a0391a3ae91d301c0e59368531a4de5f0b122bcf upstream.

udf_release_file() can be called from munmap() path with mmap_sem held. Thus we cannot take i_mutex there because that ranks above mmap_sem. Luckily, i_mutex is not needed in udf_release_file() anymore since protection by i_data_sem is enough to protect from races with write and truncate.

---
 fs/udf/file.c |    2 --
 1 file changed, 2 deletions(-)
fs/udf/file.c +0 -2
@@ -201,12 +201,10 @@ out:
 static int udf_release_file(struct inode *inode, struct file *filp)
 {
 	if (filp->f_mode & FMODE_WRITE) {
-		mutex_lock(&inode->i_mutex);
 		down_write(&UDF_I(inode)->i_data_sem);
 		udf_discard_prealloc(inode);
 		udf_truncate_tail_extent(inode);
 		up_write(&UDF_I(inode)->i_data_sem);
-		mutex_unlock(&inode->i_mutex);
 	}
 	return 0;
 }
author maintainer
#94 lore raw

PATCH 87/108 dm crypt: fix mempool deadlock

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit aeb2deae2660a1773c83d3c6e9e6575daa3855d6 upstream.

This patch fixes a possible deadlock in dm-crypt's mempool use.

Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing.

Because allocations may be done in parallel, this code can deadlock. Example:
There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously.
It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens.

To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail.

---
 drivers/md/dm-crypt.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/md/dm-crypt.c +4 -6
@@ -177,7 +177,6 @@ struct crypt_config {
 
 #define MIN_IOS        16
 #define MIN_POOL_PAGES 32
-#define MIN_BIO_PAGES  8
 
 static struct kmem_cache *_crypt_io_pool;
 
@@ -849,12 +848,11 @@ static struct bio *crypt_alloc_buffer(st
 		}
 
 		/*
-		 * if additional pages cannot be allocated without waiting,
-		 * return a partially allocated bio, the caller will then try
-		 * to allocate additional bios while submitting this partial bio
+		 * If additional pages cannot be allocated without waiting,
+		 * return a partially-allocated bio.  The caller will then try
+		 * to allocate more bios while submitting this partial bio.
 		 */
-		if (i == (MIN_BIO_PAGES - 1))
-			gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT;
+		gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT;
 
 		len = (size > PAGE_SIZE) ? PAGE_SIZE : size;
 
author maintainer
#95 lore raw

PATCH 88/108 dm crypt: add missing error handling

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit 72c6e7afc43e19f68a31dea204fc366624d6eee9 upstream.

Always set io->error to -EIO when an error is detected in dm-crypt.

There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened.

This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done.

---
 drivers/md/dm-crypt.c |   28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)
drivers/md/dm-crypt.c +16 -12
@@ -1045,16 +1045,14 @@ static void kcryptd_queue_io(struct dm_c
 	queue_work(cc->io_queue, &io->work);
 }
 
-static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io,
-					  int error, int async)
+static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io, int async)
 {
 	struct bio *clone = io->ctx.bio_out;
 	struct crypt_config *cc = io->target->private;
 
-	if (unlikely(error < 0)) {
+	if (unlikely(io->error < 0)) {
 		crypt_free_buffer_pages(cc, clone);
 		bio_put(clone);
-		io->error = -EIO;
 		crypt_dec_pending(io);
 		return;
 	}
@@ -1105,12 +1103,16 @@ static void kcryptd_crypt_write_convert(
 		sector += bio_sectors(clone);
 
 		crypt_inc_pending(io);
+
 		r = crypt_convert(cc, &io->ctx);
+		if (r < 0)
+			io->error = -EIO;
+
 		crypt_finished = atomic_dec_and_test(&io->ctx.pending);
 
 		/* Encryption was already finished, submit io now */
 		if (crypt_finished) {
-			kcryptd_crypt_write_io_submit(io, r, 0);
+			kcryptd_crypt_write_io_submit(io, 0);
 
 			/*
 			 * If there was an error, do not try next fragments.
@@ -1161,11 +1163,8 @@ static void kcryptd_crypt_write_convert(
 	crypt_dec_pending(io);
 }
 
-static void kcryptd_crypt_read_done(struct dm_crypt_io *io, int error)
+static void kcryptd_crypt_read_done(struct dm_crypt_io *io)
 {
-	if (unlikely(error < 0))
-		io->error = -EIO;
-
 	crypt_dec_pending(io);
 }
 
@@ -1180,9 +1179,11 @@ static void kcryptd_crypt_read_convert(s
 			   io->sector);
 
 	r = crypt_convert(cc, &io->ctx);
+	if (r < 0)
+		io->error = -EIO;
 
 	if (atomic_dec_and_test(&io->ctx.pending))
-		kcryptd_crypt_read_done(io, r);
+		kcryptd_crypt_read_done(io);
 
 	crypt_dec_pending(io);
 }
@@ -1203,15 +1204,18 @@ static void kcryptd_async_done(struct cr
 	if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post)
 		error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq);
 
+	if (error < 0)
+		io->error = -EIO;
+
 	mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool);
 
 	if (!atomic_dec_and_test(&ctx->pending))
 		return;
 
 	if (bio_data_dir(io->base_bio) == READ)
-		kcryptd_crypt_read_done(io, error);
+		kcryptd_crypt_read_done(io);
 	else
-		kcryptd_crypt_write_io_submit(io, error, 1);
+		kcryptd_crypt_write_io_submit(io, 1);
 }
 
 static void kcryptd_crypt(struct work_struct *work)
author maintainer
#96 lore raw

PATCH 89/108 dm exception store: fix init error path

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrei Warkentin <[email protected]>

commit aadbe266f2f89ccc68b52f4effc7b3a8b29521ef upstream.

Call the correct exit function on failure in dm_exception_store_init.

---
 drivers/md/dm-exception-store.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/dm-exception-store.c +1 -1
@@ -282,7 +282,7 @@ int dm_exception_store_init(void)
 	return 0;
 
 persistent_fail:
-	dm_persistent_snapshot_exit();
+	dm_transient_snapshot_exit();
 transient_fail:
 	return r;
 }
author maintainer
#97 lore raw

PATCH 90/108 backlight: fix typo in tosa_lcd.c

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masanari Iida <[email protected]>

commit 8da00edc1069f01c34510fa405dc15d96c090a3f upstream.

Fix typo in drivers/video/backlight/tosa_lcd.c
"tosa_lcd_reume" should be "tosa_lcd_resume".

---
 drivers/video/backlight/tosa_lcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/backlight/tosa_lcd.c +1 -1
@@ -271,7 +271,7 @@ static int tosa_lcd_resume(struct spi_de
 }
 #else
 #define tosa_lcd_suspend	NULL
-#define tosa_lcd_reume NULL
+#define tosa_lcd_resume NULL
 #endif
 
 static struct spi_driver tosa_lcd_driver = {
author maintainer
#98 lore raw

PATCH 91/108 xfs: Fix oops on IO error during xlog_recover_process_iunlinks()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit d97d32edcd732110758799ae60af725e5110b3dc upstream.

When an IO error happens during inode deletion run from xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not count with the fact that read of a buffer which was read a while ago can really fail which results in the oops on
agi = XFS_BUF_TO_AGI(agibp);

Fix the problem by cleaning up the buffer handling in xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer lock but keep buffer reference to AG buffer. That is enough for buffer to stay pinned in memory and we don't have to call xfs_read_agi() all the time.

---
 fs/xfs/xfs_log_recover.c |   33 +++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)
fs/xfs/xfs_log_recover.c +11 -22
@@ -3159,37 +3159,26 @@ xlog_recover_process_iunlinks(
 			 */
 			continue;
 		}
+		/*
+		 * Unlock the buffer so that it can be acquired in the normal
+		 * course of the transaction to truncate and free each inode.
+		 * Because we are not racing with anyone else here for the AGI
+		 * buffer, we don't even need to hold it locked to read the
+		 * initial unlinked bucket entries out of the buffer. We keep
+		 * buffer reference though, so that it stays pinned in memory
+		 * while we need the buffer.
+		 */
 		agi = XFS_BUF_TO_AGI(agibp);
+		xfs_buf_unlock(agibp);
 
 		for (bucket = 0; bucket < XFS_AGI_UNLINKED_BUCKETS; bucket++) {
 			agino = be32_to_cpu(agi->agi_unlinked[bucket]);
 			while (agino != NULLAGINO) {
-				/*
-				 * Release the agi buffer so that it can
-				 * be acquired in the normal course of the
-				 * transaction to truncate and free the inode.
-				 */
-				xfs_buf_relse(agibp);
-
 				agino = xlog_recover_process_one_iunlink(mp,
 							agno, agino, bucket);
-
-				/*
-				 * Reacquire the agibuffer and continue around
-				 * the loop. This should never fail as we know
-				 * the buffer was good earlier on.
-				 */
-				error = xfs_read_agi(mp, NULL, agno, &agibp);
-				ASSERT(error == 0);
-				agi = XFS_BUF_TO_AGI(agibp);
 			}
 		}
-
-		/*
-		 * Release the buffer for the current agi so we can
-		 * go on to the next one.
-		 */
-		xfs_buf_relse(agibp);
+		xfs_buf_rele(agibp);
 	}
 
 	mp->m_dmevmask = mp_dmevmask;
author maintainer
#99 lore raw

PATCH 92/108 slub: Do not hold slub_lock when calling sysfs_slab_add()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Lameter <[email protected]>

commit 66c4c35c6bc5a1a452b024cf0364635b28fd94e4 upstream.

sysfs_slab_add() calls various sysfs functions that actually may end up in userspace doing all sorts of things.

Release the slub_lock after adding the kmem_cache structure to the list. At that point the address of the kmem_cache is not known so we are guaranteed exlusive access to the following modifications to the kmem_cache structure.

If the sysfs_slab_add fails then reacquire the slub_lock to remove the kmem_cache structure from the list.

---
 mm/slub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
mm/slub.c +2 -1
@@ -3439,13 +3439,14 @@ struct kmem_cache *kmem_cache_create(con
 		if (kmem_cache_open(s, n,
 				size, align, flags, ctor)) {
 			list_add(&s->list, &slab_caches);
+			up_write(&slub_lock);
 			if (sysfs_slab_add(s)) {
+				down_write(&slub_lock);
 				list_del(&s->list);
 				kfree(n);
 				kfree(s);
 				goto err;
 			}
-			up_write(&slub_lock);
 			return s;
 		}
 		kfree(n);
author maintainer
#100 lore raw

PATCH 93/108 module: Remove module size limit

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sasha Levin <[email protected]>

commit f946eeb9313ff1470758e171a60fe7438a2ded3f upstream.

Module size was limited to 64MB, this was legacy limitation due to vmalloc() which was removed a while ago.

Limiting module size to 64MB is both pointless and affects real world use cases.

---
 kernel/module.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
kernel/module.c +1 -2
@@ -2290,8 +2290,7 @@ static int copy_and_check(struct load_in
 		return -ENOEXEC;
 
 	/* Suck in entire file: we'll want most of it. */
-	/* vmalloc barfs on "unusual" numbers.  Check here */
-	if (len > 64 * 1024 * 1024 || (hdr = vmalloc(len)) == NULL)
+	if ((hdr = vmalloc(len)) == NULL)
 		return -ENOMEM;
 
 	if (copy_from_user(hdr, umod, len) != 0) {
author maintainer
#101 lore raw

PATCH 94/108 Bluetooth: btusb: fix bInterval for high/super speed isochronous endpoints

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bing Zhao <[email protected]>

commit fa0fb93f2ac308a76fa64eb57c18511dadf97089 upstream.

For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB.

---
 drivers/bluetooth/btusb.c |    9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
drivers/bluetooth/btusb.c +2 -7
@@ -498,15 +498,10 @@ static int btusb_submit_isoc_urb(struct
 
 	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
 
-	urb->dev      = data->udev;
-	urb->pipe     = pipe;
-	urb->context  = hdev;
-	urb->complete = btusb_isoc_complete;
-	urb->interval = data->isoc_rx_ep->bInterval;
+	usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
+				hdev, data->isoc_rx_ep->bInterval);
 
 	urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP;
-	urb->transfer_buffer = buf;
-	urb->transfer_buffer_length = size;
 
 	__fill_isoc_descriptor(urb, size,
 			le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
author maintainer
#102 lore raw

PATCH 95/108 drm/i915: suspend fbdev device around suspend/hibernate

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Airlie <[email protected]>

commit 3fa016a0b5c5237e9c387fc3249592b2cb5391c6 upstream.

Looking at hibernate overwriting I though it looked like a cursor, so I tracked down this missing piece to stop the cursor blink timer. I've no idea if this is sufficient to fix the hibernate problems people are seeing, but please test it.

Both radeon and nouveau have done this for a long time.

I've run this personally all night hib/resume cycles with no fails.

Reported-by Lots of misc segfaults after hibernate across the world.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142

---
 drivers/gpu/drm/i915/i915_drv.c  |    7 +++++++
 drivers/gpu/drm/i915/intel_drv.h |    2 +-
 drivers/gpu/drm/i915/intel_fb.c  |   10 ++++++++++
 3 files changed, 18 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.c +7 -0
@@ -379,6 +379,10 @@ static int i915_drm_freeze(struct drm_de
 	/* Modeset on resume, not lid events */
 	dev_priv->modeset_on_lid = 0;
 
+	console_lock();
+	intel_fbdev_set_suspend(dev, 1);
+	console_unlock();
+
 	return 0;
 }
 
@@ -448,6 +452,9 @@ static int i915_drm_thaw(struct drm_devi
 
 	dev_priv->modeset_on_lid = 0;
 
+	console_lock();
+	intel_fbdev_set_suspend(dev, 0);
+	console_unlock();
 	return error;
 }
 
drivers/gpu/drm/i915/intel_drv.h +1 -1
@@ -330,7 +330,7 @@ extern int intel_framebuffer_init(struct
 				  struct drm_i915_gem_object *obj);
 extern int intel_fbdev_init(struct drm_device *dev);
 extern void intel_fbdev_fini(struct drm_device *dev);
-
+extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
 extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
 extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
 extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
drivers/gpu/drm/i915/intel_fb.c +10 -0
@@ -257,6 +257,16 @@ void intel_fbdev_fini(struct drm_device
 	kfree(dev_priv->fbdev);
 	dev_priv->fbdev = NULL;
 }
+
+void intel_fbdev_set_suspend(struct drm_device *dev, int state)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	if (!dev_priv->fbdev)
+		return;
+
+	fb_set_suspend(dev_priv->fbdev->helper.fbdev, state);
+}
+
 MODULE_LICENSE("GPL and additional rights");
 
 void intel_fb_output_poll_changed(struct drm_device *dev)
author maintainer
#103 lore raw

PATCH 96/108 Fix pppol2tp getsockname()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin LaHaise <[email protected]>

[ Upstream commit bbdb32cb5b73597386913d052165423b9d736145 ]

While testing L2TP functionality, I came across a bug in getsockname(). The IP address returned within the pppol2tp_addr's addr memember was not being set to the IP address in use. This bug is caused by using inet_sk() on the wrong socket (the L2TP socket rather than the underlying UDP socket), and was likely introduced during the addition of L2TPv3 support.

---
 net/l2tp/l2tp_ppp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/l2tp/l2tp_ppp.c +1 -1
@@ -908,7 +908,7 @@ static int pppol2tp_getname(struct socke
 		goto end_put_sess;
 	}
 
-	inet = inet_sk(sk);
+	inet = inet_sk(tunnel->sock);
 	if (tunnel->version == 2) {
 		struct sockaddr_pppol2tp sp;
 		len = sizeof(sp);
author maintainer
#104 lore raw

PATCH 97/108 net: bpf_jit: fix BPF_S_LDX_B_MSH compilation

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit dc72d99dabb870ca5bd6d9fff674be853bb4a88d ]

Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction.

We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer()

Reference: http://lists.openwall.net/netdev/2011/07/19/11

Thanks to Indan Zupancic to bring back this issue.

---
 arch/x86/net/bpf_jit_comp.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
arch/x86/net/bpf_jit_comp.c +5 -9
@@ -475,8 +475,10 @@ void bpf_jit_compile(struct sk_filter *f
 			case BPF_S_LD_W_ABS:
 				func = sk_load_word;
 common_load:			seen |= SEEN_DATAREF;
-				if ((int)K < 0)
+				if ((int)K < 0) {
+					/* Abort the JIT because __load_pointer() is needed. */
 					goto out;
+				}
 				t_offset = func - (image + addrs[i]);
 				EMIT1_off32(0xbe, K); /* mov imm32,%esi */
 				EMIT1_off32(0xe8, t_offset); /* call */
@@ -489,14 +491,8 @@ common_load:			seen |= SEEN_DATAREF;
 				goto common_load;
 			case BPF_S_LDX_B_MSH:
 				if ((int)K < 0) {
-					if (pc_ret0 > 0) {
-						/* addrs[pc_ret0 - 1] is the start address */
-						EMIT_JMP(addrs[pc_ret0 - 1] - addrs[i]);
-						break;
-					}
-					CLEAR_A();
-					EMIT_JMP(cleanup_addr - addrs[i]);
-					break;
+					/* Abort the JIT because __load_pointer() is needed. */
+					goto out;
 				}
 				seen |= SEEN_DATAREF | SEEN_XREG;
 				t_offset = sk_load_byte_msh - (image + addrs[i]);
author maintainer
#105 lore raw

PATCH 98/108 net: fix a potential rcu_read_lock() imbalance in rt6_fill_node()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 94f826b8076e2cb92242061e92f21b5baa3eccc2 ]

Commit f2c31e32b378 (net: fix NULL dereferences in check_peer_redir() ) added a regression in rt6_fill_node(), leading to rcu_read_lock() imbalance.

Thats because NLA_PUT() can make a jump to nla_put_failure label.

Fix this by using nla_put()

Many thanks to Ben Greear for his help

---
 net/ipv6/route.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/ipv6/route.c +6 -2
@@ -2411,8 +2411,12 @@ static int rt6_fill_node(struct net *net
 
 	rcu_read_lock();
 	n = dst_get_neighbour(&rt->dst);
-	if (n)
-		NLA_PUT(skb, RTA_GATEWAY, 16, &n->primary_key);
+	if (n) {
+		if (nla_put(skb, RTA_GATEWAY, 16, &n->primary_key) < 0) {
+			rcu_read_unlock();
+			goto nla_put_failure;
+		}
+	}
 	rcu_read_unlock();
 
 	if (rt->dst.dev)
author maintainer
#106 lore raw

PATCH 99/108 net: fix napi_reuse_skb() skb reserve

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 2a2a459eeeff48640dc557548ce576d666ab06ed ]

napi->skb is allocated in napi_get_frags() using netdev_alloc_skb_ip_align(), with a reserve of NET_SKB_PAD + NET_IP_ALIGN bytes.

However, when such skb is recycled in napi_reuse_skb(), it ends with a reserve of NET_IP_ALIGN which is suboptimal.

---
 net/core/dev.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/core/dev.c +2 -1
@@ -3504,7 +3504,8 @@ EXPORT_SYMBOL(napi_gro_receive);
 static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
 {
 	__skb_pull(skb, skb_headlen(skb));
-	skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb));
+	/* restore the reserve we had after netdev_alloc_skb_ip_align() */
+	skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN - skb_headroom(skb));
 	skb->vlan_tci = 0;
 	skb->dev = napi->dev;
 	skb->skb_iif = 0;
author maintainer
#107 lore raw

PATCH 100/108 Remove printk from rds_sendmsg

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Jones <[email protected]>

[ Upstream commit a6506e1486181975d318344143aca722b2b91621 ]

no socket layer outputs a message for this error and neither should rds.

---
 net/rds/send.c |    1 -
 1 file changed, 1 deletion(-)
net/rds/send.c +0 -1
@@ -932,7 +932,6 @@ int rds_sendmsg(struct kiocb *iocb, stru
 	/* Mirror Linux UDP mirror of BSD error message compatibility */
 	/* XXX: Perhaps MSG_MORE someday */
 	if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_CMSG_COMPAT)) {
-		printk(KERN_INFO "msg_flags 0x%08X\n", msg->msg_flags);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
author maintainer
#108 lore raw

PATCH 101/108 sky2: override for PCI legacy power management

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: stephen hemminger <[email protected]>

[ Upstream commit 5676cc7bfe1e388e87843f71daa229610385b41e ]

Some BIOS's don't setup power management correctly (what else is new) and don't allow use of PCI Express power control. Add a special exception module parameter to allow working around this issue. Based on slightly different patch by Knut Petersen.

---
 drivers/net/sky2.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/net/sky2.c +11 -0
@@ -94,6 +94,10 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
+static int legacy_pme = 0;
+module_param(legacy_pme, int, 0);
+MODULE_PARM_DESC(legacy_pme, "Legacy power management");
+
 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
@@ -794,6 +798,13 @@ static void sky2_wol_init(struct sky2_po
 	/* Disable PiG firmware */
 	sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
 
+	/* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
+	if (legacy_pme) {
+		u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+		reg1 |= PCI_Y2_PME_LEGACY;
+		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	}
+
 	/* block receiver */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 }
author maintainer
#109 lore raw

PATCH 102/108 xfrm: Access the replay notify functions via the registered callbacks

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steffen Klassert <[email protected]>

[ Upstream commit 1265fd616782ef03b98fd19f65c2b47fcd4ea11f ]

We call the wrong replay notify function when we use ESN replay handling. This leads to the fact that we don't send notifications if we use ESN. Fix this by calling the registered callbacks instead of xfrm_replay_notify().

---
 net/xfrm/xfrm_replay.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
net/xfrm/xfrm_replay.c +3 -3
@@ -166,7 +166,7 @@ static void xfrm_replay_advance(struct x
 	}
 
 	if (xfrm_aevent_is_on(xs_net(x)))
-		xfrm_replay_notify(x, XFRM_REPLAY_UPDATE);
+		x->repl->notify(x, XFRM_REPLAY_UPDATE);
 }
 
 static int xfrm_replay_overflow_bmp(struct xfrm_state *x, struct sk_buff *skb)
@@ -293,7 +293,7 @@ static void xfrm_replay_advance_bmp(stru
 	}
 
 	if (xfrm_aevent_is_on(xs_net(x)))
-		xfrm_replay_notify(x, XFRM_REPLAY_UPDATE);
+		x->repl->notify(x, XFRM_REPLAY_UPDATE);
 }
 
 static void xfrm_replay_notify_bmp(struct xfrm_state *x, int event)
@@ -502,7 +502,7 @@ static void xfrm_replay_advance_esn(stru
 	}
 
 	if (xfrm_aevent_is_on(xs_net(x)))
-		xfrm_replay_notify(x, XFRM_REPLAY_UPDATE);
+		x->repl->notify(x, XFRM_REPLAY_UPDATE);
 }
 
 static struct xfrm_replay xfrm_replay_legacy = {
author maintainer
#110 lore raw

PATCH 103/108 lockd: fix arg parsing for grace_period and timeout.

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: NeilBrown <[email protected]>

commit de5b8e8e047534aac6bc9803f96e7257436aef9c upstream.

If you try to set grace_period or timeout via a module parameter to lockd, and do this on a big-endian machine where

sizeof(int) != sizeof(unsigned long)

it won't work. This number given will be effectively shifted right by the difference in those two sizes.

So cast kp->arg properly to get correct result.

---
 fs/lockd/svc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/lockd/svc.c +1 -1
@@ -440,7 +440,7 @@ static int param_set_##name(const char *
 	__typeof__(type) num = which_strtol(val, &endp, 0);		\
 	if (endp == val || *endp || num < (min) || num > (max))		\
 		return -EINVAL;						\
-	*((int *) kp->arg) = num;					\
+	*((type *) kp->arg) = num;					\
 	return 0;							\
 }
 
author maintainer
#111 lore raw

PATCH 104/108 x86, tsc: Skip refined tsc calibration on systems with reliable TSC

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alok Kataria <[email protected]>

commit 57779dc2b3b75bee05ef5d1ada47f615f7a13932 upstream.

While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it.

So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm.

We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods.

Cc John Stultz <[email protected]>
Cc Dirk Brandewie <[email protected]>
Cc Alan Cox <[email protected]>

[jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later]

---
 arch/x86/kernel/tsc.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
arch/x86/kernel/tsc.c +10 -0
@@ -956,6 +956,16 @@ static int __init init_tsc_clocksource(v
 		clocksource_tsc.rating = 0;
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
 	}
+
+	/*
+	 * Trust the results of the earlier calibration on systems
+	 * exporting a reliable TSC.
+	 */
+	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
+		clocksource_register_khz(&clocksource_tsc, tsc_khz);
+		return 0;
+	}
+
 	schedule_delayed_work(&tsc_irqwork, 0);
 	return 0;
 }
author maintainer
#112 lore raw

PATCH 105/108 x86, tls: Off by one limit check

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 8f0750f19789cf352d7e24a6cc50f2ab1b4f1372 upstream.

These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array.

---
 arch/x86/kernel/tls.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/tls.c +2 -2
@@ -163,7 +163,7 @@ int regset_tls_get(struct task_struct *t
 {
 	const struct desc_struct *tls;
 
-	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
+	if (pos >= GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
 	    (pos % sizeof(struct user_desc)) != 0 ||
 	    (count % sizeof(struct user_desc)) != 0)
 		return -EINVAL;
@@ -198,7 +198,7 @@ int regset_tls_set(struct task_struct *t
 	struct user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
 	const struct user_desc *info;
 
-	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
+	if (pos >= GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
 	    (pos % sizeof(struct user_desc)) != 0 ||
 	    (count % sizeof(struct user_desc)) != 0)
 		return -EINVAL;
author maintainer
#113 lore raw

PATCH 106/108 compat: use sys_sendfile64() implementation for sendfile syscall

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Metcalf <[email protected]>

commit 1631fcea8399da5e80a80084b3b8c5bfd99d21e7 upstream.

<asm-generic/unistd.h> was set up to use sys_sendfile() for the 32-bit compat API instead of sys_sendfile64(), but in fact the right thing to do is to use sys_sendfile64() in all cases. The 32-bit sendfile64() API in glibc uses the sendfile64 syscall, so it has to be capable of doing full 64-bit operations. But the sys_sendfile() kernel implementation has a MAX_NON_LFS test in it which explicitly limits the offset to 2^32. So, we need to use the sys_sendfile64() implementation in the kernel for this case.

---
 include/asm-generic/unistd.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/asm-generic/unistd.h +1 -1
@@ -218,7 +218,7 @@ __SC_COMP(__NR_pwritev, sys_pwritev, com
 
 /* fs/sendfile.c */
 #define __NR3264_sendfile 71
-__SC_3264(__NR3264_sendfile, sys_sendfile64, sys_sendfile)
+__SYSCALL(__NR3264_sendfile, sys_sendfile64)
 
 /* fs/select.c */
 #define __NR_pselect6 72
author maintainer
#114 lore raw

PATCH 107/108 nfsd: dont allow zero length strings in cache_parse()

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 6d8d17499810479eabd10731179c04b2ca22152f upstream.

There is no point in passing a zero length string here and quite a few of that cache_parse() implementations will Oops if count is zero.

---
 net/sunrpc/cache.c |    2 ++
 1 file changed, 2 insertions(+)
net/sunrpc/cache.c +2 -0
@@ -828,6 +828,8 @@ static ssize_t cache_do_downcall(char *k
 {
 	ssize_t ret;
 
+	if (count == 0)
+		return -EINVAL;
 	if (copy_from_user(kaddr, buf, count))
 		return -EFAULT;
 	kaddr[count] = '\0';
author maintainer
#115 lore raw

PATCH 108/108 serial: sh-sci: fix a race of DMA submit_tx on transfer

In reply to Greg KH

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yoshii Takashi <[email protected]>

commit 49d4bcaddca977fffdea8b0b71f6e5da96dac78e upstream.

When DMA is enabled, sh-sci transfer begins with
uart_start()
sci_start_tx()
if (cookie_tx < 0) schedule_work()
Then, starts DMA when wq scheduled, -- (A)
process_one_work()
work_fn_rx()
cookie_tx = desc->submit_tx()
And finishes when DMA transfer ends, -- (B)
sci_dma_tx_complete()
async_tx_ack()
cookie_tx = -EINVAL
(possible another schedule_work())

This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash.

To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work().
But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx().

This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start().
Another gap between async_tx_ack() and another schedule_work() results in the same issue, too.

This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps.

---
 drivers/tty/serial/sh-sci.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/tty/serial/sh-sci.c +10 -5
@@ -953,17 +953,20 @@ static void sci_dma_tx_complete(void *ar
 	port->icount.tx += sg_dma_len(&s->sg_tx);
 
 	async_tx_ack(s->desc_tx);
-	s->cookie_tx = -EINVAL;
 	s->desc_tx = NULL;
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
 	if (!uart_circ_empty(xmit)) {
+		s->cookie_tx = 0;
 		schedule_work(&s->work_tx);
-	} else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
-		u16 ctrl = sci_in(port, SCSCR);
-		sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+	} else {
+		s->cookie_tx = -EINVAL;
+		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+			u16 ctrl = sci_in(port, SCSCR);
+			sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+		}
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -1225,8 +1228,10 @@ static void sci_start_tx(struct uart_por
 	}
 
 	if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
-	    s->cookie_tx < 0)
+	    s->cookie_tx < 0) {
+		s->cookie_tx = 0;
 		schedule_work(&s->work_tx);
+	}
 #endif
 
 	if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {