eb_cpux9k2: add USB host support to board
PATCH 1/1 eb_cpux9k2: add USB host support to board
* add USB host support to eb_cpux9k2 board
--- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
include/configs/eb_cpux9k2.h +14 -0
@@ -139,6 +139,8 @@#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@/* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"/* * UART/CONSOLE
Signature · 1 line
1.7.7
PATCH 1/1 eb_cpux9k2: add USB host support to board
Dear Jens Scharsig,
Quoted 1 line
* add USB host support to
eb_cpux9k2board
Did you test this too?
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Quoted 27 lines
Signed-off-by Jens Scharsig <[email protected]>--- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)include/configs/eb_cpux9k2.h +7
-0@@ -139,6 +139,8 @@#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define CONFIG_SYS_LONGHELP @@ -169,6 +171,18 @@/* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION
include/configs/eb_cpux9k2.h line 188
Quoted 10 lines
include/configs/eb_cpux9k2.h +7
-0+#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"/* * UART/CONSOLE
Best regards,
Marek Vasut
PATCH 1/1 eb_cpux9k2: add USB host support to board
Am 2012-04-01 18:14, schrieb Marek Vasut:
Quoted 5 lines
Dear Jens Scharsig,
Quoted 1 line
* add USB host support to
eb_cpux9k2boardDid you test this too?
Of course, I've test this with/against current RC1.
Quoted 39 lines
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Quoted 35 lines
Signed-off-by Jens Scharsig <[email protected]>--- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)include/configs/eb_cpux9k2.h +14
-0@@ -139,6 +139,8 @@#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define CONFIG_SYS_LONGHELP @@ -169,6 +171,18 @@/* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
Quoted 5 lines
include/configs/eb_cpux9k2.h line 188
Quoted 2 lines
include/configs/eb_cpux9k2.h +0
-0/* * UART/CONSOLE Best regards,
Marek Vasut
Best regards
Jens Scharsig
PATCH 1/1 eb_cpux9k2: add USB host support to board
Dear esw at bus-elektronik.de,
Quoted 8 lines
Am 2012-04-01 18:14, schrieb Marek Vasut:
Quoted 5 lines
Dear Jens Scharsig,
Quoted 1 line
* add USB host support to
eb_cpux9k2boardDid you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
Quoted 54 lines
Quoted 44 lines
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Quoted 41 lines
Signed-off-by Jens Scharsig <[email protected]>---
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)include/configs/eb_cpux9k2.h +2
-0@@ -139,6 +139,8 @@#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define
CONFIG_SYS_LONGHELPinclude/configs/eb_cpux9k2.h +12
-0@@ -169,6 +171,18 @@/* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"Quoted 6 lines
Quoted 3 lines
/*
* UART/CONSOLE
Best regards,
Marek VasutTested-by Jens Scharsig <[email protected]>
Quoted 7 lines
Best regards
Jens Scharsig
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Best regards,
Marek Vasut
PATCH 1/1 eb_cpux9k2: add USB host support to board
Dear Marek Vasut,
Quoted 5 lines
Dear esw at bus-elektronik.de,
Quoted 3 lines
Am 2012-04-01 18:14, schrieb Marek Vasut:
Quoted 2 lines
Dear Jens Scharsig,
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
* add USB host support to
eb_cpux9k2boardDid you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians. Albert what is your opinion ?
Quoted 57 lines
Quoted 57 lines
Quoted 45 lines
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Quoted 41 lines
Signed-off-by Jens Scharsig<[email protected]>---
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)include/configs/eb_cpux9k2.h +2
-0@@ -139,6 +139,8 @@#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT #define CONFIG_SYS_LONGHELPinclude/configs/eb_cpux9k2.h +12
-0@@ -169,6 +171,18 @@/* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"Quoted 6 lines
Quoted 3 lines
/*
* UART/CONSOLE
Best regards,
Marek VasutTested-by Jens Scharsig<[email protected]>Best regards
Quoted 8 lines
Quoted 5 lines
Jens Scharsig
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-bootBest regards,
Marek Vasut
Best regards
Jens Scharsig
PATCH 1/1 eb_cpux9k2: add USB host support to board
Dear Jens Scharsig,
Quoted 9 lines
Dear Marek Vasut,
Quoted 7 lines
Dear esw at bus-elektronik.de,
Quoted 5 lines
Am 2012-04-01 18:14, schrieb Marek Vasut:
Quoted 4 lines
Dear Jens Scharsig,
Quoted 1 line
* add USB host support to
eb_cpux9k2board
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians.
Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy if we put this into next release? Since I just submitted my pullrq for -RC1 and I won't be too happy to push this into -RC2, it's way too far past merge window.
Quoted 5 lines
Albert what is your opinion ?
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Best regards,
Marek Vasut
PATCH 1/1 eb_cpux9k2: add USB host support to board
Dear Marek Vasut,
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Dear esw at bus-elektronik.de,
Quoted 8 lines
Am 2012-04-01 18:14, schrieb Marek Vasut:
Quoted 5 lines
Dear Jens Scharsig,
Quoted 1 line
* add USB host support to
eb_cpux9k2boardDid you test this too?
Of course, I've test this with/against current RC1.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians.
Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy if we put this into next release? Since I just submitted my pullrq for -RC1 and
LOL
I have no problems to wait for next Release. I think you mean 2012.06.
The patch have has first anniversary in soon. I would happy, if it gives not a second anniversary ;-)
Best regards
Jens Scharsig
Wolfgang Denk
AppliedPATCH 1/1 eb_cpux9k2: add USB host support to board
In reply to Jens ScharsigDear Jens Scharsig,
Quoted 6 lines · In message <[email protected]> you wrote:
* add USB host support to
eb_cpux9k2boardSigned-off-by Jens Scharsig <[email protected]>--- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de All he had was nothing, but that was something, and now it had been taken away. - Terry Pratchett, _Sourcery_