Skip to contentSkip to conversation

mmc: remove MMC bus legacy suspend/resume method

PATCH Superseded Chuanxiao Dong 2 participants 3 messages Apr 10, 2012 – Apr 11, 2012 MMC, SD and SDIO

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mmc: remove MMC bus legacy suspend/resume method

MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode

---
Changes in v2:
use SET_SYSTEM_SLEEP_PM_OPS to define sleep callbacks as Rafael suggested

Changes in v3:
remove NULL pointer define for runtime callbacks when PM_RUNTIME is not selected, as Ulf Hansson suggested

 drivers/mmc/card/block.c |    2 +-
 drivers/mmc/core/bus.c   |   24 ++++++------------------
 include/linux/mmc/card.h |    2 +-
 3 files changed, 8 insertions(+), 20 deletions(-)
drivers/mmc/card/block.c +1 -1
index f2020d3..3582c03 100644
@@ -1826,7 +1826,7 @@ static void mmc_blk_remove(struct mmc_card *card)
 }
 
 #ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
+static int mmc_blk_suspend(struct mmc_card *card)
 {
 	struct mmc_blk_data *part_md;
 	struct mmc_blk_data *md = mmc_get_drvdata(card);
drivers/mmc/core/bus.c +6 -18
index 5d011a3..1996c9b 100644
@@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
 {
 	struct mmc_driver *drv = to_mmc_driver(dev->driver);
 	struct mmc_card *card = mmc_dev_to_card(dev);
 	int ret = 0;
 
 	if (dev->driver && drv->suspend)
-		ret = drv->suspend(card, state);
+		ret = drv->suspend(card);
 	return ret;
 }
 
@@ -144,8 +144,6 @@ static int mmc_bus_resume(struct device *dev)
 	return ret;
 }
 
-#ifdef CONFIG_PM_RUNTIME
-
 static int mmc_runtime_suspend(struct device *dev)
 {
 	struct mmc_card *card = mmc_dev_to_card(dev);
@@ -166,19 +164,11 @@ static int mmc_runtime_idle(struct device *dev)
 }
 
 static const struct dev_pm_ops mmc_bus_pm_ops = {
-	.runtime_suspend	= mmc_runtime_suspend,
-	.runtime_resume		= mmc_runtime_resume,
-	.runtime_idle		= mmc_runtime_idle,
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+			mmc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
 };
 
-#define MMC_PM_OPS_PTR	(&mmc_bus_pm_ops)
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define MMC_PM_OPS_PTR	NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
 static struct bus_type mmc_bus_type = {
 	.name		= "mmc",
 	.dev_attrs	= mmc_dev_attrs,
@@ -186,9 +176,7 @@ static struct bus_type mmc_bus_type = {
 	.uevent		= mmc_bus_uevent,
 	.probe		= mmc_bus_probe,
 	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-	.pm		= MMC_PM_OPS_PTR,
+	.pm		= &mmc_bus_pm_ops,
 };
 
 int mmc_register_bus(void)
include/linux/mmc/card.h +1 -1
index 1a1ca71..c984c9a 100644
@@ -480,7 +480,7 @@ struct mmc_driver {
 	struct device_driver drv;
 	int (*probe)(struct mmc_card *);
 	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*suspend)(struct mmc_card *);
 	int (*resume)(struct mmc_card *);
 };
 
Signature · 1 line
1.7.1
#1 lore raw
Quoted 55 lines · Chuanxiao Dong

MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode

---
Changes in v2:
use SET_SYSTEM_SLEEP_PM_OPS to define sleep callbacks as Rafael suggested

Changes in v3:
remove NULL pointer define for runtime callbacks when PM_RUNTIME is not selected, as Ulf Hansson suggested

  drivers/mmc/card/block.c |    2 +-
  drivers/mmc/core/bus.c   |   24 ++++++------------------
  include/linux/mmc/card.h |    2 +-
  3 files changed, 8 insertions(+), 20 deletions(-)
drivers/mmc/card/block.c +1 -1
index f2020d3..3582c03 100644
@@ -1826,7 +1826,7 @@ static void mmc_blk_remove(struct mmc_card *card)
  }
 
  #ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
+static int mmc_blk_suspend(struct mmc_card *card)
  {
  	struct mmc_blk_data *part_md;
  	struct mmc_blk_data *md = mmc_get_drvdata(card);
drivers/mmc/core/bus.c +2 -2
index 5d011a3..1996c9b 100644
@@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev)
  	return 0;
  }
 
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
  {
  	struct mmc_driver *drv = to_mmc_driver(dev->driver);
  	struct mmc_card *card = mmc_dev_to_card(dev);
  	int ret = 0;
 
  	if (dev->driver&&  drv->suspend)
-		ret = drv->suspend(card, state);
+		ret = drv->suspend(card);
  	return ret;
  }
 

drivers/mmc/core/bus.c static int mmc_bus_resume(struct device *dev) · line 147

Quoted 4 lines
drivers/mmc/core/bus.c +0 -1
@@ -144,8 +144,6 @@ static int mmc_bus_resume(struct device *dev)
  	return ret;
  }
 
-#ifdef CONFIG_PM_RUNTIME

I don't think this "idfef" shall removed. Won't that trigger compiler warnings when !CONFIG_PM_RUNTIME?

Just remove these three lines from patch v2...

+#define mmc_runtime_suspend NULL
+#define mmc_runtime_resume NULL
+#define mmc_runtime_idle NULL

...and thus the "else" to the CONFIG_PM_RUNTIME, as done below.

Quoted 43 lines
drivers/mmc/core/bus.c +4 -15
-
  static int mmc_runtime_suspend(struct device *dev)
  {
  	struct mmc_card *card = mmc_dev_to_card(dev);
@@ -166,19 +164,11 @@ static int mmc_runtime_idle(struct device *dev)
  }
 
  static const struct dev_pm_ops mmc_bus_pm_ops = {
-	.runtime_suspend	= mmc_runtime_suspend,
-	.runtime_resume		= mmc_runtime_resume,
-	.runtime_idle		= mmc_runtime_idle,
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+			mmc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
  };
 
-#define MMC_PM_OPS_PTR	(&mmc_bus_pm_ops)
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define MMC_PM_OPS_PTR	NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
  static struct bus_type mmc_bus_type = {
  	.name		= "mmc",
  	.dev_attrs	= mmc_dev_attrs,
@@ -186,9 +176,7 @@ static struct bus_type mmc_bus_type = {
  	.uevent		= mmc_bus_uevent,
  	.probe		= mmc_bus_probe,
  	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-	.pm		= MMC_PM_OPS_PTR,
+	.pm		=&mmc_bus_pm_ops,
  };
 
  int mmc_register_bus(void)
include/linux/mmc/card.h +0 -0
index 1a1ca71..c984c9a 100644

include/linux/mmc/card.h struct mmc_driver { · line 486

Quoted 8 lines
include/linux/mmc/card.h +1 -1
@@ -480,7 +480,7 @@ struct mmc_driver {
  	struct device_driver drv;
  	int (*probe)(struct mmc_card *);
  	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*suspend)(struct mmc_card *);
  	int (*resume)(struct mmc_card *);
  };
 

Kind regards
Ulf Hansson

#2 lore raw
Quoted 65 lines

-----Original Message-----
From: Ulf Hansson [mailto:[email protected]]
Sent: Tuesday, April 10, 2012 10:33 PM
To: Dong, Chuanxiao
Cc: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH V3]mmc: remove MMC bus legacy suspend/resume method

Quoted 54 lines · Chuanxiao Dong

MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode

---
Changes in v2:
use SET_SYSTEM_SLEEP_PM_OPS to define sleep callbacks as Rafael suggested

Changes in v3:
remove NULL pointer define for runtime callbacks when PM_RUNTIME is not selected, as Ulf Hansson suggested

  drivers/mmc/card/block.c |    2 +-
  drivers/mmc/core/bus.c   |   24 ++++++------------------
  include/linux/mmc/card.h |    2 +-
  3 files changed, 8 insertions(+), 20 deletions(-)
drivers/mmc/card/block.c index renamed from drivers/mmc/card/block.c +0 -0

f2020d3..3582c03 100644

drivers/mmc/card/block.c +1 -1
@@ -1826,7 +1826,7 @@ static void mmc_blk_remove(struct mmc_card *card)
  }
 
  #ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
+static int mmc_blk_suspend(struct mmc_card *card)
  {
  	struct mmc_blk_data *part_md;
  	struct mmc_blk_data *md = mmc_get_drvdata(card); diff --git

a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 5d011a3..1996c9b 100644

drivers/mmc/core/bus.c +2 -2
@@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev)
  	return 0;
  }
 
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
  {
  	struct mmc_driver *drv = to_mmc_driver(dev->driver);
  	struct mmc_card *card = mmc_dev_to_card(dev);
  	int ret = 0;
 
  	if (dev->driver&&  drv->suspend)
-		ret = drv->suspend(card, state);
+		ret = drv->suspend(card);
  	return ret;
  }
 
Quoted 8 lines

drivers/mmc/core/bus.c static int mmc_bus_resume(struct device *dev) · line 147

Quoted 5 lines
drivers/mmc/core/bus.c +0 -1
@@ -144,8 +144,6 @@ static int mmc_bus_resume(struct device *dev)
  	return ret;
  }
 
-#ifdef CONFIG_PM_RUNTIME

I don't think this "idfef" shall removed. Won't that trigger compiler warnings when !CONFIG_PM_RUNTIME?

Yes, missed this. Will fix it. Thanks a lot!

Thanks
Chuanxiao

Quoted 64 lines

Just remove these three lines from patch v2...

(quoted diff) +3 -0
+#define mmc_runtime_suspend	NULL
+#define mmc_runtime_resume	NULL
+#define mmc_runtime_idle	NULL

...and thus the "else" to the CONFIG_PM_RUNTIME, as done below.

drivers/mmc/core/bus.c static int mmc_bus_resume(struct device *dev)

Quoted 4 lines
drivers/mmc/core/bus.c +0 -1
-
  static int mmc_runtime_suspend(struct device *dev)
  {
  	struct mmc_card *card = mmc_dev_to_card(dev); @@ -166,19 +164,11

@@

Quoted 39 lines

static int mmc_runtime_idle(struct device *dev)
}

  static const struct dev_pm_ops mmc_bus_pm_ops = {
drivers/mmc/core/bus.c +4 -14
-	.runtime_suspend	= mmc_runtime_suspend,
-	.runtime_resume		= mmc_runtime_resume,
-	.runtime_idle		= mmc_runtime_idle,
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+			mmc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
  };
 
-#define MMC_PM_OPS_PTR	(&mmc_bus_pm_ops)
-
-#else /* !CONFIG_PM_RUNTIME */
-
-#define MMC_PM_OPS_PTR	NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
  static struct bus_type mmc_bus_type = {
  	.name		= "mmc",
  	.dev_attrs	= mmc_dev_attrs,
@@ -186,9 +176,7 @@ static struct bus_type mmc_bus_type = {
  	.uevent		= mmc_bus_uevent,
  	.probe		= mmc_bus_probe,
  	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-	.pm		= MMC_PM_OPS_PTR,
+	.pm		=&mmc_bus_pm_ops,
  };
 
  int mmc_register_bus(void)
include/linux/mmc/card.h index renamed from include/linux/mmc/card.h +0 -0

1a1ca71..c984c9a 100644

include/linux/mmc/card.h struct mmc_driver { · line 486

Quoted 8 lines
include/linux/mmc/card.h +1 -1
@@ -480,7 +480,7 @@ struct mmc_driver {
  	struct device_driver drv;
  	int (*probe)(struct mmc_card *);
  	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*suspend)(struct mmc_card *);
  	int (*resume)(struct mmc_card *);
  };
 

Kind regards
Ulf Hansson