Skip to contentSkip to conversation

net/ipv6/udp: Add encap_rcv support to IPv6 UDP

PATCH In review Benjamin LaHaise 3 participants 3 messages Apr 11, 2012 – Apr 13, 2012

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 net/ipv6/udp: Add encap_rcv support to IPv6 UDP

At present, UDP encapsulated protocols (like L2TP) are only able to use the encap_rcv hook with UDP over IPv4. This patch adds the same support for use with UDP over IPv6.

---
 net/ipv6/udp.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
net/ipv6/udp.c +31 -0
index 37b0699..4d7cd72 100644
@@ -515,6 +515,37 @@ int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 	if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
 		goto drop;
 
+	if (up->encap_type) {
+		int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+
+		/*
+		 * This is an encapsulation socket so pass the skb to
+		 * the socket's udp_encap_rcv() hook. Otherwise, just
+		 * fall through and pass this up the UDP socket.
+		 * up->encap_rcv() returns the following value:
+		 * =0 if skb was successfully passed to the encap
+		 *    handler or was discarded by it.
+		 * >0 if skb should be passed on to UDP.
+		 * <0 if skb should be resubmitted as proto -N
+		 */
+
+		/* if we're overly short, let UDP handle it */
+		encap_rcv = ACCESS_ONCE(up->encap_rcv);
+		if (skb->len > sizeof(struct udphdr) && encap_rcv != NULL) {
+			int ret;
+
+			ret = encap_rcv(sk, skb);
+			if (ret <= 0) {
+				UDP6_INC_STATS_BH(sock_net(sk),
+						  UDP_MIB_INDATAGRAMS,
+						  is_udplite);
+				return -ret;
+			}
+		}
+
+		/* FALLTHROUGH -- it's a UDP Packet */
+	}
+
 	/*
 	 * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c).
 	 */
Signature · 5 lines
1.7.4.1


-- 
"Thought is the essence of where you are now."
#1 lore raw
Quoted 5 lines · Benjamin LaHaise

At present, UDP encapsulated protocols (like L2TP) are only able to use the encap_rcv hook with UDP over IPv4. This patch adds the same support for use with UDP over IPv6.

Quoted 46 lines
---
 net/ipv6/udp.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
net/ipv6/udp.c +31 -0
index 37b0699..4d7cd72 100644
@@ -515,6 +515,37 @@ int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb)
 	if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
 		goto drop;
 
+	if (up->encap_type) {
+		int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+
+		/*
+		 * This is an encapsulation socket so pass the skb to
+		 * the socket's udp_encap_rcv() hook. Otherwise, just
+		 * fall through and pass this up the UDP socket.
+		 * up->encap_rcv() returns the following value:
+		 * =0 if skb was successfully passed to the encap
+		 *    handler or was discarded by it.
+		 * >0 if skb should be passed on to UDP.
+		 * <0 if skb should be resubmitted as proto -N
+		 */
+
+		/* if we're overly short, let UDP handle it */
+		encap_rcv = ACCESS_ONCE(up->encap_rcv);
+		if (skb->len > sizeof(struct udphdr) && encap_rcv != NULL) {
+			int ret;
+
+			ret = encap_rcv(sk, skb);
+			if (ret <= 0) {
+				UDP6_INC_STATS_BH(sock_net(sk),
+						  UDP_MIB_INDATAGRAMS,
+						  is_udplite);
+				return -ret;
+			}
+		}
+
+		/* FALLTHROUGH -- it's a UDP Packet */
+	}
+
 	/*
 	 * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c).
 	 */
Signature · 4 lines
James Chapman
Katalix Systems Ltd
http://www.katalix.com
Catalysts for your Embedded Linux software development
maintainer
#2 lore raw
In reply to Benjamin LaHaise

From: Benjamin LaHaise <[email protected]>
Date: Tue, 10 Apr 2012 22:20:47 -0400

Quoted 5 lines

At present, UDP encapsulated protocols (like L2TP) are only able to use the encap_rcv hook with UDP over IPv4. This patch adds the same support for use with UDP over IPv6.

This isn't right at all.

The return value of udpv6_queue_rcv_skb() ignorred at all call sites except when it is invoked via ->backlog_rcv(), which expects a different kind of return value, not an encap operation indication.

So the whole "requeue as proto '-N'" logic isn't going to ever work.

You need to do what the ipv4 side does, split the routine into two parts:

1) A __udpv6_queue_rcv_skb() which purely handles socket queueing cases. It does not handle encap or anything like that.

This is what is what you hook into ->backlog_rcv for ipv6 udp.

2) A udpv6_queue_rcv_skb() which is invoked by the UDPv6 socket demux on receive, and which will properly propagate the return values back down into ipv6 input to do the "requeue as proto '-N'" stuff.

Please resubmit both of these patches once you've fixed this up (and tested it).