HDMI TV doesn't work over HDMI cable
Hi,
I've got some really strange issue. I've followed GPU within ASUS MB:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
I'm trying to attach HDMI TV to it. My motherboard has both HDMI and DVI outputs. So when I'm using DVI output together with cheap DVI->HDMI cable, everything works. But once I switch to HDMI->HDMI, display is detected, but display nothing. TV shows "No signal" message.
I've tried to compare xrandr output for both cases and it looks same:
randr 2012-04-14 20:57:29.000000000 +0300 renamed from randr 2012-04-14 20:54:03.000000000 +0300 +0 -1
@@ -1,6 +1,8 @@ Screen 0: minimum 320 x 200, current 1360 x 768, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) -HDMI1 connected 1360x768+0+0 (normal left inverted right x axis y axis)
160mm x 90mm
+HDMI1 disconnected (normal left inverted right x axis y axis) +DP1 disconnected (normal left inverted right x axis y axis) +HDMI2 connected 1360x768+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1360x768 60.0*+
1920x1080 50.0 60.0 30.0 25.0 24.0
1280x720 50.0 60.0
@@ -11,8 +13,6 @@
720x480 59.9
640x480 72.8 75.0 66.7 60.0
720x400 70.1 -DP1 disconnected (normal left inverted right x axis y axis) -HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis)
(Looks like HDMI1 means DVI on my MB and HDMI2 means HDMI).
Here is link to Xorg.log for both cases:
http://dion.org.ua/uploads/2012/04/xorg_dvi.log
http://dion.org.ua/uploads/2012/04/xorg_hdmi.log
Any ideas why I can't connect TV using HDMI? I'm pretty sure that TV is ok as well as HDMI cable. Also same TV works when connecting to laptop with GMA4500 over HDMI.
xserver-xorg 1:7.6+12
xserver-xorg-core 2:1.11.4-1
xserver-xorg-input-evdev 1:2.7.0-1 xserver-xorg-video-fbdev 1:0.4.2-4+b2 xserver-xorg-video-intel 2:2.18.0-2
xserver-xorg-video-vesa 1:2.3.1-1
Signature · 1 line
WBR, Dmitry
Quoted 4 lines · Dmitry Nezhevenko
Hi,
I've got some really strange issue. I've followed GPU within ASUS MB:
Quoted 8 lines
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
I'm trying to attach HDMI TV to it. My motherboard has both HDMI and DVI outputs. So when I'm using DVI output together with cheap
DVI->HDMIcable, everything works. But once I switch toHDMI->HDMI, display is detected, but display nothing. TV shows "No signal" message.
Hi,
could you open a bug on this and attach those Xorg log files together with the 'dmesg' output when booting with the 'drm.debug=0xe' kernel parameter? And also your kernel version? The
http://intellinuxgraphics.org/how_to_report_bug.html has a nice summary on how to collect all the data we need.
One thing that would certainly help is if you could attach the diff between running 'intel_reg_dumper' with DVI and HDMI connections (running it over ssh for example, if you don't have any valid output with HDMI). The 'no signal' message means that we are sending TV data that it does not understands, but there are many possible cases why it could happen.. Intel_reg_dumper should give us a summary of what bits and registers could be wrong.
Signature · 2 lines
Eugeni Dodonov <http://eugeni.dodonov.net/>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Eugeni Dodonov
could you open a bug on this and attach those Xorg log files together with the 'dmesg' output when booting with the 'drm.debug=0xe' kernel parameter? And also your kernel version? The
http://intellinuxgraphics.org/how_to_report_bug.html has a nice summary on how to collect all the data we need.
Hi,
I've added all of this: https://bugs.freedesktop.org/show_bug.cgi?id=48740
Quoted 8 lines
One thing that would certainly help is if you could attach the diff between running '
intel_reg_dumper' with DVI and HDMI connections (running it over ssh for example, if you don't have any valid output with HDMI). The 'no signal' message means that we are sending TV data that it does not understands, but there are many possible cases why it could happen..Intel_reg_dumpershould give us a summary of what bits and registers could be wrong.
Output looks same :(
reg_dumper_hdmi.txt 2012-04-15 22:31:31.212984536 +0300 renamed from reg_dumper_dvi.txt 2012-04-15 22:31:26.548920891 +0300 +2 -2
@@ -150,8 +150,8 @@ FDI_RXB_IIR: 0x00000000 FDI_RXB_IMR: 0x000000ff PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync) - HDMIB: 0x80000adc (enabled pipe A 8bpc TMDS HDMI audio enabled +vsync +hsync detected) - HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected) + HDMIB: 0x00000adc (disabled pipe A 8bpc TMDS HDMI audio enabled +vsync +hsync detected) + HDMIC: 0x8000025c (enabled pipe A 8bpc SDVO HDMI audio enabled +vsync +hsync detected) HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected) PCH_LVDS: 0x40000000 (disabled, pipe B, 18 bit, 1 channel) CPU_eDP_A: 0x00000018
I've added to bugreport that over HDMI cable TV doesn't work even in BIOS/GRUB screen. Maybe it's intended or maybe not...
Thanks
Signature · 1 line
WBR, Dmitry