Skip to contentSkip to conversation

ASoC: dapm - Add API call to query valid DAPM paths.

PATCH Applied Liam Girdwood 2 participants 2 messages Apr 18, 2012

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ASoC: dapm - Add API call to query valid DAPM paths.

In preparation for ASoC DSP support.

Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path.

This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations.

---
Changes since V1:-
Now uses new DAPM mutex.
Tracepoint used for path debug.

 include/sound/soc-dapm.h    |    5 ++
 include/trace/events/asoc.h |   80 ++++++++++++++++++++++++++++
 sound/soc/soc-dapm.c        |  122 +++++++++++++++++++++++++++++++++++++++----
 3 files changed, 197 insertions(+), 10 deletions(-)
include/sound/soc-dapm.h +5 -0
index bea0c86..e3833d9 100644
@@ -321,6 +321,7 @@ struct snd_soc_dapm_pin;
 struct snd_soc_dapm_route;
 struct snd_soc_dapm_context;
 struct regulator;
+struct snd_soc_dapm_widget_list;
 
 int dapm_reg_event(struct snd_soc_dapm_widget *w,
 		   struct snd_kcontrol *kcontrol, int event);
@@ -403,6 +404,10 @@ void snd_soc_dapm_auto_nc_codec_pins(struct snd_soc_codec *codec);
 /* Mostly internal - should not normally be used */
 void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
 
+/* dapm path query */
+int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream,
+	struct snd_soc_dapm_widget_list **list);
+
 /* dapm widget types */
 enum snd_soc_dapm_type {
 	snd_soc_dapm_input = 0,		/* input pin */
include/trace/events/asoc.h +80 -0

92 lines not on this page · raw message

sound/soc/soc-dapm.c +112 -10

186 lines not on this page · raw message

Signature · 1 line
1.7.5.4
Applied
#1 lore raw
Quoted 5 lines · Liam Girdwood

In preparation for ASoC DSP support.

Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path.

Applied, thanks.