ARM: Initial support for Cortex-M3
Subsystems (2)
v4 cover ARM: Initial support for Cortex-M3
Hello,
I rebased the series to 3.4-rc1. Apart from the asm/system.h disintegration this was trivial and git did it just right for me.
I dropped patch 3 (ARM: force branch instructions to use long distance encoding) as I don't need that anymore for reasons I didn't try to find out. With the rework of patch 1 (ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15 -> ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15) patch 2 isn't needed anymore, too.
The patches are available via git at
git://git.pengutronix.de/git/ukl/linux.git cortexm3
I also updated the efm32 branch in the same repository that additionally contains support for Energymicro's efm32 processor. The patches in this series were tested on such a machine.
As before interrupt support and Makefile/Kconfig glue are missing. The former needs some more love as I think it should be possible to support the Cortex M3's nvic using common/gic.c. I plan to address this when this series made it into Linus' tree.
See the mails with the respective patches for some more details about what changed compared to v3.
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |
PATCH v4 1/3 ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15
This makes cr_alignment a constant 0 to break code that tries to modify the value as it's likely that it's built on wrong assumption when CONFIG_CPU_CP15 isn't defined. For code that is only reading the value 0 is more or less a fine value to report.
---
Hello,
in the v3 series this patch was titled "ARM: protect usage of cr_alignment by #ifdef CONFIG_CPU_CP15". In response to Nicolas' review cr_alignment was made a #define and only the code modifying it was patched.
Moreover I patched the cachepolicy and noalign kernel parameter handling to just print a warning that these are unimplemented without cp15.
Best regards
Uwe
arch/arm/include/asm/cp15.h | 11 ++++++++++- arch/arm/kernel/head-common.S | 9 +++++++-- arch/arm/mm/alignment.c | 2 ++ arch/arm/mm/mmu.c | 17 +++++++++++++++++ 4 files changed, 36 insertions(+), 3 deletions(-)
arch/arm/include/asm/cp15.h +10 -1
@@ -42,6 +42,8 @@#define vectors_high () (0)#endif +#ifdef CONFIG_CPU_CP15 +extern unsigned long cr_no_alignment;/* defined in entry-armv.S */ extern unsigned long cr_alignment;/* defined in entry-armv.S */
@@ -82,6 +84,13 @@ static inline void set_copro_access(unsigned int val)isb (); } -#endif +#else /* ifdef CONFIG_CPU_CP15 */ + +#define cr_no_alignment UL(0) +#define cr_alignment UL(0) + +#endif /* ifdef CONFIG_CPU_CP15 / else */ + +#endif /* ifndef __ASSEMBLY__ */ #endif
arch/arm/kernel/head-common.S +7 -2
@@ -98,8 +98,9 @@ __mmap_switched: str r9, [r4] @ Save processor ID str r1, [r5] @ Save machine type str r2, [r6] @ Save atags pointer - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r7, {r0, r4} @ Save control register values + cmp r7, #0 + bicne r4, r0, #CR_A @ Clear 'A' bit + stmneia r7, {r0, r4} @ Save control register values b start_kernel ENDPROC(__mmap_switched)
@@ -113,7 +114,11 @@ __mmap_switched_data: .long processor_id @ r4 .long __machine_arch_type @ r5 .long __atags_pointer @ r6 +#ifdef CONFIG_CPU_CP15 .long cr_alignment @ r7 +#else + .long 0 +#endif .long init_thread_union + THREAD_START_SP @ sp .size __mmap_switched_data, . - __mmap_switched_data
arch/arm/mm/alignment.c +2 -0
@@ -962,12 +962,14 @@ static int __init alignment_init(void)return -ENOMEM ;#endif +#ifdef CONFIG_CPU_CP15 if (cpu_is_v6_unaligned ()) { cr_alignment &= ~CR_A ; cr_no_alignment &= ~CR_A ;set_cr (cr_alignment); ai_usermode =safe_usermode (ai_usermode, false); } +#endif hook_fault_code (FAULT_CODE_ALIGNMENT , do_alignment,SIGBUS ,BUS_ADRALN ,"alignment exception" );
arch/arm/mm/mmu.c +17 -0
@@ -96,6 +96,7 @@ static struct cachepolicy cache_policies[] __initdata = { } }; +#ifdef CONFIG_CPU_CP15 /* * These are useful for identifying cache coherency * problems by allowing the cache or the cache and
@@ -194,6 +195,22 @@ void adjust_cr(unsigned long mask, unsigned long set) }#endif +#else + +static int __init early_cachepolicy (char *p) +{ +pr_warning ("cachepolicy kernel parameter not supported without cp15\n" ); +} +early_param ("cachepolicy" , early_cachepolicy); + +static int __init noalign_setup (char *__unused) +{ +pr_warning ("noalign kernel parameter not supported without cp15\n" ); +} +__setup ("noalign" , noalign_setup); + +#endif +#define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
Signature · 1 line
1.7.9.5
PATCH v4 2/3 Cortex-M3: Add base support for Cortex-M3
In reply to Uwe Kleine-KönigFrom: Catalin Marinas <[email protected]>
This patch adds the base support for the Cortex-M3 processor (ARMv7-M architecture). It consists of the corresponding arch/arm/mm/ files and various #ifdef's around the kernel. Exception handling is implemented by a subsequent patch.
[ukleinek: squash in some changes originating from commit
b5717ba (Cortex-M3: Add support for the Microcontroller Prototyping System)
from the v2.6.33-arm1 patch stack, port to post 3.2, drop zImage support, drop reorganisation of pt_regs, and a few cosmetic changes]
---
Hello,
this patch was only rebased onto v3.4-rc1 and so needed some minor adaptions, e.g. for the asm/system.h disintegration.
Best regards
Uwe
arch/arm/include/asm/assembler.h | 13 ++- arch/arm/include/asm/cputype.h | 3 + arch/arm/include/asm/glue-cache.h | 24 ++++++ arch/arm/include/asm/glue-df.h | 8 ++ arch/arm/include/asm/glue-proc.h | 9 ++ arch/arm/include/asm/irqflags.h | 51 +++++++++++- arch/arm/include/asm/processor.h | 7 ++ arch/arm/include/asm/ptrace.h | 20 ++++- arch/arm/include/asm/system_info.h | 1 + arch/arm/kernel/asm-offsets.c | 3 + arch/arm/kernel/head-nommu.S | 9 +- arch/arm/kernel/setup.c | 13 ++- arch/arm/kernel/traps.c | 2 + arch/arm/mm/nommu.c | 2 + arch/arm/mm/proc-v7m.S | 161 ++++++++++++++++++++++++++++++++++++ 15 files changed, 318 insertions(+), 8 deletions(-) create mode 100644 arch/arm/mm/proc-v7m.S
arch/arm/include/asm/assembler.h +12 -1
@@ -135,7 +135,11 @@* assumes FIQs are enabled, and that the processor is in SVC mode. */ .macro save_and_disable_irqs, oldcpsr +#ifdef CONFIG_CPU_V7M + mrs \oldcpsr, primask +#else mrs \oldcpsr, cpsr +#endif disable_irq .endm
@@ -149,7 +153,11 @@* guarantee that this will preserve the flags. */ .macro restore_irqs_notrace, oldcpsr +#ifdef CONFIG_CPU_V7M + msr primask, \oldcpsr +#else msr cpsr_c, \oldcpsr +#endif .endm .macro restore_irqs, oldcpsr
@@ -228,7 +236,10 @@#endif .endm -#ifdef CONFIG_THUMB2_KERNEL +#if defined(CONFIG_CPU_V7M ) + .macro setmode, mode, reg + .endm +#elif defined(CONFIG_THUMB2_KERNEL ) .macro setmode, mode, reg mov \reg, #\mode msr cpsr_c, \reg
arch/arm/include/asm/cputype.h +3 -0
@@ -46,6 +46,9 @@ extern unsigned int processor_id; : "cc"); \ __val; \ }) +#elif defined(CONFIG_CPU_V7M ) +#define read_cpuid (reg) (*(unsigned int *)0xe000ed00) +#define read_cpuid_ext (reg) 0#else #define read_cpuid (reg) (processor_id)#define read_cpuid_ext (reg) 0
arch/arm/include/asm/glue-cache.h +24 -0
@@ -125,10 +125,34 @@//# endif #endif +#if defined(CONFIG_CPU_V7M ) +# ifdef _CACHE +# error "Multi-cache not supported on ARMv7-M" +# else +# define _CACHE nop +# endif +#endif +#if !defined(_CACHE) && !defined(MULTI_CACHE )#error Unknown cache maintenance model#endif +#ifndef __ASSEMBLER__ +static inline void nop_flush_icache_all (void ) { } +static inline void nop_flush_kern_cache_all (void ) { } +static inline void nop_flush_user_cache_all (void ) { } +static inline void nop_flush_user_cache_range (unsigned long a,unsigned long b,unsigned int c) { } + +static inline void nop_coherent_kern_range (unsigned long a,unsigned long b) { } +static inline void nop_coherent_user_range (unsigned long a,unsigned long b) { } +static inline void nop_flush_kern_dcache_area (void *a,size_t s) { } + +static inline void nop_dma_flush_range (const void *a,const void *b) { } + +static inline void nop_dma_map_area (const void *s,size_t l,int f) { } +static inline void nop_dma_unmap_area (const void *s,size_t l,int f) { } +#endif +#ifndef MULTI_CACHE #define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
arch/arm/include/asm/glue-df.h +8 -0
@@ -103,6 +103,14 @@# endif #endif +#ifdef CONFIG_CPU_ABRT_NOMMU +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 +# else +# define CPU_DABORT_HANDLER nommu_early_abort +# endif +#endif +#ifndef CPU_DABORT_HANDLER #error Unknown data abort handler type#endif
arch/arm/include/asm/glue-proc.h +9 -0
@@ -248,6 +248,15 @@# endif #endif +#ifdef CONFIG_CPU_V7M +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_v7m +# endif +#endif +#ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init)#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
arch/arm/include/asm/irqflags.h +49 -2
72 lines not on this page · raw message
arch/arm/include/asm/processor.h +7 -0
@@ -49,7 +49,14 @@ struct thread_struct {#ifdef CONFIG_MMU #define nommu_start_thread (regs) do { } while (0)#else +#ifndef CONFIG_CPU_V7M #define nommu_start_thread (regs) regs->ARM_r10 = current->mm->start_data +#else +#define nommu_start_thread (regs) do { \ + regs->ARM_r10 = current->mm->start_data; \ + regs->ARM_EXC_RET = 0xfffffffdL; \ +} while (0) +#endif #endif #define start_thread (regs,pc,sp) \
arch/arm/include/asm/ptrace.h +19 -1
@@ -39,16 +39,25 @@#define FIQ26_MODE 0x00000001#define IRQ26_MODE 0x00000002#define SVC26_MODE 0x00000003 +#ifndef CONFIG_CPU_V7M #define USR_MODE 0x00000010 +#define SVC_MODE 0x00000013 +#else +#define USR_MODE 0x00000000 +#define SVC_MODE 0x00000000 +#endif #define FIQ_MODE 0x00000011#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013#define ABT_MODE 0x00000017#define UND_MODE 0x0000001b#define SYSTEM_MODE 0x0000001f#define MODE32_BIT 0x00000010#define MODE_MASK 0x0000001f +#ifndef CONFIG_CPU_V7M #define PSR_T_BIT 0x00000020 +#else +#define PSR_T_BIT 0x01000000 +#endif #define PSR_F_BIT 0x00000040#define PSR_I_BIT 0x00000080#define PSR_A_BIT 0x00000100
@@ -106,7 +115,11 @@ struct pt_regs { };#else /* __KERNEL__ */ struct pt_regs { +#ifdef CONFIG_CPU_V7M +unsigned long uregs[20 ]; +#else unsigned long uregs[18 ]; +#endif };#endif /* __KERNEL__ */
@@ -128,6 +141,7 @@ struct pt_regs {#define ARM_r1 uregs[1]#define ARM_r0 uregs[0]#define ARM_ORIG_r0 uregs[17] +#define ARM_EXC_RET uregs[18]/* * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
@@ -165,6 +179,7 @@ struct pt_regs {*/ static inline int valid_user_regs (struct pt_regs *regs) { +#ifndef CONFIG_CPU_V7M unsigned long mode = regs->ARM_cpsr &MODE_MASK ;/*
@@ -187,6 +202,9 @@ static inline int valid_user_regs(struct pt_regs *regs) regs->ARM_cpsr |=USR_MODE ;return 0 ; +#else /* ifndef CONFIG_CPU_V7M */ +return 1 ; +#endif }static inline long regs_return_value (struct pt_regs *regs)
arch/arm/include/asm/system_info.h +1 -0
@@ -11,6 +11,7 @@#define CPU_ARCH_ARMv5TEJ 7#define CPU_ARCH_ARMv6 8#define CPU_ARCH_ARMv7 9 +#define CPU_ARCH_ARMv7M 10#ifndef __ASSEMBLY__
arch/arm/kernel/asm-offsets.c +3 -0
@@ -91,6 +91,9 @@ int main(void)DEFINE (S_PC , offsetof(struct pt_regs , ARM_pc));DEFINE (S_PSR , offsetof(struct pt_regs , ARM_cpsr));DEFINE (S_OLD_R0 , offsetof(struct pt_regs , ARM_ORIG_r0)); +#ifdef CONFIG_CPU_V7M +DEFINE (S_EXC_RET , offsetof(struct pt_regs , ARM_EXC_RET)); +#endif DEFINE (S_FRAME_SIZE ,sizeof (struct pt_regs ));BLANK ();#ifdef CONFIG_CACHE_L2X0
arch/arm/kernel/head-nommu.S +6 -3
@@ -44,10 +44,13 @@ ENTRY(stext) setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled -#ifndef CONFIG_CPU_CP15 - ldr r9, =CONFIG_PROCESSOR_ID -#else +#if defined(CONFIG_CPU_CP15) mrc p15, 0, r9, c0, c0 @ get processor id +#elif defined(CONFIG_CPU_V7M) + ldr r9, =0xe000ed00 @ CPUID register address + ldr r9, [r9] +#else + ldr r9, =CONFIG_PROCESSOR_ID #endif bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)?
arch/arm/kernel/setup.c +12 -1
@@ -134,7 +134,9 @@ struct stack {u32 und[3 ]; }____cacheline_aligned ; +#ifndef CONFIG_CPU_V7M static struct stack stacks[NR_CPUS ]; +#endif char elf_platform[ELF_PLATFORM_SIZE ];EXPORT_SYMBOL (elf_platform);
@@ -214,7 +216,7 @@ static const char *proc_arch[] = {"5TEJ" ,"6TEJ" ,"7" , -"?(11)" , +"7M" ,"?(12)" ,"?(13)" , "?(14)",
@@ -223,6 +225,12 @@ static const char *proc_arch[] = { "?(17)", }; +#ifdef CONFIG_CPU_V7M +static int __get_cpu_architecture (void ) +{ +return CPU_ARCH_ARMv7M; +} +#else static int __get_cpu_architecture (void ) {int cpu_arch;
@@ -255,6 +263,7 @@ static int __get_cpu_architecture(void) return cpu_arch; } +#endif int __pure cpu_architecture (void ) {
@@ -382,6 +391,7 @@ static void __init feat_v6_fixup(void)*/ void cpu_init (void ) { +#ifndef CONFIG_CPU_V7M unsigned int cpu =smp_processor_id ();struct stack *stk = &stacks[cpu];
@@ -426,6 +436,7 @@ void cpu_init(void) "I" (offsetof(struct stack, und[0])), PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE) : "r14"); +#endif }int __cpu_logical_map[NR_CPUS ];
arch/arm/kernel/traps.c +2 -0
@@ -791,6 +791,7 @@ static void __init kuser_get_tls_init(unsigned long vectors)void __init early_trap_init (void *vectors_base) { +#ifndef CONFIG_CPU_V7M unsigned long vectors = (unsigned long )vectors_base;extern char __stubs_start[], __stubs_end[];extern char __vectors_start[], __vectors_end[];
@@ -824,4 +825,5 @@ void __init early_trap_init(void *vectors_base)flush_icache_range (vectors, vectors +PAGE_SIZE );modify_domain (DOMAIN_USER ,DOMAIN_CLIENT ); +#endif }
arch/arm/mm/nommu.c +2 -0
@@ -19,12 +19,14 @@void __init arm_mm_memblock_reserve (void ) { +#ifndef CONFIG_CPU_V7M /* * Register the exception vector page. * some architectures which the DRAM is the exception vector to trap, * alloc_page breaks with error, although it is not NULL, but "0." */ memblock_reserve (CONFIG_VECTORS_BASE ,PAGE_SIZE ); +#endif }void __init sanity_check_meminfo (void )
arch/arm/mm/proc-v7m.S new file +161 -0
161 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v4 2/3 Cortex-M3: Add base support for Cortex-M3
Quoted 7 lines · Uwe Kleine-K?nig
arch/arm/include/asm/irqflags.h +0
-0@@ -10,6 +10,18 @@*/ #if __LINUX_ARM_ARCH__ >=6
arch/arm/include/asm/irqflags.h line 21
Quoted 10 lines
arch/arm/include/asm/irqflags.h +9
-0+#ifdef CONFIG_CPU_V7M +static inline unsigned long arch_local_irq_save (void ) +{ +unsigned long flags; + + asmvolatile ( +" mrs %0, primask @ arch_local_irq_save\n" +" cpsid i" + :"=r" (flags) : :"memory" ,"cc" );
Wouldn't it produce a smaller patch to define something for "primask" vs "cpsr", rather than having to re-implement the entire function ?
Quoted 5 lines
arch/arm/include/asm/ptrace.h +0
-0
arch/arm/include/asm/ptrace.h line 48
Quoted 10 lines
arch/arm/include/asm/ptrace.h +6
-0@@ -39,16 +39,25 @@#define FIQ26_MODE 0x00000001#define IRQ26_MODE 0x00000002#define SVC26_MODE 0x00000003 +#ifndef CONFIG_CPU_V7M #define USR_MODE 0x00000010 +#define SVC_MODE 0x00000013 +#else +#define USR_MODE 0x00000000 +#define SVC_MODE 0x00000000 +#endif
Note that these definitions are exported to userspace. Do we want to expose this kind of change there?
arch/arm/include/asm/ptrace.h line 60
Quoted 13 lines
arch/arm/include/asm/ptrace.h +4
-1#define FIQ_MODE 0x00000011#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013#define ABT_MODE 0x00000017#define UND_MODE 0x0000001b#define SYSTEM_MODE 0x0000001f#define MODE32_BIT 0x00000010#define MODE_MASK 0x0000001f +#ifndef CONFIG_CPU_V7M #define PSR_T_BIT 0x00000020 +#else +#define PSR_T_BIT 0x01000000 +#endif
Ditto. Note also that these bits changing will be visible via the pt_regs to userspace too. Maybe overloading these constants like this and making them depend on the kernel configuration is not a good idea for userspace.
Maybe giving the V7M definitions a new prefix would be a better idea?
PATCH v4 3/3 Cortex-M3: Add support for exception handling
In reply to Uwe Kleine-KönigThis patch implements the exception handling for the ARMv7-M architecture (pretty different from the A or R profiles).
It bases on work done earlier by Catalin for 2.6.33 but was nearly completely rewritten to use a pt_regs layout compatible to the A profile.
---
Hello,
apart from rebasing on top of 3.4-rc1 this patch is unchanged compared to v3.
Best regards
Uwe
arch/arm/kernel/entry-common.S | 4 ++ arch/arm/kernel/entry-header.S | 148 ++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/entry-v7m.S | 134 ++++++++++++++++++++++++++++++++++++ arch/arm/kernel/process.c | 8 +++ arch/arm/kernel/ptrace.c | 3 + arch/arm/kernel/signal.c | 13 ++++ arch/arm/kernel/sys_arm.c | 1 + 7 files changed, 311 insertions(+) create mode 100644 arch/arm/kernel/entry-v7m.S
arch/arm/kernel/entry-common.S +4 -0
@@ -351,6 +351,9 @@ ENDPROC(ftrace_stub) .align 5 ENTRY(vector_swi) +#ifdef CONFIG_CPU_V7M + v7m_exception_entry +#else sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 ARM( add r8, sp, #S_PC )
@@ -361,6 +364,7 @@ ENTRY(vector_swi) str lr, [sp, #S_PC] @ Save calling PC str r8, [sp, #S_PSR] @ Save CPSR str r0, [sp, #S_OLD_R0] @ Save OLD_R0 +#endif zero_fp /*
arch/arm/kernel/entry-header.S +148 -0
166 lines not on this page · raw message
arch/arm/kernel/entry-v7m.S new file +134 -0
134 lines not on this page · raw message
arch/arm/kernel/process.c +8 -0
@@ -454,7 +454,11 @@ asm( ".pushsection .text\n"#ifdef CONFIG_TRACE_IRQFLAGS " bl trace_hardirqs_on\n"#endif +#ifdef CONFIG_CPU_V7M +" msr primask, r7\n" +#else " msr cpsr_c, r7\n" +#endif " mov r0, r4\n" " mov lr, r6\n" " mov pc, r5\n"
@@ -493,6 +497,10 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.ARM_r7 =SVC_MODE |PSR_ENDSTATE |PSR_ISETSTATE ; regs.ARM_pc = (unsigned long )kernel_thread_helper; regs.ARM_cpsr = regs.ARM_r7 |PSR_I_BIT ; +#if definedCONFIG_CPU_V7M +/* Return to Handler mode */ + regs.ARM_EXC_RET =0xfffffff1L ; +#endif return do_fork (flags|CLONE_VM |CLONE_UNTRACED ,0 , ®s,0 ,NULL ,NULL ); }
arch/arm/kernel/ptrace.c +3 -0
@@ -82,6 +82,9 @@ static const struct pt_regs_offset regoffset_table[] = {REG_OFFSET_NAME (pc),REG_OFFSET_NAME (cpsr),REG_OFFSET_NAME (ORIG_r0), +#ifdef CONFIG_CPU_V7M +REG_OFFSET_NAME (EXC_RET ), +#endif REG_OFFSET_END, };
arch/arm/kernel/signal.c +13 -0
@@ -278,6 +278,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)sigset_t set;int err; +pr_info ("%s(regs=%p)\n" , __func__, regs); + err =__copy_from_user (&set, &sf->uc.uc_sigmask,sizeof (set));if (err ==0 ) {sigdelsetmask (&set, ~_BLOCKABLE);
@@ -325,6 +327,7 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs) {struct sigframe __user *frame; +pr_info ("%s(regs=%p)\n" , __func__, regs);/* Always make any pending restarted system calls return -EINTR */ current_thread_info ()->restart_block.fn = do_no_restart_syscall;
@@ -355,6 +358,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) {struct rt_sigframe __user *frame; +pr_info ("%s(regs=%p)\n" , __func__, regs);/* Always make any pending restarted system calls return -EINTR */ current_thread_info ()->restart_block.fn = do_no_restart_syscall;
@@ -439,6 +443,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize)unsigned long sp = regs->ARM_sp;void __user *frame; +pr_info ("%s(regs=%p)\n" , __func__, regs);/* * This is the X/Open sanctioned signal stack switching. */
@@ -468,6 +473,8 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,int thumb =0 ;unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f |PSR_E_BIT ); +pr_info ("%s(regs=%p)\n" , __func__, regs); + cpsr |=PSR_ENDSTATE ;/*
@@ -540,6 +547,8 @@ setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regstruct sigframe __user *frame =get_sigframe (ka, regs,sizeof (*frame));int err =0 ; +pr_info ("%s(regs=%p)\n" , __func__, regs); +if (!frame)return 1 ;
@@ -563,6 +572,8 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,stack_t stack;int err =0 ; +pr_info ("%s(regs=%p)\n" , __func__, regs); +if (!frame)return 1 ;
@@ -607,6 +618,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,int usig = sig;int ret; +pr_info ("%s(regs=%p)\n" , __func__, regs);/* * translate the signal */
@@ -776,6 +788,7 @@ static void do_signal(struct pt_regs *regs, int syscall) asmlinkage voiddo_notify_resume (struct pt_regs *regs,unsigned int thread_flags,int syscall) { +pr_info ("%s(regs=%p)\n" , __func__, regs);if (thread_flags & _TIF_SIGPENDING)do_signal (regs, syscall);
arch/arm/kernel/sys_arm.c +1 -0
@@ -102,6 +102,7 @@ int kernel_execve(const char *filename,* We were successful. We won't be returning to our caller, but * instead to user space by manipulating the kernel stack. */ +pr_info ("we were successful\n" ); asm("add r0, %0, %1\n\t" "mov r1, %2\n\t" "mov r2, %3\n\t"
Signature · 1 line
1.7.9.5
v4 cover ARM: Initial support for Cortex-M3
In reply to Uwe Kleine-KönigHello,
in reply to the last post Arnd suggested to take this series early after the 3.4 merge window for next.
Now that 3.4-rc3 is out, I wonder if you (Russell) already found the time to look at the series?
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |
v4 cover ARM: Initial support for Cortex-M3
Hello Russell,
Quoted 5 lines · Uwe Kleine-K?nig
in reply to the last post Arnd suggested to take this series early after the 3.4 merge window for next.
Now that 3.4-rc3 is out, I wonder if you (Russell) already found the time to look at the series?
would it be ok for you if I put the series into your patch system just that it doesn't become forgotten?
Best regards
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |