Skip to contentSkip to conversation

ARM: omap_hdq: use wait_event_timeout to wait for read to complete.

PATCH In review NeilBrown 2 participants 3 messages Apr 25, 2012 – May 2, 2012 W1 dallas's 1-wire bus

lore
Share & tools
lore

NeilBrown

author
#0 lore raw

PATCH 2/2 ARM: omap_hdq: use wait_event_timeout to wait for read to complete.

There is no gain in having a loop - there is no risk of missing the interrupt with wait_event_timeout.

---
 drivers/w1/masters/omap_hdq.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/w1/masters/omap_hdq.c +6 -9
index 3356d75..eb01c7f 100644
@@ -357,7 +357,6 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 {
 	int ret = 0;
 	u8 status;
-	unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
 
 	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (ret < 0) {
@@ -375,15 +374,13 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
 		/*
-		 * The RX comes immediately after TX. It
-		 * triggers another interrupt before we
-		 * sleep. So we have to wait for RXCOMPLETE bit.
+		 * The RX comes immediately after TX.
 		 */
-		while (!(hdq_data->hdq_irqstatus
-			& OMAP_HDQ_INT_STATUS_RXCOMPLETE)
-			&& time_before(jiffies, timeout)) {
-			schedule_timeout_uninterruptible(1);
-		}
+		wait_event_timeout(hdq_wait_queue,
+				   (hdq_data->hdq_irqstatus
+				    & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				   OMAP_HDQ_TIMEOUT);
+
 		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
 			OMAP_HDQ_CTRL_STATUS_DIR);
 		status = hdq_data->hdq_irqstatus;
Signature · 1 line
1.7.10
#1 lore raw
Quoted 4 lines · NeilBrown

There is no gain in having a loop - there is no risk of missing the interrupt with wait_event_timeout.

Both patches look good, thank you
Feel free to add my ack if needed

Signature · 1 line
	Evgeniy Polyakov
author
#2 lore raw
Quoted 9 lines · On Wed, 2 May 2012 01:42:19 +0400 Evgeniy Polyakov <[email protected]> wrote:
Quoted 4 lines · NeilBrown

There is no gain in having a loop - there is no risk of missing the interrupt with wait_event_timeout.

Both patches look good, thank you
Feel free to add my ack if needed

Thanks. I'll add that and resent to GregKH.

NeilBrown