package read-edid, corrected patch
PATCH 1/1 package read-edid, corrected patch
Hi,
Here is the updated patch per comments by Thomas and Baruch.
Thanks.
---
package/Config.in +1 -0
@@ -210,6 +210,7 @@ source "package/openocd/Config.in" source "package/parted/Config.in" source "package/pciutils/Config.in" source "package/picocom/Config.in" +source "package/read-edid/Config.in" source "package/rng-tools/Config.in" source "package/sane-backends/Config.in" source "package/sdparm/Config.in"
package/read-edid/Config.in new file +4 -0
@@ -0,0 +1,15 @@ +config BR2_PACKAGE_READ_EDID + bool "read-edid" + help + Read-edid is a pair of tools (originally by John Fremlin) for
reading the EDID
+ from a monitor. It should work with most monitors made since 1996
(except for
+ newer ones with 256-byte EDID's - WiP), assuming the video card
supports the
+ standard read commands (most do). Read-edid is a set of two tools
- get-edid,
+ which gets the raw edid information from the monitor, and
parse-edid, which
+ turns the raw binary information into an XF86Config-compatible
monitor section.
+
+ http://polypux.org/projects/read-edid/
+
+depends on (BR2_i386)
+
+
package/read-edid/read-edid.mk new file +20 -0
@@ -0,0 +1,20 @@ +############################################ +# +# read-edid +# +############################################ + +READ_EDID_VERSION = 1.4.2 +READ_EDID_SITE = http://www.polypux.org/projects/read-edid/ + +define READ_EDID_BUILD_CMDS + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) +endef + +define READ_EDID_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid + $(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid +endef + +$(eval $(call AUTOTARGETS)) +
--
PATCH 1/1 package read-edid, corrected patch
Hi Dimitry,
Quoted 4 lines · Dimitry Golubovsky
Hi,
Here is the updated patch per comments by Thomas and Baruch.Thanks.
The text here should contain the patch changelog information. This goes directly to the git log. Other free text goes below...
Quoted 2 lines
Signed-off-by Dmitry Golubovsky <[email protected]>---
here.
Quoted 32 lines
package/Config.in +1
-0@@ -210,6 +210,7 @@ source "package/openocd/Config.in" source "package/parted/Config.in" source "package/pciutils/Config.in" source "package/picocom/Config.in" +source "package/read-edid/Config.in" source "package/rng-tools/Config.in" source "package/sane-backends/Config.in" source "package/sdparm/Config.in"package/read-edid/Config.in new file +4
-0@@ -0,0 +1,15 @@ +config BR2_PACKAGE_READ_EDID + bool "read-edid" + help + Read-edid is a pair of tools (originally by John Fremlin) forreading the EDID
package/read-edid/Config.in new file +1
-0+ from a monitor. It should work with most monitors made since 1996(except for
package/read-edid/Config.in new file +1
-0+ newer ones with 256-byte EDID's - WiP), assuming the video cardsupports the
package/read-edid/Config.in new file +2
-1+ standard read commands (most do). Read-edid is a set of two tools - get-edid, + which gets the raw edid information from the monitor, andparse-edid, which
package/read-edid/Config.in new file +1
-0+ turns the raw binary information into an XF86Config-compatible
Quoted 1 line
monitor section.
Your patch is line wrapped. I still suggest you to consider 'git send-email'.
package/read-edid/Config.in
Quoted 4 lines
package/read-edid/Config.in new file +4
-0+ + http://polypux.org/projects/read-edid/ + +depends on (BR2_i386)
This line should be placed just below the 'bool "read-edid"' line, and be tab indented. The help text should be indented with tab + 2 spaces.
Quoted 17 lines
package/read-edid/Config.in new file +2
-0+ +package/read-edid/read-edid.mk new file +9
-0@@ -0,0 +1,20 @@ +############################################ +# +# read-edid +# +############################################ + +READ_EDID_VERSION = 1.4.2 +READ_EDID_SITE = http://www.polypux.org/projects/read-edid/ +
package/read-edid/read-edid.mk line 19
Quoted 10 lines
package/read-edid/read-edid.mk new file +10
-0+define READ_EDID_BUILD_CMDS + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) +endef + +define READ_EDID_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/get-edid $(TARGET_DIR)/sbin/get-edid + $(INSTALL) -D -m 0755 $(@D)/parse-edid $(TARGET_DIR)/sbin/parse-edid +endef + +$(eval $(call AUTOTARGETS))
baruch
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH 1/1 package read-edid, corrected patch
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Baruch" == Baruch Siach <[email protected]> writes:
Hi,
Quoted 6 lines
Quoted 6 lines
package/read-edid/Config.in new file +3
-0+ bool "read-edid" + help + Read-edid is a pair of tools (originally by John Fremlin) forreading the EDID
(quoted diff) +1
-0+ from a monitor. It should work with most monitors made since 1996(except for
Quoted 8 lines
Quoted 8 lines
(quoted diff) +1
-0+ newer ones with 256-byte EDID's - WiP), assuming the video cardsupports the
(quoted diff) +2
-1+ standard read commands (most do). Read-edid is a set of two tools - get-edid, + which gets the raw edid information from the monitor, andparse-edid, which
(quoted diff) +1
-0+ turns the raw binary information into an XF86Config-compatiblemonitor section.
Baruch> Your patch is line wrapped. I still suggest you to consider 'git send-email'.
And please also wrap the help text at ~75 chars or so.
Signature · 1 line
Bye, Peter Korsgaard