Skip to contentSkip to conversation

mdadm v3.1.3 spare group does not work

DISCUSSION Johnson Yan 2 participants 6 messages May 8, 2012 MD RAID

lore
Share & tools
lore
#0 lore raw

Hi,
When I use mdadm v3.1.3, seems the spare group function can’t work. As I remember, this function in mdadm 2.6.5 works well.

Here is some info from /etc/mdadm.conf
…
ARRAY /dev/md0 level=raid1 spare-group=test11
ARRAY /dev/md1 level=raid1 spare-group=test11
…

And mdmonitor service is in running status:
[root@localhost tmp]# ps aux |grep mdadm
root      1794  0.0  0.0   6852   760 ?        Ss   16:52   0:00 mdadm -F -y -f -s -i /var/run/mdadm/mdadm.pid --delay=10

There is one spare disk in md0, and no spare in md1, if I fail the member disk in md1, the spare in md0 won’t migrate into md1.

Thank you very much.

Regards,
Johnson Yan

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw
Quoted 3 lines · On Tue, 8 May 2012 09:57:57 +0800 "Johnson Yan" <[email protected]> wrote:

Hi,
When I use mdadm v3.1.3, seems the spare group function can’t work. As I remember, this function in mdadm 2.6.5 works well.

Can you try mdadm 3.2.3 please (or is that what you meant?). Better still, try the current git version:

git clone git://github.com/neilbrown/mdadm
cd mdadm
make
make install

Thanks,
NeilBrown

Quoted 26 lines

Here is some info from /etc/mdadm.conf
…
ARRAY /dev/md0 level=raid1 spare-group=test11
ARRAY /dev/md1 level=raid1 spare-group=test11
…

And mdmonitor service is in running status:
[root@localhost tmp]# ps aux |grep mdadm
root      1794  0.0  0.0   6852   760 ?        Ss   16:52   0:00 mdadm -F -y -f -s -i /var/run/mdadm/mdadm.pid --delay=10

There is one spare disk in md0, and no spare in md1, if I fail the member disk in md1, the spare in md0 won’t migrate into md1.

Thank you very much.

Regards,
Johnson Yan

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw

Hi Neil,
Thank you for your advice, I tried 3.2.3, it still failed.

Regards,
Johnson Yan

-----Original Message-----
From: NeilBrown [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 10:20 AM
To: Johnson Yan
Cc: [email protected]
Subject: Re: mdadm v3.1.3 spare group does not work

Quoted 3 lines · On Tue, 8 May 2012 09:57:57 +0800 "Johnson Yan" <[email protected]> wrote:

Hi,
When I use mdadm v3.1.3, seems the spare group function can’t work. As I remember, this function in mdadm 2.6.5 works well.

Can you try mdadm 3.2.3 please (or is that what you meant?). Better still, try the current git version:

git clone git://github.com/neilbrown/mdadm
cd mdadm
make
make install

Thanks,
NeilBrown

Quoted 16 lines

Here is some info from /etc/mdadm.conf … ARRAY /dev/md0 level=raid1 spare-group=test11 ARRAY /dev/md1 level=raid1 spare-group=test11 …

And mdmonitor service is in running status:
[root@localhost tmp]# ps aux |grep mdadm root 1794 0.0 0.0
6852 760 ? Ss 16:52 0:00 mdadm -F -y -f -s -i
/var/run/mdadm/mdadm.pid --delay=10

There is one spare disk in md0, and no spare in md1, if I fail the member disk in md1, the spare in md0 won’t migrate into md1.

Thank you very much.

Quoted 7 lines

Regards,
Johnson Yan

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to NeilBrown

I tried mdadm 2.6.5, it can works well.

Regards,
Johnson Yan

-----Original Message-----
From: Johnson Yan [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 11:05 AM
To: 'NeilBrown'
Cc: '[email protected]'
Subject: RE: mdadm v3.1.3 spare group does not work

Hi Neil,
Thank you for your advice, I tried 3.2.3, it still failed.

Regards,
Johnson Yan

-----Original Message-----
From: NeilBrown [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 10:20 AM
To: Johnson Yan
Cc: [email protected]
Subject: Re: mdadm v3.1.3 spare group does not work

Quoted 3 lines · On Tue, 8 May 2012 09:57:57 +0800 "Johnson Yan" <[email protected]> wrote:

Hi,
When I use mdadm v3.1.3, seems the spare group function can’t work. As I remember, this function in mdadm 2.6.5 works well.

Can you try mdadm 3.2.3 please (or is that what you meant?). Better still, try the current git version:

git clone git://github.com/neilbrown/mdadm
cd mdadm
make
make install

Thanks,
NeilBrown

Quoted 16 lines

Here is some info from /etc/mdadm.conf … ARRAY /dev/md0 level=raid1 spare-group=test11 ARRAY /dev/md1 level=raid1 spare-group=test11 …

And mdmonitor service is in running status:
[root@localhost tmp]# ps aux |grep mdadm root 1794 0.0 0.0
6852 760 ? Ss 16:52 0:00 mdadm -F -y -f -s -i
/var/run/mdadm/mdadm.pid --delay=10

There is one spare disk in md0, and no spare in md1, if I fail the member disk in md1, the spare in md0 won’t migrate into md1.

Thank you very much.

Quoted 7 lines

Regards,
Johnson Yan

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw
In reply to NeilBrown

Hi Neil & All,
I tried mdadm 3.2.3 again with mdmonitor service restart, the spare group function is OK now. Mdadm v3.1.3 still can't work. Sorry for the inconvenience.

Regards,
Johnson Yan

-----Original Message-----
From: Johnson Yan [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 11:43 AM
To: 'NeilBrown'
Cc: '[email protected]'
Subject: RE: mdadm v3.1.3 spare group does not work

I tried mdadm 2.6.5, it can works well.

Regards,
Johnson Yan

-----Original Message-----
From: Johnson Yan [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 11:05 AM
To: 'NeilBrown'
Cc: '[email protected]'
Subject: RE: mdadm v3.1.3 spare group does not work

Hi Neil,
Thank you for your advice, I tried 3.2.3, it still failed.

Regards,
Johnson Yan

-----Original Message-----
From: NeilBrown [mailto:[email protected]]
Sent: Tuesday, May 08, 2012 10:20 AM
To: Johnson Yan
Cc: [email protected]
Subject: Re: mdadm v3.1.3 spare group does not work

Quoted 3 lines · On Tue, 8 May 2012 09:57:57 +0800 "Johnson Yan" <[email protected]> wrote:

Hi,
When I use mdadm v3.1.3, seems the spare group function can’t work. As I remember, this function in mdadm 2.6.5 works well.

Can you try mdadm 3.2.3 please (or is that what you meant?). Better still, try the current git version:

git clone git://github.com/neilbrown/mdadm
cd mdadm
make
make install

Thanks,
NeilBrown

Quoted 16 lines

Here is some info from /etc/mdadm.conf … ARRAY /dev/md0 level=raid1 spare-group=test11 ARRAY /dev/md1 level=raid1 spare-group=test11 …

And mdmonitor service is in running status:
[root@localhost tmp]# ps aux |grep mdadm root 1794 0.0 0.0
6852 760 ? Ss 16:52 0:00 mdadm -F -y -f -s -i
/var/run/mdadm/mdadm.pid --delay=10

There is one spare disk in md0, and no spare in md1, if I fail the member disk in md1, the spare in md0 won’t migrate into md1.

Thank you very much.

Quoted 7 lines

Regards,
Johnson Yan

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#5 lore raw
Quoted 3 lines · On Tue, 8 May 2012 17:53:08 +0800 "Johnson Yan" <[email protected]> wrote:

Hi Neil & All,
I tried mdadm 3.2.3 again with mdmonitor service restart, the spare group function is OK now. Mdadm v3.1.3 still can't work. Sorry for the inconvenience.

So it is fixed in 3.2.3 - good.
Thanks for letting me know.

NeilBrown