x86/platform changes for v3.5

new file mode 100644
index 0000000..2e2e75a
@@ -0,0 +1,19 @@
+#ifndef _ASM_PARISC_KBDLEDS_H
+#define _ASM_PARISC_KBDLEDS_H
+
+/*
+ * On HIL keyboards of PARISC machines there is no NumLock key and
+ * everyone expects the keypad to be used for numbers. That's why
+ * we can safely turn on the NUMLOCK bit.
+ */
+
+static inline int kbd_defleds(void)
+{
+#if defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD)
+	return 1 << VC_NUMLOCK;
+#else
+	return 0;
+#endif
+}
+
+#endif /* _ASM_PARISC_KBDLEDS_H */

index 40358c8..cf6083d 100644
@@ -57,14 +57,20 @@ static void copy_boot_params(void)
 }
 
 /*
- * Set the keyboard repeat rate to maximum.  Unclear why this
+ * Query the keyboard lock status as given by the BIOS, and
+ * set the keyboard repeat rate to maximum.  Unclear why the latter
  * is done here; this might be possible to kill off as stale code.
  */
-static void keyboard_set_repeat(void)
+static void keyboard_init(void)
 {
-	struct biosregs ireg;
+	struct biosregs ireg, oreg;
 	initregs(&ireg);
-	ireg.ax = 0x0305;
+
+	ireg.ah = 0x02;		/* Get keyboard status */
+	intcall(0x16, &ireg, &oreg);
+	boot_params.kbd_status = oreg.al;
+
+	ireg.ax = 0x0305;	/* Set keyboard repeat rate */
 	intcall(0x16, &ireg, NULL);
 }
 

@@ -151,8 +157,8 @@ void main(void)
 	/* Detect memory layout */
 	detect_memory();
 
-	/* Set keyboard repeat rate (why?) */
-	keyboard_set_repeat();
+	/* Set keyboard repeat rate (why?) and query the lock flags */
+	keyboard_init();
 
 	/* Query MCA information */
 	query_mca();

index 2f90c51..eb45aa6 100644
@@ -112,7 +112,8 @@ struct boot_params {
 	__u8  e820_entries;				/* 0x1e8 */
 	__u8  eddbuf_entries;				/* 0x1e9 */
 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
-	__u8  _pad6[6];					/* 0x1eb */
+	__u8  kbd_status;				/* 0x1eb */
+	__u8  _pad6[5];					/* 0x1ec */
 	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
 	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
 	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */

index 63a2a03..93e1c55 100644
@@ -5,8 +5,8 @@ struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
-#ifdef CONFIG_X86_64
-struct dma_map_ops *dma_ops;
+#ifdef CONFIG_X86_DEV_DMA_OPS
+	struct dma_map_ops *dma_ops;
 #endif
 #if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
 	void *iommu; /* hook for IOMMU specific extension */

index 4b4331d..61c0bd2 100644
@@ -30,7 +30,7 @@ extern struct dma_map_ops *dma_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-#ifdef CONFIG_X86_32
+#ifndef CONFIG_X86_DEV_DMA_OPS
 	return dma_ops;
 #else
 	if (unlikely(!dev) || !dev->archdata.dma_ops)

@@ -62,6 +62,12 @@ extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag,
 					struct dma_attrs *attrs);
 
+#ifdef CONFIG_X86_DMA_REMAP /* Platform code defines bridge-specific code */
+extern bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
+extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
+extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
+#else
+
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (!dev->dma_mask)

@@ -79,6 +85,7 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
 	return daddr;
 }
+#endif /* CONFIG_X86_DMA_REMAP */
 
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,

new file mode 100644
index 0000000..f27ac5f
@@ -0,0 +1,17 @@
+#ifndef _ASM_X86_KBDLEDS_H
+#define _ASM_X86_KBDLEDS_H
+
+/*
+ * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
+ * This seems a good reason to start with NumLock off. That's why on X86 we
+ * ask the bios for the correct state.
+ */
+
+#include <asm/setup.h>
+
+static inline int kbd_defleds(void)
+{
+	return boot_params.kbd_status & 0x20 ? (1 << VC_NUMLOCK) : 0;
+}
+
+#endif /* _ASM_X86_KBDLEDS_H */

index a1d804b..8eeb55a 100644
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
+#include <linux/smp.h>
 
 #include <asm/apic.h>
 #include <asm/pci-direct.h>

@@ -22,6 +23,8 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 
+#define TOPOLOGY_REGISTER_OFFSET 0x10
+
 #if defined CONFIG_PCI && defined CONFIG_PARAVIRT
 /*
  * Interrupt control on vSMPowered systems:

@@ -149,12 +152,49 @@ int is_vsmp_box(void)
 	return 0;
 }
 #endif
+
+static void __init vsmp_cap_cpus(void)
+{
+#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
+	void __iomem *address;
+	unsigned int cfg, topology, node_shift, maxcpus;
+
+	/*
+	 * CONFIG_X86_VSMP is not configured, so limit the number CPUs to the
+	 * ones present in the first board, unless explicitly overridden by
+	 * setup_max_cpus
+	 */
+	if (setup_max_cpus != NR_CPUS)
+		return;
+
+	/* Read the vSMP Foundation topology register */
+	cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
+	address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4);
+	if (WARN_ON(!address))
+		return;
+
+	topology = readl(address);
+	node_shift = (topology >> 16) & 0x7;
+	if (!node_shift)
+		/* The value 0 should be decoded as 8 */
+		node_shift = 8;
+	maxcpus = (topology & ((1 << node_shift) - 1)) + 1;
+
+	pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n",
+		maxcpus);
+	setup_max_cpus = maxcpus;
+	early_iounmap(address, 4);
+#endif
+}
+
 void __init vsmp_init(void)
 {
 	detect_vsmp_box();
 	if (!is_vsmp_box())
 		return;
 
+	vsmp_cap_cpus();
+
 	set_vsmp_pv_ops();
 	return;
 }

366 lines not on this page · raw message

78 lines not on this page · raw message

index 86dd1e3..b021a18 100644
@@ -53,17 +53,13 @@ extern void ctrl_alt_del(void);
 
 #define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
 
-/*
- * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
- * This seems a good reason to start with NumLock off. On HIL keyboards
- * of PARISC machines however there is no NumLock key and everyone expects the
- * keypad to be used for numbers.
- */
-
-#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
-#define KBD_DEFLEDS (1 << VC_NUMLOCK)
+#if defined(CONFIG_X86) || defined(CONFIG_PARISC)
+#include <asm/kbdleds.h>
 #else
-#define KBD_DEFLEDS 0
+static inline int kbd_defleds(void)
+{
+	return 0;
+}
 #endif
 
 #define KBD_DEFLOCK 0

@@ -1512,8 +1508,8 @@ int __init kbd_init(void)
 	int error;
 
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
-		kbd_table[i].ledflagstate = KBD_DEFLEDS;
-		kbd_table[i].default_ledflagstate = KBD_DEFLEDS;
+		kbd_table[i].ledflagstate = kbd_defleds();
+		kbd_table[i].default_ledflagstate = kbd_defleds();
 		kbd_table[i].ledmode = LED_SHOW_FLAGS;
 		kbd_table[i].lockstate = KBD_DEFLOCK;
 		kbd_table[i].slockstate = 0;

index c077aec..cfe8323 100644
@@ -95,6 +95,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group,
 
 /* CS5536_PM1_STS bits */
 #define CS5536_WAK_FLAG		(1 << 15)
+#define CS5536_RTC_FLAG		(1 << 10)
 #define CS5536_PWRBTN_FLAG	(1 << 8)
 
 /* CS5536_PM1_EN bits */