staging: comedi: adl_pci9111: factor out the find PCI device code
PATCH 1/1 staging: comedi: adl_pci9111: factor out the find PCI device code
Factor out the code that finds a matching PCI device from attach function.
Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ian Abbott <[email protected]>
Cc Mori Hess <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/adl_pci9111.c +49 -58
@@ -1210,17 +1210,47 @@ static int pci9111_reset(struct comedi_device *dev)return 0 ; } -/* Attach */ -/* - Register PCI device */ -/* - Declare device driver capability */ +static struct pci_dev *pci9111_find_pci (struct comedi_device *dev, +struct comedi_devconfig *it) +{ +struct pci_dev *pcidev =NULL ; +int bus = it->options[0 ]; +int slot = it->options[1 ]; +int i; + +for_each_pci_dev (pcidev) { +if (pcidev->vendor !=PCI_VENDOR_ID_ADLINK ) +continue ; +for (i =0 ; i < pci9111_board_nbr; i++) { +if (pcidev->device != pci9111_boards[i].device_id) +continue ; +if (bus || slot) { +/* requested particular bus/slot */ +if (pcidev->bus->number != bus || +PCI_SLOT (pcidev->devfn) != slot) +continue ; + } + dev->board_ptr = pci9111_boards + i; +printk (KERN_ERR +"comedi%d: found %s (b:s:f=%d:%d:%d), irq=%d\n" , + dev->minor, pci9111_boards[i].name, + pcidev->bus->number,PCI_SLOT (pcidev->devfn), +PCI_FUNC (pcidev->devfn), pcidev->irq); +return pcidev; + } + } +printk (KERN_ERR +"comedi%d: no supported board found! (req. bus/slot : %d/%d)\n" , + dev->minor, bus, slot); +return NULL ; +}static int pci9111_attach (struct comedi_device *dev,struct comedi_devconfig *it) {struct comedi_subdevice *subdevice;unsigned long io_base, io_range, lcr_io_base, lcr_io_range; -struct pci_dev *pci_device =NULL ; -int error, i; +int error;const struct pci9111_board *board;if (alloc_private (dev,sizeof (struct pci9111_private_data )) <0 )
@@ -1230,65 +1260,25 @@ static int pci9111_attach(struct comedi_device *dev,printk (KERN_ERR "comedi%d: " PCI9111_DRIVER_NAME " driver\n" , dev->minor); -for_each_pci_dev (pci_device) { -if (pci_device->vendor ==PCI_VENDOR_ID_ADLINK ) { -for (i =0 ; i < pci9111_board_nbr; i++) { -if (pci9111_boards[i].device_id == - pci_device->device) { -/* was a particular bus/slot -* requested? */ -if ((it->options[0 ] !=0 ) - || (it->options[1 ] !=0 )) { -/* are we on the wrong -* bus/slot? */ -if (pci_device->bus->number != - it->options[0 ] - || -PCI_SLOT (pci_device->devfn) - != it->options[1 ]) { -continue ; - } - } - - dev->board_ptr = pci9111_boards + i; - board = - (struct pci9111_board *) - dev->board_ptr; - dev_private->pci_device = pci_device; - goto found; - } - } - } - } - -printk (KERN_ERR -"comedi%d: no supported board found! (req. bus/slot : %d/%d)\n" , - dev->minor, it->options[0 ], it->options[1 ]); -return -EIO ; - -found: - -printk (KERN_ERR "comedi%d: found %s (b:s:f=%d:%d:%d) , irq=%d\n" , - dev->minor, - pci9111_boards[i].name, - pci_device->bus->number, -PCI_SLOT (pci_device->devfn), -PCI_FUNC (pci_device->devfn), pci_device->irq); + dev_private->pci_device =pci9111_find_pci (dev, it); +if (!dev_private->pci_device) +return -EIO ; + board = (struct pci9111_board *)dev->board_ptr;/* TODO: Warn about non-tested boards. */ /* Read local configuration register base address * [PCI_BASE_ADDRESS #1]. */ - lcr_io_base =pci_resource_start (pci_device,1 ); - lcr_io_range =pci_resource_len (pci_device,1 ); + lcr_io_base =pci_resource_start (dev_private->pci_device,1 ); + lcr_io_range =pci_resource_len (dev_private->pci_device,1 );printk ("comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n" , dev->minor, lcr_io_base, lcr_io_range);/* Enable PCI device and request regions */ -if (comedi_pci_enable (pci_device,PCI9111_DRIVER_NAME ) <0 ) { +if (comedi_pci_enable (dev_private->pci_device,PCI9111_DRIVER_NAME ) <0 ) {printk ("comedi%d: Failed to enable PCI device and request regions\n" , dev->minor);
@@ -1296,8 +1286,8 @@ found: }/* Read PCI6308 register base address [PCI_BASE_ADDRESS #2]. */ - io_base =pci_resource_start (pci_device,2 ); - io_range =pci_resource_len (pci_device,2 ); + io_base =pci_resource_start (dev_private->pci_device,2 ); + io_range =pci_resource_len (dev_private->pci_device,2 );printk (KERN_ERR "comedi%d: 6503 registers at address 0x%4lx [0x%4lx]\n" , dev->minor, io_base, io_range);
@@ -1314,16 +1304,17 @@ found:/* Irq setup */ dev->irq =0 ; -if (pci_device->irq >0 ) { -if (request_irq (pci_device->irq, pci9111_interrupt, +if (dev_private->pci_device->irq >0 ) { + dev->irq = dev_private->pci_device->irq; + +if (request_irq (dev->irq, pci9111_interrupt,IRQF_SHARED ,PCI9111_DRIVER_NAME , dev) !=0 ) {printk (KERN_ERR "comedi%d: unable to allocate irq %u\n" , - dev->minor, pci_device->irq); + dev->minor, dev->irq);return -EINVAL ; } } - dev->irq = pci_device->irq;/* TODO: Add external multiplexer setup (according to option[2]). */