LCD: support another s6e8ax0 panel type
Subsystems (3)
PATCH 1/1 LCD: support another s6e8ax0 panel type
s6e8ax0 panel has many panel of types. This patch support another panel on TIZEN lunchbox board(HWREVISION 2). This panel has reversed panel display type. So, I had added necessary command.
--- arch/arm/include/asm/arch-exynos/mipi_dsim.h | 1 + board/samsung/trats/trats.c | 8 ++++++++ drivers/video/s6e8ax0.c | 17 ++++++++++++++++- 3 files changed, 25 insertions(+), 1 deletions(-)
arch/arm/include/asm/arch-exynos/mipi_dsim.h +1 -0
@@ -329,6 +329,7 @@ struct mipi_dsim_lcd_device {char *name;int id;int bus_id; +int reverse_panel;struct mipi_dsim_device *master;void *platform_data;
board/samsung/trats/trats.c +8 -0
@@ -54,6 +54,11 @@ u32 get_board_rev(void)static void check_hw_revision (void ); +static int hwrevision (int rev) +{ +return (board_rev &0xf ) == rev; +} +int board_init (void ) { gd->bd->bi_boot_params =PHYS_SDRAM_1 +0x100 ;
@@ -505,6 +510,9 @@ vidinfo_t panel_info = {void init_panel_info (vidinfo_t *vid) { +if (hwrevision (2 )) + mipi_lcd_device.reverse_panel =1 ; +strcpy (s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name); s6e8ax0_platform_data.lcd_power = lcd_power; s6e8ax0_platform_data.mipi_power = mipi_power;
drivers/video/s6e8ax0.c +16 -1
@@ -28,6 +28,7 @@static void s6e8ax0_panel_cond (struct mipi_dsim_device *dsim_dev) {struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; +int reverse = dsim_dev->dsim_lcd_dev->reverse_panel;const unsigned char data_to_send[] = {0xf8 ,0x3d ,0x35 ,0x00 ,0x00 ,0x00 ,0x8d ,0x00 ,0x4c ,0x6e ,0x10 ,0x27 ,0x7d ,0x3f ,0x10 ,0x00 ,0x00 ,0x20 ,
@@ -36,8 +37,22 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev) 0xff, 0xff, 0xc8 }; - ops->cmd_write (dsim_dev,MIPI_DSI_DCS_LONG_WRITE , +const unsigned char data_to_send_reverse[] = { +0xf8 ,0x19 ,0x35 ,0x00 ,0x00 ,0x00 ,0x93 ,0x00 ,0x3c , +0x7d ,0x08 ,0x27 ,0x7d ,0x3f ,0x00 ,0x00 ,0x00 ,0x20 , +0x04 ,0x08 ,0x6e ,0x00 ,0x00 ,0x00 ,0x02 ,0x08 ,0x08 , +0x23 ,0x23 ,0xc0 ,0xc1 ,0x01 ,0x41 ,0xc1 ,0x00 ,0xc1 , +0xf6 ,0xf6 ,0xc1 + }; + +if (reverse) { + ops->cmd_write (dsim_dev,MIPI_DSI_DCS_LONG_WRITE , + (unsigned int )data_to_send_reverse, +ARRAY_SIZE (data_to_send_reverse)); + }else { + ops->cmd_write (dsim_dev,MIPI_DSI_DCS_LONG_WRITE , (unsigned int )data_to_send,ARRAY_SIZE (data_to_send)); + } }static void s6e8ax0_display_cond (struct mipi_dsim_device *dsim_dev)
Signature · 1 line
1.7.4.1
PATCH 1/1 LCD: support another s6e8ax0 panel type
Quoted 4 lines · Donghwa Lee
s6e8ax0 panel has many panel of types. This patch support another panel on TIZEN lunchbox board(HWREVISION 2). This panel has reversed panel display type. So, I had added necessary command.
Quoted 8 lines
Signed-off-by Donghwa Lee <[email protected]>Signed-off-by Kyungmin Park <[email protected]>---
?arch/arm/include/asm/arch-exynos/mipi_dsim.h | ? ?1 + ?board/samsung/trats/trats.c ? ? ? ? ? ? ? ? ?| ? ?8 ++++++++ ?drivers/video/s6e8ax0.c ? ? ? ? ? ? ? ? ? ? ?| ? 17 ++++++++++++++++-?3 files changed, 25 insertions(+), 1 deletions(-)
Signature · 2 lines
from. prom. www.promsoft.net
PATCH 1/1 LCD: support another s6e8ax0 panel type
In reply to Donghwa LeeHi,
Quoted 11 lines · On Fri, 27 Apr 2012 13:52:26 +0900 Donghwa Lee <[email protected]> wrote:
s6e8ax0 panel has many panel of types. This patch support another panel on TIZEN lunchbox board(HWREVISION 2). This panel has reversed panel display type. So, I had added necessary command.
Signed-off-by Donghwa Lee <[email protected]>Signed-off-by Kyungmin Park <[email protected]>--- arch/arm/include/asm/arch-exynos/mipi_dsim.h | 1 + board/samsung/trats/trats.c | 8 ++++++++ drivers/video/s6e8ax0.c | 17 ++++++++++++++++- 3 files changed, 25 insertions(+), 1 deletions(-)
Applied to u-boot-video/master after rebasing. Thanks!
Anatolij