warn_slowpath_common in drivers/pci/search.c:44 on linux-3.4.0
Hello,
I'm getting this warning with linux-3.4.0. My laptop is a DELL E5420. Please tell me if you need further testing/debug.
Cheers,
[ 1.054279] WARNING: at drivers/pci/search.c:44 pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420 [ 1.054457] Modules linked in: [ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3 [ 1.054643] Call Trace: [ 1.054716] [<ffffffff81033d4a>] warn_slowpath_common+0x7a/0xb0 [ 1.054793] [<ffffffff81033d95>] warn_slowpath_null+0x15/0x20 [ 1.054869] [<ffffffff8123899e>] pci_find_upstream_pcie_bridge+0x5e/0x70 [ 1.054949] [<ffffffff813babe7>] intel_iommu_device_group+0x77/0x100 [ 1.055027] [<ffffffff813b52d5>] add_iommu_group+0x35/0x60 [ 1.055113] [<ffffffff813b52a0>] ? bus_set_iommu+0x50/0x50 [ 1.055191] [<ffffffff8132c586>] bus_for_each_dev+0x56/0x90 [ 1.055267] [<ffffffff813b528b>] bus_set_iommu+0x3b/0x50 [ 1.055344] [<ffffffff818c4920>] intel_iommu_init+0xab0/0xb3f [ 1.055421] [<ffffffff81120b26>] ? sys_mkdirat+0x76/0xd0 [ 1.055499] [<ffffffff8189b0db>] ? memblock_find_dma_reserve+0x13d/0x13d [ 1.055578] [<ffffffff8189b0ee>] pci_iommu_init+0x13/0x3e [ 1.055655] [<ffffffff810001ca>] do_one_initcall+0x3a/0x170 [ 1.055732] [<ffffffff81897c35>] kernel_init+0x148/0x1cc [ 1.055807] [<ffffffff81897588>] ? do_early_param+0x86/0x86 [ 1.055884] [<ffffffff814fc914>] kernel_thread_helper+0x4/0x10 [ 1.055963] [<ffffffff8105de60>] ? finish_task_switch+0x80/0x110 [ 1.056040] [<ffffffff814fafdd>] ? retint_restore_args+0xe/0xe [ 1.056126] [<ffffffff81897aed>] ? start_kernel+0x30b/0x30b [ 1.056203] [<ffffffff814fc910>] ? gs_change+0xb/0xb
Signature · 4 lines
Antonio Quartulli ..each of us alone is worth nothing.. Ernesto "Che" Guevara
Bjorn Helgaas
maintainerQuoted 4 lines · Antonio Quartulli
Hello,
I'm getting this warning with linux-3.4.0. My laptop is a DELL E5420. Please tell me if you need further testing/debug.
Hi Antonio,
Thanks for the report. Is this a regression? If so, what's the most recent kernel that works correctly? Can you collect a complete dmesg log and the output of "lspci -vv"?
Quoted 33 lines
[ 1.054279] WARNING: at
drivers/pci/search.c:44pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420
[ 1.054457] Modules linked in:
[ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3
[ 1.054643] Call Trace:
[ 1.054716] [<ffffffff81033d4a>]warn_slowpath_common+0x7a/0xb0
[ 1.054793] [<ffffffff81033d95>]warn_slowpath_null+0x15/0x20
[ 1.054869] [<ffffffff8123899e>]pci_find_upstream_pcie_bridge+0x5e/0x70[ 1.054949] [<ffffffff813babe7>]intel_iommu_device_group+0x77/0x100
[ 1.055027] [<ffffffff813b52d5>]add_iommu_group+0x35/0x60
[ 1.055113] [<ffffffff813b52a0>] ?bus_set_iommu+0x50/0x50
[ 1.055191] [<ffffffff8132c586>]bus_for_each_dev+0x56/0x90
[ 1.055267] [<ffffffff813b528b>]bus_set_iommu+0x3b/0x50
[ 1.055344] [<ffffffff818c4920>]intel_iommu_init+0xab0/0xb3f
[ 1.055421] [<ffffffff81120b26>] ?sys_mkdirat+0x76/0xd0
[ 1.055499] [<ffffffff8189b0db>] ?memblock_find_dma_reserve+0x13d/0x13d[ 1.055578] [<ffffffff8189b0ee>]pci_iommu_init+0x13/0x3e
[ 1.055655] [<ffffffff810001ca>]do_one_initcall+0x3a/0x170
[ 1.055732] [<ffffffff81897c35>]kernel_init+0x148/0x1cc
[ 1.055807] [<ffffffff81897588>] ?do_early_param+0x86/0x86
[ 1.055884] [<ffffffff814fc914>]kernel_thread_helper+0x4/0x10
[ 1.055963] [<ffffffff8105de60>] ?finish_task_switch+0x80/0x110
[ 1.056040] [<ffffffff814fafdd>] ?retint_restore_args+0xe/0xe
[ 1.056126] [<ffffffff81897aed>] ?start_kernel+0x30b/0x30b
[ 1.056203] [<ffffffff814fc910>] ?gs_change+0xb/0xb--
Antonio Quartulli..each of us alone is worth nothing..
Ernesto "Che" Guevara
Hi Antonio,
Quoted 18 lines · Bjorn Helgaas
Quoted 17 lines · Antonio Quartulli
[ 1.054279] WARNING: at
drivers/pci/search.c:44pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420
[ 1.054457] Modules linked in:
[ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3
[ 1.054643] Call Trace:
[ 1.054716] [<ffffffff81033d4a>]warn_slowpath_common+0x7a/0xb0
[ 1.054793] [<ffffffff81033d95>]warn_slowpath_null+0x15/0x20
[ 1.054869] [<ffffffff8123899e>]pci_find_upstream_pcie_bridge+0x5e/0x70[ 1.054949] [<ffffffff813babe7>]intel_iommu_device_group+0x77/0x100
[ 1.055027] [<ffffffff813b52d5>]add_iommu_group+0x35/0x60
[ 1.055113] [<ffffffff813b52a0>] ?bus_set_iommu+0x50/0x50
[ 1.055191] [<ffffffff8132c586>]bus_for_each_dev+0x56/0x90
[ 1.055267] [<ffffffff813b528b>]bus_set_iommu+0x3b/0x50
[ 1.055344] [<ffffffff818c4920>]intel_iommu_init+0xab0/0xb3f
[ 1.055421] [<ffffffff81120b26>] ?sys_mkdirat+0x76/0xd0
[ 1.055499] [<ffffffff8189b0db>] ?memblock_find_dma_reserve+0x13d/0x13d[ 1.055578] [<ffffffff8189b0ee>]pci_iommu_init+0x13/0x3e
Quoted 8 lines
Quoted 8 lines
[ 1.055655] [<ffffffff810001ca>]
do_one_initcall+0x3a/0x170[ 1.055732] [<ffffffff81897c35>]kernel_init+0x148/0x1cc[ 1.055807] [<ffffffff81897588>] ?do_early_param+0x86/0x86[ 1.055884] [<ffffffff814fc914>]kernel_thread_helper+0x4/0x10[ 1.055963] [<ffffffff8105de60>] ?finish_task_switch+0x80/0x110[ 1.056040] [<ffffffff814fafdd>] ?retint_restore_args+0xe/0xe[ 1.056126] [<ffffffff81897aed>] ?start_kernel+0x30b/0x30b[ 1.056203] [<ffffffff814fc910>] ?gs_change+0xb/0xb
Hmm, this looks like pci_find_upstream_pcie_bridge() found a PCIe device in the chain which is not a bridge. Can you please post the output of 'lspci -vvv' and 'lspci -t'?
Thanks,
Joerg
Signature · 5 lines
AMD Operating System Research Center Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach General Managers: Alberto Bozzo Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632
Hello,
Sorry but I didn't have enough time to test older version of the kernel to see whether this was a regression or not.
Quoted 30 lines · Joerg Roedel
Hi Antonio,
Quoted 18 lines · Bjorn Helgaas
Quoted 17 lines · Antonio Quartulli
[ 1.054279] WARNING: at
drivers/pci/search.c:44pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420
[ 1.054457] Modules linked in:
[ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3
[ 1.054643] Call Trace:
[ 1.054716] [<ffffffff81033d4a>]warn_slowpath_common+0x7a/0xb0
[ 1.054793] [<ffffffff81033d95>]warn_slowpath_null+0x15/0x20
[ 1.054869] [<ffffffff8123899e>]pci_find_upstream_pcie_bridge+0x5e/0x70[ 1.054949] [<ffffffff813babe7>]intel_iommu_device_group+0x77/0x100
[ 1.055027] [<ffffffff813b52d5>]add_iommu_group+0x35/0x60
[ 1.055113] [<ffffffff813b52a0>] ?bus_set_iommu+0x50/0x50
[ 1.055191] [<ffffffff8132c586>]bus_for_each_dev+0x56/0x90
[ 1.055267] [<ffffffff813b528b>]bus_set_iommu+0x3b/0x50
[ 1.055344] [<ffffffff818c4920>]intel_iommu_init+0xab0/0xb3f
[ 1.055421] [<ffffffff81120b26>] ?sys_mkdirat+0x76/0xd0
[ 1.055499] [<ffffffff8189b0db>] ?memblock_find_dma_reserve+0x13d/0x13d[ 1.055578] [<ffffffff8189b0ee>]pci_iommu_init+0x13/0x3eQuoted 8 lines
Quoted 8 lines
[ 1.055655] [<ffffffff810001ca>]
do_one_initcall+0x3a/0x170[ 1.055732] [<ffffffff81897c35>]kernel_init+0x148/0x1cc[ 1.055807] [<ffffffff81897588>] ?do_early_param+0x86/0x86[ 1.055884] [<ffffffff814fc914>]kernel_thread_helper+0x4/0x10[ 1.055963] [<ffffffff8105de60>] ?finish_task_switch+0x80/0x110[ 1.056040] [<ffffffff814fafdd>] ?retint_restore_args+0xe/0xe[ 1.056126] [<ffffffff81897aed>] ?start_kernel+0x30b/0x30b[ 1.056203] [<ffffffff814fc910>] ?gs_change+0xb/0xb
Quoted 4 lines
Hmm, this looks like
pci_find_upstream_pcie_bridge()found a PCIe device in the chain which is not a bridge. Can you please post the output of 'lspci -vvv' and 'lspci -t'?
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.
I hope my lspci output will help!
Cheers,
Quoted 10 lines
Thanks,
Joerg
Signature · 5 lines
AMD Operating System Research Center Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach General Managers: Alberto Bozzo Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632
Signature · 4 lines
Antonio Quartulli ..each of us alone is worth nothing.. Ernesto "Che" Guevara
-[0000:00]-+-00.0
+-02.0
+-16.0
+-1a.0
+-1b.0
+-1c.0-[01]--
+-1c.1-[02]----00.0
+-1c.2-[03-08]----00.0
+-1c.5-[09]--+-00.0
| +-00.1
| \-00.2
+-1c.6-[0a-11]----00.0
+-1d.0
+-1f.0
+-1f.2
\-1f.300:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 049b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at e2800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 8000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e5480000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e5450000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e5440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00338 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 049b
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e5300000-e53fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 049b
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: e2c00000-e40fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 049b
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e5200000-e52fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 049b
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=11, sec-latency=0
I/O behind bridge: 00002000-00005fff
Memory behind bridge: e4100000-e51fffff
Prefetchable memory behind bridge: 00000000e1400000-00000000e24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #7, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #6, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device 049b
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e5430000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
Subsystem: Dell Device 049b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 049b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 43 Region 0: I/O ports at 80b0 [size=8] Region 1: I/O ports at 80a0 [size=4] Region 2: I/O ports at 8090 [size=8] Region 3: I/O ports at 8080 [size=4] Region 4: I/O ports at 8060 [size=32] Region 5: Memory at e5420000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee002f8 Data: 0000 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Dell Device 049b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e5410000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 8040 [size=32]
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e5300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00358 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number a0-88-b4-ff-ff-6f-4e-2c
Kernel driver in use: iwlwifi
03:00.0 CardBus bridge: O2 Micro, Inc. Device 8134 (rev 06)
Subsystem: Dell Device 049b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e4030000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: e2c00000-e3ffffff (prefetchable)
Memory window 1: e0000000-e13fffff
I/O window 0: 00006400-000064ff
I/O window 1: 00006000-000060ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
09:00.0 FireWire (IEEE 1394): O2 Micro, Inc. 1394 OHCI Compliant Host Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e5230000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
09:00.1 SD Host controller: O2 Micro, Inc. Integrated MMC/SD controller (rev 05) (prog-if 01)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at e5220000 (32-bit, non-prefetchable) [size=512]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
09:00.2 Mass storage controller: O2 Micro, Inc. O2 Flash Memory Card (rev 05)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e5210000 (32-bit, non-prefetchable) [size=1K]
Region 2: Memory at e5200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [200 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
0a:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe (rev 10)
Subsystem: Dell Device 049b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at e4110000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at e4100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [40] Vital Product Data
Product Name: B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/\x00B�/ Unknown small resource type 00, will not decode more.
Capabilities: [60] Vendor Specific Information: Len=6c <?>
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 8669843417800280 Data: 9400
Capabilities: [cc] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number d0-67-e5-ff-fe-2f-a6-d1
Capabilities: [16c v1] Power Budgeting <?>
Quoted 3 lines · Antonio Quartulli
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.
Hmm, looks like device 03:00.0 is a 32bit PCI device attached to device 00:1c.2 which calls itself a Root Port instead of a PCI Bridge. I am not sure if the check in search.c is really necessary. As I see it there are also other possible pcie_types like PCI_EXP_TYPE_PCIE_BRIDGE. Putting Anil Keshavamurthy on Cc.
Anil, is this check in pci_find_upstream_pcie_bridge() really necessary:
/* PCI device should connect to a PCIe bridge */
if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) {
/* Busted hardware? */
WARN_ON_ONCE(1);
return NULL;
}? In the warning that triggers for Antonio the value of pcie_type seems to be PCI_EXP_TYPE_ROOT_PORT and from the available types I think that PCI_EXP_TYPE_PCIE_BRIDGE is also possible.
Thanks,
Joerg
Signature · 5 lines
AMD Operating System Research Center Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach General Managers: Alberto Bozzo Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632
Quoted 21 lines · Joerg Roedel
Quoted 3 lines · Antonio Quartulli
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.Hmm, looks like device 03:00.0 is a 32bit PCI device attached to device 00:1c.2 which calls itself a Root Port instead of a PCI Bridge. I am not sure if the check in
search.cis really necessary. As I see it there are also other possiblepcie_typeslikePCI_EXP_TYPE_PCIE_BRIDGE. Putting Anil Keshavamurthy on Cc.Anil, is this check in
pci_find_upstream_pcie_bridge()really necessary:/* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); return NULL; }
Quoted 3 lines
? In the warning that triggers for Antonio the value of
pcie_typeseems to bePCI_EXP_TYPE_ROOT_PORTand from the available types I think thatPCI_EXP_TYPE_PCIE_BRIDGEis also possible.
It seems that device 00:1c.2 is a real PCIe root port, and device 03:00.0 is a CardBus bridge. Should we call device 03:00.0 as Legacy Endpoint here? Could a PCIe legacy endpoint be directly connected to root port and downstream port? If the answer is yes, the assumption in pci_find_upstream_pcie_bridge()
BTW, does PCI_EXP_TYPE_PCIE_BRIDGE mean PCI/PCI-X to PCIe bridge? Do we really have such chipsets?
Thanks
Gerry
Quoted 5 lines
Thanks,
Joerg
Hello people,
Quoted 26 lines · Jiang Liu <liuj97 <at> gmail.com> writes:
Quoted 21 lines · Joerg Roedel
Quoted 3 lines · Antonio Quartulli
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.Hmm, looks like device 03:00.0 is a 32bit PCI device attached to device 00:1c.2 which calls itself a Root Port instead of a PCI Bridge. I am not sure if the check in
search.cis really necessary. As I see it there are also other possiblepcie_typeslikePCI_EXP_TYPE_PCIE_BRIDGE. Putting Anil Keshavamurthy on Cc.Anil, is this check in
pci_find_upstream_pcie_bridge()really necessary:/* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); return NULL; }Quoted 3 lines
? In the warning that triggers for Antonio the value of
pcie_typeseems to bePCI_EXP_TYPE_ROOT_PORTand from the available types I think thatPCI_EXP_TYPE_PCIE_BRIDGEis also possible.
Quoted 8 lines
It seems that device 00:1c.2 is a real PCIe root port, and device 03:00.0 is a CardBus bridge. Should we call device 03:00.0 as Legacy Endpoint here? Could a PCIe legacy endpoint be directly connected to root port and downstream port? If the answer is yes, the assumption in
pci_find_upstream_pcie_bridge()BTW, does
PCI_EXP_TYPE_PCIE_BRIDGEmean PCI/PCI-X to PCIe bridge? Do we really have such chipsets?
It has been a while that we did not discuss the issue :) Today, while checking my dmesg, I've seen the same warning. Now I am running linux-3.8.4.
Did we/you find any possible answer to how to proceed given the existante of the configuration that is triggering the warning?
Let me know if you want me to test any code.
Thanks a lot.
Cheers,
Quoted 36 lines · Antonio Quartulli
Quoted 30 lines · Joerg Roedel
Hi Antonio,
Quoted 18 lines · Bjorn Helgaas
Quoted 17 lines · Antonio Quartulli
[ 1.054279] WARNING: at drivers/pci/search.c:44 pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420 [ 1.054457] Modules linked in: [ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3 [ 1.054643] Call Trace: [ 1.054716] [<ffffffff81033d4a>] warn_slowpath_common+0x7a/0xb0 [ 1.054793] [<ffffffff81033d95>] warn_slowpath_null+0x15/0x20 [ 1.054869] [<ffffffff8123899e>] pci_find_upstream_pcie_bridge+0x5e/0x70 [ 1.054949] [<ffffffff813babe7>] intel_iommu_device_group+0x77/0x100 [ 1.055027] [<ffffffff813b52d5>] add_iommu_group+0x35/0x60 [ 1.055113] [<ffffffff813b52a0>] ? bus_set_iommu+0x50/0x50 [ 1.055191] [<ffffffff8132c586>] bus_for_each_dev+0x56/0x90 [ 1.055267] [<ffffffff813b528b>] bus_set_iommu+0x3b/0x50 [ 1.055344] [<ffffffff818c4920>] intel_iommu_init+0xab0/0xb3f [ 1.055421] [<ffffffff81120b26>] ? sys_mkdirat+0x76/0xd0 [ 1.055499] [<ffffffff8189b0db>] ? memblock_find_dma_reserve+0x13d/0x13d [ 1.055578] [<ffffffff8189b0ee>] pci_iommu_init+0x13/0x3eQuoted 8 lines
Quoted 8 lines
[ 1.055655] [<ffffffff810001ca>] do_one_initcall+0x3a/0x170 [ 1.055732] [<ffffffff81897c35>] kernel_init+0x148/0x1cc [ 1.055807] [<ffffffff81897588>] ? do_early_param+0x86/0x86 [ 1.055884] [<ffffffff814fc914>] kernel_thread_helper+0x4/0x10 [ 1.055963] [<ffffffff8105de60>] ? finish_task_switch+0x80/0x110 [ 1.056040] [<ffffffff814fafdd>] ? retint_restore_args+0xe/0xe [ 1.056126] [<ffffffff81897aed>] ? start_kernel+0x30b/0x30b [ 1.056203] [<ffffffff814fc910>] ? gs_change+0xb/0xbQuoted 4 lines
Hmm, this looks like
pci_find_upstream_pcie_bridge()found a PCIe device in the chain which is not a bridge. Can you please post the output of 'lspci -vvv' and 'lspci -t'?
Quoted 8 lines
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.I hope my lspci output will help!
Cheers,
Hi guys,
was there any progress about this?
Right now I am using linux-3.10.22 and the WARNING is still present. The system seems to be working fine, but I don't know if this issue can trigger side effects or not.
Cheers,
Signature · 1 line
Antonio Quartulli
A message that is not in the archive (sent off-list or not yet received): [email protected]
[+cc Alex]
Quoted 46 lines · Antonio Quartulli
Quoted 36 lines · Antonio Quartulli
Quoted 30 lines · Joerg Roedel
Hi Antonio,
Quoted 18 lines · Bjorn Helgaas
Quoted 17 lines · Antonio Quartulli
[ 1.054279] WARNING: at drivers/pci/search.c:44 pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420 [ 1.054457] Modules linked in: [ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3 [ 1.054643] Call Trace: [ 1.054716] [<ffffffff81033d4a>] warn_slowpath_common+0x7a/0xb0 [ 1.054793] [<ffffffff81033d95>] warn_slowpath_null+0x15/0x20 [ 1.054869] [<ffffffff8123899e>] pci_find_upstream_pcie_bridge+0x5e/0x70 [ 1.054949] [<ffffffff813babe7>] intel_iommu_device_group+0x77/0x100 [ 1.055027] [<ffffffff813b52d5>] add_iommu_group+0x35/0x60 [ 1.055113] [<ffffffff813b52a0>] ? bus_set_iommu+0x50/0x50 [ 1.055191] [<ffffffff8132c586>] bus_for_each_dev+0x56/0x90 [ 1.055267] [<ffffffff813b528b>] bus_set_iommu+0x3b/0x50 [ 1.055344] [<ffffffff818c4920>] intel_iommu_init+0xab0/0xb3f [ 1.055421] [<ffffffff81120b26>] ? sys_mkdirat+0x76/0xd0 [ 1.055499] [<ffffffff8189b0db>] ? memblock_find_dma_reserve+0x13d/0x13d [ 1.055578] [<ffffffff8189b0ee>] pci_iommu_init+0x13/0x3eQuoted 8 lines
Quoted 8 lines
[ 1.055655] [<ffffffff810001ca>] do_one_initcall+0x3a/0x170 [ 1.055732] [<ffffffff81897c35>] kernel_init+0x148/0x1cc [ 1.055807] [<ffffffff81897588>] ? do_early_param+0x86/0x86 [ 1.055884] [<ffffffff814fc914>] kernel_thread_helper+0x4/0x10 [ 1.055963] [<ffffffff8105de60>] ? finish_task_switch+0x80/0x110 [ 1.056040] [<ffffffff814fafdd>] ? retint_restore_args+0xe/0xe [ 1.056126] [<ffffffff81897aed>] ? start_kernel+0x30b/0x30b [ 1.056203] [<ffffffff814fc910>] ? gs_change+0xb/0xbQuoted 4 lines
Hmm, this looks like
pci_find_upstream_pcie_bridge()found a PCIe device in the chain which is not a bridge. Can you please post the output of 'lspci -vvv' and 'lspci -t'?Quoted 8 lines
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.I hope my lspci output will help!
Cheers,
Quoted 6 lines
Hi guys,
was there any progress about this?
Right now I am using linux-3.10.22 and the WARNING is still present. The system seems to be working fine, but I don't know if this issue can trigger side effects or not.
Alex and I prototyped some IOMMU and PCI restructuring [1] to avoid this case, but I haven't heard anything lately.
Bjorn
[1] http://lkml.kernel.org/r/20130711210326.1701.56478.stgit-xdHQ/5r00wBBDLzU/[email protected]
Quoted 57 lines · Bjorn Helgaas
[+cc Alex]
Quoted 46 lines · Antonio Quartulli
Quoted 36 lines · Antonio Quartulli
Quoted 30 lines · Joerg Roedel
Hi Antonio,
Quoted 18 lines · Bjorn Helgaas
Quoted 17 lines · Antonio Quartulli
[ 1.054279] WARNING: at drivers/pci/search.c:44 pci_find_upstream_pcie_bridge+0x5e/0x70() [ 1.054385] Hardware name: Latitude E5420 [ 1.054457] Modules linked in: [ 1.054568] Pid: 1, comm: swapper/0 Not tainted 3.4.0ordex+ #3 [ 1.054643] Call Trace: [ 1.054716] [<ffffffff81033d4a>] warn_slowpath_common+0x7a/0xb0 [ 1.054793] [<ffffffff81033d95>] warn_slowpath_null+0x15/0x20 [ 1.054869] [<ffffffff8123899e>] pci_find_upstream_pcie_bridge+0x5e/0x70 [ 1.054949] [<ffffffff813babe7>] intel_iommu_device_group+0x77/0x100 [ 1.055027] [<ffffffff813b52d5>] add_iommu_group+0x35/0x60 [ 1.055113] [<ffffffff813b52a0>] ? bus_set_iommu+0x50/0x50 [ 1.055191] [<ffffffff8132c586>] bus_for_each_dev+0x56/0x90 [ 1.055267] [<ffffffff813b528b>] bus_set_iommu+0x3b/0x50 [ 1.055344] [<ffffffff818c4920>] intel_iommu_init+0xab0/0xb3f [ 1.055421] [<ffffffff81120b26>] ? sys_mkdirat+0x76/0xd0 [ 1.055499] [<ffffffff8189b0db>] ? memblock_find_dma_reserve+0x13d/0x13d [ 1.055578] [<ffffffff8189b0ee>] pci_iommu_init+0x13/0x3eQuoted 8 lines
Quoted 8 lines
[ 1.055655] [<ffffffff810001ca>] do_one_initcall+0x3a/0x170 [ 1.055732] [<ffffffff81897c35>] kernel_init+0x148/0x1cc [ 1.055807] [<ffffffff81897588>] ? do_early_param+0x86/0x86 [ 1.055884] [<ffffffff814fc914>] kernel_thread_helper+0x4/0x10 [ 1.055963] [<ffffffff8105de60>] ? finish_task_switch+0x80/0x110 [ 1.056040] [<ffffffff814fafdd>] ? retint_restore_args+0xe/0xe [ 1.056126] [<ffffffff81897aed>] ? start_kernel+0x30b/0x30b [ 1.056203] [<ffffffff814fc910>] ? gs_change+0xb/0xbQuoted 4 lines
Hmm, this looks like
pci_find_upstream_pcie_bridge()found a PCIe device in the chain which is not a bridge. Can you please post the output of 'lspci -vvv' and 'lspci -t'?Quoted 8 lines
attached!
Some days ago I tried to put some printk in the code and, as far as I can understand, you are right.I hope my lspci output will help!
Cheers,
Quoted 6 lines
Hi guys,
was there any progress about this?
Right now I am using linux-3.10.22 and the WARNING is still present. The system seems to be working fine, but I don't know if this issue can trigger side effects or not.
Quoted 6 lines
Alex and I prototyped some IOMMU and PCI restructuring [1] to avoid this case, but I haven't heard anything lately.
Bjorn
[1] http://lkml.kernel.org/r/20130711210326.1701.56478.stgit-xdHQ/5r00wBBDLzU/[email protected]
Yep, it's stalled waiting on time to work on it. IIRC, the remaining work is to figure out how to generalize the behavior of root complex PCI bridges. The behavior in the patch should probably be handled as an Intel specific quirk. If anyone has time to continue it, feel free to run with the patches. Otherwise I'll get back to it eventually. Thanks,
Alex