Skip to contentSkip to conversation

ramspeed: new package

PATCH Superseded Gustavo Zacarias 2 participants 3 messages May 29, 2012

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Gustavo Zacarias

author
#0 lore raw

PATCH 1/1 ramspeed: new package

Signed-off-by Gustavo Zacarias <[email protected]>
---
 package/Config.in            |    1 +
 package/ramspeed/Config.in   |    7 +++++++
 package/ramspeed/Makefile    |   14 ++++++++++++++
 package/ramspeed/ramspeed.mk |   28 ++++++++++++++++++++++++++++
 4 files changed, 50 insertions(+), 0 deletions(-)
 create mode 100644 package/ramspeed/Config.in
 create mode 100644 package/ramspeed/Makefile
 create mode 100644 package/ramspeed/ramspeed.mk
package/Config.in +1 -0
index a3c92ec..4ddb865 100644
@@ -35,6 +35,7 @@ source "package/ltrace/Config.in"
 source "package/memstat/Config.in"
 source "package/netperf/Config.in"
 source "package/oprofile/Config.in"
+source "package/ramspeed/Config.in"
 source "package/rt-tests/Config.in"
 source "package/strace/Config.in"
 source "package/stress/Config.in"
package/ramspeed/Config.in new file +7 -0
new file mode 100644
index 0000000..b236329
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_RAMSPEED
+	bool "ramspeed"
+	help
+	  RAMspeed is a free open source command line utility
+	  to measure cache and memory performance.
+
+	  http://alasir.com/software/ramspeed/
package/ramspeed/Makefile new file +14 -0
new file mode 100644
index 0000000..acb8cfd
@@ -0,0 +1,14 @@
+
+all: generic
+
+generic: ramspeed.c fltmem.c fltmark.c intmem.c intmark.c
+	$(CC) $(CFLAGS) $^ -o ramspeed
+
+i386: ramspeed.c i386/*.s i386/cpuinfo/*.s
+	$(CC) $(CFLAGS) -DI386_ASM $^ -o ramspeed
+
+x86_64: ramspeed.c amd64/*.s
+	$(CC) $(CFLAGS) -DAMD64_ASM $^ -o ramspeed
+
+clean:
+	rm -f *.o ramspeed
package/ramspeed/ramspeed.mk new file +28 -0
new file mode 100644
index 0000000..ef48e30
@@ -0,0 +1,28 @@
+#############################################################
+#
+# ramspeed
+#
+#############################################################
+
+RAMSPEED_VERSION = 2.6.0
+RAMSPEED_SITE = http://www.alasir.com/software/ramspeed
+
+ifeq ($(BR2_i386),y)
+RAMSPEED_ARCH = i386
+else
+ifeq ($(BR2_x864_64),y)
+RAMSPEED_ARCH = x86_64
+endif
+endif
+
+define RAMSPEED_BUILD_CMDS
+	cp -f package/ramspeed/Makefile $(@D); \
+	CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
+		make -C $(@D) $(RAMSPEED_ARCH)
+endef
+
+define RAMSPEED_INSTALL_TARGET_CMDS
+	$(INSTALL) -m 0755 -D $(@D)/ramspeed $(TARGET_DIR)/usr/bin/ramspeed
+endef
+
+$(eval $(call GENTARGETS))
Signature · 1 line
1.7.3.4
#1 lore raw

PATCH 1/1 ramspeed: new package

Le Tue, 29 May 2012 17:48:38 -0300,
Gustavo Zacarias <[email protected]> a ?crit :

package/ramspeed/ramspeed.mk line 22

Quoted 5 lines
package/ramspeed/ramspeed.mk new file +5 -0
+define RAMSPEED_BUILD_CMDS
+	cp -f package/ramspeed/Makefile $(@D); \
+	CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
+		make -C $(@D) $(RAMSPEED_ARCH)
+endef

Nitpicking: those two commands do not necessarily need to belong to the shell same command. I.e, you can write it as:

+define RAMSPEED_BUILD_CMDS
+ cp -f package/ramspeed/Makefile $(@D)
+ CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
+ make -C $(@D) $(RAMSPEED_ARCH)
+endef

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
author
#2 lore raw

PATCH 1/1 ramspeed: new package

Quoted 11 lines · Thomas Petazzoni

Nitpicking: those two commands do not necessarily need to belong to the
shell same command. I.e, you can write it as:

package/ramspeed/ramspeed.mk new file +5 -0
+define RAMSPEED_BUILD_CMDS
+	cp -f package/ramspeed/Makefile $(@D)
+	CC="$(TARGET_CC)" CFLAGS="$(TARGET_CFLAGS)" \
+		make -C $(@D) $(RAMSPEED_ARCH)
+endef

Thomas

Force of habit!
Sent a V2 with a few additional minor adjustments too. Regards.