first drm-intel-next for 3.6
Hooray for yet again screwing up the recipient list!
/me sucks
-Daniel
----- Forwarded message from Daniel Vetter <[email protected]> -----
Date: Tue, 12 Jun 2012 10:37:51 +0200
From: Daniel Vetter <[email protected]>
To: Intel Graphics Development <[email protected]>, "Sun, Yi" <[email protected]>
Subject: Re: Updated -next
Message-ID: <[email protected]>
Hi Dave,
rc2 is out the door so I've figured I'll annoy you with the first -next pull request for 3.6 already. Highlights:
- new wait_rendring_timeout interface (Ben)
- l3 cache remapping and error uevent support (Ben)
- even more infoframes work from Paulo
- gen4 hotplug rework from Chris
- prep work to make Laurent Pincharts original mode constification for connector->mode_fixup possible
QA reported a few new bugs this time around, but no regressions afact. For 3.5 the only thing I'm aware of is the edp vdd dmesg spam Linus originally reported - it looks like that might have been introduced in 3.5. But somehow my brain is routinely offline when I work on that issue, so things seem to take forever (and atm I'm at patch v4 for that little problem).
Yours, Daniel
The following changes since commit 63bc620b45af8c743ac291c8725933278c712692:
radeon: add radeon prime vmap support. (2012-05-31 14:14:01 +0100)
are available in the git repository at:
git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-next-2012-06-04
for you to fetch changes up to 1523c310b3ed964b71a8db16f70c3bc21cc0642e:
drm/i915: add min freq control to debugfs (2012-06-04 21:34:47 +0200)
----------------------------------------------------------------
Ben Widawsky (8):
drm/i915: timeout parameter for seqno wait drm/i915: improve i915_wait_request_begin trace drm/i915: wait render timeout ioctl drm/i915: s/i915_wait_request/i915_wait_seqno/g drm/i915: Dynamic Parity Detection handling drm/i915: enable parity error interrupts drm/i915: remap l3 on hw init
drm/i915: l3 parity sysfs interface
Chris Wilson (6):
drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4 drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x drm/i915/hdmi: Query the live connector status bit for G4x drm/i915/dp: For consistency use the DP hotplug synonyms drm/i915/hdmi: Fix reg values for g4x_hdmi_connected
Daniel Vetter (14):
drm/i915: clarify preferred sdvo input mode code
drm/i915: don't silently ignore sdvo mode_set failures
drm/i915: there's no cxsr on ilk
drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set drm/i915: s/mdelay/msleep/ in the sdvo detect function
drm/i915: ivybridge_handle_parity_error should be static
drm/i915: initialize the parity work only once
drm/i915: simplify sysfs setup code
Merge remote-tracking branch 'airlied/drm-prime-vmap' into drm-intel-next-queued drm/i915: clarify IBX dp workaround
drm/i915: extract object active state flushing code
drm/i915: compute the target_clock for edp directly
drm/i915: adjusted_mode->clock in the dp mode_fixup
drm/i915: don't chnage the original mode in dp_mode_fixup
Jesse Barnes (1):
drm/i915: add min freq control to debugfs
Paulo Zanoni (11):
drm/i915: add set_infoframes to struct intel_hdmi drm/i915: properly alternate between DVI and HDMI drm/i915: only set the HDMI port on the DIP once drm/i915: enable DIP before enabling each InfoFrame drm/i915: don't wait for vblank while writing InfoFrames drm/i915: explicitly disable the DIPs we're not using drm/i915: disable DIP while changing the port drm/i915: don't write 0 to DIP control at HDMI init drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI drm/i915: remove comment about HSW HDMI DIPs drm/i915: add some barriers when changing DIPs
drivers/gpu/drm/i915/i915_debugfs.c | 66 +++++++ drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 11 +- drivers/gpu/drm/i915/i915_gem.c | 242 +++++++++++++++++++---- drivers/gpu/drm/i915/i915_irq.c | 171 ++++++++++++----- drivers/gpu/drm/i915/i915_reg.h | 56 +++++- drivers/gpu/drm/i915/i915_sysfs.c | 127 +++++++++++- drivers/gpu/drm/i915/i915_trace.h | 28 ++- drivers/gpu/drm/i915/intel_ddi.c | 3 +- drivers/gpu/drm/i915/intel_display.c | 47 ++--- drivers/gpu/drm/i915/intel_dp.c | 53 +++--- drivers/gpu/drm/i915/intel_drv.h | 9 +- drivers/gpu/drm/i915/intel_hdmi.c | 318 +++++++++++++++++++++++++------ drivers/gpu/drm/i915/intel_overlay.c | 4 +- drivers/gpu/drm/i915/intel_panel.c | 2 +- drivers/gpu/drm/i915/intel_ringbuffer.c | 16 +- drivers/gpu/drm/i915/intel_sdvo.c | 56 ++++-- include/drm/i915_drm.h | 10 + 18 files changed, 965 insertions(+), 255 deletions(-)
Signature · 10 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48 ----- End forwarded message ----- -- Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48
Hi Dave,
Resend of the pull as request on irc, all the fancy details are below the cut. Mail is completely unchanged, so it's still babbling about rc2 and regression that are tracked down by now ;-)
Cheers, Daniel
---
Hi Dave,
rc2 is out the door so I've figured I'll annoy you with the first -next pull request for 3.6 already. Highlights:
- new wait_rendring_timeout interface (Ben)
- l3 cache remapping and error uevent support (Ben)
- even more infoframes work from Paulo
- gen4 hotplug rework from Chris
- prep work to make Laurent Pincharts original mode constification for connector->mode_fixup possible
QA reported a few new bugs this time around, but no regressions afact. For 3.5 the only thing I'm aware of is the edp vdd dmesg spam Linus originally reported - it looks like that might have been introduced in 3.5. But somehow my brain is routinely offline when I work on that issue, so things seem to take forever (and atm I'm at patch v4 for that little problem).
Yours, Daniel
The following changes since commit 63bc620b45af8c743ac291c8725933278c712692:
radeon: add radeon prime vmap support. (2012-05-31 14:14:01 +0100)
are available in the git repository at:
git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-next-2012-06-04
for you to fetch changes up to 1523c310b3ed964b71a8db16f70c3bc21cc0642e:
drm/i915: add min freq control to debugfs (2012-06-04 21:34:47 +0200)
----------------------------------------------------------------
Ben Widawsky (8):
drm/i915: timeout parameter for seqno wait drm/i915: improve i915_wait_request_begin trace drm/i915: wait render timeout ioctl drm/i915: s/i915_wait_request/i915_wait_seqno/g drm/i915: Dynamic Parity Detection handling drm/i915: enable parity error interrupts drm/i915: remap l3 on hw init
drm/i915: l3 parity sysfs interface
Chris Wilson (6):
drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4 drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x drm/i915/hdmi: Query the live connector status bit for G4x drm/i915/dp: For consistency use the DP hotplug synonyms drm/i915/hdmi: Fix reg values for g4x_hdmi_connected
Daniel Vetter (14):
drm/i915: clarify preferred sdvo input mode code
drm/i915: don't silently ignore sdvo mode_set failures
drm/i915: there's no cxsr on ilk
drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set drm/i915: s/mdelay/msleep/ in the sdvo detect function
drm/i915: ivybridge_handle_parity_error should be static
drm/i915: initialize the parity work only once
drm/i915: simplify sysfs setup code
Merge remote-tracking branch 'airlied/drm-prime-vmap' into drm-intel-next-queued drm/i915: clarify IBX dp workaround
drm/i915: extract object active state flushing code
drm/i915: compute the target_clock for edp directly
drm/i915: adjusted_mode->clock in the dp mode_fixup
drm/i915: don't chnage the original mode in dp_mode_fixup
Jesse Barnes (1):
drm/i915: add min freq control to debugfs
Paulo Zanoni (11):
drm/i915: add set_infoframes to struct intel_hdmi drm/i915: properly alternate between DVI and HDMI drm/i915: only set the HDMI port on the DIP once drm/i915: enable DIP before enabling each InfoFrame drm/i915: don't wait for vblank while writing InfoFrames drm/i915: explicitly disable the DIPs we're not using drm/i915: disable DIP while changing the port drm/i915: don't write 0 to DIP control at HDMI init drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI drm/i915: remove comment about HSW HDMI DIPs drm/i915: add some barriers when changing DIPs
drivers/gpu/drm/i915/i915_debugfs.c | 66 +++++++ drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 11 +- drivers/gpu/drm/i915/i915_gem.c | 242 +++++++++++++++++++---- drivers/gpu/drm/i915/i915_irq.c | 171 ++++++++++++----- drivers/gpu/drm/i915/i915_reg.h | 56 +++++- drivers/gpu/drm/i915/i915_sysfs.c | 127 +++++++++++- drivers/gpu/drm/i915/i915_trace.h | 28 ++- drivers/gpu/drm/i915/intel_ddi.c | 3 +- drivers/gpu/drm/i915/intel_display.c | 47 ++--- drivers/gpu/drm/i915/intel_dp.c | 53 +++--- drivers/gpu/drm/i915/intel_drv.h | 9 +- drivers/gpu/drm/i915/intel_hdmi.c | 318 +++++++++++++++++++++++++------ drivers/gpu/drm/i915/intel_overlay.c | 4 +- drivers/gpu/drm/i915/intel_panel.c | 2 +- drivers/gpu/drm/i915/intel_ringbuffer.c | 16 +- drivers/gpu/drm/i915/intel_sdvo.c | 56 ++++-- include/drm/i915_drm.h | 10 + 18 files changed, 965 insertions(+), 255 deletions(-)
Signature · 3 lines
Daniel Vetter Mail: [email protected] Mobile: +41 (0)79 365 57 48