staging: comedi: ni_daq_700: remove the CALLBACK_* code
PATCH 18/31 staging: comedi: ni_daq_700: remove the CALLBACK_* code
This driver was originally copied from the 8255 driver. The 8255 uses a callback function to handle the io operations to the device. In this driver, the callback adds unneeded complexity.
The CALLBACK_ARG for this driver is always 'dev->iobase' and the CALLBACK_FUNC is always 'subdev_700_cb'.
The callback function is also overly complex for this driver. It takes a 'dir' parameter to determine if the io is a write or read, a 'port' parameter that is not used, a 'data' parameter that is only used for writes, and an 'arg' which is the iobase of the device.
Unwind all of it and just put the outb()/inb() call in the code where needed.
This allows getting rid of the private data completely. Refactor the code based on it's removal.
--- drivers/staging/comedi/drivers/ni_daq_700.c | 46 ++--------------------------- 1 file changed, 2 insertions(+), 44 deletions(-)
drivers/staging/comedi/drivers/ni_daq_700.c +2 -44
@@ -66,28 +66,6 @@ struct dio700_board {#define DIO_W 0x04#define DIO_R 0x05 -struct subdev_700_struct { -unsigned long cb_arg; -int (*cb_func) (int ,int ,int ,unsigned long ); -}; - -#define CALLBACK_ARG (((struct subdev_700_struct *)s->private)->cb_arg) -#define CALLBACK_FUNC (((struct subdev_700_struct *)s->private)->cb_func) -#define subdevpriv ((struct subdev_700_struct *)s->private) - -static int subdev_700_cb (int dir,int port,int data,unsigned long arg) -{ -/* port is always A for output and B for input (8255 emu) */ -unsigned long iobase = arg; - -if (dir) { -outb (data, iobase +DIO_W ); -return 0 ; - }else { -return inb (iobase +DIO_R ); - } -} -static int subdev_700_insn (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)
@@ -97,12 +75,11 @@ static int subdev_700_insn(struct comedi_device *dev, s->state |= (data[0 ] & data[1 ]);if (data[0 ] &0xff ) -CALLBACK_FUNC (1 , _700_DATA, s->state &0xff , -CALLBACK_ARG ); +outb (s->state &0xff , dev->iobase +DIO_W ); } data[1 ] = s->state &0xff ; - data[1 ] |=CALLBACK_FUNC (0 , _700_DATA,0 ,CALLBACK_ARG ) <<8 ; + data[1 ] |=inb (dev->iobase +DIO_R );return insn->n; }
@@ -142,16 +119,6 @@ static int subdev_700_init(struct comedi_device *dev, s->range_table = &range_digital; s->maxdata =1 ; - s->private =kmalloc (sizeof (struct subdev_700_struct ),GFP_KERNEL ); -if (!s->private) -return -ENOMEM ; - -CALLBACK_ARG = arg; -if (cb ==NULL ) -CALLBACK_FUNC = subdev_700_cb; -else -CALLBACK_FUNC = cb; - s->insn_bits = subdev_700_insn; s->insn_config = subdev_700_insn_config;
@@ -161,13 +128,6 @@ static int subdev_700_init(struct comedi_device *dev,return 0 ; } -static void subdev_700_cleanup (struct comedi_device *dev, -struct comedi_subdevice *s) -{ -if (s->private) -kfree (s->private); -} -static int dio700_attach (struct comedi_device *dev,struct comedi_devconfig *it) {const struct dio700_board *thisboard =comedi_board (dev);
@@ -224,8 +184,6 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)static void dio700_detach (struct comedi_device *dev) { -if (dev->subdevices) -subdev_700_cleanup (dev, dev->subdevices +0 );if (dev->irq)free_irq (dev->irq, dev); };
Signature · 1 line
1.7.11