boot hang on commit "PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup."
Hi Deepthi,
It seems that commit de08622 triggers a boot hang in my kvm boot test.
kvm -cpu kvm64 -enable-kvm \
-kernel ./gpxelinux.lkrn \
-initrd ./kvm.gpxe \
-m 384M \
-net nic,vlan=0,macaddr=00:00:00:00:00:00,model=e1000 \
-net user,vlan=0,hostfwd=tcp::$port-:22 \
-boot order=nc \
-no-reboot \
-watchdog i6300esb \
$(qemu_drives) \
-pidfile $pidfile \
-serial file:$dmesg tree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: de08622731417ba429fc470ab8f2d7c260cb5c72 commit: de08622731417ba429fc470ab8f2d7c260cb5c72 [9/9] PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. config: x86_64-allyesdebian (attached as .config)
x86_64-allyesdebian bbbbbbbbbB
--
8: b 0eb8c06 2012-06-19 22:23:37 +0200 PM / Sleep: Separate printing suspend times from initcall_debug
9: B de08622 boot hang after [ 81.370898] usbcore: registered new interface driver dw2102
legend: [b] boot fine [B] boot error
commit de08622731417ba429fc470ab8f2d7c260cb5c72
Author: Deepthi Dharwar <[email protected]> Date: Wed Jun 13 16:28:17 2012 +0530
PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164
This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584 (ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) by removing acpi_idle_suspend flag.
- https://lkml.org/lkml/2011/11/14/74
But this fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commit e978aa7d broke suspend and with commit 3439a8da resume was not working with acpi_idle driver.
This patch fixes the regression that caused this issue in the first place. acpi_idle_suspend flag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commit b04e7bdb984 )
So reverting the commit 3439a8da is essential.
By default, irqs are disabled in cpu_idle arch specific call and re-enabled in idle state return path . As the acpi_idle_suspend flag was being set during suspend, which prevented the cpus going to deeper idle states, it is essential to
enabling the irqs in its return path too.
To address the suspend issue,
we were not re-enabling the interrupts while returning from acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set. and this was causing suspend failure.
In addition to the above fix, a sanity check has also been added in x86 arch specific cpu_idle call to ensure that the idle call always returns with IRQs enabled.
arch/x86/kernel/process.c +6 -0
@@ -460,6 +460,12 @@ void cpu_idle(void)pm_idle ();rcu_idle_exit (); + +/* +* Sanity check to ensure that idle call returns +* with IRQs enabled +*/ +WARN_ON (irqs_disabled ());start_critical_timings ();/* In many cases the interrupt that ended idle
drivers/acpi/processor_idle.c +28 -0
@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )
@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }
@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);
@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/*
@@ -901,6 +922,13 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,if (unlikely (!pr))return -EINVAL ; +if (acpi_idle_suspend) { +if (irqs_disabled ()) +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (!cx->bm_sts_skip &&acpi_idle_bm_check ()) {if (drv->safe_state_index >=0 ) { return drv->states[drv->safe_state_index].enter(dev,
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-rc2+ (wfg@bee) (gcc version 4.7.0 (Debian 4.7.1-1) ) #12 SMP Wed Jun 20 14:11:33 CST 2012 [ 0.000000] Command line: rcutorture.rcutorture_runnable=0 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal ip=::::kvm::dhcp nfsroot=10.239.97.14:/nfsroot/wfg,tcp,v3,nocto,actimeo=600,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=./kernel-tests/kernels/x86_64-allyesdebian/de08622731417ba429fc470ab8f2d7c260cb5c72/vmlinuz-3.5.0-rc2+ [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000017ffcfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000017ffd000-0x0000000017ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffbc000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x17ffd max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f8860-0x000f886f] mapped at [ffff8800000f8860] [ 0.000000] mpc: f8870-f898c [ 0.000000] iBFT found at 0x9c730. [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x17ffcfff] [ 0.000000] [mem 0x00000000-0x17ffcfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x17ffcfff @ [mem 0x17f3b000-0x17ffcfff] [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127960(97%) [ 0.000000] ACPI: RSDP 00000000000f8810 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000017ffde10 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000017fffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000017ffdfd0 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123) [ 0.000000] ACPI: FACS 0000000017fffe00 00040 [ 0.000000] ACPI: SSDT 0000000017ffdf80 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000017ffde90 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000017ffde50 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000017ffcfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17ffcfff] [ 0.000000] NODE_DATA [mem 0x17736000-0x1773afff] [ 0.000000] kvm-clock: Using msrs 12 and 11 [ 0.000000] kvm-clock: cpu 0, msr 0:3f9c981, boot clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880016800000-ffff880016dfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x17ffcfff] [ 0.000000] On node 0 totalpages: 98188 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 8 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1472 pages used for memmap [ 0.000000] DMA32 zone: 92733 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x18000000-0xfffbbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 477 pages/cpu @ffff880017200000 s1923928 r8192 d21672 u2097152 [ 0.000000] pcpu-alloc: s1923928 r8192 d21672 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:173d4981, primary cpu clock [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 96644 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: rcutorture.rcutorture_runnable=0 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal ip=::::kvm::dhcp nfsroot=10.239.97.14:/nfsroot/wfg,tcp,v3,nocto,actimeo=600,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=./kernel-tests/kernels/x86_64-allyesdebian/de08622731417ba429fc470ab8f2d7c260cb5c72/vmlinuz-3.5.0-rc2+ [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 309372k/393204k available (27800k kernel code, 452k absent, 83380k reserved, 19072k data, 3776k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 218 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] allocated 1572864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Detected 3300.112 MHz processor. [ 0.004000] Calibrating delay loop (skipped) preset value.. 6600.22 BogoMIPS (lpj=13200448) [ 0.004025] pid_max: default: 32768 minimum: 301 [ 0.006208] Security Framework initialized [ 0.008016] AppArmor: AppArmor disabled by boot time parameter [ 0.010298] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.012861] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.016423] Mount-cache hash table entries: 256 [ 0.022209] Initializing cgroup subsys cpuacct [ 0.023726] Initializing cgroup subsys memory [ 0.024319] Initializing cgroup subsys devices [ 0.025785] Initializing cgroup subsys freezer [ 0.028013] Initializing cgroup subsys net_cls [ 0.029509] Initializing cgroup subsys blkio [ 0.032320] Disabled fast string operations [ 0.033759] mce: CPU supports 10 MCE banks [ 0.035223] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.038301] ACPI: Core revision 20120320 [ 0.044526] ftrace: allocating 106334 entries in 416 pages [ 0.072406] Getting VERSION: 50014 [ 0.073284] Getting VERSION: 50014 [ 0.076024] Getting ID: 0 [ 0.076834] Getting ID: ff000000 [ 0.077979] Getting LVT0: 8700 [ 0.078890] Getting LVT1: 8400 [ 0.080083] enabled ExtINT on CPU#0 [ 0.082303] ENABLING IO-APIC IRQs [ 0.084017] init IO_APIC IRQs [ 0.084960] apic 2 pin 0 not connected [ 0.086030] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.088042] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.090196] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.092037] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.096027] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.098057] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.100073] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.102181] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.104043] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.106376] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.108005] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.108051] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.110710] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.112029] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.114211] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.116032] apic 2 pin 16 not connected [ 0.117204] apic 2 pin 17 not connected [ 0.118377] apic 2 pin 18 not connected [ 0.120011] apic 2 pin 19 not connected [ 0.121112] apic 2 pin 20 not connected [ 0.122245] apic 2 pin 21 not connected [ 0.124012] apic 2 pin 22 not connected [ 0.125037] apic 2 pin 23 not connected [ 0.126180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128017] CPU0: Intel Common KVM processor stepping 01 [ 0.130051] Using local APIC timer interrupts. [ 0.130051] calibrating APIC timer ... [ 0.136007] ... lapic delta = 6248866 [ 0.136007] ... PM-Timer delta = 357918 [ 0.136007] ... PM-Timer result ok [ 0.136007] ..... delta 6248866 [ 0.136007] ..... mult: 268369977 [ 0.136007] ..... calibration result: 3999274 [ 0.136007] ..... CPU clock speed is 3299.3540 MHz. [ 0.136007] ..... host bus clock speed is 999.3274 MHz. [ 0.136078] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.140295] Testing tracer nop: PASSED [ 0.141824] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.146054] lockdep: fixing up alternatives. [ 0.147571] Booting Node 0, Processors #1 Ok. [ 0.004000] kvm-clock: cpu 1, msr 0:175d4981, secondary cpu clock [ 0.004000] masked ExtINT on CPU#1 [ 0.004000] Disabled fast string operations [ 0.004000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.168009] TSC synchronization [CPU#0 -> CPU#1]: [ 0.168009] Measured 8016 cycles TSC warp between CPUs, turning off TSC clock. [ 0.168009] Marking TSC unstable due to check_tsc_sync_source failed [ 0.172087] NMI watchdog: disabled (cpu1): hardware events not enabled [ 0.173621] Brought up 2 CPUs [ 0.176020] ---------------- [ 0.176906] | NMI testsuite: [ 0.177696] -------------------- [ 0.178624] remote IPI: ok | [ 0.178624] local IPI: ok | [ 0.196021] -------------------- [ 0.197106] Good, all 2 testcases passed! | [ 0.198390] --------------------------------- [ 0.199657] Total of 2 processors activated (13200.44 BogoMIPS). [ 0.200649] CPU0 attaching sched-domain: [ 0.201796] domain 0: span 0-1 level CPU [ 0.204047] groups: 0 (cpu_power = 1023) 1 [ 0.205195] CPU1 attaching sched-domain: [ 0.206277] domain 0: span 0-1 level CPU [ 0.207362] groups: 1 0 (cpu_power = 1023) [ 0.209087] devtmpfs: initialized [ 0.227325] xor: automatically using best checksumming function: [ 0.268043] generic_sse: 172.000 MB/sec [ 0.269453] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.272409] dummy: [ 0.274401] NET: Registered protocol family 16 [ 0.282632] ACPI: bus type pci registered [ 0.283872] dca service started, version 1.12.1 [ 0.284214] PCI: Using configuration type 1 for base access [ 0.290735] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.292021] mtrr: your CPUs had inconsistent MTRRdefType settings [ 0.293544] mtrr: probably your BIOS does not setup all CPUs. [ 0.294990] mtrr: corrected configuration. [ 0.444850] bio: create slab <bio-0> at 0 [ 0.512041] raid6: sse2x1 5754 MB/s [ 0.580041] raid6: sse2x2 7636 MB/s [ 0.648049] raid6: sse2x4 8697 MB/s [ 0.649234] raid6: using algorithm sse2x4 (8697 MB/s) [ 0.650600] raid6: using intx1 recovery algorithm [ 0.652187] ACPI: Added _OSI(Module Device) [ 0.653623] ACPI: Added _OSI(Processor Device) [ 0.655003] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656048] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660223] ACPI: EC: Look up EC in DSDT [ 0.668988] ACPI: Interpreter enabled [ 0.670048] ACPI: (supports S0 S3 S4 S5) [ 0.671032] ACPI: Using IOAPIC for interrupt routing [ 0.687700] ACPI: No dock devices found. [ 0.688049] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.690462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.692127] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.694029] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.696051] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.698347] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.700062] PCI: root bus 00: using default resources [ 0.701576] PCI host bridge to bus 0000:00 [ 0.704050] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.705798] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.708122] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.710147] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.712470] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.714292] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f] [ 0.716141] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.718419] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.720061] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.722165] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.729015] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref] [ 0.736170] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff] [ 0.760152] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref] [ 0.762534] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.765268] pci 0000:00:03.0: reg 10: [mem 0xf2020000-0xf203ffff] [ 0.772060] pci 0000:00:03.0: reg 14: [io 0xc040-0xc07f] [ 0.783633] pci 0000:00:03.0: reg 30: [mem 0xf2040000-0xf2047fff pref] [ 0.784365] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.788185] pci 0000:00:04.0: reg 10: [io 0xc080-0xc0bf] [ 0.789823] pci 0000:00:04.0: reg 14: [mem 0xf2048000-0xf2048fff] [ 0.793043] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.795146] pci 0000:00:05.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.796163] pci 0000:00:05.0: reg 14: [mem 0xf2049000-0xf2049fff] [ 0.799035] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.800266] pci 0000:00:06.0: reg 10: [io 0xc100-0xc13f] [ 0.804157] pci 0000:00:06.0: reg 14: [mem 0xf204a000-0xf204afff] [ 0.807450] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.808301] pci 0000:00:07.0: reg 10: [io 0xc140-0xc17f] [ 0.810219] pci 0000:00:07.0: reg 14: [mem 0xf204b000-0xf204bfff] [ 0.813126] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.816290] pci 0000:00:08.0: reg 10: [io 0xc180-0xc1bf] [ 0.818077] pci 0000:00:08.0: reg 14: [mem 0xf204c000-0xf204cfff] [ 0.821178] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.823190] pci 0000:00:09.0: reg 10: [io 0xc1c0-0xc1ff] [ 0.824172] pci 0000:00:09.0: reg 14: [mem 0xf204d000-0xf204dfff] [ 0.828735] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.830563] pci 0000:00:0a.0: reg 10: [mem 0xf204e000-0xf204e00f] [ 0.833257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.838994] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.875385] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.876386] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.878475] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.880361] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.885137] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.888086] vgaarb: loaded [ 0.888966] vgaarb: bridge control possible 0000:00:02.0 [ 0.892162] tps65010: version 2 May 2005 [ 0.924147] tps65010: no chip? [ 0.927048] SCSI subsystem initialized [ 0.928289] libata version 3.00 loaded. [ 0.929737] ACPI: bus type usb registered [ 0.931340] usbcore: registered new interface driver usbfs [ 0.932191] usbcore: registered new interface driver hub [ 0.936224] usbcore: registered new device driver usb [ 0.938153] Linux video capture interface: v2.00 [ 0.940210] pps_core: LinuxPPS API ver. 1 registered [ 0.941845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.944702] wmi: Mapper loaded [ 0.946303] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.948150] PCI: Using ACPI for IRQ routing [ 0.949545] PCI: pci_cache_line_size set to 64 bytes [ 0.952592] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.954465] e820: reserve RAM buffer [mem 0x17ffd000-0x17ffffff] [ 0.957472] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 0.960317] NET: Registered protocol family 23 [ 0.962034] Bluetooth: Core ver 2.16 [ 0.964138] NET: Registered protocol family 31 [ 0.965648] Bluetooth: HCI device and connection manager initialized [ 0.967568] Bluetooth: HCI socket layer initialized [ 0.968073] Bluetooth: L2CAP socket layer initialized [ 0.969801] Bluetooth: SCO socket layer initialized [ 0.972079] NET: Registered protocol family 8 [ 0.973532] NET: Registered protocol family 20 [ 0.976985] cfg80211: Calling CRDA to update world regulatory domain [ 0.984627] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.986378] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.987864] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.996290] Switching to clocksource kvm-clock [ 1.476269] FS-Cache: Loaded [ 1.477799] CacheFiles: Loaded [ 1.479102] pnp: PnP ACPI init [ 1.480395] ACPI: bus type pnp registered [ 1.482164] pnp 00:00: [bus 00-ff] [ 1.494452] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.495704] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.497267] pnp 00:00: [io 0x0d00-0xffff window] [ 1.498647] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.500398] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 1.502547] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.504954] pnp 00:01: [io 0x0070-0x0071] [ 1.506571] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.509292] pnp 00:01: [irq 8] [ 1.510524] pnp 00:01: [io 0x0072-0x0077] [ 1.512155] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.514469] pnp 00:02: [io 0x0060] [ 1.515786] pnp 00:02: [io 0x0064] [ 1.517208] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.519894] pnp 00:02: [irq 1] [ 1.521303] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.523446] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.525983] pnp 00:03: [irq 12] [ 1.527227] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.528989] pnp 00:04: [io 0x03f2-0x03f5] [ 1.530189] pnp 00:04: [io 0x03f7] [ 1.531189] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.533323] pnp 00:04: [irq 6] [ 1.534235] pnp 00:04: [dma 2] [ 1.535334] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.537170] pnp 00:05: [io 0x0378-0x037f] [ 1.538323] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.540398] pnp 00:05: [irq 7] [ 1.541515] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.543211] pnp 00:06: [io 0x03f8-0x03ff] [ 1.544349] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.546479] pnp 00:06: [irq 4] [ 1.547493] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.549333] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 1.550798] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.552799] pnp: PnP ACPI: found 8 devices [ 1.554001] ACPI: ACPI bus type pnp unregistered [ 1.583994] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 1.585428] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 1.587795] NET: Registered protocol family 2 [ 1.589550] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 1.593005] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 1.596043] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes) [ 1.600266] TCP: Hash tables configured (established 16384 bind 16384) [ 1.602045] TCP: reno registered [ 1.603048] UDP hash table entries: 256 (order: 3, 49152 bytes) [ 1.604711] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) [ 1.607312] NET: Registered protocol family 1 [ 1.610148] RPC: Registered named UNIX socket transport module. [ 1.611705] RPC: Registered udp transport module. [ 1.613017] RPC: Registered tcp transport module. [ 1.614474] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.616266] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.618179] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.620067] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.622143] pci 0000:00:02.0: Boot video device [ 1.623869] PCI: CLS 0 bytes, default 64 [ 1.669392] DMA-API: preallocated 32768 debug entries [ 1.670697] DMA-API: debugging enabled by kernel config [ 1.675141] kvm: no hardware support [ 1.676307] has_svm: not amd [ 1.677250] kvm: no hardware support [ 1.679647] Machine check injector initialized [ 1.682796] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 1.684348] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 1.686128] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 1.689088] cryptomgr_test (29) used greatest stack depth: 6008 bytes left [ 1.691263] cryptomgr_test (30) used greatest stack depth: 5784 bytes left [ 1.696958] Initializing RT-Tester: OK [ 1.698305] audit: initializing netlink socket (disabled) [ 1.699764] type=2000 audit(1340177704.692:1): initialized [ 1.775544] Kprobe smoke test started [ 4.171815] Kprobe smoke test passed successfully [ 12.646329] Testing tracer function: PASSED [ 13.264047] Testing dynamic ftrace: PASSED [ 14.168789] Testing dynamic ftrace ops #1: (1 0 1 1 0) (1 1 2 1 0) (2 1 3 1 4) (2 2 4 1 21) PASSED [ 15.104084] Testing dynamic ftrace ops #2: (1 0 1 4 0) (1 1 2 21 0) (2 1 3 1 289) (2 2 4 27 313) PASSED [ 20.143724] Testing tracer irqsoff: PASSED [ 26.000095] Testing tracer wakeup: PASSED [ 32.171452] Testing tracer wakeup_rt: PASSED [ 44.948127] Testing tracer function_graph: PASSED [ 44.951303] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 44.955789] VFS: Disk quotas dquot_6.5.2 [ 44.957627] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 44.962104] DLM installed [ 44.966064] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 44.972792] NFS: Registering the id_resolver key type [ 44.974594] Key type id_resolver registered [ 44.976095] FS-Cache: Netfs 'nfs' registered for caching [ 44.979608] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 44.981697] Installing knfsd (copyright (C) 1996 [email protected]). [ 44.987577] FS-Cache: Netfs 'cifs' registered for caching [ 44.990477] Key type cifs.spnego registered [ 44.991874] Key type cifs.idmap registered [ 44.993346] NTFS driver 2.1.30 [Flags: R/W]. [ 44.995405] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 44.997134] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 45.001205] ROMFS MTD (C) 2007 Red Hat, Inc. [ 45.003822] QNX4 filesystem 0.2.3 registered. [ 45.005720] fuse init (API version 7.19) [ 45.008852] JFS: nTxBlock = 2416, nTxLock = 19335 [ 45.015982] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 45.029082] 9p: Installing v9fs 9p2000 file system support [ 45.030940] FS-Cache: Netfs '9p' registered for caching [ 45.032864] NILFS version 2 loaded [ 45.034034] BeFS version: 0.9.3 [ 45.035187] OCFS2 1.5.0 [ 45.036906] ocfs2: Registered cluster interface o2cb [ 45.038929] ocfs2: Registered cluster interface user [ 45.040510] OCFS2 DLMFS 1.5.0 [ 45.041927] OCFS2 User DLM kernel interface loaded [ 45.043540] OCFS2 Node Manager 1.5.0 [ 45.045663] OCFS2 DLM 1.5.0 [ 45.048550] Btrfs loaded [ 45.051294] GFS2 installed [ 45.052768] ceph: loaded (mds proto 32) [ 45.054260] msgmni has been set to 604 [ 45.063920] alg: No test for cipher_null (cipher_null-generic) [ 45.066099] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 45.068054] alg: No test for digest_null (digest_null-generic) [ 45.070154] alg: No test for compress_null (compress_null-generic) [ 45.072450] cryptomgr_test (67) used greatest stack depth: 5608 bytes left [ 45.075552] cryptomgr_test (71) used greatest stack depth: 5432 bytes left [ 45.086028] alg: No test for fcrypt (fcrypt-generic) [ 45.098527] alg: No test for stdrng (krng) [ 45.109861] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 45.111743] async_tx: api initialized (async) [ 45.113188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 45.115316] io scheduler noop registered [ 45.116464] io scheduler deadline registered [ 45.118009] io scheduler cfq registered (default) [ 45.119472] start plist test [ 45.121802] end plist test [ 45.122668] list_sort_test: start testing list_sort() [ 45.126242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 45.127908] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 45.129775] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 45.131633] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 45.133681] cpcihp_generic: not configured, disabling. [ 45.135246] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 45.136933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 45.139006] acpiphp: Slot [1] registered [ 45.140435] acpiphp: Slot [2] registered [ 45.141740] acpiphp: Slot [3] registered [ 45.142990] acpiphp: Slot [4] registered [ 45.144401] acpiphp: Slot [5] registered [ 45.145603] acpiphp: Slot [6] registered [ 45.146927] acpiphp: Slot [7] registered [ 45.148521] acpiphp: Slot [8] registered [ 45.149900] acpiphp: Slot [9] registered [ 45.151217] acpiphp: Slot [10] registered [ 45.152547] acpiphp: Slot [11] registered [ 45.153698] acpiphp: Slot [12] registered [ 45.154882] acpiphp: Slot [13] registered [ 45.156130] acpiphp: Slot [14] registered [ 45.157462] acpiphp: Slot [15] registered [ 45.158737] acpiphp: Slot [16] registered [ 45.160248] acpiphp: Slot [17] registered [ 45.161819] acpiphp: Slot [18] registered [ 45.163355] acpiphp: Slot [19] registered [ 45.164745] acpiphp: Slot [20] registered [ 45.165952] acpiphp: Slot [21] registered [ 45.167276] acpiphp: Slot [22] registered [ 45.168642] acpiphp: Slot [23] registered [ 45.170041] acpiphp: Slot [24] registered [ 45.171234] acpiphp: Slot [25] registered [ 45.172532] acpiphp: Slot [26] registered [ 45.182224] acpiphp: Slot [27] registered [ 45.183447] acpiphp: Slot [28] registered [ 45.184652] acpiphp: Slot [29] registered [ 45.185865] acpiphp: Slot [30] registered [ 45.187032] acpiphp: Slot [31] registered [ 45.191843] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 45.194266] progear_bl: ALI M7101 PMU not found. [ 45.196699] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 45.199313] vmlfb: initializing [ 45.200422] Could not find Carillo Ranch MCH device. [ 45.202052] no IO addresses supplied [ 45.203509] hgafb: HGA card not detected. [ 45.204582] hgafb: probe of hgafb.0 failed with error -22 [ 45.207608] kworker/u:0 (116) used greatest stack depth: 5272 bytes left [ 45.209649] uvesafb: failed to execute /sbin/v86d [ 45.210844] uvesafb: make sure that the v86d helper is installed and executable [ 45.212913] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 45.214882] uvesafb: vbe_init() failed with -22 [ 45.216243] uvesafb: probe of uvesafb.0 failed with error -22 [ 45.218442] vga16fb: initializing [ 45.219428] vga16fb: mapped to 0xffff8800000a0000 [ 46.396276] Console: switching to colour frame buffer device 80x30 [ 46.540165] fb0: VGA16 VGA frame buffer device [ 46.545798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 46.555413] ACPI: Power Button [PWRF] [ 46.578725] GHES: HEST is not enabled! [ 46.778311] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 47.059768] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 47.314711] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 47.816432] virtio-pci 0000:00:04.0: setting latency timer to 64 [ 48.095139] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 48.368774] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:3) [ 48.962686] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 49.304974] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 49.642860] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 49.909067] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 50.267999] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 50.574072] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 50.941577] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 51.262716] XENFS: not registering filesystem on non-xen platform [ 51.521633] HDLC line discipline maxframe=4096 [ 51.820194] N_HDLC line discipline registered. [ 52.087982] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 52.334577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 52.640875] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 53.016728] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 53.312910] Cyclades driver 2.6 [ 53.619201] MOXA Intellio family driver version 6.0k [ 53.941922] MOXA Smartio/Industio family driver version 2.0.5 [ 54.316548] Initializing Nozomi driver 2.1d [ 54.316744] RocketPort device driver module, version 2.09, 12-June-2003 [ 54.316770] No rocketport ports found; unloading driver [ 54.316815] SyncLink GT [ 54.316913] SyncLink GT, tty major#247 [ 54.317027] SyncLink GT no devices found [ 54.317028] SyncLink MultiPort driver $Revision: 4.38 $ [ 54.343080] SyncLink MultiPort driver $Revision: 4.38 $, tty major#246 [ 54.343082] SyncLink serial driver $Revision: 4.38 $ [ 54.368778] SyncLink serial driver $Revision: 4.38 $, tty major#245 [ 54.639253] lp: driver loaded but no devices found [ 54.639254] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 54.639266] ac.o: No PCI boards found. [ 54.639267] ac.o: For an ISA board you must supply memory and irq parameters. [ 54.643122] Non-volatile memory driver v1.3 [ 54.644154] ppdev: user-space parallel port driver [ 54.644200] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 54.644244] smapi::smapi_init, ERROR invalid usSmapiID [ 54.644245] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 54.644245] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 54.644248] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 54.644251] Linux agpgart interface v0.103 [ 54.646254] SyncLink PC Card driver $Revision: 4.34 $, tty major#243 [ 54.646490] ipmi message handler version 39.2 [ 54.646515] ipmi device interface [ 54.646661] IPMI System Interface driver. [ 54.646966] ipmi_si: Adding default-specified kcs state machine [ 54.646968] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 54.646997] ipmi_si: Interface detection failed [ 63.572027] [sched_delayed] sched: RT throttling activated [ 64.000577] ipmi_si: Adding default-specified smic state machine [ 64.297415] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 64.297451] ipmi_si: Interface detection failed [ 65.296340] ipmi_si: Adding default-specified bt state machine [ 65.537024] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 65.537706] ipmi_si: Interface detection failed [ 66.368787] ipmi_si: Unable to find any System Interface(s) [ 66.667774] IPMI Watchdog: driver initialized [ 66.667774] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 66.667875] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 66.667876] Hangcheck: Using getrawmonotonic(). [ 66.668721] [drm] Initialized drm 1.1.0 20060810 [ 66.669355] [drm] radeon defaulting to kernel modesetting. [ 66.669356] [drm] radeon kernel modesetting enabled. [ 66.669564] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 66.670180] parport_pc 00:05: reported by Plug and Play ACPI [ 66.671061] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 66.956338] lp0: using parport0 (interrupt-driven). [ 66.968856] FDC 0 is a S82078B [ 66.980820] brd: module loaded [ 66.988439] loop: module loaded [ 66.988440] Compaq SMART2 Driver (v 2.6.0) [ 66.988585] HP CISS Driver (v 3.6.26) [ 67.525437] MM: desc_per_page = 128 [ 67.529589] nbd: registered device at major 43 [ 67.543122] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X [ 67.543181] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X [ 67.594278] vda: unknown partition table [ 67.601794] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X [ 67.601970] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X [ 67.615266] vdb: unknown partition table [ 67.616689] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X [ 67.617033] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X [ 67.636889] vdc: unknown partition table [ 67.638051] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X [ 67.638093] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X [ 67.654725] vdd: unknown partition table [ 67.656067] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X [ 67.656507] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X [ 67.713157] vde: unknown partition table [ 67.714206] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X [ 67.714261] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X [ 67.741008] vdf: unknown partition table [ 69.547429] drbd: initialized. Version: 8.3.13 (api:88/proto:86-96) [ 69.547430] drbd: built-in [ 69.547431] drbd: registered as block device major 147 [ 69.547432] drbd: minor_table @ 0xffff88000ee49ef0 [ 69.547618] rbd: loaded rbd (rados block device) [ 69.547781] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 69.548540] lkdtm: No crash points registered, enable through debugfs [ 69.548797] Phantom Linux Driver, version n0.9.8, init OK [ 69.549369] i2c-core: driver [apds9802als] using legacy suspend method [ 69.549370] i2c-core: driver [apds9802als] using legacy resume method [ 69.549429] i2c-core: driver [isl29003] using legacy suspend method [ 69.549430] i2c-core: driver [isl29003] using legacy resume method [ 69.549561] i2c-core: driver [tsl2550] using legacy suspend method [ 69.549562] i2c-core: driver [tsl2550] using legacy resume method [ 69.549685] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 69.556067] c2port c2port0: C2 port uc added [ 69.556069] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 69.557039] Uniform Multi-Platform E-IDE driver [ 69.557320] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 69.557577] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 69.557602] ide0: BM-DMA at 0xc000-0xc007 [ 69.557673] ide1: BM-DMA at 0xc008-0xc00f [ 69.557694] Probing IDE interface ide0... [ 70.096287] Probing IDE interface ide1... [ 70.824506] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 71.496354] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 71.496480] hdc: MWDMA2 mode selected [ 71.496816] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 71.497005] ide1 at 0x170-0x177,0x376 on irq 15 [ 71.498807] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 71.498896] ide-gd driver 1.18 [ 71.499001] ide-cd driver 5.00 [ 71.500334] ide-cd: hdc: ATAPI 4X CD-ROM drive, 512kB Cache [ 71.500335] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 71.889090] Loading iSCSI transport class v2.0-870. [ 72.239621] rdac: device handler registered [ 72.239744] hp_sw: device handler registered [ 72.239746] emc: device handler registered [ 72.239749] alua: device handler registered [ 72.829337] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2 [ 73.679809] iscsi: registered transport (tcp) [ 73.681157] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 73.681158] Detecting Adaptec I2O RAID controllers... [ 73.681490] Adaptec aacraid driver 1.2-0[28900]-ms [ 73.682032] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 74.172663] scsi: <fdomain> Detection failed (no card) [ 74.403366] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k. [ 74.660371] iscsi: registered transport (qla4xxx) [ 74.660458] QLogic iSCSI HBA Driver [ 74.660459] Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0 [ 74.661071] DC390: clustering now enabled by default. If you get problems load [ 74.661072] with "disable_clustering=1" and report to maintainers [ 74.661306] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 74.661530] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 74.661632] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012 [ 74.661777] mpt2sas version 13.100.00.00 loaded [ 74.662224] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 74.662490] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 74.662791] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 74.662922] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 74.663007] ppa: Version 2.07 (for Linux 2.4.x) [ 74.666169] imm: Version 2.05 (for Linux 2.4.0) [ 74.667015] ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012) [ 74.667109] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) [ 74.667190] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 74.886911] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 74.886915] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 74.886916] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 74.887048] iscsi: registered transport (cxgb3i) [ 74.887082] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) [ 74.887209] iscsi: registered transport (cxgb4i) [ 74.887239] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012) [ 74.887373] iscsi: registered transport (bnx2i) [ 74.887791] iscsi: registered transport (be2iscsi) [ 75.130356] VMware PVSCSI driver - version 1.0.2.0-k [ 75.130468] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 75.130546] osst :I: Tape driver with OnStream support version 0.99.4 [ 75.130546] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 75.357513] SCSI Media Changer driver v0.25 [ 75.357730] osd: LOADED open-osd 0.2.1 [ 75.370275] scsi_debug: host protection [ 75.370277] scsi0 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0 [ 75.623372] SSFDC read-only Flash Translation layer [ 75.623375] mtdoops: mtd device (mtddev=name/number) must be supplied [ 75.623522] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 75.624414] NetSc520 flash device: 0x100000 at 0x200000 [ 75.624417] Failed to ioremap_nocache [ 75.624418] Failed to ioremap_nocache [ 75.625206] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 [ 75.627308] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 75.628031] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 75.656039] No recognised DiskOnChip devices found [ 75.656040] slram: not enough parameters. [ 75.656041] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 75.656204] scsi_scan_0 (132) used greatest stack depth: 4280 bytes left [ 75.656341] pmc551: not detected [ 75.660408] ftl_cs: FTL header not found. [ 75.693860] No valid DiskOnChip devices found [ 75.693941] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693942] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693943] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693944] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693945] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693946] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 75.693955] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), page size: 512, OOB size: 16 [ 75.693969] flash size: 128 MiB [ 75.693969] page size: 512 bytes [ 75.693970] OOB area size: 16 bytes [ 75.693971] sector size: 16 KiB [ 75.693971] pages number: 262144 [ 75.693972] pages per sector: 32 [ 75.693972] bus width: 8 [ 75.693973] bits in sector size: 14 [ 75.693973] bits in page size: 9 [ 75.693974] bits in OOB size: 4 [ 75.693975] flash size with OOB: 135168 KiB [ 75.693975] page address bytes: 4 [ 75.693976] sector address bytes: 3 [ 75.693976] options: 0x42 [ 75.852509] Scanning device for bad blocks [ 75.929226] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 75.930390] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 75.930395] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 75.931372] ftl_cs: FTL header not found. [ 75.932663] usbcore: registered new interface driver alauda [ 76.042709] onenand_wait: timeout! ctrl=0x0000 intr=0x0000 [ 76.042711] OneNAND Manufacturer: Samsung (0xec) [ 76.042717] OneNAND 16MB 1.8V 16-bit (0x04) [ 76.042717] OneNAND version = 0x001e [ 76.042718] Lock scheme is Continuous Lock [ 76.042769] Scanning device for bad blocks [ 76.044125] sd 0:0:0:0: [sda] Write Protect is off [ 76.044127] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 76.044951] Creating 1 MTD partitions on "OneNAND simulator": [ 76.044970] 0x000000000000-0x000001000000 : "OneNAND simulator partition" [ 76.045947] ftl_cs: FTL header not found. [ 76.452133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 76.628815] parport_pc 00:05: master is unqueued, this is deprecated [ 76.632663] parport0: AVR Butterfly [ 76.632705] parport0: cannot grant exclusive access for device spi-lm70llp [ 76.632719] spi-lm70llp: spi_lm70llp probe fail, status -12 [ 76.633021] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 76.636118] eql: Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 76.641517] tun: Universal TUN/TAP device driver, 1.6 [ 76.641518] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 76.641896] arcnet loaded. [ 76.641897] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 76.641898] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 76.641899] arcnet: raw mode (`r') encapsulation support loaded. [ 76.641900] arcnet: cap mode (`c') encapsulation support loaded. [ 76.641930] arcnet: COM90xx chipset support [ 76.944882] S3: No ARCnet cards found. [ 76.944938] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 76.944939] E-mail me if you actually test this driver, please! [ 76.944940] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 76.944965] arcnet: RIM I (entirely mem-mapped) support [ 76.944966] E-mail me if you actually test the RIM I driver, please! [ 76.944967] Given: node 00h, shmem 0h, irq 0 [ 76.944970] No autoprobe for RIM I; you must specify the shmem and irq! [ 76.944979] arcnet: COM20020 PCI support [ 76.945131] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <[email protected]> [ 76.945645] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <[email protected]> [ 76.945646] vcan: Virtual CAN interface driver [ 76.945650] CAN device driver interface [ 76.945745] usbcore: registered new interface driver ems_usb [ 76.945807] usbcore: registered new interface driver esd_usb2 [ 76.945811] sja1000 CAN netdevice driver [ 76.946787] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012) [ 76.947019] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.72.50-0 (2012/04/23) [ 76.947384] Brocade 10G Ethernet driver - version: 3.0.23.0 [ 76.948199] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.39 [ 76.948582] vxge: Copyright(c) 2002-2010 Exar Corp. [ 76.948583] vxge: Driver version: 2.5.3.22640-k [ 76.948686] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 76.948686] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 76.948866] e1000 0000:00:03.0: setting latency timer to 64 [ 78.644963] sda: unknown partition table [ 78.646134] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 78.646182] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection [ 78.646289] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 78.646290] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 78.646378] igb: Intel(R) Gigabit Ethernet Network Driver - version 3.4.7-k [ 78.646379] igb: Copyright (c) 2007-2012 Intel Corporation. [ 78.646487] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k [ 78.646488] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 78.646597] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.9.15-k [ 78.646598] ixgbe: Copyright (c) 1999-2012 Intel Corporation. [ 78.646719] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.6.0-k [ 78.646720] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 78.646813] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 78.646814] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 78.647100] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 78.647494] sky2: driver version 1.30 [ 78.648089] myri10ge: Version 1.5.3-1.534 [ 78.648187] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 78.648704] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.28 [ 78.649129] QLogic/NetXen Network Driver v4.0.79 [ 78.649412] Solarflare NET driver v3.1 [ 78.649908] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 78.649908] tehuti: Options: hw_csum [ 78.650695] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 78.650697] AX.25: 6pack driver, Revision: 0.3.0 [ 78.650698] YAM driver version 0.8 by F1OAT/F6FBB [ 78.653863] AX.25: bpqether driver version 004 [ 78.653865] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 78.653865] baycom_ser_fdx: version 0.10 [ 78.656600] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 78.656601] hdlcdrv: version 0.8 [ 78.656604] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 78.656604] baycom_ser_hdx: version 0.10 [ 78.658755] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 78.658755] baycom_par: version 0.9 [ 78.661437] usbcore: registered new interface driver irda-usb [ 78.661512] usbcore: registered new interface driver stir4200 [ 78.667682] usbcore: registered new interface driver mcs7780 [ 78.668043] usbcore: registered new interface driver kingsun-sir [ 78.668096] usbcore: registered new interface driver ksdazzle-sir [ 78.668221] usbcore: registered new interface driver ks959-sir [ 78.668748] NET3 PLIP version 2.4-parport [email protected] [ 78.668750] plip0: Parallel port at 0x378, using IRQ 7. [ 78.668751] PPP generic driver version 2.4.2 [ 78.669028] PPP BSD Compression module registered [ 78.669030] PPP Deflate Compression module registered [ 78.670563] PPP MPPE Compression module registered [ 78.670566] NET: Registered protocol family 24 [ 78.670600] PPTP driver version 0.8.5 [ 78.671362] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 78.671362] CSLIP: code copyright 1989 Regents of the University of California. [ 78.671363] SLIP linefill/keepalive option. [ 78.671431] hdlc: HDLC support module revision 1.22 [ 78.671618] DLCI driver v0.35, 4 Jan 1997, [email protected]. [ 78.671623] cycx_drv: Cyclom 2X Support Module v0.6 (c) 1998-2003 Arnaldo Carvalho de Melo <[email protected]> [ 78.671624] cyclomx: CYCLOM 2X(tm) Sync Card Driver v0.11 (c) 1998-2003 Arnaldo Carvalho de Melo <[email protected]> [ 78.671871] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 78.671871] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 78.671953] libipw: 802.11 data/management/control stack, git-1.1.13 [ 78.671954] libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 78.671955] orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al) [ 78.672034] orinoco_plx 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]>, Daniel Barlow <[email protected]>) [ 78.672110] orinoco_tmd 0.15 (Joerg Dorchain <[email protected]>) [ 78.672183] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <[email protected]>) [ 78.672366] usbcore: registered new interface driver orinoco_usb [ 78.672393] airo(): Probing for PCI adapters [ 78.672480] airo(): Finished probing for PCI adapters [ 78.672633] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 78.672705] usbcore: registered new interface driver at76c50x-usb [ 78.673221] Broadcom 43xx driver loaded [ Features: PMLS ] [ 78.673347] Broadcom 43xx-legacy driver loaded [ Features: PLID ] [ 78.673732] usbcore: registered new interface driver zd1211rw [ 78.673975] usbcore: registered new interface driver rtl8187 [ 78.674377] usbcore: registered new interface driver rndis_wlan [ 78.674432] usbcore: registered new interface driver zd1201 [ 78.674524] usbcore: registered new interface driver usb8xxx [ 78.674577] libertas_sdio: Libertas SDIO driver [ 78.674577] libertas_sdio: Copyright Pierre Ossman [ 78.674620] libertas_spi: Libertas SPI driver [ 78.674891] usbcore: registered new interface driver lbtf_usb [ 78.675081] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 78.675082] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 78.675629] usbcore: registered new interface driver rt2500usb [ 78.675691] usbcore: registered new interface driver rt73usb [ 78.675757] usbcore: registered new interface driver rt2800usb [ 78.675926] usbcore: registered new interface driver p54usb [ 78.676343] usbcore: registered new interface driver ath9k_htc [ 78.676404] usbcore: registered new interface driver carl9170 [ 78.676460] mac80211_hwsim: Initializing radio 0 [ 78.677811] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 78.678711] ieee80211 phy0: hwaddr 020000000000 registered [ 78.678884] mac80211_hwsim: Initializing radio 1 [ 78.679623] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 78.680573] ieee80211 phy1: hwaddr 020000000100 registered [ 78.681242] mac80211_hwsim: initializing netlink [ 78.681394] usbcore: registered new interface driver i2400m_usb [ 78.681429] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI [ 78.681560] usbcore: registered new interface driver catc [ 78.681625] usbcore: registered new interface driver kaweth [ 78.681626] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 78.681682] usbcore: registered new interface driver pegasus [ 78.681739] usbcore: registered new interface driver rtl8150 [ 78.681740] hso: /c/kernel-tests/tip/drivers/net/usb/hso.c: Option Wireless [ 78.681866] usbcore: registered new interface driver hso [ 78.681923] usbcore: registered new interface driver asix [ 78.682034] usbcore: registered new interface driver cdc_ether [ 78.682119] usbcore: registered new interface driver cdc_eem [ 78.682198] usbcore: registered new interface driver dm9601 [ 78.682339] usbcore: registered new interface driver smsc75xx [ 78.682452] usbcore: registered new interface driver smsc95xx [ 78.682522] usbcore: registered new interface driver gl620a [ 78.682577] usbcore: registered new interface driver net1080 [ 78.682661] usbcore: registered new interface driver plusb [ 78.682744] usbcore: registered new interface driver rndis_host [ 78.682827] usbcore: registered new interface driver cdc_subset [ 78.682945] usbcore: registered new interface driver zaurus [ 78.683013] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 78.683073] usbcore: registered new interface driver int51x1 [ 78.683127] usbcore: registered new interface driver cdc_phonet [ 78.683192] usbcore: registered new interface driver ipheth [ 78.683244] usbcore: registered new interface driver sierra_net [ 78.683297] usbcore: registered new interface driver cx82310_eth [ 78.683363] usbcore: registered new interface driver cdc_ncm [ 78.683515] Madge ATM Ambassador driver version 1.2.4 [ 78.683620] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 78.683884] fore200e: FORE Systems 200E-series ATM driver - version 0.3e [ 78.684069] idt77252_init: at ffffffff83ff97d2 [ 78.684201] Solos PCI Driver Version 0.07 [ 78.684300] adummy: version 1.0 [ 78.684921] I2O subsystem v1.325 [ 78.684922] i2o: max drivers = 8 [ 78.685366] I2O Configuration OSM v1.323 [ 78.685644] I2O Bus Adapter OSM v1.317 [ 78.685693] I2O Block Device OSM v1.325 [ 78.931653] I2O SCSI Peripheral OSM v1.316 [ 78.931701] I2O ProcFS OSM v1.316 [ 78.931801] Fusion MPT base driver 3.04.20 [ 78.931804] Copyright (c) 1999-2008 LSI Corporation [ 78.931924] Fusion MPT SPI Host driver 3.04.20 [ 78.932719] Fusion MPT FC Host driver 3.04.20 [ 78.932906] Fusion MPT SAS Host driver 3.04.20 [ 78.933078] Fusion MPT misc device (ioctl) driver 3.04.20 [ 78.933267] mptctl: Registered with Fusion MPT base driver [ 78.933269] mptctl: /dev/mptctl @ (major,minor=10,220) [ 78.933270] Fusion MPT LAN driver 3.04.20 [ 79.186424] Generic UIO driver for PCI 2.3 devices version: 0.01.0 [ 79.393345] aoe: AoE v47 initialised. [ 79.395321] usbcore: registered new interface driver hwa-rc [ 79.395408] usbcore: registered new interface driver i1480-dfu-usb [ 79.396217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 79.396462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 79.396644] uhci_hcd: USB Universal Host Controller Interface driver [ 79.611410] driver u132_hcd [ 79.611815] usbcore: registered new interface driver hwa-hc [ 79.612183] sd 0:0:0:0: [sda] Attached SCSI disk [ 79.612346] usbcore: registered new interface driver wusb-cbaf [ 79.612467] usbcore: registered new interface driver cdc_acm [ 79.612468] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 79.612567] usbcore: registered new interface driver usblp [ 79.612645] usbcore: registered new interface driver cdc_wdm [ 79.612722] usbcore: registered new interface driver usbtmc [ 79.612815] usbcore: registered new interface driver uas [ 79.612849] Initializing USB Mass Storage driver... [ 79.612956] usbcore: registered new interface driver usb-storage [ 79.612957] USB Mass Storage support registered. [ 79.613048] usbcore: registered new interface driver ums-alauda [ 79.613108] usbcore: registered new interface driver ums-cypress [ 79.613170] usbcore: registered new interface driver ums-datafab [ 79.613255] usbcore: registered new interface driver ums-freecom [ 79.613327] usbcore: registered new interface driver ums-isd200 [ 79.613406] usbcore: registered new interface driver ums-jumpshot [ 79.613482] usbcore: registered new interface driver ums-karma [ 79.613566] usbcore: registered new interface driver ums-onetouch [ 79.613659] usbcore: registered new interface driver ums-sddr09 [ 79.613745] usbcore: registered new interface driver ums-sddr55 [ 79.613866] usbcore: registered new interface driver ums-usbat [ 79.613996] usbcore: registered new interface driver mdc800 [ 79.614003] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 79.614076] usbcore: registered new interface driver microtekX6 [ 79.614266] usbcore: registered new interface driver usbserial [ 79.614332] usbcore: registered new interface driver usbserial_generic [ 79.614489] USB Serial support registered for generic [ 79.614492] usbserial: USB Serial Driver core [ 79.614583] usbcore: registered new interface driver aircable [ 79.614646] USB Serial support registered for aircable [ 79.614738] usbcore: registered new interface driver ark3116 [ 79.614858] USB Serial support registered for ark3116 [ 79.614939] usbcore: registered new interface driver belkin_sa [ 79.615008] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 79.615082] usbcore: registered new interface driver ch341 [ 79.615152] USB Serial support registered for ch341-uart [ 79.615225] usbcore: registered new interface driver cp210x [ 79.615295] USB Serial support registered for cp210x [ 79.615463] usbcore: registered new interface driver cyberjack [ 79.615566] USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 79.615681] usbcore: registered new interface driver cypress_m8 [ 79.615752] USB Serial support registered for DeLorme Earthmate USB [ 79.615879] USB Serial support registered for HID->COM RS232 Adapter [ 79.615952] USB Serial support registered for Nokia CA-42 V2 Adapter [ 79.616047] usbcore: registered new interface driver usb_debug [ 79.616105] USB Serial support registered for debug [ 79.616187] usbcore: registered new interface driver digi_acceleport [ 79.616243] USB Serial support registered for Digi 2 port USB adapter [ 79.616294] USB Serial support registered for Digi 4 port USB adapter [ 79.616362] usbcore: registered new interface driver io_edgeport [ 79.616430] USB Serial support registered for Edgeport 2 port adapter [ 79.616482] USB Serial support registered for Edgeport 4 port adapter [ 79.616535] USB Serial support registered for Edgeport 8 port adapter [ 79.616605] USB Serial support registered for EPiC device [ 79.616706] usbcore: registered new interface driver io_ti [ 79.616763] USB Serial support registered for Edgeport TI 1 port adapter [ 79.616852] USB Serial support registered for Edgeport TI 2 port adapter [ 79.616924] usbcore: registered new interface driver empeg [ 79.616993] USB Serial support registered for empeg [ 79.617064] usbcore: registered new interface driver ftdi_sio [ 79.617118] USB Serial support registered for FTDI USB Serial Device [ 79.617120] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver [ 79.617186] usbcore: registered new interface driver funsoft [ 79.617255] USB Serial support registered for funsoft [ 79.617321] usbcore: registered new interface driver garmin_gps [ 79.617395] USB Serial support registered for Garmin GPS usb/tty [ 79.617461] usbcore: registered new interface driver hp4x [ 79.617530] USB Serial support registered for hp4X [ 79.617604] usbcore: registered new interface driver ipaq [ 79.617677] USB Serial support registered for PocketPC PDA [ 79.617769] usbcore: registered new interface driver ipw [ 79.617875] USB Serial support registered for IPWireless converter [ 79.617965] usbcore: registered new interface driver ir_usb [ 79.618041] USB Serial support registered for IR Dongle [ 79.618044] ir_usb: v0.5:USB IR Dongle driver [ 79.618151] usbcore: registered new interface driver iuu_phoenix [ 79.618216] USB Serial support registered for iuu_phoenix [ 79.618336] usbcore: registered new interface driver keyspan [ 79.618393] USB Serial support registered for Keyspan - (without firmware) [ 79.618463] USB Serial support registered for Keyspan 1 port adapter [ 79.618521] USB Serial support registered for Keyspan 2 port adapter [ 79.618573] USB Serial support registered for Keyspan 4 port adapter [ 79.618651] usbcore: registered new interface driver keyspan_pda [ 79.618736] USB Serial support registered for Keyspan PDA [ 79.618789] USB Serial support registered for Keyspan PDA - (prerenumeration) [ 79.618880] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) [ 79.618961] usbcore: registered new interface driver kl5kusb105 [ 79.619030] USB Serial support registered for KL5KUSB105D / PalmConnect [ 79.619107] usbcore: registered new interface driver kobil_sct [ 79.619166] USB Serial support registered for KOBIL USB smart card terminal [ 79.619265] usbcore: registered new interface driver mct_u232 [ 79.619332] USB Serial support registered for MCT U232 [ 79.619412] usbcore: registered new interface driver mos7720 [ 79.619468] USB Serial support registered for Moschip 2 port adapter [ 79.619548] usbcore: registered new interface driver mos7840 [ 79.619624] USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 79.619716] usbcore: registered new interface driver moto_modem [ 79.619787] USB Serial support registered for moto-modem [ 79.619924] usbcore: registered new interface driver navman [ 79.620012] USB Serial support registered for navman [ 79.620166] usbcore: registered new interface driver omninet [ 79.620222] USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 79.620327] usbcore: registered new interface driver opticon [ 79.620422] USB Serial support registered for opticon [ 79.620504] usbcore: registered new interface driver option [ 79.620560] USB Serial support registered for GSM modem (1-port) [ 79.620701] usbcore: registered new interface driver oti6858 [ 79.620769] USB Serial support registered for oti6858 [ 79.620886] usbcore: registered new interface driver pl2303 [ 79.620943] USB Serial support registered for pl2303 [ 79.621058] usbcore: registered new interface driver qcaux [ 79.621140] USB Serial support registered for qcaux [ 79.621248] usbcore: registered new interface driver qcserial [ 79.621344] USB Serial support registered for Qualcomm USB modem [ 79.621347] safe_serial: v0.1:USB Safe Encapsulated Serial [ 79.621469] usbcore: registered new interface driver safe_serial [ 79.621525] USB Serial support registered for safe_serial [ 79.621604] usbcore: registered new interface driver siemens_mpi [ 79.621664] USB Serial support registered for siemens_mpi [ 79.621756] usbcore: registered new interface driver sierra [ 79.621810] USB Serial support registered for Sierra USB modem [ 79.621921] usbcore: registered new interface driver spcp8x5 [ 79.621979] USB Serial support registered for SPCP8x5 [ 79.622109] usbcore: registered new interface driver ssu100 [ 79.622187] USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 79.622269] usbcore: registered new interface driver symbolserial [ 79.622347] USB Serial support registered for symbol [ 79.622466] usbcore: registered new interface driver ti_usb_3410_5052 [ 79.622522] USB Serial support registered for TI USB 3410 1 port adapter [ 79.622588] USB Serial support registered for TI USB 5052 2 port adapter [ 79.622590] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver [ 79.622721] usbcore: registered new interface driver visor [ 79.622786] USB Serial support registered for Handspring Visor / Palm OS [ 79.622879] USB Serial support registered for Sony Clie 5.0 [ 79.622960] USB Serial support registered for Sony Clie 3.5 [ 79.623089] usbcore: registered new interface driver whiteheat [ 79.623146] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 79.623202] USB Serial support registered for Connect Tech - WhiteHEAT [ 79.623344] usbcore: registered new interface driver vivopay_serial [ 79.623427] USB Serial support registered for vivopay-serial [ 79.623529] usbcore: registered new interface driver zio [ 79.623604] USB Serial support registered for zio [ 79.623704] usbcore: registered new interface driver adutux [ 79.624080] usbcore: registered new interface driver appledisplay [ 79.624189] usbcore: registered new interface driver cypress_cy7c63 [ 79.624263] usbcore: registered new interface driver cytherm [ 79.624350] usbcore: registered new interface driver emi26 - firmware loader [ 79.624416] usbcore: registered new interface driver emi62 - firmware loader [ 79.624422] driver ftdi-elan [ 79.625098] usbcore: registered new interface driver ftdi-elan [ 79.625183] usbcore: registered new interface driver idmouse [ 79.625293] usbcore: registered new interface driver iowarrior [ 79.625406] usbcore: registered new interface driver isight_firmware [ 79.625493] usbcore: registered new interface driver usblcd [ 79.625597] usbcore: registered new interface driver ldusb [ 79.625668] usbcore: registered new interface driver usbled [ 79.625789] usbcore: registered new interface driver legousbtower [ 79.625931] usbcore: registered new interface driver rio500 [ 79.626035] usbcore: registered new interface driver usbtest [ 79.626144] usbcore: registered new interface driver trancevibrator [ 79.626231] usbcore: registered new interface driver uss720 [ 79.626237] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 79.626237] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 79.626238] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 79.626239] uss720: If you just want to connect to a printer, use usblp instead [ 79.626356] usbcore: registered new interface driver usbsevseg [ 79.626453] usbcore: registered new interface driver yurex [ 79.626534] usbcore: registered new interface driver sisusb [ 79.626608] usbcore: registered new interface driver cxacru [ 79.626745] usbcore: registered new interface driver speedtch [ 79.626875] usbcore: registered new interface driver ueagle-atm [ 79.626877] xusbatm: malformed module parameters [ 79.627096] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 79.636546] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 79.636640] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 79.637315] parport0: cannot grant exclusive access for device parkbd [ 79.883002] mousedev: PS/2 mouse device common for all mice [ 79.886694] usbcore: registered new interface driver appletouch [ 79.886756] usbcore: registered new interface driver bcm5974 [ 79.887764] usbcore: registered new interface driver iforce [ 79.888537] usbcore: registered new interface driver xpad [ 79.888611] parport0: cannot grant exclusive access for device walkera0701 [ 79.888673] usbcore: registered new interface driver usb_acecad [ 79.888729] usbcore: registered new interface driver aiptek [ 79.888785] usbcore: registered new interface driver gtco [ 79.888882] usbcore: registered new interface driver hanwang [ 79.888958] usbcore: registered new interface driver kbtab [ 79.889014] usbcore: registered new interface driver wacom [ 79.890535] mk712: device not present [ 79.890632] usbcore: registered new interface driver usbtouchscreen [ 79.891207] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 79.891311] usbcore: registered new interface driver ati_remote2 [ 79.891417] cm109: Keymap for Komunikate KIP1000 phone loaded [ 79.891481] usbcore: registered new interface driver cm109 [ 79.891482] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 79.891585] usbcore: registered new interface driver keyspan_remote [ 79.891905] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 79.892319] usbcore: registered new interface driver powermate [ 79.892538] usbcore: registered new interface driver yealink [ 79.895024] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 79.896321] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 79.900708] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 79.901077] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 79.901210] i2c /dev entries driver [ 79.902180] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 80.076717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 81.353254] i2c-parport: adapter type unspecified [ 81.353256] i2c-parport-light: adapter type unspecified [ 81.353550] usbcore: registered new interface driver i2c-tiny-usb [ 81.353787] lirc_dev: IR Remote Control driver registered, major 225 [ 81.353820] IR NEC protocol handler initialized [ 81.353823] IR RC5(x) protocol handler initialized [ 81.353824] IR RC6 protocol handler initialized [ 81.353826] IR JVC protocol handler initialized [ 81.353831] IR Sony protocol handler initialized [ 81.353833] IR RC5 (streamzap) protocol handler initialized [ 81.353834] IR SANYO protocol handler initialized [ 81.353836] IR MCE Keyboard/mouse protocol handler initialized [ 81.353838] IR LIRC bridge handler initialized [ 81.353958] usbcore: registered new interface driver imon [ 81.354086] usbcore: registered new interface driver mceusb [ 81.354386] usbcore: registered new interface driver streamzap [ 81.357057] bttv: driver version 0.9.19 loaded [ 81.357063] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 81.357064] bttv: Host bridge needs ETBF enabled [ 81.357498] Zoran MJPEG board driver version 0.10.1 [ 81.357623] Linux video codec intermediate layer: v0.2 [ 81.357671] meye: using 2 buffers with 600k (1200k total) for capture [ 81.357941] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 81.358148] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded [ 81.358297] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded [ 81.358472] cx2388x alsa driver version 0.0.9 loaded [ 81.358595] cx2388x blackbird driver version 0.0.9 loaded [ 81.358596] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 81.358635] cx88/2: cx2388x dvb driver version 0.0.9 loaded [ 81.358636] cx88/2: registering cx8802 driver, type: dvb access: shared [ 81.358809] usbcore: registered new interface driver em28xx [ 81.358880] Em28xx: Initialized (Em28xx Audio Extension) extension [ 81.358883] Em28xx: Initialized (Em28xx dvb Extension) extension [ 81.358885] Em28xx: Initialized (Em28xx Input Extension) extension [ 81.359025] usbcore: registered new interface driver poseidon [ 81.359130] usbcore: registered new interface driver cx231xx [ 81.359172] cx231xx: Cx231xx Audio Extension initialized [ 81.359175] cx231xx: Cx231xx dvb Extension initialized [ 81.359298] usbcore: registered new interface driver usbvision [ 81.359299] USBVision USB Video Device Driver for Linux : 0.9.11 [ 81.359659] usbcore: registered new interface driver pvrusb2 [ 81.359661] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 81.359662] pvrusb2: Debug mask is 31 (0x1f) [ 81.359667] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1 [ 81.359765] usbcore: registered new interface driver cpia2 [ 81.359777] saa7146: register extension 'Multimedia eXtension Board' [ 81.359967] saa7146: register extension 'hexium HV-PCI6 Orion' [ 81.360141] saa7146: register extension 'hexium gemini' [ 81.360374] usbcore: registered new interface driver zr364xx [ 81.360475] usbcore: registered new interface driver stkwebcam [ 81.360586] usbcore: registered new interface driver sn9c102 [ 81.360688] usbcore: registered new interface driver Philips webcam [ 81.360689] gspca_main: v2.14.0 registered [ 81.360793] usbcore: registered new interface driver benq [ 81.360944] usbcore: registered new interface driver conex [ 81.361053] usbcore: registered new interface driver cpia1 [ 81.361174] usbcore: registered new interface driver etoms [ 81.361290] usbcore: registered new interface driver finepix [ 81.361388] usbcore: registered new interface driver jeilinj [ 81.361463] usbcore: registered new interface driver konica [ 81.361536] usbcore: registered new interface driver mars [ 81.361636] usbcore: registered new interface driver mr97310a [ 81.361717] usbcore: registered new interface driver ov519 [ 81.361806] usbcore: registered new interface driver ov534 [ 81.361911] usbcore: registered new interface driver ov534_9 [ 81.361988] usbcore: registered new interface driver pac207 [ 81.362080] usbcore: registered new interface driver gspca_pac7302 [ 81.362166] usbcore: registered new interface driver pac7311 [ 81.362242] usbcore: registered new interface driver sn9c2028 [ 81.362316] usbcore: registered new interface driver gspca_sn9c20x [ 81.362406] usbcore: registered new interface driver sonixb [ 81.362477] usbcore: registered new interface driver sonixj [ 81.362551] usbcore: registered new interface driver spca500 [ 81.362626] usbcore: registered new interface driver spca501 [ 81.362714] usbcore: registered new interface driver spca505 [ 81.362792] usbcore: registered new interface driver spca506 [ 81.362902] usbcore: registered new interface driver spca508 [ 81.362990] usbcore: registered new interface driver spca561 [ 81.363061] usbcore: registered new interface driver spca1528 [ 81.363136] usbcore: registered new interface driver sq905 [ 81.363212] usbcore: registered new interface driver sq905c [ 81.363298] usbcore: registered new interface driver sq930x [ 81.363373] usbcore: registered new interface driver sunplus [ 81.363447] usbcore: registered new interface driver stk014 [ 81.363538] usbcore: registered new interface driver stv0680 [ 81.363611] usbcore: registered new interface driver t613 [ 81.363683] usbcore: registered new interface driver tv8532 [ 81.363758] usbcore: registered new interface driver vc032x [ 81.363894] usbcore: registered new interface driver xirlink-cit [ 81.363982] usbcore: registered new interface driver gspca_zc3xx [ 81.364105] usbcore: registered new interface driver ALi m5602 [ 81.364197] usbcore: registered new interface driver STV06xx [ 81.364331] usbcore: registered new interface driver gspca_gl860 [ 81.364411] usbcore: registered new interface driver hdpvr [ 81.364490] usbcore: registered new interface driver s2255 [ 81.364491] ivtv: Start initialization, version 1.4.3 [ 81.364609] ivtv: End initialization [ 81.364625] ivtvfb: no cards found [ 81.364627] cx18: Start initialization, version 1.5.1 [ 81.364723] cx18: End initialization [ 81.364724] cx18-alsa: module loading... [ 81.365260] vivi-000: V4L2 device registered as video0 [ 81.365262] Video Technology Magazine Virtual Video Capture Board ver 0.8.1 successfully loaded. [ 81.365267] cx23885 driver version 0.0.3 loaded [ 81.365440] au0828 driver loaded [ 81.365536] usbcore: registered new interface driver au0828 [ 81.365737] usbcore: registered new interface driver uvcvideo [ 81.365738] USB Video Class driver (1.1.1) [ 81.365739] saa7164 driver loaded [ 81.366475] usbcore: registered new interface driver dsbr100 [ 81.366579] usbcore: registered new interface driver radio-si470x [ 81.366655] usbcore: registered new interface driver radio-mr800 [ 81.366958] saa7146: register extension 'budget dvb' [ 81.367058] saa7146: register extension 'budget_av' [ 81.367179] saa7146: register extension 'budget_ci dvb' [ 81.367281] saa7146: register extension 'budget_patch dvb' [ 81.367403] saa7146: register extension 'av7110' [ 81.367642] usbcore: registered new interface driver ttusb-dec [ 81.367756] usbcore: registered new interface driver ttusb [ 81.367758] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 81.368107] usbcore: registered new interface driver b2c2_flexcop_usb [ 81.368109] bt878: AUDIO driver version 0.0.0 loaded [ 81.368440] usbcore: registered new interface driver dvb_usb_vp7045 [ 81.368555] usbcore: registered new interface driver dvb_usb_vp702x [ 81.368658] usbcore: registered new interface driver dvb_usb_gp8psk [ 81.368824] usbcore: registered new interface driver dvb_usb_dtt200u [ 81.368983] usbcore: registered new interface driver dvb_usb_a800 [ 81.369113] usbcore: registered new interface driver dvb_usb_dibusb_mb [ 81.369237] usbcore: registered new interface driver dvb_usb_dibusb_mc [ 81.369397] usbcore: registered new interface driver dvb_usb_nova_t_usb2 [ 81.369535] usbcore: registered new interface driver dvb_usb_umt_010 [ 81.369633] usbcore: registered new interface driver dvb_usb_m920x [ 81.369717] usbcore: registered new interface driver dvb_usb_gl861 [ 81.369833] usbcore: registered new interface driver dvb_usb_au6610 [ 81.370004] usbcore: registered new interface driver dvb_usb_digitv [ 81.370114] usbcore: registered new interface driver dvb_usb_cxusb [ 81.370253] usbcore: registered new interface driver dvb_usb_ttusb2 [ 81.370353] usbcore: registered new interface driver dvb_usb_dib0700 [ 81.370480] usbcore: registered new interface driver opera1 [ 81.370560] usbcore: registered new interface driver dvb_usb_af9005 [ 81.370720] usbcore: registered new interface driver dvb_usb_anysee [ 81.370898] usbcore: registered new interface driver dw2102
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.5.0-rc2 Kernel Configuration
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=yCONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_CPU_AUTOPROBE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_HAVE_IRQ_WORK=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set CONFIG_RCU_FAST_NO_HZ=y CONFIG_TREE_RCU_TRACE=y
# CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set # CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set # CONFIG_CGROUP_PERF is not set CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EXPERT is not setCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not setCONFIG_SLAB=y
# CONFIG_SLUB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not setCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not setCONFIG_OPTPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_OLD_COMPAT_IPC=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not setCONFIG_XEN=yCONFIG_XEN_DOM0=yCONFIG_XEN_PRIVILEGED_GUEST=yCONFIG_XEN_PVHVM=yCONFIG_XEN_MAX_DOMAIN_MEMORY=500CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not setCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not setCONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_NO_BOOTMEM=yCONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS=512CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_PREEMPT_COUNT=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=yCONFIG_X86_THERMAL_VECTOR=yCONFIG_I8K=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=yCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_ARCH_DMA_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=yCONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=6CONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_MEMORY_PROBE=yCONFIG_ARCH_PROC_KCORE_TEXT=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_ARCH_DISCARD_MEMBLOCK=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=999999CONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=65536CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=y
# CONFIG_TRANSPARENT_HUGEPAGE is not setCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not setCONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=yCONFIG_ARCH_RANDOM=yCONFIG_EFI=y
# CONFIG_EFI_STUB is not setCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not setCONFIG_PHYSICAL_START=0x1000000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM_RUNTIME=yCONFIG_PM=yCONFIG_PM_DEBUG=yCONFIG_PM_ADVANCED_DEBUG=yCONFIG_PM_TEST_SUSPEND=yCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not setCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=yCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not setCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_SBS=yCONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not setCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_PCIEAER is not set
# CONFIG_ACPI_APEI_MEMORY_FAILURE is not set
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not setCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers # CONFIG_X86_PCC_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_INTEL_IDLE=y
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not setCONFIG_PCIEAER_INJECT=yCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not setCONFIG_PCI_STUB=yCONFIG_XEN_PCIDEV_FRONTEND=yCONFIG_HT_IRQ=yCONFIG_PCI_ATS=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=yCONFIG_PCI_IOAPIC=yCONFIG_PCI_LABEL=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=yCONFIG_I82092=yCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=yCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=yCONFIG_HOTPLUG_PCI_CPCI_GENERIC=yCONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_KEYS_COMPAT=yCONFIG_HAVE_TEXT_POKE_SMP=yCONFIG_X86_DEV_DMA_OPS=yCONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not setCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=yCONFIG_NET_IPGRE_DEMUX=yCONFIG_NET_IPGRE=yCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_MROUTE_MULTIPLE_TABLES=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=yCONFIG_TCP_CONG_HTCP=yCONFIG_TCP_CONG_HSTCP=yCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=yCONFIG_TCP_CONG_SCALABLE=yCONFIG_TCP_CONG_LP=yCONFIG_TCP_CONG_VENO=yCONFIG_TCP_CONG_YEAH=yCONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=yCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=yCONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=yCONFIG_IPV6_MIP6=yCONFIG_INET6_XFRM_TUNNEL=yCONFIG_INET6_TUNNEL=yCONFIG_INET6_XFRM_MODE_TRANSPORT=yCONFIG_INET6_XFRM_MODE_TUNNEL=yCONFIG_INET6_XFRM_MODE_BEET=yCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=yCONFIG_IPV6_SIT=yCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=yCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not setCONFIG_NETFILTER_NETLINK_QUEUE=yCONFIG_NETFILTER_NETLINK_LOG=yCONFIG_NF_CONNTRACK=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=yCONFIG_NF_CONNTRACK_PROCFS=yCONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not setCONFIG_NF_CT_PROTO_DCCP=yCONFIG_NF_CT_PROTO_GRE=yCONFIG_NF_CT_PROTO_SCTP=yCONFIG_NF_CT_PROTO_UDPLITE=yCONFIG_NF_CONNTRACK_AMANDA=yCONFIG_NF_CONNTRACK_FTP=yCONFIG_NF_CONNTRACK_H323=yCONFIG_NF_CONNTRACK_IRC=yCONFIG_NF_CONNTRACK_BROADCAST=yCONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not setCONFIG_NF_CONNTRACK_PPTP=yCONFIG_NF_CONNTRACK_SANE=yCONFIG_NF_CONNTRACK_SIP=yCONFIG_NF_CONNTRACK_TFTP=yCONFIG_NF_CT_NETLINK=y
# CONFIG_NF_CT_NETLINK_TIMEOUT is not setCONFIG_NETFILTER_TPROXY=yCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=yCONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not setCONFIG_NETFILTER_XT_TARGET_CHECKSUM=yCONFIG_NETFILTER_XT_TARGET_CLASSIFY=yCONFIG_NETFILTER_XT_TARGET_CONNMARK=yCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=yCONFIG_NETFILTER_XT_TARGET_CT=yCONFIG_NETFILTER_XT_TARGET_DSCP=yCONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not setCONFIG_NETFILTER_XT_TARGET_IDLETIMER=yCONFIG_NETFILTER_XT_TARGET_LED=y
# CONFIG_NETFILTER_XT_TARGET_LOG is not setCONFIG_NETFILTER_XT_TARGET_MARK=yCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_NFQUEUE=yCONFIG_NETFILTER_XT_TARGET_NOTRACK=yCONFIG_NETFILTER_XT_TARGET_RATEEST=yCONFIG_NETFILTER_XT_TARGET_TEE=yCONFIG_NETFILTER_XT_TARGET_TPROXY=yCONFIG_NETFILTER_XT_TARGET_TRACE=yCONFIG_NETFILTER_XT_TARGET_SECMARK=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=yCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not setCONFIG_NETFILTER_XT_MATCH_CLUSTER=yCONFIG_NETFILTER_XT_MATCH_COMMENT=yCONFIG_NETFILTER_XT_MATCH_CONNBYTES=yCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=yCONFIG_NETFILTER_XT_MATCH_CONNMARK=yCONFIG_NETFILTER_XT_MATCH_CONNTRACK=yCONFIG_NETFILTER_XT_MATCH_CPU=yCONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not setCONFIG_NETFILTER_XT_MATCH_DSCP=yCONFIG_NETFILTER_XT_MATCH_ECN=yCONFIG_NETFILTER_XT_MATCH_ESP=yCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=yCONFIG_NETFILTER_XT_MATCH_HELPER=yCONFIG_NETFILTER_XT_MATCH_HL=yCONFIG_NETFILTER_XT_MATCH_IPRANGE=yCONFIG_NETFILTER_XT_MATCH_IPVS=yCONFIG_NETFILTER_XT_MATCH_LENGTH=yCONFIG_NETFILTER_XT_MATCH_LIMIT=yCONFIG_NETFILTER_XT_MATCH_MAC=yCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not setCONFIG_NETFILTER_XT_MATCH_OSF=yCONFIG_NETFILTER_XT_MATCH_OWNER=yCONFIG_NETFILTER_XT_MATCH_POLICY=yCONFIG_NETFILTER_XT_MATCH_PHYSDEV=yCONFIG_NETFILTER_XT_MATCH_PKTTYPE=yCONFIG_NETFILTER_XT_MATCH_QUOTA=yCONFIG_NETFILTER_XT_MATCH_RATEEST=yCONFIG_NETFILTER_XT_MATCH_REALM=yCONFIG_NETFILTER_XT_MATCH_RECENT=yCONFIG_NETFILTER_XT_MATCH_SCTP=yCONFIG_NETFILTER_XT_MATCH_SOCKET=yCONFIG_NETFILTER_XT_MATCH_STATE=yCONFIG_NETFILTER_XT_MATCH_STATISTIC=yCONFIG_NETFILTER_XT_MATCH_STRING=yCONFIG_NETFILTER_XT_MATCH_TCPMSS=yCONFIG_NETFILTER_XT_MATCH_TIME=yCONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not setCONFIG_IP_VS=yCONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=yCONFIG_IP_VS_WRR=yCONFIG_IP_VS_LC=yCONFIG_IP_VS_WLC=yCONFIG_IP_VS_LBLC=yCONFIG_IP_VS_LBLCR=yCONFIG_IP_VS_DH=yCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=yCONFIG_IP_VS_NQ=y
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#CONFIG_IP_VS_FTP=yCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=y
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=yCONFIG_NF_CONNTRACK_IPV4=yCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_QUEUE=yCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_AH=yCONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_RPFILTER is not setCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_ULOG=yCONFIG_NF_NAT=yCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=yCONFIG_IP_NF_TARGET_NETMAP=yCONFIG_IP_NF_TARGET_REDIRECT=yCONFIG_NF_NAT_PROTO_DCCP=yCONFIG_NF_NAT_PROTO_GRE=yCONFIG_NF_NAT_PROTO_UDPLITE=yCONFIG_NF_NAT_PROTO_SCTP=yCONFIG_NF_NAT_FTP=yCONFIG_NF_NAT_IRC=yCONFIG_NF_NAT_TFTP=yCONFIG_NF_NAT_AMANDA=yCONFIG_NF_NAT_PPTP=yCONFIG_NF_NAT_H323=yCONFIG_NF_NAT_SIP=yCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_CLUSTERIP=yCONFIG_IP_NF_TARGET_ECN=yCONFIG_IP_NF_TARGET_TTL=yCONFIG_IP_NF_RAW=yCONFIG_IP_NF_SECURITY=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV6=yCONFIG_NF_CONNTRACK_IPV6=yCONFIG_IP6_NF_IPTABLES=yCONFIG_IP6_NF_MATCH_AH=yCONFIG_IP6_NF_MATCH_EUI64=yCONFIG_IP6_NF_MATCH_FRAG=yCONFIG_IP6_NF_MATCH_OPTS=yCONFIG_IP6_NF_MATCH_HL=yCONFIG_IP6_NF_MATCH_IPV6HEADER=yCONFIG_IP6_NF_MATCH_MH=y
# CONFIG_IP6_NF_MATCH_RPFILTER is not setCONFIG_IP6_NF_MATCH_RT=yCONFIG_IP6_NF_TARGET_HL=yCONFIG_IP6_NF_FILTER=yCONFIG_IP6_NF_TARGET_REJECT=yCONFIG_IP6_NF_MANGLE=yCONFIG_IP6_NF_RAW=yCONFIG_IP6_NF_SECURITY=y
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=yCONFIG_BRIDGE_NF_EBTABLES=yCONFIG_BRIDGE_EBT_BROUTE=yCONFIG_BRIDGE_EBT_T_FILTER=yCONFIG_BRIDGE_EBT_T_NAT=yCONFIG_BRIDGE_EBT_802_3=yCONFIG_BRIDGE_EBT_AMONG=yCONFIG_BRIDGE_EBT_ARP=yCONFIG_BRIDGE_EBT_IP=yCONFIG_BRIDGE_EBT_IP6=yCONFIG_BRIDGE_EBT_LIMIT=yCONFIG_BRIDGE_EBT_MARK=yCONFIG_BRIDGE_EBT_PKTTYPE=yCONFIG_BRIDGE_EBT_STP=yCONFIG_BRIDGE_EBT_VLAN=yCONFIG_BRIDGE_EBT_ARPREPLY=yCONFIG_BRIDGE_EBT_DNAT=yCONFIG_BRIDGE_EBT_MARK_T=yCONFIG_BRIDGE_EBT_REDIRECT=yCONFIG_BRIDGE_EBT_SNAT=yCONFIG_BRIDGE_EBT_LOG=yCONFIG_BRIDGE_EBT_ULOG=yCONFIG_BRIDGE_EBT_NFLOG=yCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not setCONFIG_NET_DCCPPROBE=yCONFIG_IP_SCTP=yCONFIG_NET_SCTPPROBE=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_RDS=yCONFIG_RDS_RDMA=yCONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not setCONFIG_TIPC=yCONFIG_TIPC_ADVANCED=yCONFIG_TIPC_PORTS=8191CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=yCONFIG_ATM_MPOA=yCONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_L2TP=yCONFIG_L2TP_DEBUGFS=yCONFIG_L2TP_V3=yCONFIG_L2TP_IP=yCONFIG_L2TP_ETH=yCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=yCONFIG_IPX=y
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_IPDDP=yCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not setCONFIG_LAPB=yCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=y
# CONFIG_IEEE802154_6LOWPAN is not set
# CONFIG_MAC802154 is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_ATM=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not setCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not setCONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=yCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_FLOW=yCONFIG_NET_CLS_CGROUP=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=yCONFIG_NET_EMATCH_META=yCONFIG_NET_EMATCH_TEXT=yCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=yCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=yCONFIG_NET_ACT_IPT=yCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=yCONFIG_NET_ACT_SKBEDIT=yCONFIG_NET_ACT_CSUM=yCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not setCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not setCONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#CONFIG_NET_PKTGEN=y
# CONFIG_NET_TCPPROBE is not setCONFIG_NET_DROP_MONITOR=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=yCONFIG_ROSE=y
#
# AX.25 network device drivers
#CONFIG_MKISS=yCONFIG_6PACK=yCONFIG_BPQETHER=yCONFIG_BAYCOM_SER_FDX=yCONFIG_BAYCOM_SER_HDX=yCONFIG_BAYCOM_PAR=yCONFIG_YAM=yCONFIG_CAN=yCONFIG_CAN_RAW=yCONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=y
# CONFIG_CAN_SLCAN is not setCONFIG_CAN_DEV=yCONFIG_CAN_CALC_BITTIMING=yCONFIG_CAN_MCP251X=yCONFIG_PCH_CAN=yCONFIG_CAN_SJA1000=y
# CONFIG_CAN_SJA1000_ISA is not set
# CONFIG_CAN_SJA1000_PLATFORM is not set
# CONFIG_CAN_EMS_PCMCIA is not setCONFIG_CAN_EMS_PCI=y
# CONFIG_CAN_PEAK_PCMCIA is not set
# CONFIG_CAN_PEAK_PCI is not setCONFIG_CAN_KVASER_PCI=yCONFIG_CAN_PLX_PCI=y
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
#
# CAN USB interfaces
#CONFIG_CAN_EMS_USB=yCONFIG_CAN_ESD_USB2=y
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRNET=yCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=yCONFIG_ACTISYS_DONGLE=yCONFIG_TEKRAM_DONGLE=yCONFIG_TOIM3232_DONGLE=yCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=yCONFIG_GIRBIL_DONGLE=yCONFIG_MCP2120_DONGLE=yCONFIG_OLD_BELKIN_DONGLE=yCONFIG_ACT200L_DONGLE=yCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=yCONFIG_KS959_DONGLE=y
#
# FIR device drivers
#CONFIG_USB_IRDA=yCONFIG_SIGMATEL_FIR=yCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=yCONFIG_SMC_IRCC_FIR=yCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=yCONFIG_MCS_FIR=yCONFIG_BT=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_CMTP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=yCONFIG_BT_HCIBTSDIO=yCONFIG_BT_HCIUART=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=yCONFIG_BT_HCIBFUSB=yCONFIG_BT_HCIDTL1=yCONFIG_BT_HCIBT3C=yCONFIG_BT_HCIBLUECARD=yCONFIG_BT_HCIBTUART=yCONFIG_BT_HCIVHCI=yCONFIG_BT_MRVL=yCONFIG_BT_MRVL_SDIO=yCONFIG_BT_ATH3K=yCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=yCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_MINSTREL_HT=yCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not setCONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=yCONFIG_NET_9P_RDMA=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not setCONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not setCONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not setCONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_DMA_SHARED_BUFFER=yCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=y
# CONFIG_MTD_TESTS is not setCONFIG_MTD_REDBOOT_PARTS=yCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not setCONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=yCONFIG_FTL=yCONFIG_NFTL=yCONFIG_NFTL_RW=yCONFIG_INFTL=yCONFIG_RFD_FTL=yCONFIG_SSFDC=y
# CONFIG_SM_FTL is not setCONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=yCONFIG_MTD_CFI_AMDSTD=yCONFIG_MTD_CFI_STAA=yCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=yCONFIG_MTD_ROM=yCONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_SC520CDP is not setCONFIG_MTD_NETSC520=yCONFIG_MTD_TS5500=yCONFIG_MTD_SBC_GXX=y
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not setCONFIG_MTD_PCI=yCONFIG_MTD_PCMCIA=y
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
# CONFIG_MTD_GPIO_ADDR is not setCONFIG_MTD_INTEL_VR_NOR=yCONFIG_MTD_PLATRAM=y
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not setCONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not setCONFIG_MTD_M25P80=yCONFIG_M25PXX_USE_FAST_READ=yCONFIG_MTD_SST25L=yCONFIG_MTD_SLRAM=yCONFIG_MTD_PHRAM=yCONFIG_MTD_MTDRAM=yCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTDRAM_ABS_POS=0CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=yCONFIG_MTD_DOC2001=yCONFIG_MTD_DOC2001PLUS=y
# CONFIG_MTD_DOCG3 is not set CONFIG_MTD_DOCPROBE=yCONFIG_MTD_DOCECC=y
# CONFIG_MTD_DOCPROBE_ADVANCED is not set CONFIG_MTD_DOCPROBE_ADDRESS=0x0 CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set CONFIG_MTD_SM_COMMON=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set CONFIG_MTD_NAND_IDS=yCONFIG_MTD_NAND_RICOH=y CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set # CONFIG_MTD_NAND_DOCG4 is not set CONFIG_MTD_NAND_CAFE=y CONFIG_MTD_NAND_NANDSIM=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_ALAUDA=yCONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y
# CONFIG_MTD_ONENAND_OTP is not set CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=y
#
# LPDDR flash memory drivers
#CONFIG_MTD_LPDDR=yCONFIG_MTD_QINFO_PROBE=yCONFIG_MTD_UBI=yCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not setCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=yCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not setCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=yCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not setCONFIG_BLK_DEV_DRBD=y
# CONFIG_DRBD_FAULT_INJECTION is not setCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_NVME is not setCONFIG_BLK_DEV_OSD=yCONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=yCONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not setCONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not setCONFIG_BLK_DEV_RBD=y
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=yCONFIG_AD525X_DPOT=yCONFIG_AD525X_DPOT_I2C=yCONFIG_AD525X_DPOT_SPI=yCONFIG_IBM_ASM=yCONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not setCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=yCONFIG_TIFM_7XX1=yCONFIG_ICS932S401=yCONFIG_ENCLOSURE_SERVICES=yCONFIG_HP_ILO=yCONFIG_APDS9802ALS=yCONFIG_ISL29003=yCONFIG_ISL29020=yCONFIG_SENSORS_TSL2550=yCONFIG_SENSORS_BH1780=yCONFIG_SENSORS_BH1770=yCONFIG_SENSORS_APDS990X=yCONFIG_HMC6352=yCONFIG_DS1682=yCONFIG_TI_DAC7512=yCONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not setCONFIG_PCH_PHUB=y
# CONFIG_USB_SWITCH_FSA9480 is not setCONFIG_C2PORT=yCONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_AT25=yCONFIG_EEPROM_LEGACY=yCONFIG_EEPROM_MAX6875=yCONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not setCONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_IWMC3200TOP=y
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not setCONFIG_HAVE_IDE=yCONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #CONFIG_IDE_XFER_MODE=yCONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not setCONFIG_IDE_GD=yCONFIG_IDE_GD_ATA=yCONFIG_IDE_GD_ATAPI=y
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_DELKIN=yCONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPNP=yCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not setCONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not setCONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=yCONFIG_BLK_DEV_IT8172=yCONFIG_BLK_DEV_IT8213=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not setCONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_VIA82CXXX is not setCONFIG_BLK_DEV_TC86C001=yCONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_ENCLOSURE=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=yCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_ISCSI_BOOT_SYSFS=yCONFIG_SCSI_CXGB3_ISCSI=yCONFIG_SCSI_CXGB4_ISCSI=yCONFIG_SCSI_BNX2_ISCSI=y
# CONFIG_SCSI_BNX2X_FCOE is not setCONFIG_BE2ISCSI=yCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_HPSA=yCONFIG_SCSI_3W_9XXX=yCONFIG_SCSI_3W_SAS=yCONFIG_SCSI_ACARD=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_RESET_DELAY_MS=15000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not setCONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not setCONFIG_SCSI_DPT_I2O=yCONFIG_SCSI_ADVANSYS=yCONFIG_SCSI_ARCMSR=yCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=yCONFIG_MEGARAID_MAILBOX=yCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=yCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_UFSHCD is not setCONFIG_SCSI_HPTIOP=yCONFIG_SCSI_BUSLOGIC=yCONFIG_VMWARE_PVSCSI=yCONFIG_LIBFC=yCONFIG_LIBFCOE=yCONFIG_FCOE=yCONFIG_FCOE_FNIC=yCONFIG_SCSI_DMX3191D=yCONFIG_SCSI_EATA=yCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=yCONFIG_SCSI_GDTH=y
# CONFIG_SCSI_ISCI is not setCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=yCONFIG_SCSI_INIA100=yCONFIG_SCSI_PPA=yCONFIG_SCSI_IMM=y
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_STEX=yCONFIG_SCSI_SYM53C8XX_2=yCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not setCONFIG_SCSI_QLOGIC_1280=yCONFIG_SCSI_QLA_FC=yCONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_DEBUG=yCONFIG_SCSI_PMCRAID=yCONFIG_SCSI_PM8001=yCONFIG_SCSI_SRP=yCONFIG_SCSI_BFA_FC=yCONFIG_SCSI_VIRTIO=yCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=mCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_DH_ALUA=yCONFIG_SCSI_OSD_INITIATOR=yCONFIG_SCSI_OSD_ULD=yCONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not setCONFIG_SATA_INIC162X=y
# CONFIG_SATA_ACARD_AHCI is not setCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=yCONFIG_SATA_SX4=yCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_SATA_PROMISE=yCONFIG_SATA_SIL=yCONFIG_SATA_SIS=yCONFIG_SATA_SVW=yCONFIG_SATA_ULI=yCONFIG_SATA_VIA=yCONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=yCONFIG_PATA_AMD=y
# CONFIG_PATA_ARASAN_CF is not setCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=yCONFIG_PATA_ATP867X=yCONFIG_PATA_CMD64X=yCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not setCONFIG_PATA_IT821X=yCONFIG_PATA_JMICRON=yCONFIG_PATA_MARVELL=yCONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not setCONFIG_PATA_NS87415=yCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PDC2027X=yCONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not setCONFIG_PATA_RDC=yCONFIG_PATA_SC1200=yCONFIG_PATA_SCH=yCONFIG_PATA_SERVERWORKS=yCONFIG_PATA_SIL680=yCONFIG_PATA_SIS=yCONFIG_PATA_TOSHIBA=yCONFIG_PATA_TRIFLEX=yCONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not setCONFIG_PATA_MPIIX=yCONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not setCONFIG_PATA_PCMCIA=yCONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not setCONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=yCONFIG_MD_RAID0=yCONFIG_MD_RAID1=yCONFIG_MD_RAID10=yCONFIG_MD_RAID456=y
# CONFIG_MULTICORE_RAID456 is not setCONFIG_MD_MULTIPATH=yCONFIG_MD_FAULTY=yCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=yCONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not setCONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not setCONFIG_DM_LOG_USERSPACE=yCONFIG_DM_ZERO=yCONFIG_DM_MULTIPATH=yCONFIG_DM_MULTIPATH_QL=yCONFIG_DM_MULTIPATH_ST=yCONFIG_DM_DELAY=yCONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=yCONFIG_FUSION_FC=yCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=yCONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_SBP2=yCONFIG_FIREWIRE_NET=yCONFIG_FIREWIRE_NOSY=yCONFIG_I2O=yCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=yCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=yCONFIG_I2O_BLOCK=yCONFIG_I2O_SCSI=yCONFIG_I2O_PROC=yCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_NET_CORE=yCONFIG_BONDING=yCONFIG_DUMMY=yCONFIG_EQUALIZER=yCONFIG_NET_FC=yCONFIG_MII=yCONFIG_IEEE802154_DRIVERS=yCONFIG_IEEE802154_FAKEHARD=yCONFIG_IFB=y
# CONFIG_NET_TEAM is not setCONFIG_MACVLAN=yCONFIG_MACVTAP=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=yCONFIG_TUN=yCONFIG_VETH=yCONFIG_VIRTIO_NET=yCONFIG_ARCNET=yCONFIG_ARCNET_1201=yCONFIG_ARCNET_1051=yCONFIG_ARCNET_RAW=yCONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=yCONFIG_ARCNET_RIM_I=yCONFIG_ARCNET_COM20020=yCONFIG_ARCNET_COM20020_PCI=y
# CONFIG_ARCNET_COM20020_CS is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=yCONFIG_ATM_TCP=yCONFIG_ATM_LANAI=yCONFIG_ATM_ENI=y
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=yCONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=yCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=y
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=y
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=yCONFIG_ATM_HE_USE_SUNI=yCONFIG_ATM_SOLOS=y
#
# CAIF transport drivers
#CONFIG_ETHERNET=yCONFIG_MDIO=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not setCONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not setCONFIG_NET_VENDOR_ALTEON=yCONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not setCONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not setCONFIG_ATL1=yCONFIG_ATL1E=yCONFIG_ATL1C=yCONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not setCONFIG_BNX2=yCONFIG_CNIC=yCONFIG_TIGON3=yCONFIG_BNX2X=yCONFIG_NET_VENDOR_BROCADE=yCONFIG_BNA=y
# CONFIG_NET_CALXEDA_XGMAC is not setCONFIG_NET_VENDOR_CHELSIO=yCONFIG_CHELSIO_T1=yCONFIG_CHELSIO_T1_1G=yCONFIG_CHELSIO_T3=yCONFIG_CHELSIO_T4=yCONFIG_CHELSIO_T4VF=yCONFIG_NET_VENDOR_CISCO=yCONFIG_ENIC=y
# CONFIG_DNET is not setCONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not setCONFIG_NET_VENDOR_DLINK=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not setCONFIG_DL2K=y
# CONFIG_SUNDANCE is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=yCONFIG_NET_VENDOR_EXAR=yCONFIG_S2IO=yCONFIG_VXGE=y
# CONFIG_VXGE_DEBUG_TRACE_ALL is not setCONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not setCONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not setCONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not setCONFIG_E1000=yCONFIG_E1000E=yCONFIG_IGB=yCONFIG_IGB_DCA=yCONFIG_IGBVF=yCONFIG_IXGB=yCONFIG_IXGBE=yCONFIG_IXGBE_HWMON=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=yCONFIG_IXGBEVF=yCONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not setCONFIG_IP1000=yCONFIG_JME=yCONFIG_NET_VENDOR_MARVELL=yCONFIG_SKGE=yCONFIG_SKGE_DEBUG=y
# CONFIG_SKGE_GENESIS is not setCONFIG_SKY2=yCONFIG_SKY2_DEBUG=yCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=yCONFIG_MLX4_EN_DCB=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=yCONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not setCONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not setCONFIG_NET_VENDOR_MYRI=yCONFIG_MYRI10GE=yCONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not setCONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not setCONFIG_NS83820=yCONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not setCONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not setCONFIG_NET_VENDOR_OKI=yCONFIG_PCH_GBE=y
# CONFIG_ETHOC is not setCONFIG_NET_PACKET_ENGINE=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=yCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=yCONFIG_QLCNIC=yCONFIG_QLGE=yCONFIG_NETXEN_NIC=yCONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not setCONFIG_R8169=yCONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not setCONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not setCONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not setCONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not setCONFIG_SIS190=yCONFIG_SFC=yCONFIG_SFC_MTD=yCONFIG_SFC_MCDI_MON=yCONFIG_SFC_SRIOV=yCONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not setCONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not setCONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not setCONFIG_NIU=yCONFIG_NET_VENDOR_TEHUTI=yCONFIG_TEHUTI=yCONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not setCONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not setCONFIG_VIA_VELOCITY=yCONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not setCONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not setCONFIG_FDDI=yCONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not setCONFIG_SKFP=yCONFIG_HIPPI=yCONFIG_ROADRUNNER=y
# CONFIG_ROADRUNNER_LARGE_RINGS is not setCONFIG_NET_SB1000=yCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not setCONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=yCONFIG_NATIONAL_PHY=yCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=yCONFIG_MICREL_PHY=y
# CONFIG_FIXED_PHY is not setCONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
# CONFIG_MICREL_KS8995MA is not setCONFIG_PLIP=yCONFIG_PPP=yCONFIG_PPP_BSDCOMP=yCONFIG_PPP_DEFLATE=yCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=yCONFIG_PPP_MULTILINK=yCONFIG_PPPOATM=yCONFIG_PPPOE=yCONFIG_PPTP=yCONFIG_PPPOL2TP=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=yCONFIG_SLIP=yCONFIG_SLHC=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#CONFIG_USB_CATC=yCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_EEM=yCONFIG_USB_NET_CDC_NCM=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC75XX=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=yCONFIG_USB_NET_PLUSB=yCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=yCONFIG_USB_NET_CX82310_ETH=y
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not setCONFIG_USB_HSO=yCONFIG_USB_NET_INT51X1=yCONFIG_USB_CDC_PHONET=yCONFIG_USB_IPHETH=yCONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not setCONFIG_WLAN=yCONFIG_PCMCIA_RAYCS=yCONFIG_LIBERTAS_THINFIRM=y
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not setCONFIG_LIBERTAS_THINFIRM_USB=yCONFIG_AIRO=yCONFIG_ATMEL=yCONFIG_PCI_ATMEL=yCONFIG_PCMCIA_ATMEL=yCONFIG_AT76C50X_USB=yCONFIG_AIRO_CS=yCONFIG_PCMCIA_WL3501=y
# CONFIG_PRISM54 is not setCONFIG_USB_ZD1201=yCONFIG_USB_NET_RNDIS_WLAN=yCONFIG_RTL8180=yCONFIG_RTL8187=yCONFIG_RTL8187_LEDS=yCONFIG_ADM8211=yCONFIG_MAC80211_HWSIM=yCONFIG_MWL8K=yCONFIG_ATH_COMMON=y
# CONFIG_ATH_DEBUG is not setCONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not setCONFIG_ATH5K_PCI=yCONFIG_ATH9K_HW=yCONFIG_ATH9K_COMMON=yCONFIG_ATH9K_BTCOEX_SUPPORT=yCONFIG_ATH9K=y
# CONFIG_ATH9K_PCI is not set
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not setCONFIG_ATH9K_RATE_CONTROL=yCONFIG_ATH9K_HTC=y
# CONFIG_ATH9K_HTC_DEBUGFS is not setCONFIG_CARL9170=yCONFIG_CARL9170_LEDS=yCONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not setCONFIG_B43=yCONFIG_B43_SSB=yCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_PCMCIA=yCONFIG_B43_SDIO=yCONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not setCONFIG_B43_PHY_LP=y
# CONFIG_B43_PHY_HT is not setCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not setCONFIG_B43LEGACY=yCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=yCONFIG_B43LEGACY_DEBUG=yCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_BRCMFMAC is not setCONFIG_HOSTAP=yCONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not setCONFIG_HOSTAP_PLX=yCONFIG_HOSTAP_PCI=yCONFIG_HOSTAP_CS=y
# CONFIG_IPW2100 is not setCONFIG_IPW2200=yCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLWIFI is not setCONFIG_IWLEGACY=y
# CONFIG_IWL4965 is not setCONFIG_IWL3945=y
#
# iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set CONFIG_IWM=y # CONFIG_IWM_DEBUG is not set # CONFIG_IWM_TRACING is not set CONFIG_LIBERTAS=y CONFIG_LIBERTAS_USB=y CONFIG_LIBERTAS_CS=y CONFIG_LIBERTAS_SDIO=y CONFIG_LIBERTAS_SPI=y # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y CONFIG_HERMES=y # CONFIG_HERMES_PRISM is not set CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=y CONFIG_TMD_HERMES=y CONFIG_NORTEL_HERMES=y CONFIG_PCMCIA_HERMES=y CONFIG_PCMCIA_SPECTRUM=y CONFIG_ORINOCO_USB=y CONFIG_P54_COMMON=y CONFIG_P54_USB=y CONFIG_P54_PCI=y CONFIG_P54_SPI=y # CONFIG_P54_SPI_DEFAULT_EEPROM is not set CONFIG_P54_LEDS=y CONFIG_RT2X00=y CONFIG_RT2400PCI=y CONFIG_RT2500PCI=y CONFIG_RT61PCI=y CONFIG_RT2800PCI=y CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2500USB=y CONFIG_RT73USB=y CONFIG_RT2800USB=y CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y # CONFIG_RT2800USB_RT53XX is not set # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=y CONFIG_RT2X00_LIB_PCI=y CONFIG_RT2X00_LIB_USB=y CONFIG_RT2X00_LIB=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set # CONFIG_RTL8192CE is not set # CONFIG_RTL8192SE is not set # CONFIG_RTL8192DE is not set # CONFIG_RTL8192CU is not set # CONFIG_WL_TI is not set CONFIG_ZD1211RW=y # CONFIG_ZD1211RW_DEBUG is not set # CONFIG_MWIFIEX is not set
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=yCONFIG_WIMAX_I2400M_USB=yCONFIG_WIMAX_I2400M_SDIO=yCONFIG_WIMAX_IWMC3200_SDIO=yCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8CONFIG_WAN=yCONFIG_LANMEDIA=yCONFIG_HDLC=yCONFIG_HDLC_RAW=yCONFIG_HDLC_RAW_ETH=yCONFIG_HDLC_CISCO=yCONFIG_HDLC_FR=yCONFIG_HDLC_PPP=y
# CONFIG_HDLC_X25 is not setCONFIG_PCI200SYN=yCONFIG_WANXL=y
# CONFIG_PC300TOO is not setCONFIG_FARSYNC=yCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_DLCI=yCONFIG_DLCI_MAX=8CONFIG_WAN_ROUTER_DRIVERS=yCONFIG_CYCLADES_SYNC=y
# CONFIG_CYCLOMX_X25 is not setCONFIG_SBNI=y
# CONFIG_SBNI_MULTILINE is not setCONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETDEV_BACKEND is not setCONFIG_VMXNET3=yCONFIG_ISDN=y
# CONFIG_ISDN_I4L is not setCONFIG_ISDN_CAPI=yCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=y
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=yCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=yCONFIG_ISDN_DRV_AVMB1_AVM_CS=yCONFIG_ISDN_DRV_AVMB1_T1PCI=yCONFIG_ISDN_DRV_AVMB1_C4=y
# CONFIG_CAPI_EICON is not setCONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DUMMYLL is not setCONFIG_GIGASET_BASE=yCONFIG_GIGASET_M105=yCONFIG_GIGASET_M101=y
# CONFIG_GIGASET_DEBUG is not setCONFIG_HYSDN=mCONFIG_HYSDN_CAPI=yCONFIG_MISDN=yCONFIG_MISDN_DSP=yCONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=yCONFIG_MISDN_HFCMULTI=yCONFIG_MISDN_HFCUSB=yCONFIG_MISDN_AVMFRITZ=yCONFIG_MISDN_SPEEDFAX=yCONFIG_MISDN_INFINEON=yCONFIG_MISDN_W6692=y
# CONFIG_MISDN_NETJET is not setCONFIG_MISDN_IPAC=yCONFIG_MISDN_ISAR=y
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not setCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not setCONFIG_KEYBOARD_QT2160=yCONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not setCONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not setCONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not setCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_OPENCORES=yCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_OMAP4 is not setCONFIG_KEYBOARD_XTKBD=yCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=yCONFIG_MOUSE_APPLETOUCH=yCONFIG_MOUSE_BCM5974=yCONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not setCONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=yCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=yCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=yCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_DB9=yCONFIG_JOYSTICK_GAMECON=yCONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_AS5011 is not setCONFIG_JOYSTICK_JOYDUMP=yCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_JOYSTICK_WALKERA0701=yCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_HANWANG=yCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=yCONFIG_TOUCHSCREEN_AD7877=yCONFIG_TOUCHSCREEN_AD7879=yCONFIG_TOUCHSCREEN_AD7879_I2C=y
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not setCONFIG_TOUCHSCREEN_DYNAPRO=yCONFIG_TOUCHSCREEN_HAMPSHIRE=yCONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX is not setCONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_ILI210X is not setCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not setCONFIG_TOUCHSCREEN_MCS5000=yCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=yCONFIG_TOUCHSCREEN_MK712=yCONFIG_TOUCHSCREEN_PENMOUNT=yCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_PIXCIR is not setCONFIG_TOUCHSCREEN_WM97XX=yCONFIG_TOUCHSCREEN_WM9705=yCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=yCONFIG_TOUCHSCREEN_USB_ETT_TC45USB=yCONFIG_TOUCHSCREEN_USB_NEXIO=yCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not setCONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_ST1232 is not setCONFIG_TOUCHSCREEN_TPS6507X=yCONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not setCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not setCONFIG_INPUT_APANEL=y
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not setCONFIG_INPUT_ATLAS_BTNS=yCONFIG_INPUT_ATI_REMOTE2=yCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not setCONFIG_INPUT_POWERMATE=yCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF50633_PMU=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not setCONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not setCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=yCONFIG_GAMEPORT_EMU10K1=yCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_ROCKETPORT=yCONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not setCONFIG_MOXA_INTELLIO=yCONFIG_MOXA_SMARTIO=yCONFIG_SYNCLINK=yCONFIG_SYNCLINKMP=yCONFIG_SYNCLINK_GT=yCONFIG_NOZOMI=yCONFIG_ISI=yCONFIG_N_HDLC=yCONFIG_N_GSM=y
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=yCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX3107 is not setCONFIG_SERIAL_MFD_HSU=y
# CONFIG_SERIAL_MFD_HSU_CONSOLE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not setCONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=yCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=yCONFIG_IPMI_WATCHDOG=yCONFIG_IPMI_POWEROFF=yCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_VIA=yCONFIG_HW_RANDOM_VIRTIO=yCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=y
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=yCONFIG_CARDMAN_4000=yCONFIG_CARDMAN_4040=yCONFIG_IPWIRELESS=yCONFIG_MWAVE=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=yCONFIG_TCG_TIS=yCONFIG_TCG_NSC=yCONFIG_TCG_ATMEL=yCONFIG_TCG_INFINEON=yCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not setCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD756_S4882=yCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=yCONFIG_I2C_NFORCE2=yCONFIG_I2C_NFORCE2_S4985=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set CONFIG_I2C_OCORES=yCONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not setCONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not setCONFIG_SPI_BITBANG=yCONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_GPIO is not setCONFIG_SPI_LM70_LLP=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not setCONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=y
# CONFIG_HSI is not set
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_LANGWELL is not setCONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#CONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not setCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not setCONFIG_W1_SLAVE_BQ27000=yCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=y
# CONFIG_TEST_POWER is not setCONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not setCONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_WM97XX is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=yCONFIG_BATTERY_BQ27X00_I2C=yCONFIG_BATTERY_BQ27X00_PLATFORM=yCONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not setCONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_SMB347 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=yCONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not setCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADCXX=yCONFIG_SENSORS_ADM1021=yCONFIG_SENSORS_ADM1025=yCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=yCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7411=yCONFIG_SENSORS_ADT7462=yCONFIG_SENSORS_ADT7470=yCONFIG_SENSORS_ADT7475=yCONFIG_SENSORS_ASC7621=yCONFIG_SENSORS_K8TEMP=yCONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_FAM15H_POWER is not setCONFIG_SENSORS_ASB100=yCONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not setCONFIG_SENSORS_DS1621=yCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=yCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_F75375S=yCONFIG_SENSORS_FSCHMD=yCONFIG_SENSORS_G760A=yCONFIG_SENSORS_GL518SM=yCONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_GPIO_FAN is not setCONFIG_SENSORS_CORETEMP=yCONFIG_SENSORS_IBMAEM=yCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not setCONFIG_SENSORS_LM63=yCONFIG_SENSORS_LM70=yCONFIG_SENSORS_LM73=yCONFIG_SENSORS_LM75=yCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=yCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=yCONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LTC4151 is not setCONFIG_SENSORS_LTC4215=yCONFIG_SENSORS_LTC4245=yCONFIG_SENSORS_LTC4261=yCONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not setCONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not setCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not setCONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not setCONFIG_SENSORS_PC87360=yCONFIG_SENSORS_PC87427=yCONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not setCONFIG_SENSORS_SIS5595=yCONFIG_SENSORS_SMM665=yCONFIG_SENSORS_DME1737=yCONFIG_SENSORS_EMC1403=yCONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not setCONFIG_SENSORS_SMSC47M1=yCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not setCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_ADS7871=yCONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA2XX is not setCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_TMP102=yCONFIG_SENSORS_TMP401=yCONFIG_SENSORS_TMP421=yCONFIG_SENSORS_VIA_CPUTEMP=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=yCONFIG_SENSORS_VT8231=yCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=yCONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=yCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=yCONFIG_SENSORS_APPLESMC=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not setCONFIG_SENSORS_ATK0110=yCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=yCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=yCONFIG_ALIM1535_WDT=yCONFIG_ALIM7101_WDT=yCONFIG_F71808E_WDT=y
# CONFIG_SP5100_TCO is not setCONFIG_SC520_WDT=yCONFIG_SBC_FITPC2_WATCHDOG=yCONFIG_EUROTECH_WDT=yCONFIG_IB700_WDT=yCONFIG_IBMASR=yCONFIG_WAFER_WDT=yCONFIG_I6300ESB_WDT=y
# CONFIG_IE6XX_WDT is not setCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=yCONFIG_IT87_WDT=yCONFIG_HP_WATCHDOG=yCONFIG_HPWDT_NMI_DECODING=yCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=y
# CONFIG_NV_TCO is not setCONFIG_60XX_WDT=yCONFIG_SBC8360_WDT=yCONFIG_CPU5_WDT=yCONFIG_SMSC_SCH311X_WDT=yCONFIG_SMSC37B787_WDT=y
# CONFIG_VIA_WDT is not setCONFIG_W83627HF_WDT=yCONFIG_W83697HF_WDT=yCONFIG_W83697UG_WDT=yCONFIG_W83877F_WDT=yCONFIG_W83977F_WDT=yCONFIG_MACHZ_WDT=yCONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=yCONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_BLOCKIO=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=yCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not setCONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not setCONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not setCONFIG_TPS65010=y
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not setCONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not setCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=yCONFIG_PCF50633_GPIO=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not setCONFIG_LPC_SCH=yCONFIG_LPC_ICH=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_PALMAS is not setCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not setCONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not setCONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ISL6271A is not setCONFIG_REGULATOR_MAX1586=yCONFIG_REGULATOR_MAX8649=yCONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not setCONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not setCONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_TPS62360 is not setCONFIG_REGULATOR_TPS65023=yCONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not setCONFIG_REGULATOR_WM8400=yCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not setCONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=yCONFIG_DVB_CORE=yCONFIG_DVB_NET=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=yCONFIG_VIDEO_SAA7146_VV=yCONFIG_RC_CORE=yCONFIG_LIRC=yCONFIG_RC_MAP=yCONFIG_IR_NEC_DECODER=yCONFIG_IR_RC5_DECODER=yCONFIG_IR_RC6_DECODER=yCONFIG_IR_JVC_DECODER=yCONFIG_IR_SONY_DECODER=yCONFIG_IR_RC5_SZ_DECODER=yCONFIG_IR_SANYO_DECODER=yCONFIG_IR_MCE_KBD_DECODER=yCONFIG_IR_LIRC_CODEC=y
# CONFIG_RC_ATI_REMOTE is not setCONFIG_IR_ENE=yCONFIG_IR_IMON=yCONFIG_IR_MCEUSB=y
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not setCONFIG_IR_NUVOTON=y
# CONFIG_IR_REDRAT3 is not setCONFIG_IR_STREAMZAP=y
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not setCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not setCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=yCONFIG_MEDIA_TUNER_MT20XX=yCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2266=yCONFIG_MEDIA_TUNER_MT2131=yCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_XC4000=yCONFIG_MEDIA_TUNER_MXL5005S=yCONFIG_MEDIA_TUNER_MXL5007T=yCONFIG_MEDIA_TUNER_MC44S803=yCONFIG_MEDIA_TUNER_MAX2165=yCONFIG_MEDIA_TUNER_TDA18218=yCONFIG_MEDIA_TUNER_TDA18212=yCONFIG_VIDEO_V4L2=yCONFIG_VIDEOBUF_GEN=yCONFIG_VIDEOBUF_DMA_SG=yCONFIG_VIDEOBUF_VMALLOC=yCONFIG_VIDEOBUF_DVB=yCONFIG_VIDEO_BTCX=yCONFIG_VIDEO_TVEEPROM=yCONFIG_VIDEO_TUNER=yCONFIG_VIDEOBUF2_CORE=yCONFIG_VIDEOBUF2_MEMOPS=yCONFIG_VIDEOBUF2_VMALLOC=yCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#CONFIG_VIDEO_TVAUDIO=yCONFIG_VIDEO_TDA7432=yCONFIG_VIDEO_TDA9840=yCONFIG_VIDEO_TEA6415C=yCONFIG_VIDEO_TEA6420=yCONFIG_VIDEO_MSP3400=yCONFIG_VIDEO_CS5345=yCONFIG_VIDEO_CS53L32A=yCONFIG_VIDEO_WM8775=yCONFIG_VIDEO_WM8739=yCONFIG_VIDEO_VP27SMPX=y
#
# RDS decoders
#CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#CONFIG_VIDEO_BT819=yCONFIG_VIDEO_BT856=yCONFIG_VIDEO_BT866=yCONFIG_VIDEO_KS0127=yCONFIG_VIDEO_SAA7110=yCONFIG_VIDEO_SAA711X=yCONFIG_VIDEO_TVP5150=yCONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=yCONFIG_VIDEO_CX25840=y
#
# MPEG video encoders
#CONFIG_VIDEO_CX2341X=y
#
# Video encoders
#CONFIG_VIDEO_SAA7127=yCONFIG_VIDEO_SAA7185=yCONFIG_VIDEO_ADV7170=yCONFIG_VIDEO_ADV7175=y
#
# Camera sensor devices
#CONFIG_VIDEO_MT9V011=y
#
# Flash devices
#
#
# Video improvement chips
#CONFIG_VIDEO_UPD64031A=yCONFIG_VIDEO_UPD64083=y
#
# Miscelaneous helper chips
#CONFIG_VIDEO_M52790=yCONFIG_VIDEO_VIVI=yCONFIG_V4L_USB_DRIVERS=yCONFIG_VIDEO_AU0828=yCONFIG_USB_VIDEO_CLASS=yCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=yCONFIG_USB_M5602=yCONFIG_USB_STV06XX=yCONFIG_USB_GL860=yCONFIG_USB_GSPCA_BENQ=yCONFIG_USB_GSPCA_CONEX=yCONFIG_USB_GSPCA_CPIA1=yCONFIG_USB_GSPCA_ETOMS=yCONFIG_USB_GSPCA_FINEPIX=yCONFIG_USB_GSPCA_JEILINJ=y
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not setCONFIG_USB_GSPCA_KONICA=yCONFIG_USB_GSPCA_MARS=yCONFIG_USB_GSPCA_MR97310A=y
# CONFIG_USB_GSPCA_NW80X is not setCONFIG_USB_GSPCA_OV519=yCONFIG_USB_GSPCA_OV534=yCONFIG_USB_GSPCA_OV534_9=yCONFIG_USB_GSPCA_PAC207=yCONFIG_USB_GSPCA_PAC7302=yCONFIG_USB_GSPCA_PAC7311=y
# CONFIG_USB_GSPCA_SE401 is not setCONFIG_USB_GSPCA_SN9C2028=yCONFIG_USB_GSPCA_SN9C20X=yCONFIG_USB_GSPCA_SONIXB=yCONFIG_USB_GSPCA_SONIXJ=yCONFIG_USB_GSPCA_SPCA500=yCONFIG_USB_GSPCA_SPCA501=yCONFIG_USB_GSPCA_SPCA505=yCONFIG_USB_GSPCA_SPCA506=yCONFIG_USB_GSPCA_SPCA508=yCONFIG_USB_GSPCA_SPCA561=yCONFIG_USB_GSPCA_SPCA1528=yCONFIG_USB_GSPCA_SQ905=yCONFIG_USB_GSPCA_SQ905C=yCONFIG_USB_GSPCA_SQ930X=yCONFIG_USB_GSPCA_STK014=yCONFIG_USB_GSPCA_STV0680=yCONFIG_USB_GSPCA_SUNPLUS=yCONFIG_USB_GSPCA_T613=y
# CONFIG_USB_GSPCA_TOPRO is not setCONFIG_USB_GSPCA_TV8532=yCONFIG_USB_GSPCA_VC032X=y
# CONFIG_USB_GSPCA_VICAM is not setCONFIG_USB_GSPCA_XIRLINK_CIT=yCONFIG_USB_GSPCA_ZC3XX=yCONFIG_VIDEO_PVRUSB2=yCONFIG_VIDEO_PVRUSB2_SYSFS=yCONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_HDPVR=yCONFIG_VIDEO_EM28XX=yCONFIG_VIDEO_EM28XX_ALSA=yCONFIG_VIDEO_EM28XX_DVB=yCONFIG_VIDEO_EM28XX_RC=yCONFIG_VIDEO_TLG2300=yCONFIG_VIDEO_CX231XX=yCONFIG_VIDEO_CX231XX_RC=yCONFIG_VIDEO_CX231XX_ALSA=yCONFIG_VIDEO_CX231XX_DVB=y
# CONFIG_VIDEO_TM6000 is not setCONFIG_VIDEO_USBVISION=yCONFIG_USB_SN9C102=yCONFIG_USB_PWC=y
# CONFIG_USB_PWC_DEBUG is not setCONFIG_USB_PWC_INPUT_EVDEV=yCONFIG_VIDEO_CPIA2=yCONFIG_USB_ZR364XX=yCONFIG_USB_STKWEBCAM=yCONFIG_USB_S2255=yCONFIG_V4L_PCI_DRIVERS=yCONFIG_VIDEO_BT848=yCONFIG_VIDEO_BT848_DVB=yCONFIG_VIDEO_CX18=yCONFIG_VIDEO_CX18_ALSA=yCONFIG_VIDEO_CX23885=y
# CONFIG_MEDIA_ALTERA_CI is not set
# CONFIG_VIDEO_CX25821 is not setCONFIG_VIDEO_CX88=yCONFIG_VIDEO_CX88_ALSA=yCONFIG_VIDEO_CX88_BLACKBIRD=yCONFIG_VIDEO_CX88_DVB=yCONFIG_VIDEO_CX88_VP3054=yCONFIG_VIDEO_CX88_MPEG=yCONFIG_VIDEO_HEXIUM_GEMINI=yCONFIG_VIDEO_HEXIUM_ORION=yCONFIG_VIDEO_IVTV=yCONFIG_VIDEO_FB_IVTV=yCONFIG_VIDEO_MEYE=yCONFIG_VIDEO_MXB=yCONFIG_VIDEO_SAA7134=yCONFIG_VIDEO_SAA7134_ALSA=yCONFIG_VIDEO_SAA7134_RC=yCONFIG_VIDEO_SAA7134_DVB=yCONFIG_VIDEO_SAA7164=yCONFIG_VIDEO_ZORAN=yCONFIG_VIDEO_ZORAN_DC30=yCONFIG_VIDEO_ZORAN_ZR36060=yCONFIG_VIDEO_ZORAN_BUZ=yCONFIG_VIDEO_ZORAN_DC10=yCONFIG_VIDEO_ZORAN_LML33=yCONFIG_VIDEO_ZORAN_LML33R10=yCONFIG_VIDEO_ZORAN_AVS6EYES=y
# CONFIG_V4L_ISA_PARPORT_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not setCONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not setCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_SI470X=yCONFIG_USB_SI470X=yCONFIG_USB_MR800=yCONFIG_USB_DSBR=yCONFIG_RADIO_MAXIRADIO=yCONFIG_I2C_SI4713=yCONFIG_RADIO_SI4713=y
# CONFIG_USB_KEENE is not setCONFIG_RADIO_TEA5764=yCONFIG_RADIO_TEA5764_XTAL=yCONFIG_RADIO_SAA7706H=yCONFIG_RADIO_TEF6862=y
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not setCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=yCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=yCONFIG_DVB_AV7110=yCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=yCONFIG_DVB_BUDGET=yCONFIG_DVB_BUDGET_CI=yCONFIG_DVB_BUDGET_AV=yCONFIG_DVB_BUDGET_PATCH=y
#
# Supported USB Adapters
#CONFIG_DVB_USB=y
# CONFIG_DVB_USB_DEBUG is not setCONFIG_DVB_USB_A800=yCONFIG_DVB_USB_DIBUSB_MB=yCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=yCONFIG_DVB_USB_DIB0700=yCONFIG_DVB_USB_UMT_010=yCONFIG_DVB_USB_CXUSB=yCONFIG_DVB_USB_M920X=yCONFIG_DVB_USB_GL861=yCONFIG_DVB_USB_AU6610=yCONFIG_DVB_USB_DIGITV=yCONFIG_DVB_USB_VP7045=yCONFIG_DVB_USB_VP702X=yCONFIG_DVB_USB_GP8PSK=yCONFIG_DVB_USB_NOVA_T_USB2=yCONFIG_DVB_USB_TTUSB2=yCONFIG_DVB_USB_DTT200U=yCONFIG_DVB_USB_OPERA1=yCONFIG_DVB_USB_AF9005=yCONFIG_DVB_USB_AF9005_REMOTE=y
# CONFIG_DVB_USB_PCTV452E is not setCONFIG_DVB_USB_DW2102=yCONFIG_DVB_USB_CINERGY_T2=yCONFIG_DVB_USB_ANYSEE=yCONFIG_DVB_USB_DTV5100=yCONFIG_DVB_USB_AF9015=yCONFIG_DVB_USB_CE6230=yCONFIG_DVB_USB_FRIIO=yCONFIG_DVB_USB_EC168=y
# CONFIG_DVB_USB_AZ6007 is not setCONFIG_DVB_USB_AZ6027=yCONFIG_DVB_USB_LME2510=y
# CONFIG_DVB_USB_TECHNISAT_USB2 is not set
# CONFIG_DVB_USB_IT913X is not set
# CONFIG_DVB_USB_MXL111SF is not set
# CONFIG_DVB_USB_RTL28XXU is not set
# CONFIG_DVB_USB_AF9035 is not setCONFIG_DVB_TTUSB_BUDGET=yCONFIG_DVB_TTUSB_DEC=yCONFIG_SMS_SIANO_MDTV=y
#
# Siano module components
#CONFIG_SMS_USB_DRV=yCONFIG_SMS_SDIO_DRV=y
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=yCONFIG_DVB_B2C2_FLEXCOP_PCI=yCONFIG_DVB_B2C2_FLEXCOP_USB=y
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#CONFIG_DVB_BT8XX=y
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=y
#
# Supported SDMC DM1105 Adapters
#CONFIG_DVB_DM1105=y
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=yCONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#CONFIG_DVB_PT1=y
#
# Supported Mantis Adapters
#CONFIG_MANTIS_CORE=yCONFIG_DVB_MANTIS=yCONFIG_DVB_HOPPER=y
#
# Supported nGene Adapters
#CONFIG_DVB_NGENE=y
#
# Supported ddbridge ('Octopus') Adapters
#
# CONFIG_DVB_DDBRIDGE is not set
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=yCONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=yCONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=yCONFIG_DVB_CX24123=yCONFIG_DVB_MT312=yCONFIG_DVB_ZL10036=yCONFIG_DVB_ZL10039=yCONFIG_DVB_S5H1420=yCONFIG_DVB_STV0288=yCONFIG_DVB_STB6000=yCONFIG_DVB_STV0299=yCONFIG_DVB_STV6110=yCONFIG_DVB_STV0900=yCONFIG_DVB_TDA8083=yCONFIG_DVB_TDA10086=yCONFIG_DVB_TDA8261=yCONFIG_DVB_VES1X93=yCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TDA826X=yCONFIG_DVB_TUA6100=yCONFIG_DVB_CX24116=yCONFIG_DVB_SI21XX=yCONFIG_DVB_DS3000=yCONFIG_DVB_MB86A16=yCONFIG_DVB_TDA10071=y
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=yCONFIG_DVB_SP887X=yCONFIG_DVB_CX22700=yCONFIG_DVB_CX22702=yCONFIG_DVB_DRXD=yCONFIG_DVB_L64781=yCONFIG_DVB_TDA1004X=yCONFIG_DVB_NXT6000=yCONFIG_DVB_MT352=yCONFIG_DVB_ZL10353=yCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=yCONFIG_DVB_TDA10048=yCONFIG_DVB_AF9013=yCONFIG_DVB_EC100=yCONFIG_DVB_STV0367=yCONFIG_DVB_CXD2820R=y
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=yCONFIG_DVB_TDA10021=yCONFIG_DVB_TDA10023=yCONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=yCONFIG_DVB_OR51211=yCONFIG_DVB_OR51132=yCONFIG_DVB_BCM3510=yCONFIG_DVB_LGDT330X=yCONFIG_DVB_LGDT3305=yCONFIG_DVB_S5H1409=yCONFIG_DVB_AU8522=yCONFIG_DVB_AU8522_DTV=yCONFIG_DVB_AU8522_V4L=yCONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=yCONFIG_DVB_DIB8000=yCONFIG_DVB_MB86A20S=y
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=yCONFIG_DVB_TUNER_DIB0070=yCONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=yCONFIG_DVB_ISL6405=yCONFIG_DVB_ISL6421=yCONFIG_DVB_ISL6423=yCONFIG_DVB_A8293=yCONFIG_DVB_LGS8GXX=yCONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=yCONFIG_DVB_IX2505V=yCONFIG_DVB_M88RS2000=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=yCONFIG_AGP_VIA=yCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=16CONFIG_VGA_SWITCHEROO=yCONFIG_DRM=yCONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not setCONFIG_DRM_TTM=yCONFIG_DRM_TDFX=yCONFIG_DRM_R128=yCONFIG_DRM_RADEON=yCONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I810 is not setCONFIG_DRM_I915=yCONFIG_DRM_I915_KMS=yCONFIG_DRM_MGA=yCONFIG_DRM_SIS=yCONFIG_DRM_VIA=yCONFIG_DRM_SAVAGE=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_STUB_POULSBO is not setCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not setCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not setCONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=yCONFIG_FB_CYBER2000_DDC=yCONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=yCONFIG_FB_UVESA=yCONFIG_FB_VESA=yCONFIG_FB_EFI=yCONFIG_FB_N411=yCONFIG_FB_HGA=yCONFIG_FB_S1D13XXX=yCONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not setCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=yCONFIG_FB_MATROX=yCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=yCONFIG_FB_MATROX_MAVEN=yCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=yCONFIG_FB_ATY128_BACKLIGHT=yCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not setCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=yCONFIG_FB_S3=yCONFIG_FB_S3_DDC=yCONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not setCONFIG_FB_SIS=yCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not setCONFIG_FB_NEOMAGIC=yCONFIG_FB_KYRO=yCONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_3DFX_I2C=yCONFIG_FB_VOODOO1=yCONFIG_FB_VT8623=yCONFIG_FB_TRIDENT=yCONFIG_FB_ARK=yCONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=y
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not setCONFIG_FB_VIRTUAL=yCONFIG_XEN_FBDEV_FRONTEND=yCONFIG_FB_METRONOME=yCONFIG_FB_MB862XX=yCONFIG_FB_MB862XX_PCI_GDC=yCONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not setCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_HWDEP=yCONFIG_SND_RAWMIDI=yCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=yCONFIG_SND_SEQ_DUMMY=yCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=yCONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not setCONFIG_SND_HRTIMER=yCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=yCONFIG_SND_KCTL_JACK=yCONFIG_SND_DMA_SGBUF=yCONFIG_SND_RAWMIDI_SEQ=yCONFIG_SND_OPL3_LIB_SEQ=y
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not setCONFIG_SND_EMU10K1_SEQ=yCONFIG_SND_MPU401_UART=yCONFIG_SND_OPL3_LIB=yCONFIG_SND_VX_LIB=yCONFIG_SND_AC97_CODEC=yCONFIG_SND_DRIVERS=yCONFIG_SND_PCSP=yCONFIG_SND_DUMMY=yCONFIG_SND_ALOOP=yCONFIG_SND_VIRMIDI=yCONFIG_SND_MTPAV=yCONFIG_SND_MTS64=yCONFIG_SND_SERIAL_U16550=yCONFIG_SND_MPU401=yCONFIG_SND_PORTMAN2X4=yCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0CONFIG_SND_SB_COMMON=yCONFIG_SND_SB16_DSP=yCONFIG_SND_TEA575X=yCONFIG_SND_PCI=yCONFIG_SND_AD1889=yCONFIG_SND_ALS300=yCONFIG_SND_ALS4000=yCONFIG_SND_ALI5451=yCONFIG_SND_ASIHPI=yCONFIG_SND_ATIIXP=yCONFIG_SND_ATIIXP_MODEM=yCONFIG_SND_AU8810=yCONFIG_SND_AU8820=yCONFIG_SND_AU8830=y
# CONFIG_SND_AW2 is not setCONFIG_SND_AZT3328=yCONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=yCONFIG_SND_CMIPCI=yCONFIG_SND_OXYGEN_LIB=yCONFIG_SND_OXYGEN=yCONFIG_SND_CS4281=yCONFIG_SND_CS46XX=yCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS5530=yCONFIG_SND_CS5535AUDIO=yCONFIG_SND_CTXFI=yCONFIG_SND_DARLA20=yCONFIG_SND_GINA20=yCONFIG_SND_LAYLA20=yCONFIG_SND_DARLA24=yCONFIG_SND_GINA24=yCONFIG_SND_LAYLA24=yCONFIG_SND_MONA=yCONFIG_SND_MIA=yCONFIG_SND_ECHO3G=yCONFIG_SND_INDIGO=yCONFIG_SND_INDIGOIO=yCONFIG_SND_INDIGODJ=yCONFIG_SND_INDIGOIOX=yCONFIG_SND_INDIGODJX=yCONFIG_SND_EMU10K1=yCONFIG_SND_EMU10K1X=yCONFIG_SND_ENS1370=yCONFIG_SND_ENS1371=yCONFIG_SND_ES1938=yCONFIG_SND_ES1968=yCONFIG_SND_ES1968_INPUT=y
# CONFIG_SND_ES1968_RADIO is not setCONFIG_SND_FM801=yCONFIG_SND_FM801_TEA575X_BOOL=yCONFIG_SND_HDA_INTEL=yCONFIG_SND_HDA_PREALLOC_SIZE=64CONFIG_SND_HDA_HWDEP=yCONFIG_SND_HDA_RECONFIG=yCONFIG_SND_HDA_INPUT_BEEP=yCONFIG_SND_HDA_INPUT_BEEP_MODE=1CONFIG_SND_HDA_INPUT_JACK=yCONFIG_SND_HDA_PATCH_LOADER=yCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_HDMI=yCONFIG_SND_HDA_CODEC_CIRRUS=yCONFIG_SND_HDA_CODEC_CONEXANT=yCONFIG_SND_HDA_CODEC_CA0110=yCONFIG_SND_HDA_CODEC_CA0132=yCONFIG_SND_HDA_CODEC_CMEDIA=yCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0CONFIG_SND_HDSP=y
#
# Don't forget to add built-in firmwares for HDSP driver #CONFIG_SND_HDSPM=yCONFIG_SND_ICE1712=yCONFIG_SND_ICE1724=yCONFIG_SND_INTEL8X0=yCONFIG_SND_INTEL8X0M=yCONFIG_SND_KORG1212=y
# CONFIG_SND_LOLA is not set CONFIG_SND_LX6464ES=yCONFIG_SND_MAESTRO3=y CONFIG_SND_MAESTRO3_INPUT=yCONFIG_SND_MIXART=yCONFIG_SND_NM256=yCONFIG_SND_PCXHR=yCONFIG_SND_RIPTIDE=yCONFIG_SND_RME32=yCONFIG_SND_RME96=yCONFIG_SND_RME9652=yCONFIG_SND_SONICVIBES=yCONFIG_SND_TRIDENT=yCONFIG_SND_VIA82XX=yCONFIG_SND_VIA82XX_MODEM=y CONFIG_SND_VIRTUOSO=yCONFIG_SND_VX222=yCONFIG_SND_YMFPCI=yCONFIG_SND_SPI=yCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=yCONFIG_SND_USB_UA101=yCONFIG_SND_USB_USX2Y=yCONFIG_SND_USB_CAIAQ=y CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_US122L=y
# CONFIG_SND_USB_6FIRE is not set CONFIG_SND_FIREWIRE=y
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set CONFIG_SND_PCMCIA=yCONFIG_SND_VXPOCKET=yCONFIG_SND_PDAUDIOCF=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=yCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
#
# Special HID drivers
#CONFIG_HID_GENERIC=yCONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not setCONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not setCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_PRODIKEYS=yCONFIG_HID_CYPRESS=yCONFIG_HID_DRAGONRISE=yCONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not setCONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not setCONFIG_HID_KYE=yCONFIG_HID_UCLOGIC=yCONFIG_HID_WALTOP=yCONFIG_HID_GYRATION=yCONFIG_HID_TWINHAN=yCONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not setCONFIG_HID_LOGITECH=yCONFIG_HID_LOGITECH_DJ=mCONFIG_LOGITECH_FF=yCONFIG_LOGIRUMBLEPAD2_FF=yCONFIG_LOGIG940_FF=yCONFIG_LOGIWHEELS_FF=yCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not setCONFIG_HID_NTRIG=yCONFIG_HID_ORTEK=yCONFIG_HID_PANTHERLORD=yCONFIG_PANTHERLORD_FF=yCONFIG_HID_PETALYNX=yCONFIG_HID_PICOLCD=yCONFIG_HID_PICOLCD_FB=yCONFIG_HID_PICOLCD_BACKLIGHT=yCONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PRIMAX is not setCONFIG_HID_ROCCAT=y
# CONFIG_HID_SAITEK is not setCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not setCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=yCONFIG_GREENASIA_FF=yCONFIG_HID_SMARTJOYPLUS=yCONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not setCONFIG_HID_TOPSEED=yCONFIG_HID_THRUSTMASTER=yCONFIG_THRUSTMASTER_FF=yCONFIG_HID_ZEROPLUS=yCONFIG_ZEROPLUS_FF=yCONFIG_HID_ZYDACRON=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB_ARCH_HAS_XHCI=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_DWC3 is not setCONFIG_USB_MON=yCONFIG_USB_WUSB=yCONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not setCONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_U132_HCD=yCONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not setCONFIG_USB_SL811_CS=yCONFIG_USB_R8A66597_HCD=yCONFIG_USB_WHCI_HCD=yCONFIG_USB_HWA_HCD=y
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_STORAGE_ENE_UB6250 is not set CONFIG_USB_UAS=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not setCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=yCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=yCONFIG_USB_SERIAL_DIGI_ACCELEPORT=yCONFIG_USB_SERIAL_CP210X=yCONFIG_USB_SERIAL_CYPRESS_M8=yCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=yCONFIG_USB_SERIAL_FUNSOFT=yCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=yCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=yCONFIG_USB_SERIAL_EDGEPORT_TI=y
# CONFIG_USB_SERIAL_F81232 is not setCONFIG_USB_SERIAL_GARMIN=yCONFIG_USB_SERIAL_IPW=yCONFIG_USB_SERIAL_IUU=yCONFIG_USB_SERIAL_KEYSPAN_PDA=yCONFIG_USB_SERIAL_KEYSPAN=yCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not setCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7715_PARPORT=yCONFIG_USB_SERIAL_MOS7840=yCONFIG_USB_SERIAL_MOTOROLA=yCONFIG_USB_SERIAL_NAVMAN=yCONFIG_USB_SERIAL_PL2303=yCONFIG_USB_SERIAL_OTI6858=yCONFIG_USB_SERIAL_QCAUX=yCONFIG_USB_SERIAL_QUALCOMM=yCONFIG_USB_SERIAL_SPCP8X5=yCONFIG_USB_SERIAL_HP4X=yCONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not setCONFIG_USB_SERIAL_SIEMENS_MPI=yCONFIG_USB_SERIAL_SIERRAWIRELESS=yCONFIG_USB_SERIAL_SYMBOL=yCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=yCONFIG_USB_SERIAL_XIRCOM=yCONFIG_USB_SERIAL_WWAN=yCONFIG_USB_SERIAL_OPTION=yCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=yCONFIG_USB_SERIAL_VIVOPAY_SERIAL=yCONFIG_USB_SERIAL_ZIO=yCONFIG_USB_SERIAL_SSU100=y
# CONFIG_USB_SERIAL_QT2 is not setCONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=yCONFIG_USB_IDMOUSE=yCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=yCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_ISIGHTFW=yCONFIG_USB_YUREX=y
#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not setCONFIG_USB_ATM=yCONFIG_USB_SPEEDTOUCH=yCONFIG_USB_CXACRU=yCONFIG_USB_UEAGLEATM=yCONFIG_USB_XUSBATM=yCONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not setCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not setCONFIG_NOP_USB_XCEIV=yCONFIG_UWB=yCONFIG_UWB_HWA=yCONFIG_UWB_WHCI=yCONFIG_UWB_I1480U=yCONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_MINORS=8CONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PCI=yCONFIG_MMC_RICOH_MMC=yCONFIG_MMC_SDHCI_PLTFM=yCONFIG_MMC_WBSD=yCONFIG_MMC_TIFM_SD=yCONFIG_MMC_SPI=yCONFIG_MMC_SDRICOH_CS=yCONFIG_MMC_CB710=yCONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not setCONFIG_MMC_USHC=yCONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not setCONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not setCONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not setCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA9633 is not setCONFIG_LEDS_DAC124S085=yCONFIG_LEDS_REGULATOR=yCONFIG_LEDS_BD2802=yCONFIG_LEDS_INTEL_SS4200=yCONFIG_LEDS_LT3593=yCONFIG_LEDS_DELL_NETBOOKS=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not setCONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_IDE_DISK=yCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not setCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y CONFIG_INFINIBAND=y CONFIG_INFINIBAND_USER_MAD=y CONFIG_INFINIBAND_USER_ACCESS=y CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=y CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPATH=y CONFIG_INFINIBAND_QIB=y CONFIG_INFINIBAND_AMSO1100=y # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=y # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_INFINIBAND_CXGB4=y CONFIG_MLX4_INFINIBAND=y CONFIG_INFINIBAND_NES=y # CONFIG_INFINIBAND_NES_DEBUG is not set # CONFIG_INFINIBAND_OCRDMA is not set CONFIG_INFINIBAND_IPOIB=y CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=y CONFIG_INFINIBAND_ISER=y CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_AMD64=y
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not setCONFIG_EDAC_E752X=yCONFIG_EDAC_I82975X=yCONFIG_EDAC_I3000=yCONFIG_EDAC_I3200=yCONFIG_EDAC_X38=yCONFIG_EDAC_I5400=yCONFIG_EDAC_I7CORE=yCONFIG_EDAC_I5000=yCONFIG_EDAC_I5100=yCONFIG_EDAC_I7300=y
# CONFIG_EDAC_SBRIDGE is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not setCONFIG_RTC_DRV_TEST=y
952 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Hi,
This is interesting .. suspend fix breaking boot on kvm.
We complied and booted fine with mainline kernels including 3.5-rc2 with this fix on servers and laptops.
So wondering how different is booting on machines Vs
from kvm ?
Also, are you seeing smooth boot on kvm by reverting only this patch ?
Cheers
Deepthi
Quoted 170 lines · On 06/22/2012 01:05 PM, [email protected] wrote:
Hi Deepthi,
It seems that commit de08622 triggers a boot hang in my kvm boot test.
kvm -cpu kvm64 -enable-kvm \ -kernel ./gpxelinux.lkrn \ -initrd ./kvm.gpxe \ -m 384M \ -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=e1000 \ -net user,vlan=0,hostfwd=tcp::$port-:22 \ -boot order=nc \ -no-reboot \ -watchdog i6300esb \ $(qemu_drives) \ -pidfile $pidfile \ -serial file:$dmesgtree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: de08622731417ba429fc470ab8f2d7c260cb5c72 commit: de08622731417ba429fc470ab8f2d7c260cb5c72 [9/9] PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. config: x86_64-allyesdebian (attached as .config)x86_64-allyesdebian bbbbbbbbbB
--
8: b 0eb8c06 2012-06-19 22:23:37 +0200 PM / Sleep: Separate printing suspend times frominitcall_debug
9: B de08622 boot hang after [ 81.370898] usbcore: registered new interface driver dw2102legend: [b] boot fine [B] boot error
commit
de08622731417ba429fc470ab8f2d7c260cb5c72Author: Deepthi Dharwar <[email protected]> Date: Wed Jun 13 16:28:17 2012 +0530PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Commit
e978aa7d7d57d04eb5f88a7507c4fb98577def77( cpuidle: Movedev->last_residencyupdate to driver enter routine; removedev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164This was fixed in commit
3439a8da16bcad6b0982ece938c9f8299bb53584(ACPI / cpuidle: Removeacpi_idle_suspend(to fix suspend regression) by removingacpi_idle_suspendflag.
- https://lkml.org/lkml/2011/11/14/74But this fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commite978aa7dbroke suspend and with commit3439a8daresume was not working withacpi_idledriver.This patch fixes the regression that caused this issue in the first place.
acpi_idle_suspendflag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commitb04e7bdb984)
So reverting the commit3439a8dais essential.By default, irqs are disabled in
cpu_idlearch specific call and re-enabled in idle state return path . As theacpi_idle_suspendflag was being set during suspend, which prevented the cpus going to deeper idle states, it is essential to
enabling the irqs in its return path too.To address the suspend issue,
we were not re-enabling the interrupts while returning fromacpi_idle_enter_bm()routine ifacpi_idle_suspendflag is set. and this was causing suspend failure.In addition to the above fix, a sanity check has also been added in x86 arch specific
cpu_idlecall to ensure that the idle call always returns with IRQs enabled.Signed-off-by Deepthi Dharwar <[email protected]>Reported-and-Tested-by Dav Hansen <[email protected]>Tested-by Preeti Murthy <[email protected]>Reviewed-by Srivatsa S Bhat <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>arch/x86/kernel/process.c +6
-0@@ -460,6 +460,12 @@ void cpu_idle(void)pm_idle ();rcu_idle_exit (); + +/* +* Sanity check to ensure that idle call returns +* with IRQs enabled +*/ +WARN_ON (irqs_disabled ());start_critical_timings ();/* In many cases the interrupt that ended idle drivers/acpi/processor_idle.c +28
-0@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* @@ -901,6 +922,13 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,if (unlikely (!pr))return -EINVAL ; +if (acpi_idle_suspend) { +if (irqs_disabled ()) +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (!cx->bm_sts_skip &&acpi_idle_bm_check ()) {if (drv->safe_state_index >=0 ) { return drv->states[drv->safe_state_index].enter(dev,
Hi Deepthi,
I can no longer reproduce this issue... Sorry for the noise!
Thanks,
Fengguang
Quoted 187 lines · Deepthi Dharwar
Hi,
This is interesting .. suspend fix breaking boot on kvm.
We complied and booted fine with mainline kernels including 3.5-rc2 with this fix on servers and laptops.
So wondering how different is booting on machines Vs
from kvm ?Also, are you seeing smooth boot on kvm by reverting only this patch ?
Cheers
DeepthiQuoted 170 lines · On 06/22/2012 01:05 PM, [email protected] wrote:
Hi Deepthi,
It seems that commit de08622 triggers a boot hang in my kvm boot test.
kvm -cpu kvm64 -enable-kvm \ -kernel ./gpxelinux.lkrn \ -initrd ./kvm.gpxe \ -m 384M \ -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=e1000 \ -net user,vlan=0,hostfwd=tcp::$port-:22 \ -boot order=nc \ -no-reboot \ -watchdog i6300esb \ $(qemu_drives) \ -pidfile $pidfile \ -serial file:$dmesgtree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: de08622731417ba429fc470ab8f2d7c260cb5c72 commit: de08622731417ba429fc470ab8f2d7c260cb5c72 [9/9] PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. config: x86_64-allyesdebian (attached as .config)x86_64-allyesdebian bbbbbbbbbB
--
8: b 0eb8c06 2012-06-19 22:23:37 +0200 PM / Sleep: Separate printing suspend times frominitcall_debug
9: B de08622 boot hang after [ 81.370898] usbcore: registered new interface driver dw2102legend: [b] boot fine [B] boot error
commit
de08622731417ba429fc470ab8f2d7c260cb5c72Author: Deepthi Dharwar <[email protected]> Date: Wed Jun 13 16:28:17 2012 +0530PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Commit
e978aa7d7d57d04eb5f88a7507c4fb98577def77( cpuidle: Movedev->last_residencyupdate to driver enter routine; removedev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164This was fixed in commit
3439a8da16bcad6b0982ece938c9f8299bb53584(ACPI / cpuidle: Removeacpi_idle_suspend(to fix suspend regression) by removingacpi_idle_suspendflag.
- https://lkml.org/lkml/2011/11/14/74But this fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commite978aa7dbroke suspend and with commit3439a8daresume was not working withacpi_idledriver.This patch fixes the regression that caused this issue in the first place.
acpi_idle_suspendflag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commitb04e7bdb984)
So reverting the commit3439a8dais essential.By default, irqs are disabled in
cpu_idlearch specific call and re-enabled in idle state return path . As theacpi_idle_suspendflag was being set during suspend, which prevented the cpus going to deeper idle states, it is essential to
enabling the irqs in its return path too.To address the suspend issue,
we were not re-enabling the interrupts while returning fromacpi_idle_enter_bm()routine ifacpi_idle_suspendflag is set. and this was causing suspend failure.In addition to the above fix, a sanity check has also been added in x86 arch specific
cpu_idlecall to ensure that the idle call always returns with IRQs enabled.Signed-off-by Deepthi Dharwar <[email protected]>Reported-and-Tested-by Dav Hansen <[email protected]>Tested-by Preeti Murthy <[email protected]>Reviewed-by Srivatsa S Bhat <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>arch/x86/kernel/process.c +6
-0@@ -460,6 +460,12 @@ void cpu_idle(void)pm_idle ();rcu_idle_exit (); + +/* +* Sanity check to ensure that idle call returns +* with IRQs enabled +*/ +WARN_ON (irqs_disabled ());start_critical_timings ();/* In many cases the interrupt that ended idle drivers/acpi/processor_idle.c +28
-0@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* @@ -901,6 +922,13 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,if (unlikely (!pr))return -EINVAL ; +if (acpi_idle_suspend) { +if (irqs_disabled ()) +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (!cx->bm_sts_skip &&acpi_idle_bm_check ()) {if (drv->safe_state_index >=0 ) { return drv->states[drv->safe_state_index].enter(dev,
Quoted 3 lines · Fengguang Wu
Hi Deepthi,
I can no longer reproduce this issue... Sorry for the noise!
But I do, 100% of the time on real hardware which is Acer Ferrari One.
The symptom is that the new WARN_ON() triggers pretty much on every cpuidle transition for me which makes the machine unuseable.
That may be a result of a different bug, but the box evidently works without the hunk in arch/x86/kernel/process.c, so I'd prefer to drop it for now.
Moreover, I have a couple of questions regarding the implementation.
First, why are we returning -EINVAL if acpi_idle_suspend is set? Surely, something like -EBUSY or -EAGAIN would be better here, wouldn't it?
Second, is the cpu_relax() before returning really necessary?
Finally, the hunk in acpi_idle_enter_bm() still looks ugly. I'd prefer something like this instead:
@@ -907,7 +928,10 @@ static int acpi_idle_enter_bm(struct cpu
drv, drv->safe_state_index);
} else {
local_irq_disable();
- acpi_safe_halt();
+
+ if (!acpi_idle_suspend)
+ acpi_safe_halt();
+
local_irq_enable();
return -EINVAL;
}
@@ -915,6 +939,12 @@ static int acpi_idle_enter_bm(struct cpu
local_irq_disable();
+ if (acpi_idle_suspend) {
+ local_irq_enable();
+ cpu_relax();
+ return -EBUSY;
+ }
+
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING; /*
Hmm?
The patch has been dropped from the linux-pm tree (hopefully for now).
Thanks,
Rafael
Quoted 190 lines · Deepthi Dharwar
Quoted 187 lines
Hi,
This is interesting .. suspend fix breaking boot on kvm.
We complied and booted fine with mainline kernels including 3.5-rc2 with this fix on servers and laptops.
So wondering how different is booting on machines Vs
from kvm ?Also, are you seeing smooth boot on kvm by reverting only this patch ?
Cheers
DeepthiQuoted 170 lines · On 06/22/2012 01:05 PM, [email protected] wrote:
Hi Deepthi,
It seems that commit de08622 triggers a boot hang in my kvm boot test.
kvm -cpu kvm64 -enable-kvm \ -kernel ./gpxelinux.lkrn \ -initrd ./kvm.gpxe \ -m 384M \ -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=e1000 \ -net user,vlan=0,hostfwd=tcp::$port-:22 \ -boot order=nc \ -no-reboot \ -watchdog i6300esb \ $(qemu_drives) \ -pidfile $pidfile \ -serial file:$dmesgtree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: de08622731417ba429fc470ab8f2d7c260cb5c72 commit: de08622731417ba429fc470ab8f2d7c260cb5c72 [9/9] PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. config: x86_64-allyesdebian (attached as .config)x86_64-allyesdebian bbbbbbbbbB
--
8: b 0eb8c06 2012-06-19 22:23:37 +0200 PM / Sleep: Separate printing suspend times frominitcall_debug
9: B de08622 boot hang after [ 81.370898] usbcore: registered new interface driver dw2102legend: [b] boot fine [B] boot error
commit
de08622731417ba429fc470ab8f2d7c260cb5c72Author: Deepthi Dharwar <[email protected]> Date: Wed Jun 13 16:28:17 2012 +0530PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Commit
e978aa7d7d57d04eb5f88a7507c4fb98577def77( cpuidle: Movedev->last_residencyupdate to driver enter routine; removedev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164This was fixed in commit
3439a8da16bcad6b0982ece938c9f8299bb53584(ACPI / cpuidle: Removeacpi_idle_suspend(to fix suspend regression) by removingacpi_idle_suspendflag.
- https://lkml.org/lkml/2011/11/14/74But this fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commite978aa7dbroke suspend and with commit3439a8daresume was not working withacpi_idledriver.This patch fixes the regression that caused this issue in the first place.
acpi_idle_suspendflag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commitb04e7bdb984)
So reverting the commit3439a8dais essential.By default, irqs are disabled in
cpu_idlearch specific call and re-enabled in idle state return path . As theacpi_idle_suspendflag was being set during suspend, which prevented the cpus going to deeper idle states, it is essential to
enabling the irqs in its return path too.To address the suspend issue,
we were not re-enabling the interrupts while returning fromacpi_idle_enter_bm()routine ifacpi_idle_suspendflag is set. and this was causing suspend failure.In addition to the above fix, a sanity check has also been added in x86 arch specific
cpu_idlecall to ensure that the idle call always returns with IRQs enabled.Signed-off-by Deepthi Dharwar <[email protected]>Reported-and-Tested-by Dav Hansen <[email protected]>Tested-by Preeti Murthy <[email protected]>Reviewed-by Srivatsa S Bhat <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>arch/x86/kernel/process.c +6
-0@@ -460,6 +460,12 @@ void cpu_idle(void)pm_idle ();rcu_idle_exit (); + +/* +* Sanity check to ensure that idle call returns +* with IRQs enabled +*/ +WARN_ON (irqs_disabled ());start_critical_timings ();/* In many cases the interrupt that ended idle drivers/acpi/processor_idle.c +28
-0@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* @@ -901,6 +922,13 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,if (unlikely (!pr))return -EINVAL ; +if (acpi_idle_suspend) { +if (irqs_disabled ()) +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (!cx->bm_sts_skip &&acpi_idle_bm_check ()) {if (drv->safe_state_index >=0 ) { return drv->states[drv->safe_state_index].enter(dev,
Quoted 5 lines · Rafael J. Wysocki
Quoted 3 lines · Fengguang Wu
Hi Deepthi,
I can no longer reproduce this issue... Sorry for the noise!
Quoted 8 lines
But I do, 100% of the time on real hardware which is Acer Ferrari One.
The symptom is that the new
WARN_ON()triggers pretty much on every cpuidle transition for me which makes the machine unuseable.That may be a result of a different bug, but the box evidently works without the hunk in
arch/x86/kernel/process.c, so I'd prefer to drop it for now.
If cpu is coming out of cpuidle with WARN_ON every-time, is suspend on this device working ? Wanted to get some clarity about this hardware . We can remove this check for now.
Quoted 5 lines
Moreover, I have a couple of questions regarding the implementation.
First, why are we returning
-EINVALifacpi_idle_suspendis set? Surely, something like-EBUSYor-EAGAINwould be better here, wouldn't it?
Any negative return value will serve the purpose. We put it as -EINVAL as cpu_idle operation during suspend was termed invalid. I will change it to -EBUSY for better readability.
Quoted 1 line
Second, is the
cpu_relax()before returning really necessary?
cpu_relax operation is mainly to lower CPU power consumption. If the system is idle, we would want to at-least reduce power consumption. Better than busy looping in and out of idle when suspend is triggered. There is no harm having it.
Quoted 30 lines
Finally, the hunk in
acpi_idle_enter_bm()still looks ugly. I'd prefer something like this instead:drivers/acpi/processor_idle.c +10
-1@@ -907,7 +928,10 @@ static int acpi_idle_enter_bm(struct cpu drv, drv->safe_state_index); }else {local_irq_disable (); -acpi_safe_halt (); + +if (!acpi_idle_suspend) +acpi_safe_halt (); +local_irq_enable ();return -EINVAL ; }@@ -915,6 +939,12 @@ static int acpi_idle_enter_bm(struct cpulocal_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/*
Quoted 1 line
Hmm?
Yes, I'll will re-factor the code.
Quoted 197 lines
The patch has been dropped from the linux-pm tree (hopefully for now).
Thanks,
RafaelQuoted 177 lines · Deepthi Dharwar
Quoted 176 lines
Hi,
This is interesting .. suspend fix breaking boot on kvm.
We complied and booted fine with mainline kernels including 3.5-rc2 with this fix on servers and laptops.
So wondering how different is booting on machines Vs
from kvm ?Also, are you seeing smooth boot on kvm by reverting only this patch ?
Cheers
DeepthiQuoted 160 lines · On 06/22/2012 01:05 PM, [email protected] wrote:
Hi Deepthi,
It seems that commit de08622 triggers a boot hang in my kvm boot test.
kvm -cpu kvm64 -enable-kvm \ -kernel ./gpxelinux.lkrn \ -initrd ./kvm.gpxe \ -m 384M \ -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=e1000 \ -net user,vlan=0,hostfwd=tcp::$port-:22 \ -boot order=nc \ -no-reboot \ -watchdog i6300esb \ $(qemu_drives) \ -pidfile $pidfile \ -serial file:$dmesgtree: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next head: de08622731417ba429fc470ab8f2d7c260cb5c72 commit: de08622731417ba429fc470ab8f2d7c260cb5c72 [9/9] PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. config: x86_64-allyesdebian (attached as .config)x86_64-allyesdebian bbbbbbbbbB
--
8: b 0eb8c06 2012-06-19 22:23:37 +0200 PM / Sleep: Separate printing suspend times frominitcall_debug
9: B de08622 boot hang after [ 81.370898] usbcore: registered new interface driver dw2102legend: [b] boot fine [B] boot error
commit
de08622731417ba429fc470ab8f2d7c260cb5c72Author: Deepthi Dharwar <[email protected]> Date: Wed Jun 13 16:28:17 2012 +0530PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.
Commit
e978aa7d7d57d04eb5f88a7507c4fb98577def77( cpuidle: Movedev->last_residencyupdate to driver enter routine; removedev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164This was fixed in commit
3439a8da16bcad6b0982ece938c9f8299bb53584(ACPI / cpuidle: Removeacpi_idle_suspend(to fix suspend regression) by removingacpi_idle_suspendflag.
- https://lkml.org/lkml/2011/11/14/74But this fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commite978aa7dbroke suspend and with commit3439a8daresume was not working withacpi_idledriver.This patch fixes the regression that caused this issue in the first place.
acpi_idle_suspendflag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commitb04e7bdb984)
So reverting the commit3439a8dais essential.By default, irqs are disabled in
cpu_idlearch specific call and re-enabled in idle state return path . As theacpi_idle_suspendflag was being set during suspend, which prevented the cpus going to deeper idle states, it is essential to
enabling the irqs in its return path too.To address the suspend issue,
we were not re-enabling the interrupts while returning fromacpi_idle_enter_bm()routine ifacpi_idle_suspendflag is set. and this was causing suspend failure.In addition to the above fix, a sanity check has also been added in x86 arch specific
cpu_idlecall to ensure that the idle call always returns with IRQs enabled.Signed-off-by Deepthi Dharwar <[email protected]>Reported-and-Tested-by Dav Hansen <[email protected]>Tested-by Preeti Murthy <[email protected]>Reviewed-by Srivatsa S Bhat <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>arch/x86/kernel/process.c +6
-0@@ -460,6 +460,12 @@ void cpu_idle(void)pm_idle ();rcu_idle_exit (); + +/* +* Sanity check to ensure that idle call returns +* with IRQs enabled +*/ +WARN_ON (irqs_disabled ());start_critical_timings ();/* In many cases the interrupt that ended idle drivers/acpi/processor_idle.c +21
-0@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* @@ -901,6 +922,13 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,if (unlikely (!pr))return -EINVAL ;Quoted 13 lines
Quoted 11 lines
drivers/acpi/processor_idle.c static int acpi_idle_enter_bm(struct cpuidle_device *dev, · line 934
Quoted 10 lines
drivers/acpi/processor_idle.c +7
-0+if (acpi_idle_suspend) { +if (irqs_disabled ()) +local_irq_enable (); +cpu_relax (); +return -EINVAL ; + } +if (!cx->bm_sts_skip &&acpi_idle_bm_check ()) {if (drv->safe_state_index >=0 ) { return drv->states[drv->safe_state_index].enter(dev,
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Cheers,
Deepthi
Quoted 12 lines · Deepthi Dharwar
Quoted 10 lines · Rafael J. Wysocki
Quoted 3 lines · Fengguang Wu
Hi Deepthi,
I can no longer reproduce this issue... Sorry for the noise!
But I do, 100% of the time on real hardware which is Acer Ferrari One.
The symptom is that the new
WARN_ON()triggers pretty much on every cpuidle transition for me which makes the machine unuseable.
Quoted 6 lines
Quoted 3 lines
That may be a result of a different bug, but the box evidently works without the hunk in
arch/x86/kernel/process.c, so I'd prefer to drop it for now.If cpu is coming out of cpuidle with
WARN_ONevery-time, is suspend on this device working ?
Yes, it is.
Quoted 2 lines
Wanted to get some clarity about this hardware .
We can remove this check for now.
OK
Quoted 10 lines
Quoted 5 lines
Moreover, I have a couple of questions regarding the implementation.
First, why are we returning
-EINVALifacpi_idle_suspendis set? Surely, something like-EBUSYor-EAGAINwould be better here, wouldn't it?Any negative return value will serve the purpose. We put it as
-EINVALascpu_idleoperation during suspend was termed invalid. I will change it to-EBUSYfor better readability.
OK
Quoted 7 lines
Quoted 1 line
Second, is the
cpu_relax()before returning really necessary?
cpu_relaxoperation is mainly to lower CPU power consumption. If the system is idle, we would want to at-least reduce power consumption. Better than busy looping in and out of idle when suspend is triggered. There is no harm having it.
It seems kind of redundant, though. The system is suspending at this point, so the increased power consumption, if any, shouldn't be that much anyway, right?
Quoted 29 lines
Quoted 29 lines
Finally, the hunk in
acpi_idle_enter_bm()still looks ugly. I'd prefer something like this instead:drivers/acpi/processor_idle.c +10
-1@@ -907,7 +928,10 @@ static int acpi_idle_enter_bm(struct cpu drv, drv->safe_state_index); }else {local_irq_disable (); -acpi_safe_halt (); + +if (!acpi_idle_suspend) +acpi_safe_halt (); +local_irq_enable ();return -EINVAL ; }@@ -915,6 +939,12 @@ static int acpi_idle_enter_bm(struct cpulocal_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/*
Quoted 4 lines
Quoted 1 line
Hmm?
Yes, I'll will re-factor the code.
Good.
Thanks,
Rafael
From: Deepthi Dharwar <[email protected]>
Fix suspend/resume regression caused by cpuidle cleanup.
Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164
This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584 (ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) by removing acpi_idle_suspend flag.
- https://lkml.org/lkml/2011/11/14/74
But this did fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commit e978aa7d broke suspend and with commit 3439a8da resume was not working with acpi_idle driver.
This patch fixes the regression that caused this issue in the first place. acpi_idle_suspend flag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commit b04e7bdb984 )
So reverting the commit 3439a8da is essential.
By default, irqs are disabled in cpu_idle arch specific call and re-enabled in idle state return path . During suspend, the acpi_idle_suspend flag is set, which
prevents the cpus from going to deeper idle states, it is essential to enabling the irqs in this return path too.
To address the suspend issue,
we were not re-enabling the interrupts while returning from acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set. and this caused suspend failure.
In addition to the above, to improve the readability of the code, return of -ENIVAL is replaced with -EBUSY in acpi_idle_suspend return path. Implying that the system is currently busy when suspend is in progress, which prevents the cpus from entering deeper C-states.
---
This patch applies on 3.5-rc2
--- drivers/acpi/processor_idle.c | 32 ++++++++++++++++++++++++++++++-- 1 files changed, 30 insertions(+), 2 deletions(-)
drivers/acpi/processor_idle.c +30 -2
@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )
@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }
@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);
@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/*
@@ -907,14 +928,21 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, drv, drv->safe_state_index); }else {local_irq_disable (); -acpi_safe_halt (); +if (!acpi_idle_suspend) +acpi_safe_halt ();local_irq_enable (); -return -EINVAL ; +return -EBUSY ; } }local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/*
Cheers,
Deepthi
Quoted 43 lines · Deepthi Dharwar
From: Deepthi Dharwar <[email protected]>
Fix suspend/resume regression caused by cpuidle cleanup.
Commit
e978aa7d7d57d04eb5f88a7507c4fb98577def77( cpuidle: Movedev->last_residencyupdate to driver enter routine; removedev->last_state) was breaking suspend on laptops, as reported in the below link
- https://lkml.org/lkml/2011/11/11/164This was fixed in commit
3439a8da16bcad6b0982ece938c9f8299bb53584(ACPI / cpuidle: Removeacpi_idle_suspend(to fix suspend regression) by removingacpi_idle_suspendflag.
- https://lkml.org/lkml/2011/11/14/74But this did fix did not work on all systems
as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave.
- https://lkml.org/lkml/2012/5/27/115
It looked like with commite978aa7dbroke suspend and with commit3439a8daresume was not working withacpi_idledriver.This patch fixes the regression that caused this issue in the first place.
acpi_idle_suspendflag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commitb04e7bdb984)
So reverting the commit3439a8dais essential.By default, irqs are disabled in
cpu_idlearch specific call and re-enabled in idle state return path . During suspend, theacpi_idle_suspendflag is set, which
prevents the cpus from going to deeper idle states, it is essential to enabling the irqs in this return path too.To address the suspend issue,
we were not re-enabling the interrupts while returning fromacpi_idle_enter_bm()routine ifacpi_idle_suspendflag is set. and this caused suspend failure.In addition to the above, to improve the readability of the code, return of
-ENIVALis replaced with-EBUSYinacpi_idle_suspendreturn path. Implying that the system is currently busy when suspend is in progress, which prevents the cpus from entering deeper C-states.
Quoted 8 lines
---
This patch applies on 3.5-rc2Reported-and-Tested-by Dav Hansen <[email protected]>Tested-by Preeti Murthy <[email protected]>Signed-off-by Deepthi Dharwar <[email protected]>Reviewed-by Srivatsa S Bhat <[email protected]>Signed-off-by Rafael J. Wysocki <[email protected]>
Looking good. I'll give it a bit of testing and put it into linux-next for a day or two to make sure nobody sees any more problems with it.
Thanks,
Rafael
Quoted 94 lines
--- drivers/acpi/processor_idle.c | 32 ++++++++++++++++++++++++++++++-- 1 files changed, 30 insertions(+), 2 deletions(-)drivers/acpi/processor_idle.c +30
-2@@ -224,6 +224,7 @@ static void lapic_timer_state_broadcast(struct acpi_processor *pr,/* * Suspend / resume control */ +static int acpi_idle_suspend;static u32 saved_bm_rld;static void acpi_idle_bm_rld_save (void )@@ -242,13 +243,21 @@ static void acpi_idle_bm_rld_restore(void)int acpi_processor_suspend (struct acpi_device * device,pm_message_t state) { +if (acpi_idle_suspend ==1 ) +return 0 ; +acpi_idle_bm_rld_save (); + acpi_idle_suspend =1 ;return 0 ; }int acpi_processor_resume (struct acpi_device * device) { +if (acpi_idle_suspend ==0 ) +return 0 ; +acpi_idle_bm_rld_restore (); + acpi_idle_suspend =0 ;return 0 ; }@@ -754,6 +763,12 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +lapic_timer_state_broadcast (pr, cx,1 ); kt1 =ktime_get_real ();acpi_idle_do_entry (cx);@@ -823,6 +838,12 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* @@ -907,14 +928,21 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, drv, drv->safe_state_index); }else {local_irq_disable (); -acpi_safe_halt (); +if (!acpi_idle_suspend) +acpi_safe_halt ();local_irq_enable (); -return -EINVAL ; +return -EBUSY ; } }local_irq_disable (); +if (acpi_idle_suspend) { +local_irq_enable (); +cpu_relax (); +return -EBUSY ; + } +if (cx->entry_method !=ACPI_CSTATE_FFH ) {current_thread_info ()->status &= ~TS_POLLING ;/* Cheers,
Deepthi