Skip to contentSkip to conversation

Questions about tripple display

DISCUSSION Guo Tang 2 participants 5 messages Jul 13, 2012

lore
Share & tools
lore

Guo Tang

author
#0 lore raw

Hi,
Greetings!

I have a system with GM 45 chip set. I want to have 3 displays: LVDS, VGA, and TV output. There is no need for them to show different contents. So only clone display is required. From GM 45 chip set spec, looks like only 2 display ports can be active at the same time. Is it possible to modify driver to get 3 clone displays? Any suggestion to where in the driver/Kernel I can poke around would be appreciated.

Thanks,
Guo

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#1 lore raw
Quoted 10 lines · Guo Tang

Hi,
Greetings!

I have a system with GM 45 chip set. I want to have 3 displays: LVDS, VGA, and TV output. There is no need for
them to show different contents. So only clone display is required. From GM 45 chip set spec, looks like only 2
display ports can be active at the same time. Is it possible to modify driver to get 3 clone displays? Any suggestion
to where in the driver/Kernel I can poke around would be appreciated.

This does not work, because both LVDS and TV run on a fixed clock (which does not necessarily agree with the dotclock of the mode), hence you can't clone them. At least not in all cases, and imo trying to support such a configuration in more cases is wasted effort. If you need to drive that many outputs, you're not in the market of a low-end igd solution like gm45 imho.

Cheers, Daniel

Signature · 2 lines
Daniel Vetter
[email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
author
#2 lore raw

Hi, Daniel,

Thanks for the prompt reply. From your reply looks like I still have a little hope.

How about if I only run 1024x768@60Hz or 30Hz resolution? Will that address the dotclock problem
between LVDS and TV?

Thanks,
Guo

Quoted 21 lines · Daniel Vetter
Quoted 4 lines · Guo Tang

Hi,
Greetings!

I have a system with GM 45 chip set. I want to have 3 displays: LVDS,

VGA,

Quoted 2 lines

and TV output. There is no need for
them to show different contents. So only clone display is required. From

GM

Quoted 4 lines

45 chip set spec, looks like only 2
display ports can be active at the same time. Is it possible to modify driver to get 3 clone displays? Any suggestion
to where in the driver/Kernel I can poke around would be appreciated.

This does not work, because both LVDS and TV run on a fixed clock (which does not necessarily agree with the dotclock of the mode), hence you can't clone them. At least not in all cases, and imo trying to support such a configuration in more cases is wasted effort. If you need to drive that many outputs, you're not in the market of a low-end igd solution like gm45 imho.

Quoted 5 lines

Cheers, Daniel
--
Daniel Vetter
[email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
Quoted 8 lines · Guo Tang

Hi, Daniel,

Thanks for the prompt reply. From your reply looks like I still have a little hope.

How about if I only run 1024x768@60Hz or 30Hz resolution? Will that address the dotclock problem
between LVDS and TV?

As I've said, carefully picking a dotclock that matches up with TV or LVDS can work, but we don't bother to support that in the driver because imo it's not worth the hassle. If you really want to stitch something like this together, grep for needs_tvclock in the drm/i915 sources (or check out the lvds panel fitter code). I.e. it's by far not as simple as just picking the same mode as e.g. on the TV. And you'd need to restructure the kernel driver quite a bit to make it work.
-Daniel

Signature · 2 lines
Daniel Vetter
[email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch
author
#4 lore raw

Great! Thanks for the direction. We will give it a shoot!

- Guo

Quoted 11 lines · Daniel Vetter
Quoted 6 lines · Guo Tang

Hi, Daniel,

Thanks for the prompt reply. From your reply looks like I still have a little hope.

How about if I only run 1024x768@60Hz or 30Hz resolution? Will that

address

Quoted 2 lines

the dotclock problem
between LVDS and TV?

Quoted 13 lines

As I've said, carefully picking a dotclock that matches up with TV or LVDS can work, but we don't bother to support that in the driver because imo it's not worth the hassle. If you really want to stitch something like this together, grep for needs_tvclock in the drm/i915 sources (or check out the lvds panel fitter code). I.e. it's by far not as simple as just picking the same mode as e.g. on the TV. And you'd need to restructure the kernel driver quite a bit to make it work.
-Daniel
--
Daniel Vetter
[email protected] - +41 (0) 79 364 57 48 - http://blog.ffwll.ch

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx