kirkwood: add support for Iomega iConnect board
PATCH 1/1 kirkwood: add support for Iomega iConnect board
Add support for new board iConnect from Iomega.
More information about the device can be found here:
Signed-off-by Luka Perkov <[email protected]>
Tested-by Wojciech Dubowik <[email protected]>
Tested-by Tim Fletcher <[email protected]>
---
MAINTAINERS | 1 + board/iomega/iconnect/Makefile | 43 ++++++++++ board/iomega/iconnect/iconnect.c | 107 +++++++++++++++++++++++ board/iomega/iconnect/iconnect.h | 39 +++++++++ board/iomega/iconnect/kwbimage.cfg | 165 ++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/iconnect.h | 131 ++++++++++++++++++++++++++++ 7 files changed, 487 insertions(+)
MAINTAINERS +1 -0
@@ -787,6 +787,7 @@ Linus Walleij <[email protected]> Luka Perkov <[email protected]> ib62x0 ARM926EJS + iconnect ARM926EJS Dave Peverley <[email protected]>
board/iomega/iconnect/Makefile new file +43 -0
43 lines not on this page · raw message
board/iomega/iconnect/iconnect.c new file +107 -0
107 lines not on this page · raw message
board/iomega/iconnect/iconnect.h new file +39 -0
@@ -0,0 +1,39 @@ +/* +* Copyright (C) 2009-2012 +* Wojciech Dubowik <[email protected]> +* Luka Perkov <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __ICONNECT_H +#define __ICONNECT_H + +#define ICONNECT_OE_LOW (~(1 << 7)) +#define ICONNECT_OE_HIGH (~(1 << 10)) +#define ICONNECT_OE_VAL_LOW (0) +#define ICONNECT_OE_VAL_HIGH (1 << 10) + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __ICONNECT_H */
board/iomega/iconnect/kwbimage.cfg new file +165 -0
165 lines not on this page · raw message
boards.cfg +1 -0
@@ -140,6 +140,7 @@ enbw_cmc arm arm926ejs enbw_cmc enbw calimain arm arm926ejs calimain omicron davinci pogo_e02 arm arm926ejs - cloudengines kirkwood dns325 arm arm926ejs - d-link kirkwood +iconnect arm arm926ejs - iomega kirkwood lschlv2 arm arm926ejs lsxl buffalo kirkwood lsxl:LSCHLV2 lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD
include/configs/iconnect.h new file +131 -0
131 lines not on this page · raw message